Strainer

SY-17,37
Y type Basket Duplex Temporary
Stainless steel Nylon Carbon steel Easy plug
Pipe end core One-touch With fine mesh Davit
4
Strainer

Features
1. Cast stainless steel body is rust-less, available for a
wide variety of applications such as food, chemical
industries, and oil.
2. High-flow-rate marine type with the largest possible
filtration area in view of decrease in flow rate caused by
clogging.

Specifications
Model SY-17 SY-37 (strainer with fine mesh)
Application Steam, Air, Cold and hot water, Oil, Other non-dangerous fluids
Maximum pressure 2.0 MPa
Maximum temperature 150°C (250°C) *
Body Cast stainless steel
Material
Screen Stainless steel
Perforation φ 2.5-7.21 holes/cm2
Screen
Mesh Standard 80 mesh 120 to 200 mesh
Gasket PTFE *
Connection JIS Rc screwed
* If the temperature is more than 150˚C, another material is used for the gasket. Please L
d
contact us.
· Available with 20 to 100 mesh screen (SY-17).
· The screen for SY-37, it has become the special specification called screen (P) to
prevent the gap between the screen and the body.
· The Gasket is PTFE up to 150°C.
· Available more than 150°C by changing the material of gasket.
ds

SY-17: 15A-50A (Max Temp: 250°C)

䪻

H1

SY-37: 15A-40A (Max Temp: 250°C, 50A (Max Temp: 175°C)

䱃s

SY-17
Dimensions (mm) and Weights (kg)
Nominal size d L H1 ds s Weight L
15A Rc 1/2 85 55 20 (18) 35 0.40 (0.4) d
20A Rc 3/4 100 69 25 (23) 50 0.68 (0.7)
25A Rc 1 115 83 32 (30) 60 1.01 (1.1)
32A Rc 1-1/4 135 92 40 (38) 70 1.48 (1.6)
40A Rc 1-1/2 150 102 45 (43) 75 1.88 (2.0)
ds
䪻

50A Rc 2 180 117 56 (54) 90 3.34 (3.6)

· The above values in parentheses are the dimensions and weights of the SY-37.
H1
䱃s

SY-37

4 -19 [Link]
 SY-17, 37

SY-17 Strainer Pressure Loss Chart (For Water)

· Screen: Perforation =φ2.5-7.21 holes/cm2, Mesh = 80 mesh

Nominal size
4

Strainer
V: Flow rate L/min

ΔP: Pressure loss MPa

SY-37 Strainer Pressure Loss Chart (For Water)

· Screen: Perforation =φ2.5-7.21 holes/cm2, Mesh = 120 mesh

1000
Nominal size
50A

500 40A

32A
V: Flow rate L/min

25A
20A
100

15A
50

10
0.001 0.005 0.01 0.05 0.1
ΔP: Pressure loss MPa

Please refer to P. -12 for the information about how to look the chart, and calculating example.

[Link] 4 -20