PO BOX 4394
SANTA ROSA, CA
95402 USA
P (707) 525-9941
F (707) 575-7046
INSTALLATION INFORMATION
EMGPICKUPS.COM EMG MODELS: PASSIVE / PASSIVE
OUTPUT
Diagram S
2 EMG Passive Pickups
Master Volume and Master Tone
3-Position Tele switch (B162) T
NECK PICKUP
MASTER MASTER
VOLUME TONE
B124rH
250K 500K VOLUME
TONE
BRIDGE PICKUP
STRING GROUND WIRE
COMING FROM BRIDGE
Attaching the bridge ground wire
It is common to “ground” (earth) the strings on guitars that have
passive pickups. Included with the system is a black wire with a single
CLOSED CRIMP
black connector attached. Also included is an IDC connector for
connecting the two wires together. Insert the bridge ground wire,
and the connector wire into the IDC connector, crimp the connector
with a pair of pliers until it snaps and this will connect the two wires.
You don’t need to strip the insulation from the wires. Push the black
connector onto a free ground terminal (GND) of the volume control
as shown in the diagram. This will ground the strings to the system.
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2021 Copyright EMG INC. All Rights Reserved.
