ARI-STEVI® 448 / 449 (DN15-100)

Control valve in straightway form with screwed seat ring

With pneumatic and electric actuators

ARI-STEVI® 448 / 449

Pneumatic actuator
ARI-DP 30-34
• Reversible pneumatic actuator
• Actuator with rolling diaphragm
• Air supply pressure min. 4 bar
• Air supply pressure max. 6 bar
• Stem protection by bellow
• Maintenance-free O-ring sealing
• Assembly of additional devices acc. to
DIN IEC 60534-6
Page 4

Fig. 448
ARI-STEVI® 448 / 449
Electric actuator
ARI-PREMIO-Plus 2G 2,2-15kN
• Digital actuator control
• BLDC-Engine technology
• Energy-efficient
• Enclosure IP 65
• 2 torque switches
• Handwheel
• Additional devices available, e.g. potentiometer

Page 7

Fig. 449

Features:
• Compact design
• Bonnet with rotable traverse
• Optional: Perforated plug for noise reduction
• Replaceable seat
• Reduceable Kvs-values
• Shaft plug guide

Edition 05/15 - Data subject to alteration Datasheet 448001 english

 ARI-STEVI® 448 / 449 (DN15-100)
Technical data
Figure Nominal pressure Material Nominal diameter
12.448 PN16 EN-JL1040 DN15-100
22.448 / 22.449 PN16 EN-JS1049 DN15-100
23.448 / 23.449 PN25 EN-JS1049 DN15-100 Information / restriction of technical rules need to be observed!
25.448 PN40 EN-JS1049 DN15-50 A production permission acc. to TRB 801 No. 45 is available.
32 448 / 32.449 PN16 1.0619+N DN15-100 (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.)
The engineer, designing a system or a plant, is responsible for the selection of
34.448 / 34.449 PN25 1.0619+N DN15-100
the correct valve.
35.448 / 35.449 PN40 1.0619+N DN15-100 Resistance and fitness must be verified, contact manufacturer for information
52 448 / 52.449 PN16 1.4408 DN15-100 (refer to Product overview and Resistance list).

54 448 / 54.449 PN25 1.4408 DN15-100

55.448 / 55.449 PN40 1.4408 DN15-100
Other materials and versions on request.

Stem sealing
Fig. 448 standard optional

I. EPDM-sealing
I. PTFE-V-ring unit -10°C to 150°C
-10°C to 220°C (allowed for water and steam up to 180°C)

Fig. 449 standard optional

III. Stainless steel-bellow with pure graphite-packing III. Stainless steel-bellow with V-ring unit
-60°C to 400°C -60°C to 220°C

Intermediate values for max. permissible operational pressures can be determined by linear
Pressure-temperature-ratings interpolation of the given temperature / pressure chart.

acc. to DIN EN 1092-2 -60°C to <-10°C 1) -10°C to 120°C 150°C 200°C 250°C 300°C 350°C 400°C
EN-JL1040 PN16 (bar) -- 16 14,4 12,8 11,2 9,6 -- --
EN-JS1049 PN16 (bar) -- 16 15,5 14,7 13,9 12,8 11,2 --
EN-JS1049 PN25 (bar) -- 25 24,3 23 21,8 20 17,5 --
EN-JS1049 PN40 (bar) -- 40 38,5 36,8 34,8 32 28 --

acc. to manufacturers standard -60°C to <-10°C 1) -10°C to 120°C 150°C 200°C 250°C 300°C 350°C 400°C
1.0619+N PN25 (bar) 18,7 25 23,9 22 20 17,2 16 14,8
1.0619+N PN40 (bar) 30 40 38,1 35 32 28 25,7 23,8

acc. to DIN EN 1092-1 -60°C to <-10°C 1) -10°C to 100°C 150°C 200°C 250°C 300°C 350°C 400°C
1.4408 PN40 (bar) 40 40 36,3 33,7 31,8 29,7 28,5 27,4
1) Valve with extended bonnet, screws and nuts made of A4-70 (at temperatures below -10°C)

2
 ARI-STEVI® 448 / 449 (DN15-100)
Plug design

Plug design standard Guiding Rangeability

- Leakage class IV acc. to DIN EN 60534-4

- from Kvs 0,1
Parabolic plug,
- Flow characteristic: Shaft 50 : 1
metal seat
- modified equal percentage (glp)
- linear (lin) (from Kvs 1)

Plug design optional Guiding Rangeability

- Leakage class IV-S1 acc. to DIN EN 60534-4

- metallic polished
- from Kvs 0,1
Parabolic plug,
increased sealing thightness - Flow characteristic: Shaft 50 : 1
in the seat - modified equal percentage (glp)
- linear (lin)
(special actuator forces necessary,
closing pressures on request)

- Leakage class VI acc. to DIN EN 60534-4

Parabolic plug - from Kvs 1
with PTFE-soft seal - Flow characteristic: Shaft 50 : 1
(max. 200°C)
- modified equal percentage (glp)
- linear (lin)

- Leakage class IV acc. to DIN EN 60534-4

- from Kvs 1
Parabolic plug
- Flow characteristic: Shaft 50 : 1
with armoured sealing edge
- equal percentage (glp) (from Kvs 100 modified)
- linear (lin)

- Leakage class IV aac. to DIN EN 60534-4

- from Kvs 1
Perforated plug - Flow characteristic:
- modified equal percentage (glp) Shaft / Seat ring 30 : 1
metal-seated
- linear (lin)
Flow direction for gases and steam for reduction
of the acoustic level

3
 ARI-STEVI® 448 / 449 (DN15-100)
Pneumatic actuator ARI-DP
Control valve in straightway form with pneumatic actuator ARI-DP

Fig. 448 Fig. 449

Actuator data DP30 DP32 DP33 DP34

ØA (mm) 168 250 300 405
Effective diaphragm area (cm2) 80 250 400 800
Technical data for actuator refer to data sheet ARI-DP.

Dimensions and weights

DN 15 20 25 32 40 50 65 80 100

L (mm) 130 150 160 180 200 230 290 310 350

Fig. 448 DP30 H (mm) 354 354 369 369 384 391
PN16-40 (kg) 8 9 10 12 14 17
DP32 H (mm) 378 393 400 407 429 445
PN16-40 (kg) 17 19 22 28 35 47
DP33 H (mm) 458 480 496
PN16-40 (kg) 34 41 53
DP34 H (mm) 527 549 565
PN16-40 (kg) 64 71 83

Fig. 449 DP30 H (mm) 539 539 547 547 538 540
PN16-40 (kg) 14 15 18 20 27 30
DP32 H (mm) 556 547 549 633 646 662
PN16-40 (kg) 25 32 35 41 52 68
DP33 H (mm) 684 697 713
PN16-40 (kg) 47 58 74
DP34 H (mm) 753 766 782
PN16-40 (kg) 77 88 104

Other dimensions refer to pages 9.  Technical data for actuator refer to data sheet ARI-DP.

4
 ARI-STEVI® 448 / 449 (DN15-100)
Closing pressure: pneumatic actuator ARI-DP

Spring closes on air failure

(stem extended by spring)
max. permissible closing pressures on flow-to-open P2 = 0.
Observe pressure-temperature-limits, refer to page 2.
DN 15 20 25
0,25 / 0,25 / 0,25 /
0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 /
Kvs-value (m3/h) 0,16 / 0,16 / 6,3 0,16 / 6,3 10
Parabolic plug 0,4 1,6 / 1 0,4 1,6 / 1 0,4 1,6 / 1
0,1 0,1 0,1
max. diff. pressure 1) (bar) 40 40 40
2,5 / 2,5 / 2,5 /
Kvs-value (m3/h) -- -- 1,6 / -- -- 1,6 / 4 -- -- 1,6 / 4 6,3
Perforated plug 1 1 1
max. diff. pressure 1) (bar) -- -- 40 -- -- 40 -- -- 40
Seat-Ø (mm) 3 5 12 3 5 12 16 3 5 12 16 22
Travel (mm) 10 10 10
DP30
pressure min.

I. (bar) 40 40 40 40 40 40 40 40 40 40 40 40
Air supply

80 cm2
(bar)

4
(Air supply pressure
max.: 6 bar) III. (bar) 32 32 31 32 32 31 30 32 32 31 30 30

DN 32 40 50
4 / 2,5 /
Kvs-value (m3/h) 6,3 10 16 6,3 10 16 25 10 16 25 40
Parabolic plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 30 30
2,5 /
Kvs-Wert (m3/h) 4 6,3 10 4 6,3 10 16 6,3 10 16 25
Perforated plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 12 16 22 28 16 22 28 35 22 28 35 43
Travel (mm) 10 15 10 15 10 15
DP30
I. (bar) 40 40 40 40 40 40
80 cm2
4
pressure min. (bar)

(Air supply pressure

III. (bar) 31 30 30 30 30 30
Air supply

max.: 6 bar)
DP32
I. (bar) 40 40 40 40 40 28
250 cm2
4
(Air supply pressure
III. (bar) 40 40 39 40 39 26
max.: 6 bar)

DN 65 80 100
Kvs-value (m3/h) 16 25 40 63 25 40 63 100 40 63 100 160
Parabolic plug
max. diff. pressure 1) (bar) 40 30 30 10 30 30 10 8 30 10 8 3
Kvs-value (m3/h) 10 16 25 40 16 25 40 63 25 40 63 100
Perforated plug
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 28 35 43 56 35 43 56 70 43 56 70 95
Travel (mm) 15 20 15 20 25 15 20 25 30
DP32
I. (bar) 40 40 28 40 28 28
250 cm2
4
(Air supply pressure
Air supply pressure min. (bar)

III. (bar) 40 39 26 39 26 26
max.: 6 bar)
DP33
I. (bar) 40 25 40 25 16 40 25 16 8
400 cm2
4
(Air supply pressure
III. (bar) 40 24 40 24 15 40 24 15 8
max.: 6 bar)
DP34
I. (bar) 40 40 32 40 32 17
800 cm2
4
(Air supply pressure
III. (bar) 40 40 31 40 31 16
max.: 4 bar)

I. Fig. 448: PTFE-V-ring unit / EPDM-sealing

III. Fig. 449: Bellows seal
1) max. differential pressure drop

5
 ARI-STEVI® 448 / 449 (DN15-100)
Closing pressure: pneumatic actuator ARI-DP
Spring opens on air failure
(stem retracting by spring)
max. permissible closing pressures on flow-to-open P2 = 0.
Observe pressure-temperature-limits, refer to page 2.
DN 15 20 25
0,25 / 0,25 / 0,25 /
0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 /
Kvs-value (m3/h) 0,16 / 0,16 / 6,3 0,16 / 6,3 10
Parabolic plug 0,4 1,6 / 1 0,4 1,6 / 1 0,4 1,6 / 1
0,1 0,1 0,1
max. diff. pressure 1) (bar) 40 40 40
2,5 / 2,5 / 2,5 /
Kvs-value (m3/h) -- -- 1,6 / -- -- 1,6 / 4 -- -- 1,6 / 4 6,3
Perforated plug 1 1 1
max. diff. pressure 1) (bar) -- -- 40 -- -- 40 -- -- 40
Seat-Ø (mm) 3 5 12 3 5 12 16 3 5 12 16 22
Travel (mm) 10 10 10
I. (bar) 40 40 33 40 40 33 18 40 40 33 18 8
2
Air supply pressure

DP30 III. (bar) 5 4 3 5 4 3 3 5 4 3 3 2

min. (bar)

80 cm2 I. (bar) 40 40 40 40 40 28
3
(Air supply pressure III. (bar) 19 19 18 19 19 18 17 19 19 18 17 16
max.: 6 bar) I. (bar) 40
4
III. (bar) 33 33 32 33 33 32 31 33 33 32 31 31

DN 32 40 50
4 / 2,5 /
Kvs-value (m3/h) 6,3 10 16 6,3 10 16 25 10 16 25 40
Parabolic plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 30 30
2,5 /
Kvs-value (m3/h) 4 6,3 10 4 6,3 10 16 6,3 10 16 25
Perforated plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 12 16 22 28 16 22 28 35 22 28 35 43
Travel (mm) 10 15 10 15 10 15
I. (bar) 33 18 8 18 8 8
2
DP30 III. (bar) 3 3 2 3 2 2
80 cm2 I. (bar) 40 40 28 40 28 28
Air supply pressure min. (bar)

3
(Air supply pressure III. (bar) 18 17 16 17 16 16
max.: 6 bar) I. (bar) 40 40 40
4
III. (bar) 32 31 31 31 31 31
I. (bar) 40 40 38 23 40 38 23 14 38 23 14 9
2
DP32 III. (bar) 25 25 24 19 25 24 19 11 24 19 11 7
250 cm2 I. (bar) 40 40 40 40 36 40 40 36 23
3
(Air supply pressure III. (bar) 40 40 40 40 33 40 40 33 21
max.: 4 bar) I. (bar) 40 40 38
4
III. (bar) 40 40 36

DN 65 80 100
Kvs-value (m3/h) 16 25 40 63 25 40 63 100 40 63 100 160
Parabolic plug
max. diff. pressure 1) (bar) 40 30 30 10 30 30 10 8 30 10 8 3
Kvs-value (m3/h) 10 16 25 40 16 25 40 63 25 40 63 100
Perforated plug
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 28 35 43 56 35 43 56 70 43 56 70 95
Travel (mm) 15 20 15 20 25 15 20 25 30
I. (bar) 22 14 8 14 8 8
2
III. (bar) 18 11 7 11 7 7
DP32 I. (bar) 40 36 23 36 23 23
3
250 cm2 III. (bar) 40 33 21 33 21 21
(Air supply pressure I. (bar) 40 38 40 38 38
Air supply pressure min. (bar)

4
max.: 6 bar) III. (bar) 40 36 40 36 36
I. (bar) 40 40 40
5
III. (bar) 40 40 40
I. (bar) 40 30 20 11 30 20 11 7 20 11 7 3
2
III. (bar) 40 28 18 10 28 18 10 6 18 10 6 3
DP33 I. (bar) 40 40 26 40 40 26 17 40 26 17 9
3
400 cm2 III. (bar) 40 40 25 40 40 25 16 40 25 16 8
(Air supply pressure I. (bar) 40 40 26 40 26 14
4
max.: 5 bar) III. (bar) 40 40 26 40 26 14
I. (bar) 36 36 19
5
III. (bar) 36 36 19

I. Fig. 448: PTFE-V-ring unit / EPDM-sealing

III. Fig. 449: Bellows seal
1) max. differential pressure drop

6
 ARI-STEVI® 448 / 449 (DN15-100)
Electric actuator ARI-PREMIO-Plus 2G
Control valve in straightway form with electric actuator PREMIO-Plus 2G

Fig. 448 Fig. 449

Actuator data 2,2 - 5 kN 15 kN

A (mm) 171 210
B (mm) 156 184
X (mm) 150 200
Supply voltage: 90-264V AC 47-63Hz, 127-370V DC
Other voltages: 24V AC/DC
Technical data for actuator refer to data sheet PREMIO-Plus 2G

Dimensions and weights

DN 15 20 25 32 40 50 65 80 100

L (mm) 130 150 160 180 200 230 290 310 350

Fig. 448 2,2 kN H (mm) 496 496 511 511 526 533
PN16-40 (kg) 10 11 12 14 16 19
5 kN H (mm) 496 496 511 511 526 533 550 572 588
PN16-40 (kg) 10 11 12 14 16 19 25 32 44
15 kN H (mm) 667 689 705
PN16-40 (kg) 29 36 48

Fig. 449 2,2 kN H (mm) 681 681 689 689 680 682
PN16-40 (kg) 16 17 20 22 29 32
5 kN H (mm) 681 681 689 689 680 682 776 789 805
PN16-40 (kg) 16 17 20 22 29 32 38 49 65
15 kN H (mm) 893 906 922
PN16-40 (kg) 42 53 69

Other dimensions refer to pages 9.

7
 ARI-STEVI® 448 / 449 (DN15-100)
Closing pressure: electric actuator ARI-PREMIO-Plus 2G
max. permissible closing pressures on flow-to-open P2 = 0.
Observe pressure-temperature-limits, refer to page 2.
DN 15 20 25
0,25 / 0,25 / 0,25 /
0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 / 0,63 / 4 / 2,5 /
Kvs-value (m3/h) 0,16 / 0,16 / 6,3 0,16 / 6,3 10
Parabolic plug 0,4 1,6 / 1 0,4 1,6 / 1 0,4 1,6 / 1
0,1 0,1 0,1
max. diff. pressure 1) (bar) 40 40 40
2,5 / 2,5 / 2,5 /
Kvs-value (m3/h) -- -- 1,6 / -- -- 1,6 / 4 -- -- 1,6 / 4 6,3
Perforated plug 1 1 1
max. diff. pressure 1) (bar) -- -- 40 -- -- 40 -- -- 40
Seat-Ø (mm) 3 5 12 3 5 12 16 3 5 12 16 22
Travel (mm) 10 10 10
I. (bar) 40 40 40 40 40 40 40 40 40 40 40 40
Closing pressure
III. (bar) 33 32 31 33 32 31 31 33 32 31 31 30
2,2 kN
Operating time (50 Hz) (s) 40 40 40
Operating speed (mm/s) 0,25 0,25 0,25

DN 32 40 50
4 / 2,5 /
Kvs-value (m3/h) 6,3 10 16 6,3 10 16 25 10 16 25 40
Parabolic plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 30 30
2,5 /
Kvs-value (m3/h) 4 6,3 10 4 6,3 10 16 6,3 10 16 25
Perforated plug 1,6 / 1
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 12 16 22 28 16 22 28 35 22 28 35 43
Travel (mm) 10 15 10 15 10 15
I. (bar) 40 40 40 28 40 40 28 17 40 28 17 11
Closing pressure
III. (bar) 31 31 30 25 31 30 25 14 30 25 14 9
2,2 kN
Operating time (50 Hz) (s) 40 60 40 60 40 60
Operating speed (mm/s) 0,25 0,25 0,25
I. (bar) 40 40 40 40 40 30
Closing pressure
III. (bar) 40 40 40 40 40 28
5 kN
Operating time (50 Hz) (s) 60 60 60
Operating speed (mm/s) 0,25 0,25 0,25

DN 65 80 100
Kvs-value (m3/h) 16 25 40 63 25 40 63 100 40 63 100 160
Parabolic plug
max. diff. pressure 1) (bar) 40 30 30 10 30 30 10 8 30 10 8 3
Kvs-value (m3/h) 10 16 25 40 16 25 40 63 25 40 63 100
Perforated plug
max. diff. pressure 1) (bar) 40 40 40
Seat-Ø (mm) 28 35 43 56 35 43 56 70 43 56 70 95
Travel (mm) 15 20 15 20 25 15 20 25 30
I. (bar) 40 40 29 17 40 29 17 10 29 17 10 5
Closing pressure
III. (bar) 40 40 28 16 40 28 16 10 28 16 10 5
5 kN
Operating time (50 Hz) (s) 39 53 39 53 66 39 53 66 79
Operating speed (mm/s) 0,38 0,38 0,38
I. (bar) 40 40 40 40 36 40 40 36 19
Closing pressure
III. (bar) 40 40 40 40 35 40 40 35 19
15 kN
Operating time (50 Hz) (s) 39 53 39 53 66 39 53 66 79
Operating speed (mm/s) 0,38 0,38 0,38

I. Fig. 448: PTFE-V-ring unit / EPDM-sealing

III. Fig. 449: Bellows seal
1) max. differential pressure drop

8
 ARI-STEVI® 448 / 449 (DN15-100)
Dimensions: Standard design
Control valve in straightway form

Fig. 448 Fig. 449

DN 15 20 25 32 40 50 65 80 100

Dimensions
M Fig. 448 / Fig. 449 (mm) M50 x 1,5
ØZ Fig. 448 / Fig. 449 (mm) 60
ØS Fig. 448 / Fig. 449 (mm) 12 16
Fig. 448 (mm) 93 108 123 130 137 159 175
H1
Fig. 449 (mm) 278 286 277 279 363 376 392
H2 Fig. 448 / Fig. 449 (mm) 65

Face-to-face dimension FTF series 1 acc. to DIN EN 558

L (mm) 130 150 160 180 200 230 290 310 350

Flanges acc. to DIN EN 1092-1/-2  Flange holes / -thickness tolerances acc. to DIN 2533/2544/2545
PN16 (mm) 220
ØD PN25 (mm) 95 105 115 140 150 165 185 200
235
PN40 (mm)
PN16 (mm) 180
ØK PN25 (mm) 65 75 85 100 110 125 145 160
190
PN40 (mm)
PN16 (mm) 4 x 18 8 x 18
n x Ød PN25 (mm) 4 x 14 4 x 18 8 x 18
8 x 18 8 x 22
PN40 (mm)

Weight
Fig. 448 PN16-40 (kg) 4 5 6 8 10 13 19 26 38
Fig. 449 PN16-40 (kg) 10 11 14 16 23 26 32 43 59

max. permissible thrust

Fig. 448 (kN)
5 7,5 15
Fig. 449 (kN)

9
 ARI-STEVI® 448 (DN15-100)
Valve: standard design

I. PTFE-V-ring unit

I. EPDM-sealing

Pos. Sp.p.. Description Fig. 12.448 Fig. 22./23./25.448 Fig. 34./35.448 Fig. 55.448
EN-GJS-400-18U-LT, GX5CrNiMo19-11-2,
1 Body EN-GJL-250 , EN-JL1040 GP240GH+N, 1.0619+N
EN-JS1049 1.4408
X6CrNiMoTi17-12-2,
2 x Seat ring X20Cr13+QT, 1.4021+QT
1.4571
X6CrNiMoTi17-12-2,
3 x Plug X20Cr13+QT, 1.4021+QT
1.4571
4 x Thread pin A4
X6CrNiMoTi17-12-2,
5 x Stem X20Cr13+QT, 1.4021+QT
1.4571
GX5CrNiMo19-11-2,
7 Bonnet GP240GH+N, 1.0619+N
1.4408
X6CrNiMoTi17-12-2,
8 Giude bushing X20Cr13+QT, 1.4021+QT (hardened)
1.4571 (hardened)
9 x Gasket pure graphite (CrNi laminated with graphite)
10 Stud 25CrMo4, 1.7218 A4 - 70
11 Hexagon nuts C35E, 1.1181 A4
12 V-ring unit PTFE / Graphite
14 Washer X5CrNi18-10, 1.4301
refer to Pos. 100

15 Compression spring X10CrNi18-8, 1.4310

Set:

16 Bush PTFE (strengthened)

17 Gasket X6CrNiMoTi17-12-2, 1.4571
18 Scraper PTFE (strengthened)
19 Coupling X8CrNiS18-9, 1.4305
20 Coupling X8CrNiS18-9, 1.4305 / EPDM
30 x Central nut X8CrNiS18-9, 1.4305

Stem sealing Fig. 448

100 x V-ring unit set Set aus: Pos. 12, 14, 15, 16, 17, 18, 19
120 x EPDM-sealing set Set aus: Pos. 17, 20
└ Spare parts

10
 ARI-STEVI® 449 (DN15-100)
Valve: standard design

III. Stainless steel-bellow with pure graphite-packing

III. Stainless steel-bellow with V-ring unit

Pos. Sp.p. Description Fig. 22./23.449 Fig. 34./35.449 Fig. 55.449

1 Body EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N GX5CrNiMo19-11-2, 1.4408
2 x Seat ring X20Cr13+QT, 1.4021+QT X6CrNiMoTi17-12-2, 1.4571
3 x Plug X20Cr13+QT, 1.4021+QT X6CrNiMoTi17-12-2, 1.4571
4 x Thread pin A4
9 x Gasket Pure graphite (CrNi laminated with graphite)
10 Stud 25CrMo4, 1.7218 A4 - 70
11 Hexagon nuts C35E, 1.1181 A4
30 x Central nut X8CrNiS18-9, 1.4305
2001 Bellows housing EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N GX5CrNiMo19-11-2, 1.4408
2002 Bonnet GP240GH+N, 1.0619+N GX5CrNiMo19-11-2, 1.4408
2003 x Stem- / Bellows unit X20Cr13+QT, 1.4021+QT / X6CrNiTi18-10, 1.4541 X6CrNiMoTi17-12-2, 1.4571
X6CrNiMoTi17-12-2, 1.4571
2004 Giude bushing X20Cr13+QT, 1.4021+QT (hardened)
(hardened)
X6CrNiMoTi17-12-2, 1.4571
2005 Giude bushing X20Cr13+QT, 1.4021+QT (hardened)
(hardened)
2006 x Gasket Pure graphite (CrNi laminated with graphite)
2007 Stud 25CrMo4, 1.7218 A4 - 70
2008 Hexagon nuts C35E, 1.1181 A4
2010 Packing ring Pure graphite
Set: refer to
Pos. 2110

2012 Washer X5CrNi18-10, 1.4301

2017 Coupling X8CrNiS18-9, 1.4305
2016 Bush PTFE (strengthened (only for DN15-50))
2018 Compression spring X10CrNi18-8, 1.4310
Set: refer to
Pos. 2100

2021 V-ring unit PTFE / Graphite

2024 Coupling X8CrNiS18-9, 1.4305
2025 Scraper PTFE
2026 Gasket X6CrNiMoTi17-12-2, 1.4571

Stem sealings Fig. 449

2110 x Packing rings set Set of: Pos. 2010, 2012, 2017
2100 x V-ring unit set Set of: Pos. 2012, 2016, 2018, 2021, 2024, 2025, 2026
└ Spare parts

11