595-110-E

2015-04-20

Spare Parts List

Seldén in-mast furling and reefing system

Type: RA MK III
RB MK III
RC MK III
2

General information
Identification of in-mast furling mast model
As a result of continued product development. some parts have been replaced and improved over the years.
To help identify which version (Mk No.) you have, the physical features are listed in the table below.

If you recived this spare parts lists with a new mast, then you have the Mk III-version. Please disregard other
models.

Spare parts lists can be obtained from Seldén.

In contacts with Seldén the production number, engraved in the section close to the heel, can also be used for
identifcation.

Parts Mk I Mk II Mk III
RA • Luff extrusion • Not tensioned • Tensioned. • Tensioned.
Adjustment screw locked Adjustment screw locked
by a Ø 29 mm Al. Al tube by a Ø 29 mm Al. Al tube
• Furling gear • Front cover hides centre of black • Front cover hides centre of • Black/silver linedriver fully
linedriver. Ratio 1:1 black linedriver. Ratio 1:1 exposed Ratio 1:1.75

RB • Luff extrusion • Luff groove Ø 10 2 flat surfaces • Luff groove Ø 10 • Luff groove Ø 8.
Adjustment screw locked 2 flat surfaces Adjustment screw 1 flat surface
by square locking tube locked by a Ø 35 mm Al. Al. Adjustment screw locked
tube. by a Ø 35 mm Al. Al. tube.
• Tack attachment • Swinging tack attachment • Fixed tack hook. • Fixed tack hook.
• Sail entry • Slotted tube • Milled in luff extrusion • Open groove. No milling
• Furling gear • Silver linedriver. • Silver linedriver. • Black/Silver linedriver.
Ratio 1:1.5 Ratio 1:1.5 Ratio 1:2
• Boom bracket • Boom bracket incorporated in • Boom bracket separate • Boom bracket separate
furling gear. from furling gear. from furling gear.
RC • Luff extrusion • Adjustment screw locked • Adjustment screw locked • Adjustment screw locked
by square locking tube (St.st) by a Ø 45 mm Al. Al. tube. by a Ø 45 mm Al. Al. tube.
• Tack attachment • Swinging tack attachment • Fixed tack hook. • Fixed tack hook.
• Sail entry • Slotted tube • Milled in luff extrusion • Milled in luffextrusion
• Furling gear • Silver linedriver. • Silver linedriver. • Black/Silver linedriver.
Ratio 1:1.5 Ratio 1:1.5 Ratio 1:2
• Boom bracket • Boom bracket incorpora- • Boom bracket separate • Boom bracket separate
ted in furling gear. from furling gear. from furling gear.

Note: Early masts of the smaller RA size were made by Kemp Masts Ltd, using different driving methods.
Theses were called ’’Reefin’’. For spares & assistance, contact Seldén Masts Ltd in England.

If the halyard swivel or furling gear are dismantled. they can be difficult to re-assemble as the
balls are loose in the bearing races. Use grease as temporary adhesive during assembly. For
service assistance, contact your Seldén dealer.

You will find Seldén & Furlex dealers list in the Furlex spare parts list or on www.seldenmast.com.

Seldén Mast AB reserves the right to alter the design or specification without prior warning; to allow
unrestricted future product development.
 3

Contents
Page
General information 2
Halyard swivel 4
Furling gear 6
Top swivel 10
Tack assembly 12
Sail feeder assembly 16
Luff extrusion 16
Swinging lead 18
Additional items 20
4

Halyard swivel Description A

Type RA Mk III Type RB Mk IIl Type RC Mk IIl
Mast extrusion Mast extrusion Mast extrusion
R190/94 F176 R232/126 F212 R290/150 F265
R213/104 F194 R260/150 F228 F286
R235/116 F212 F246 F305
F228 F265 F324
F286
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number 540-080-01 Assembly number 540-158-01 Assembly number 540-253-01
A1 Hub Ø 60x100 1 540-081 Ø 52x120 1 539-581 Ø 62x130 1 539-281
Ball bearing
A2 Ø 57x7 2 539-309 - - - - - -
ring - inner
A3 Sliding sleeve - - - Ø 64x140 1 540-159 Ø 80x150 1 540-254
A4 Ball Ø6 54 539-034 Ø6 60 539-034 Ø8 54 539-128
Ball bearing
A5 Ø 62x11.5 2 539-310 Ø 68/52-16 2 539-272 Ø 83/64-16 2 539-270
ring - outer
A6 Eye ring Ø 63x90 1 540-080 Ø 77x140 1 540-158 Ø 92x155 1 540-253
A7 Split pin Ø 2.9x32 1 301-525 Ø 2.9x32 1 301-525 Ø 2.9x32 1 301-525
A8 Shackle Ø 6x13x25 1 307-061 Ø 6x13x25 1 307-023 Ø 8x16x32 1 307-025
A9 Pin Ø 8x50 1 166-232 Ø 10x37 1 166-222 Ø 12x42 1 166-223
A10 Sliding insert port - - - 52x52 1 540-166 52x52 1 540-166
A11 Sliding insert STB - - - 52x52 1 540-165 52x52 1 540-165
A12 Collar Ø 57x8 1 540-082 - - - - - -
A13 Selft. screw RTS 4.2x19 1 171-040 3.5x9.5 1 171-047 3.5x9.5 1 171-047
A14 Washer - - - Ø 62/52-3 1 164-441 Ø 74/62-3 1 164-440
A15 Spirolox ring - - - 1 301-508 1 301-507
 5

Type RA MK III
A1

A2

A4

A5

A7
A8

Type RB/RC MK III

A3
A9

A1

A4

A6
A5
A5

A4 A7

A2 A10

A13 A8

A12

A13

A9

A6

A5
A11
A4

A14

A15
6

Furling gear Description B

Type RA Mk III Type RB Mk IIl Type RC Mk IIl
Mast extrusion Mast extrusion Mast extrusion
R190/94 F176 R232/126 F212 R290/150 F265
R213/104 F194 R260/150 F228 F286
R235/116 F212 F246 F305
F228 F265 F324
F286
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number 540-047-01 Assembly number 540-142-01 Assembly number 540-142-01
Furling gear
B1 210x110 1 540-047 424x132 1 540-142 424x132 1 540-142
bracket
Label - Furling
B2 - - - 73x43 1 591-268 73x43 1 591-268
direction
Line driver half -
B3 Ø 100/36-14 1 540-048 Ø 120/36 1 540-153 Ø 120/36 1 540-153
outer
Line driver half -
B4 Ø 100/35-25 1 540-049 Ø 120/36 1 540-152 Ø 120/36 1 540-152
inner
B5 Pawl Ø 8x16 4 540-007 Ø 8x16 4 540-007 Ø 8x16 4 540-007
B6 Spring Ø 7/0.5 4 540-008 Ø 7/0.5 4 540-008 Ø 7/0.5 4 540-008
B7 Hub assembly Ø 80/22-48 1 540-143-01 Ø 80/22-48 1 540-143-01 Ø 80/22-48 1 540-143-01
B8 Needle roller Ø 5x25 15 166-212 Ø 5x25 15 166-212 Ø 5x25 15 166-212
B9 Locking nut M6 4 158-005 M6 4 158-005 M6 4 158-005
B10 Shaft Ø 20/75-120 1 540-053 Ø 20/75-120 1 540-053 Ø 20/75-120 1 540-053
B11 Screw MFT 6x20 6 162-031 MFT 6x20 6 162-031 MFT 6x20 6 162-031
B12 Bevel gear Ø 59/20-33 1 320-010 2) Ø 84/20-40 1 320-011 3) Ø 84/20-40 1 320-011 3)

B13 Spring pin Ø 8x45 1 166-503 Ø 8x45 1 166-503 Ø 8x45 2 166-503

B14 Ball Ø6 13 539-034 Ø6 13 539-034 Ø6 13 539-034
Ball bearing
B15 Ø 36x7 1 539-060 Ø 36x7 1 539-060 Ø 36x7 1 539-060
ring - outer
B16 Ratchet controller Ø 100x3 1 540-054 Ø 100x3 1 540-054 Ø 100x3 1 540-054
B17 Line stripper 58x20 1 540-034 58x20 1 540-034 58x20 1 540-034
B18 Screw MRT 6x20 4 155-621 MRT 6x20 4 155-621 MRT 6x20 4 155-621
B19 Bevel gear Ø 44/20-26 1 320-009 4) Ø 54/20-41.5 1 320-012 5) Ø 54/20-41.5 1 320-012 5)

B20 Shaft Ø 20x140 1 540-011 Ø 20x220 1 166-143 Ø 20x220 1 166-143

B21 Washer Ø 36/20-3 1 164-421 Ø 36/20-3 1 164-421 Ø 36/20-3 1 164-421
B22 Protection cover Ø 57/18-20 1 540-126 Ø 57/18-20 1 540-126 Ø 57/18-20 1 540-126
B23 Hose Ø 24/19-26 1 540-027 - - - - - -
Ball bearing
B24 - - - Ø 38x8 2 540-106 Ø 38x8 2 540-106
ring - inner
B25 Ball Ø6 26 539-034 Ø8 24 539-128 Ø8 24 539-128
Ball bearing
B26 Ø 36x7 2 539-060 Ø 44x8 2 539-223 Ø 44x8 2 539-223
ring - outer
B27 Cover 63.5x39 1 540-055 74x21 1 540-155 74x21 1 540-155
B28 Backing plate 64x12 1 540-056 77x10 1 540-156 77x10 1 540-156
B29 Spring pin Ø 6x40 2 166-528 Ø 6x40 1 166-528 Ø 6x40 1 166-528
B30 Screw MFT 5x12 1 162-048 MFT 5x12 1 162-048 MFT 5x12 1 162-048
B31 Lock washer - - - M5 1 164-051 M5 1 164-051

To be continued on page 8
 7

B23

B22

B29

B41
B20
B40

B43

B21
B1
B30 B42
B24
B2
B27 B25
B26

B28 B45
B16 B32 B31

B44
B4 B5
B3
B10

B6
B19

B13

B33

B14
B18
B7 B15
B11
B8

B9 B17

B26 B33
B25

B24

B13
B12
8

Furling gear (Continued from page 6. ) Description B

Type RA Mk III Type RB Mk IIl Type RC Mk IIl
Mast extrusion Mast extrusion Mast extrusion
R190/94 F176 R232/126 F212 R290/150 F265
R213/104 F194 R260/150 F228 F286
R235/116 F212 F246 F305
F228 F265 F324
F286
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number 540-047-01 Assembly number 540-142-01 Assembly number 540-142-01
B32 Washer - - - Ø 13/6-1.5 1 164-001 Ø 13/6-1.5 1 164-001
B33 Washer - - - Ø 37/21-0-5 3 1) 164-439 Ø 37/21-0-5 3 1) 164-439

B40 Backing plate 62x30 2 540-014 70x74 2 540-103 70x74 2 540-103

B41 Locking nut M6 4 158-005 M8 8 158-006 M8 8 158-006
B42 Screw MFT 6x40 4 162-024 MFT 8x40 8 162-037 MFT 8x40 8 162-037
B43 Pop rivet AD625 Ø 4.8x25.4 2 167-008 Ø 4.8x25.4 4 167-008 Ø 4.8x25.4 4 167-008
Supporting
B44 - - - - - - 70x30x15 1 540-125
bracket
B45 Screw - - - - - - MFT 8x25 2 162-050

1) Washers (164-439) are only intended as spacers to fill out possible excessive play. Correct quantities cannot therefore be specified.
Washers may not be needed at all.
2) Only as an assembly B12-B13 1 320-010-01 - - - - - -
3) Only as an assembly B12-B13 - - - 1 320-011-01 - 1 320-011-01
4) Only as an assembly B19 & B13 1 320-009-01 - - - - - -
5) Only as an assembly B19 & B13 - - - 1 320-012-01 - 1 320-012-01
 9

B23

B22

B29

B41
B20
B40

B43

B21
B1
B30 B42
B24
B2
B27 B25
B26

B28 B45
B16 B32 B31

B44
B4 B5
B3
B10

B6
B19

B13

B33

B14
B18
B7 B15
B11
B8

B9 B17

B26 B33
B25

B24

B13
B12
10

Top swivel Description C

Type RA Mk 4 Type RB Mk 4 Type RC Mk IIl
Mast extrusion Mast extrusion Mast extrusion
R190/94 F176 R232/126 F212 R290/150 F265
R213/104 F194 R260/150 F228 F286
R235/116 F212 F246 F305
F228 F265 F324
F286
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number 540-075-01 Assembly number 540-164-01 Assembly number 540-204-01
Ball bearing
C1 Ø 23/20-370 2 540-075 Ø 55X91 2 540-164 Ø 66x105 2 540-204
house half
C2 Screw MRT 5x16 2 155-807 MRT 5x16 2 155-807 MRT 6x20 2 155-621
C3 Locking nut M5 2 158-004 M5 2 158-004 M6 2 158-005
Ball bearing
C4 Ø 44x8 1 539-223 Ø 44x8 1 539-223 Ø 52x8 1 539-111
ring - outer
C5 Balls Ø8 12 539-128 Ø8 12 539-128 Ø8 15 539-128
C6 Ball bearing eye Ø 37x52.5 1 540-160 Ø 37x52.5 1 540-160 Ø 44/22-75 1 540-205

C7 Pop rivet LD639 Ø 4.8x9.9 4 167-007 - - - - - -

C7 Pop rivet LD665 - - - Ø 4.8x16.5 4 167-006 - - -
C7 Pop rivet LD870 - - - - - - Ø 6.4x17.8 6 167-002
C8 Screw - - - - - - M6S 10x70 1 151-070
C9 Locking nut - - - - - - M10 1 158-007
C10 Washer - - - - - - Ø 16/8-1.5 2 164-401
C11 Bush - - - - - - Ø 14/10-29.6 1 306-515
C12 Screw - - - - - - M6S 8x90 1 151-049
C13 Locking nut - - - - - - M8 1 158-006
C14 Strap - - - - - - 12x25x60 2 507-891
 11

Type RA/RB MK 4

C2 C6

C4

C3

C5

C1

Type RC MK III
C9 C4
C13 C10
C2
C3

C5

C11
C14

C10

C1
C12

C6

C8

C7
12

Tack assembly Description D

Type RA Mk III
Mast extrusion
190/94
213/104
235/116
Item Description Dimension Qty Part no
540-710-11
Assembly number
540-710-12 1)

D1 Tack tube Ø 24.5-291 1 540-710

D2 Insulator Ø 26.5-40 1 540-071
D3 Tack hook Ø 26.5/32-38 1 536-252
D4 Pop rivet LD639 Ø 4.8x9.9 2 167-007
D5 Wheel Ø 70/26-20 1 319-599
D6 Split pin Ø 3.7x33 1 301-045
Ø 20/15.6-50 540-030
D7 Reinforcement plug 1
Ø 20/15.6-240 1) 540-037 1)

D8 Pop rivet LD639 Ø 4.8x9.9 1 167-007

D9 Tensioning screw M10/Ø 20-132 1 540-040
D10 Screw MCS 6x16 1 155-015
D11 Pop rivet LD639 Ø 4.8x9.9 3 167-007
D12 Locking tube Ø 29-250 1 540-067
D13 Label 40x20 1 591-191
Sealing plug Ø 4.8 rivet 1 319-510

Ø 30/26-65-65 540-065
D20 Adapter 1
Ø 30/26-65-45 2) 540-012 2)

D21 Clevis pin Ø 6x36 1 165-007

D22 Split pin Ø 2.3x12 1 301-047
D23 Clevis pin Ø 6x36 1 165-007
D24 Split pin Ø 2.3x12 1 301-047

1) Type RA heavy duty version

2) Type RA short version (Before 1996)

Type RA Mk III Mast extrusion 232/126 260/150

Boom extrusion Mast extrusion
143/76 200/117
171/94 250/140
Item Description Dimension Qty Part no Dimension Qty Part no
Assembly number 540-136-01 Assembly number 540-137-01
D1 Tack tube 30/29-346 1 540-136 30/29-442 1 540-137
D2 Insulator - - - - - -
D3 Tack hook Ø 38-42 1 536-251 Ø 38-42 1 536-251
D4 Pop Rivet LD 850 Ø 6.4x12.7 2 167-004 Ø 6.4x12.7 2 167-004
D5 Wheel Ø 80/31.5-20 1 319-600 Ø 80/31.5-20 1 319-600
D6 Split pin Ø 3.7x33 1 301-045 Ø 3.7x33 1 301-045
D7 Reinforcement plug 23/20-60 1 540-139 23/20-60 1 540-139

To be continued on page 14
 13

D12

D42
D13

D42
D30

D9 D10 D40

D11

D42

D3

D4
D2

D5
D42

D1
D6 D32

D41
D8 D31
D21

D7

D20
D23

D24

D22
14

Tack assembly (Continued from page 12.) Description D

Type RB Mk III Mast extrusion 232/126 260/150
Boom extrusion Boom extrusion
143/76 200/117
171/94 250/140
Item Description Dimension Qty Part no Dimension Qty Part no
Assembly number 540-136-01 Assembly number 540-137-01
D8 Pop rivet LD639 Ø 4.8x9.9 1 167-007 Ø 4.8x9.9 1 167-007
D9 Tensioning screw M12/Ø 25-120 1 540-132 M12/25-120 1 540-132
D10 Screw MCS 6x22 1 155-034 MCS 6x22 1 155-034
D11 Pop rivet LD639 Ø 4.8x9.9 4 167-007 Ø 4.8x9.9 4 167-007
D12 Locking tube Ø 35x200 1 540-134 Ø 35x200 1 540-134
D13 Label 40x20 1 591-191 40x20 1 591-191
D20 Adapter Ø 38x65 1 540-135 Ø 38x65 1 540-135
D21 Clevis pin Ø 10x40 1 165-211 Ø 10x40 1 165-211
D22 Split pin Ø 2.3x16 1 301-048 Ø 2.3x16 1 301-048
D23 Clevis pin Ø 12x25 1 165-401 Ø 12x25 1 165-401
D24 Split pin Ø 2.9x16 1 301-049 Ø 2.9x16 1 301-049
- Sealing plug Ø 4.8 rivet 1 319-510 Ø 4.8 rivet 1 319-510

Type RC Mk III Mast extrusion 290/150

Boom extrusion Boom extrusion
143/76 200/117
171/94 250/140
Item Description Dimension Qty Part no Dimension Qty Part no
Assembly number 540-229-01 Assembly number 540-230-01
D1 Tack tube 38/38-381 1 540-229 38/38-477 1 540-230
D2 Insulator Ø 40x60 1 540-231 Ø 40x60 1 540-231
D3 Tack hook Ø 45-95 1 540-224 Ø 45-95 1 540-224
D4 Pop rivet LD639 Ø 4.8x9.9 4 167-007 Ø 4.8x9.9 4 167-007
D5 heel Ø 90/40-30 1 319-601 Ø 90/40-30 1 319-601
D6 Split pin Ø 3.7x50 1 301-010 Ø 3.7x50 1 301-010
D7 Reinforcement plug 35/25-60 1 540-232 35/25-60 1 540-232
D8 Pop rivet LD639 Ø 4.8x9.9 1 167-007 Ø 4.8x9.9 1 167-007
D9 Tensioning screw M16/Ø 32-177 1 540-225 M16/Ø 32-177 1 540-225
D10 Screw MCS 6x22 1 155-034 MCS 6x22 1 155-034
D11 Pop rivet LD850 Ø 6.4x12.7 6 167-004 Ø 6.4x12.7 6 167-004
D12 Locking tube Ø 44x300 1 540-227 Ø 44x300 1 540-227
D13 Label 40x20 1 591-191 40x20 1 591-191
D20 Adapter Ø 44x78 1 540-228 Ø 44x78 1 540-228
D21 Clevis pin Ø 12x53 1 165-403 Ø 12x53 1 165-403
D22 Split pin Ø 2.9x16 1 301-049 Ø 2.9x16 1 301-049
D23 Clevis pin Ø 12x25 1 165-401 Ø 12x25 1 165-401
D24 Split pin Ø 2.9x16 1 301-049 Ø 2.9x16 1 301-049
- Sealing plug Ø 4.8 rivet 1 319-510 Ø 4.8 rivet 1 319-510
 15

D12

D42
D13

D42
D30

D9 D10 D40

D11

D42

D3

D4
D2

D5
D42

D1
D6 D32

D41
D8 D31
D21

D7

D20
D23

D24

D22
16

Sail feeder assembly Description D

Type RA Mk III
Type RB Mk IIl
Mast extrusion Type RC Mk IIl
Mast extrusion
190/94 Mast extrusion
232/126
213/104 290/150
260/150
235/116
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
540-711-11
Assembly number Assembly number 540-154-01 Assembly number 540-233-01
540-711-12 1)
Sailfeeder Ø 25.5-380 540-711
D30 1 Ø 30/29-390 1 540-154 Ø 38/38-330 1 540-233
extrusion Ø 25.5-2000 540-073 1) 2)
Tensioning
D31 M10/Ø 20-113 1 540-041 M12/Ø 25-101 1 540-133 M16/Ø 34-162 1 540-226
screw body
D32 Pop rivet LD639 Ø 4.8x9.9 3 167-007 Ø 4.8x9.9 4 167-007 - - -
D32 Pop rivet LD850 - - - - - - Ø 6.4x12.7 6 167-004
D41 Joint sleeve - - - - - - 33/25-200 1 540-215
D42 Pop rivet LD639 - - - - - - Ø 4.8x9.9 8 167-007
- Sealing plug - - - - - - Ø 4.8 rivet 8 319-510
- Pop rivet LD639 Ø 4.8x9.9 1 167-007 1) - - - - - -
Reinforcement
- Ø 20/15.6-1600 1 540-072 1) - - - - - -
sleeve

1) Type RA heavy duty version

2) Luff extrusion cover (535-751) included

Luff extrusion
Type RA Mk III
Type RB Mk IIl
Mast extrusion Type RC Mk IIl
Mast extrusion
190/94 Mast extrusion
232/126
213/104 290/150
260/150
235/116
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number - Assembly number - Assembly number -
Luff extrusion 2
D40 Ø 24.5-6500 2 540-035-011) Ø 30/29-7700 540-111-01 Ø 38/38-7700 3 540-217-01
assembly 3 2)
1
D41 Joint sleeve Ø 20/15-100 2 540-043 Ø 23/20-180 540-148 Ø 33/25-200 2 540-215
2 2)
17
D42 Pop rivet LD639 Ø 4.8x9.9 9 167-007 Ø 4.8x9.9 167-007 Ø 4.8x9.9 41 167-007
25 2)
17
- Sealing plug Ø 4.8 rivets 9 319-510 Ø 4.8 rivet 319-510 Ø 4.8 rivet 41 319-510
25 2)

1) Luff extrusion cover included (RA: 540-036; RB: 540-112; RC: 540-218)
2) Boom extrusions 200/117 & 250/140
 17

D12

D42
D13

D42
D30

D9 D10 D40

D11

D42

D3

D4
D2

D5
D42

D1
D6 D32

D41
D8 D31
D21

D7

D20
D23

D24

D22
18

Swinging lead Description E

Type RA Mk III Type RB Mk IIl
Mast extrusion Mast extrusion 3)
Mast extrusion
190/94 232/126
235/116
213/104 290/150
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number 508-154-01 Assembly number 508-160-01 Assembly number 508-157-01
Sheave house
E1 150x94X63 1 508-154 150x120 1 508-160 150x120 508-157
bracket
Swinging sheave
E2 2xØ 45x13 2 505-034 2xØ 70x16 2 505-039 2xØ 70x16 505-039
house
E3 Screw M6S 8x30 2 151-043 M6S 8x30 2 151-043 M6S 8x30 151-043
E4 Washer-serrated Ø 15/8.4-2.4 2 164-427 Ø 15/8.4-2.4 2 164-427 Ø 15/8.4-2.4 164-427
E5 Washer Ø 16/8-1.5 2 164-401 Ø 16/8-1.5 2 164-401 - - -
E6 Locking nut M8 2 158-006 M8 2 158-006 M8 158-006
E7 Sheave Ø 45/8-13 4 504-320 Ø 70/12-16 4 504-332 Ø 70/12-16 504-332
E8 Clevis pin Ø 8x50 2 165-108 Ø 12x53 2 165-403 Ø 12x53 165-403
E9 Split pin - - Ø 2.9x18 2 301-050 Ø 2.9x18 301-050
- Split ring 1) Ø 20x1.5 2 301-015 - - - - - -
E11 Separator - - - 72x59 2 537-034 72x59 537-034
Pop rivet
- Ø 6.4x17.8 8 167-002 Ø 6.4x17.8 (long) 6 167-025 - - -
LD 870 2)
E13 Backing plate - - - - - - 70x74 540-103
E14 Locking nut - - - - - - M8 158-006
E15 Screw - - - - - - MFT 8x40 162-037
E16 Pop rivet LD665 - - - - - - Ø 4.8x16.5 167-006

1) Split ring (not shown) replacing split pin (E9) in assembly 508-154-01
2) Pop rivets (not shown) replacing fastening components (E13 - E16) in assemblies 508-154-01 & 508-160-01
3) Swinging lead cannot be fitted to mast extrusion 290/150
 19

E1
E13

E14

E15

E7

E11

E8 E9

E4
E2

E6
E3

E5 E16
20

Additional items Description F

Type RA Mk III
Type RB Mk IIl
Mast extrusion Type RC Mk IIl
Mast extrusion
190/94 Mast extrusion
232/126
213/104 290/150
260/150
235/116
Item Description Dimension Qty Part no Dimension Qty Part no Dimension Qty Part no
Assembly number - Assembly number - Assembly number -
F1 Cover 57x126 2 540-026 72x207 2 540-120 72x207 2 540-120
F2 Sail slot cover - - - 38x20 1 1) 535-634 38x20 1 1) 535-634
Grease hole
F3 Ø 44 2 319-609 Ø 44 2 319-609 Ø 44 2 319-609
cover
Lubricating
F4 100g 1 312-501 100g 2 312-501 100g 1 312-501
grease
Manual
F5 A4 1 595-059-S 2) A4 1 595-063-S A4 1 595-063-S
(Swedish)
F5 Manual (English) A4 1 595-059-E 2) A4 1 595-063-E A4 1 595-063-E
Manual
F5 A4 1 595-059-T 2) A4 1 595-063-T A4 1 595-063-T
(German)
Manual addition
F6 A4 1 595-087-S - - - - - -
(Swedish)
Manual addition
F6 A4 1 595-087-E - - - - - -
(English)
Manual addition
F6 A4 1 595-087-T - - - - - -
(German)
F7 Spare parts list A4 1 595-110-E A4 1 595-110-E A4 1 595-110-E
Internal 530-905 6)
F8 - - - T=30 1 T=30 1
separator 530-907 6)

F9 Rope clutch 6 - 12 mm 1 511-134 6 - 12 mm 1 511-134 6 - 12 mm 1 511-134

F10 Deck organizer 5) 3 sheaves 1 538-809-01 3 sheaves 1 538-809-01 3 sheaves 1 538-809-01
F10 Deck organizer 5) 4 sheaves 1 538-810-01 4 sheaves 1 538-810-01 4 sheaves 1 538-810-01
F11 Endless line 2x5000 1 611-011-05 2x7000 1 611-011-06 2x9000 1 611-011-07
Outhaul lead
F12 R345 538-992-01 R345 1 538-992-01 - - -
block 3) 4)
Outhaul lead
F12 R545 11 538-993-01 R545 1 538-993-01 R545 1 538-993-01
block 3) 4)
Outhaul lead
F12 - - - - - - R645 1 538-994-01
block 3) 4)
F13 U-lead 4) ”small” 1 508-124-01 ”small” 1 508-124-01 ”small” 1 508-124-01

1) Variable length. Length to be specified when ordered.

2) Manual must be accompanied by manual addition (595-087-S/E/T)
3) Size of lead block depends on boom size; 120/62 & 143/76: R345; 171/94: R545; 200/117 & 250/140: R645
4) U-lead can be used instead of lead block and vice versa.
5) Removable sheaves for endless line.
6) 232/126: 530-905; 260/150: 530-907
 21

F1
F4

F12

F11
F9
F3

F8 F5
F13
F6

F6

F10 F2
22

Notes/Comments
 23

Notes/Comments
DINGHIESKEELBOATSYACHTS

Seldén Mast AB, Sweden The Seldén Group is the world’s leading manu­
Tel +46 (0)31 69 69 00
Fax +46 (0)31 29 71 37 facturer of masts and rigging systems in carbon
e-mail [email protected]
and aluminium for dinghies, keelboats and yachts.
Seldén Mast Limited, UK
Tel +44 (0) 1329 504000 The Group consists of Seldén Mast AB in Sweden,
Fax +44 (0) 1329 504049
e-mail [email protected] Seldén Mast A/S in Denmark, Seldén Mast Ltd in
the UK, Seldén Mid Europe B.V. in the Nether­
Seldén Mast Inc., USA
Tel +1 843-760-6278
Fax +1 843-760-1220
lands, Seldén Mast SAS in France and Seldén
e-mail [email protected]
Mast Inc in the USA. Our well known brands
Seldén Mast A/S, DK are Seldén and Furlex. The worldwide success
Tel +45 39 18 44 00
Fax +45 39 27 17 00 of Furlex has enabled us to build a network of

SELDÉN and FURLEX are registered trademarks of Seldén Mast AB

e-mail [email protected]
over 750 authorised dealers covering the world’s
Seldén Mid Europe B.V., NL
Tel +31 (0) 111-698 120 marine markets. So wherever you sail, you can be
Fax +31 (0) 111-698 130
e-mail [email protected] sure of fast access to our service, spare parts and
know-how.
Seldén Mast SAS, FR
Tel +33 (0) 251 362 110
Fax +33 (0) 251 362 185
e-mail [email protected]

www.seldenmast.com

Dealer:
Printed in Sweden
595-110-E