MAGNETIC SEPARATORS

MAGNETIC TOOLS & EQUIPMENT

FOR WELDING OPERATION
MAGNET
LIFTING
MAGBORE*
Nonferrous metal
separatorr

CONVEYANCE EQUIPMENT
MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE
DEMAGNETIZER EQUIPMENT
Combustible
wastes
Aluminum cans and
nonferrous pieces
(aluminum and copper)

Compliance with the Energy Conservation Act in Japan

In compliance with the Revised Energy Conservation Act in Japan, all of the motors
■Types of magnetic separators of 0.75 kW or over employed in KANETEC products are IE3 premium motors.

SEPARATORS FOR CONVEYANCE

Type Product Name Model Features
Eccentric pole Nonferrous metal separator BMR Assists recycling by separating and collecting shredded dust.
Aluminum separation Conveyor type aluminum separator MES Assists recycling by separating crushed wastes and hand-sorted wastes.

MEASURING POWERFUL MAGNETIC MAGNETIC

Suspended electromagnetic eparator BST Natural discharge type and continuous operation.
Suspended permanent magnetic separator SPM Energy saving and auto discharge type for shallow conveyors.
Round electromagnet for iron removal HEM-C Natural air cooling and enclosed type for less mixture of iron pieces.
Suspension
Suspended electromagnet for iron removal HEM-BS Oil cooled. Suitable for a small amount of mixed iron pieces.
KPMD Larger attractive force than KPMF.

SEPARATORS
Suspended plate magnet
KPMJ Powerful type having larger attractive force than KPMD.
KPMF Chute-mounted type with stainless steel surface.
Plate Plate magnet
KPMT Chute-mounted type. Attracted iron pieces held firmly.
Tubular Tubular separator CPM Removal of iron pieces during transfer of bulk materials in a pipe.
Magnetic bar KGM Round, Capable of being incorporated in any place. MATERIALS INSTRUMENTS TOOLS
rectangular
Small
Grid type magnet KGM/KGM-C Collection of small iron pieces mixed in small amount. Installed at hopper outlet or in duct.
MAGNETIC MEASURING

Electromagnetic pulley KER Usable as a conveyor head pulley. For large diameter pulleys, an electromagnetic type is more effective.
Pulley
Permanent magnetic pulley KPR Usable as a conveyor head pulley. High iron removal rate.
Barrel separator KBS Barrel polishing.
Drum separator KDS Casing provided for easy installation.
Drum
Large permanent magnetic drum KPDL Works well for large iron pieces and a large amount of iron pieces to collect.
Permanent magnetic drum KPD Most suitable for removing iron from granular materials and can be incorporated in equipment.
Induction type high magnetic force separator KID-R Removal of weak magnetic granular materials. 2.6 T (26 kg) max.
High magnetic Cross belt type high magnetic force separator KID-B For small capacity. Less mixture of raw materials in removed iron.
force
electromagnetic Induction type separator KID Suitable for removing iron from casting sand.
Electromagnetic filter KIF Suitable for removing iron from fine materials (powder).
High-speed drum High-speed drum separator KHDS High grade sorting and collection of magnetic substances.

128
 MAGNETIC SEPARATORS
■Examples of application of magnetic
separators in various fields
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

Removal of iron from various kinds of raw materials and semi-finished products
and collection of iron powder are called magnetic separation. KANETEC offers
a wide variety of magnetic separators for use with lump materials, granular
materials, clay-like materials and liquids.

Examples of usage in various fields

MAGNET
LIFTING

Steel making and mining Separation of steel materials and collection of iron in residues.
Machine, press, plant Processing of scraps and collection of flux.
Food, candy, can making Removal of iron from raw materials and foreign matter in manufacturing processes.
Pulp, paper, stone crushing Removal of iron from raw materials and protection of crushers.
Chemicals Removal of iron from raw materials and waste liquid.
Casting and nonferrous Removal of iron from casting sand and chips.
MAGBORE*

Sand and cement

Feed and fertilizer Removal of iron from raw materials and mixed machined parts.
Textile and fabric
Sugar, salt and cigarettes Removal of iron from raw materials.
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

Selection of magnetic separators and notes for inquiry

A magnetic separator to select must be suitable for the purpose of use and
have a sufficient capacity. To select such a most suitable separator, when
inquiring about separators, conditions such as the purpose of use and
properties of materials need to be informed, as detailed below: Tests of separating samples available.
●Purpose (improving the grade, collecting useful magnetic substances, etc.)
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

Please contact your nearest KANETEC sales office. Then we

●Kind, composition and components of raw materials
will do separation tests and model selection for you.
●Grain size of raw materials (□□ mm ‒ □□ mm, □□ mesh ‒ □□ mesh)
●Water content, raw material temperature
●Apparent specific gravity (bulk density)
●Kind, shape and grain size of mixed magnetic substances ※ Please use the Facsimile Communication Form
DEMAGNETIZER FOR CONVEYANCE

●Amount of raw materials to process per hour (kg/h, m3/h)

(Selection Data) on page 174 and page 175 to
●Amount and ratio of mixed magnetic substances
select the best separator.
●Other special conditions

Separation on conveyor (dry) Separation by magnetic drum (dry) Separation by suspended separator (dry)
●A magnetic pulley is used. ●A magnetic drum is installed at the bottom of the hopper chute. To automatically remove iron pieces, bolts and nuts on a conveyor,
●A magnet is suspended over the conveyor. ●A magnetic drum is installed at the exit of a vibrator feeder. a suspended magnetic separator is installed to attract and remove
●A plate magnet is installed on the discharge side of a conveyor. ●A magnetic drum is installed on the discharge side of a iron pieces.
●A grid type magnet is installed on the discharge side of a conveyor. For fully automatic removal and discharge:
conveyor. ●A magnetic drum is installed at the raw material exit. BST, SPM, etc.
●A comb type magnet is installed on the conveyor. For automatic removal and manual discharge:
Magnet HEM-BS, HEM-C, KPMJ, KPMD, etc.
SEPARATORS SEPARATORS

Drum
Magnetic pulley Magnet

Magnetic
POWERFUL MAGNETIC MEASURING MEASURING

substances
Conveyor
Magnetic plate
Nonmagnetic Nonmagnetic
pulley substances
Listed on pages 135, 136, 138 & 143. Listed on pages 137 & 139. Listed on pages 133 & 134.
TOOLS

Separation in fluid (wet) High magnetic force separator (dry) Nonferrous metal separator
A coolant separator (removal of iron particles in grinding fluid, A magnetic separator generating a high magnetic force of 2.6 T (26000 G). Aluminum items can be sorted and separated from noncombustible
waste oil, cooling oil), drum separator (collection of iron ores and Used for weak magnetic substances that cannot be removed sufficiently by wastes and large crushed wastes efficiently.
iron sand materials) or plate magnet (removal of iron particles a standard separator. A permanent magnet is used as a source of magnetic field for
deposited in oil tanks) is used. sorting, which is rotated at high speed to cause eddy current to
sort materials.
INSTRUMENTS MATERIALS

Oil
Magnetic drum
squeezing roller
Sludge
(iron particles)
Inlet
Aluminum,
etc.
MAGNETIC

Combustible
wastes Nonferrous metals
such as copper

Outlet

Listed on pages 111, 112, 113, 142 & 143. Listed on pages 139, 140 & 141. Listed on pages 131 & 132.

All data in this catalog is based on the Measurement Act in Japan and KANETEC
has standardized the indication of the magnetic flux density in the units of mT and T: 0.1 mT = 1 G 1 mT = 10 G 1 T = 10000 G
129
 Construction Scrap Materials Recycling System

MAGNETIC TOOLS & EQUIPMENT

Raw stone

FOR WELDING OPERATION

hopper Water
spraying Water
spraying
Secondary
crusher

MAGNET
LIFTING
Primary
Concrete blocks are first crushed to crusher
certain sizes (50 ‒ 60 cm square)

MAGBORE*
on the construction site and then
transported to a recycling facility.

Suspended
magnetic separator
Concrete blocks are crushed by a Vibration
Vibration

CONVEYANCE EQUIPMENT
crusher. Then foreign matters like conveyor
iron are removed by a magnet. screening
machine

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

Crushed concrete pieces are
screened by sizes. Concrete blocks
that could not be crushed by the

DEMAGNETIZER EQUIPMENT
primary crusher are crushed by the
secondary crusher. To prevent dust
Water
and dirt produced in these spraying
processes and to prevent noise, the
machines and surrounding areas are
covered and water is sprayed. Dust
is collected by a dust collector.

Water Suspended
Materials screened to various sizes spraying magnetic
separator

SEPARATORS FOR CONVEYANCE

become products as recycled
crushed stone and recycled sand.
These materials are used for road
construction and sewage Recycled Reinforcing
Recycled bars
construction. sand crushed stone Iron Water
pieces spraying

MEASURING POWERFUL MAGNETIC MAGNETIC

machine

Product stockyard

Non-Industrial Large Recyclable Wastes Processing System

SEPARATORS
Suspended

MATERIALS INSTRUMENTS TOOLS

magnetic
separator
Crusher

Combustibles and
non-combustibles
MAGNETIC MEASURING

sorting machine

Non-combustibles

Magnetic pulley
Combustibles

Incinerating
facility
Nonferrous
metal separator
Collected magnetic
substances

Collected Nonferrous
aluminum metals
Combustibles
130
 MAGNETIC SEPARATORS
Model BMR Model MES-J NONFERROUS METAL SEPARATORS
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

Limited natural resources to the future…

Supporting recycling operations.
MAGNET
LIFTING

Removing iron in wood- The eccentric magnet structure and consistent

MAGBORE*

Environmentally
processing plants for
high-speed rotation separates and collects
friendly
biomass power
generation also!
copper and brass as well as aluminum efficiently!
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

▲Combustible wastes
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

○Nonferrous metal (aluminum, etc.)

■Eccentric magnetic pole system that has a high separating

capacity and prevents crushed pieces from getting caught
Separation of nonferrous metals is achieved when a high velocity AC frequency of the
DEMAGNETIZER FOR CONVEYANCE

magnetic field produces a strong“eddy current”in nonferrous metals, which in turn produces a
magnetic field having repulsive action against the external magnetic field. This system
employs an eccentric pole system to completely separate nonferrous metals from other
materials. This system can prevent finely shredded or crushed nonferrous metal pieces from
BMR-C50A getting caught by the belt or drum shell and if they get caught in a gap between the belt and
the shell, they are forced to move to a place where no magnetic field exists and thus can be
removed easily. (See the figures on the left side.)
There is no fear of trouble from the system point of view. No cases of failures have been
Caught iron pieces reported when the system has been used for car shredding, which is considered to be one of
Removed iron pieces
the severest conditions of use.

■All models employ the IE3 motors!

SEPARATORS SEPARATORS

Concentric type Eccentric magnetic pole system The top runner motors in compliance with the Energy Conversation Act in Japan are used.

OD φ350 mm type introduced for possible

replacement of the rotating unit in existing machines!
POWERFUL MAGNETIC MEASURING MEASURING

［Features］ ［Application］
●Highly efficient separation and collection! Suitable for separation of nonferrous metals from small pieces shredded
The consistent high-speed rotation of 2500 rpm and the surface magnetic by car shredders, electronic equipment wastes, waste slugs, waste glass
flux density over 380 mT max. ensures collection of nonferrous metals (cullet), batteries, etc.
such as copper and brass as well as aluminum. <Other applications>
TOOLS

●Eccentric magnetic structure employed! ●Molding sand for aluminum casting and nonferrous metal casting.
This structure prevents iron pieces and other foreign matter from getting ●Refrigerators, washing machines and other scrapped appliances.
caught, which helps prolong the service life of the ●Screening of aluminum from bulky refuses and recyclable wastes.
drum shells and belts. ●Separation of aluminum from plastics such as plastic bottles and screw tops.
●Maintainability improved! ●Screening of aluminum from sludge discharged from fluidized beds.
INSTRUMENTS MATERIALS

KANETEC’s original construction has improved the ※This system is installed not only in wastes processing plants, materials
maintainability around the bearing. The feeders and materials discharge machines with adjust splitter, but also
maintenance time such as periodic inspection can as part of plants such as nonferrous metal separators.
be shortened and the line stop time can be reduced.
Maintainability can be improved further by using Automatic
the“automatic greasing unit”(optional) together. greasing unit
MAGNETIC

W3
L W2 (Effective width)
W1 (Trough width)
φD

<External view of BMR-C with casing> BMR-C50-S Special specification

131
 BMR / MES-J
■BMR with casing ［mm
（in）
］
Dimensions
Model Rotation Motor Conveyor Motor Feeder Motor Mass
φ

MAGNETIC TOOLS & EQUIPMENT

450
（17.7） 500
（19.6） 1420
（55.9） 4120
（162） 2000kg/4409 lb

FOR WELDING OPERATION

BMR-C350A
（55.1） φ350
1400 （13.7）
BMR-C375A 700
（27.5） 750
（29.5） 1670
（65.7） 4270
（168） 2.2kW 1.5kW 2350kg/5180 lb
BMR-C3100A 950
（37.4） 1000
（39.4） 1920
（75.5） 4440
（174） 2850kg/6283 lb
0.5kW×2
BMR-C50A 450
（17.7） 500
（19.6） 1485
（58.4） 4375
（172） 2400kg/5292 lb
BMR-C75A 700
（27.5） 750
（29.5） 1735
（68.3） 4525
（178） 3.7kW 2800kg/6174 lb
（69.2） φ494（19.4）
1760

MAGNET
BMR-C100A 950
（37.4） 1000
（39.4） 1000
（39.4） 5445
（214） 2.2kW 3400kg/7497 lb

LIFTING
BMR-C125A 1200
（47.2） 1250
（49.2） 1250
（49.2） 5410
（212） 4100kg/9040 lb
5.5kW 1.96kW×2
BMR-C150A 1450
（57.0） 1500
（59.0） 1500
（59.0） 5435
（213） 4300kg/9481 lb

Magnetic rotating units are available individually!

MAGBORE*
Magnets in existing lines may be replaced for upgrading!
D
B C

CONVEYANCE EQUIPMENT
A

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

φD
25

DEMAGNETIZER EQUIPMENT
F

BMR-5050A
<BMR rotating unit>

■BMR rotating unit only ［mm

（in）
］
Dimensions Standard
Model Drive Motor Mass
φ Accessory
BMR-3550A 500
（19.6） 482
（18.9） 805
（31.6） 1287
（50.6） 770
（30.3） 842
（33.1） Approx. 220kg/ 485 lb
BMR-3575A 2.2kW 750
（29.5） 607
（23.8） 930
（36.6） 1537
（60.5） 1020
（40.1） 1092
（42.9） φ350
（13.7） Approx. 260kg/ 573 lb
BMR-35100A 1000
（39.4） 732
（28.8） 1055
（41.5） 1787
（70.3） 1270
（50.0） 1342
（52.8） Approx. 300kg/ 661 lb
BMR-5050A 500
（19.6） 453
（17.8） 823
（32.4） 1276
（50.2） 795
（31.2） 867
（34.1） Approx. 500kg/1102 lb ・Motor

SEPARATORS FOR CONVEYANCE

・Coupling
BMR-5075A 3.7kW 750
（29.5） 578
（22.7） 974
（38.3） 1552
（61.1） 1045
（41.1） 1117
（43.9） Approx. 650kg/1433 lb ・Mounting bracket
BMR-50100A 1000
（39.4） 703
（27.6） 1099
（43.2） 1802
（70.9） 1295
（50.9） 1367
（53.8） φ494
（19.4） Approx. 800kg/1763 lb
BMR-50125A 1250
（49.2） 828
（32.5） 1253
（49.3） 2081
（81.9） 1545
（60.8） 1617
（63.6） Approx. 970kg/2138 lb
5.5kW
BMR-50150A 1500
（59.0） 953
（37.5） 1374
（54.0） 2326
（91.5） 1795
（70.6） 1867
（73.5） Approx. 1120kg/2469 lb

MEASURING POWERFUL MAGNETIC MAGNETIC

A type (concentric type) dedicated to
collection of aluminum cans available also!

MATERIALS INSTRUMENTS TOOLS SEPARATORS

MES-J345-S Special specification
Most suitable for
collect cylindrical cans.
MAGNETIC MEASURING

W1
15
φ3

MES-J

L W2

<External view of aluminum separator>

■Types dedicated to collection of aluminum cans ［mm
（in）
］
Dimensions
Model Rotation Motor Conveyor Motor Mass

MES-J345A 450（17.7） 1510（59.4） 1300kg/2866 lb

3.7kW 1.5kW
MES-J360A 600（23.6） 1660（65.3） 2650（104） 1375（54.1） 1450kg/3197 lb
MES-J390A 900（35.4） 2010（79.1） 5.5kW 2.2kW 1700kg/3748 lb
132
 MAGNETIC SEPARATORS
Model BST SUSPENDED ELECTROMAGNETIC SEPARATOR
“Air-cooled type” that uses no cooling oil Removing iron in wood-
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

Environmentally
processing plants for
to reduce environmental burden added to
friendly
biomass power
“BST Series”! generation also!

［Application］
Fully automatic discharge A suspended magnetic separator is suspended above a belt conveyor to continuously separate such
MAGNET
LIFTING

magnetic substances as iron pieces and lumps mixed in materials being transported on the conveyor.
This separator is most suitable for removal and collection of iron from such raw materials as slug, ore
and coal and from casting sand, bulky wastes, industrial wastes and ash after waste incineration.
［Features］
■Ideal magnet configuration realized!
MAGBORE*

Our valuable data based on experience and our pursuit to develop an optimum magnet based on
magnetic field analysis have realized a magnet configuration that exhibits the best separation and
collection performance.
To lengthen the iron piece discharge length, a general practice is to use permanent magnets together,
Oil-cooled but our original pole construction has eliminated a need of such magnets.
BST-90B-1
Selection of the oil-cooed type or the air-cooled type
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

●For the full-cover specification and for operations where ambient temperature is high or for long-
hour operation, select the oil-cooled type.
●For operation in an explosion-proof area or for relatively short-time operation, select the air-
cooled type. There are other conditions to consider for selection. Please fill the Selection Data
form at the end of the catalog and send it to our sales office.
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

■All models employ the IE3 motors!

The top runner motors in compliance with the Energy Conversation Act in Japan are used.
■A wide variety of models available!
Air-cooled BST-N90B-1 A wide variety of models are available to meet any belt width of belt conveyors. You can find the
optimum model for your specifications. Cross suspension as well as overhead pulley suspension
DEMAGNETIZER FOR CONVEYANCE

(parallel suspension) is available. (The corresponding conveyor belt width is the same.)
■Can be installed in any environment!
Compared with KANETEC’s previous model designs, the overall length and magnet height have been
minimized. BST type: The mass reduced by 30% to 40% and cooling oil amount by 10% to 50%, BST-N:
Since this type does not use cooling oil, the mass and size have been further reduced from those of BST
H

type. Thus, this model can be installed in any environment and under any conditions of installation.
B
L1
L2
B1
B2
■Easy maintenance for significant reduction in work time and running cost!
As the iron piece discharge belt drive system is directly coupled, such maintenance as chain tension
<BST type>
adjustment and lubrication, which need to be performed periodically with existing products, are no
longer necessary. BST-N type that requires no cooling oil offers running cost reduction and further
reduces the power consumption by the electromagnet by about 20% from that of the oil-cooled type.
■Trouble-free, robust magnetic separator!
SEPARATORS SEPARATORS

This highly rated system can be used continuously, day and night. The temperature rise of the
H

electromagnet is little and its influence on the performance drop is minimal. Also our original pole
construction is designed to reduce belt wear to ensure a long service life.
L1 B
L2 B1 ■A wide range of applications!
<BST-N type> B2 The robust construction allows this separator to be used outdoors under any conditions of use. It can
POWERFUL MAGNETIC MEASURING MEASURING

be used in a wide range of applications.

■Different shapes of Model: BST-**B-1/BST-N**B-1

Shape: Angle scraper
Model: BST-**B-2/BST-N**B-2
Shape: Scraper with folded SUS plate
Model: BST-**B-3/BST-N**B-3
Shape: Angle scraper with
scrapers according L-shaped rubber crosspiece
to models. Scraper Scraper Scraper
Rubber
crosspiece
TOOLS

Belt running direction Belt running direction Belt running direction

3 sizes added for selection of more suitable types! ［mm

（in）
］
INSTRUMENTS MATERIALS

Conveyor Belt Width Conveyor Belt Width Overall Dimensions Electromagnet Power Consumption Applicable
Model Mass
Cross Parallel Installation ₂ Dimensions Electromagnet* Drive Control
Length ₂ Unit
Standard (BST) Air-cooled (BST-N) suspension suspension Standard Air-cooled Standard Air-cooled ₁ ₁ Standard Air-cooled motor Standard Air-cooled
（17.7）
450 ‒ 300
（11.8）‒ 150
（5.90）
‒ 450 1640 1170 1095 610 650 650 680kg/ 625kg/
BST-65B-1.2.3 BST-N65B-1.2.3 1.5kW 1.29kW BSTR-65I
（25.5）
650 （17.7）
450 （7.87）
200 （17.7） （64.5） （46.0） （43.1） （24.0） 620 （25.5）（25.5） 1499 lb 1377 lb
1.5kW
600
（23.6）‒ 450
（17.7）‒ 150
（5.90）
‒ 600 1790 1320 1245 585 （24.4） 800 800 970kg/ 930kg/
BST-80B-1.2.3 BST-N80B-1.2.3 2.4kW 1.97kW BSTR-80I
（31.5）
800 （23.6）
600 （9.84）
250 （23.6） （70.4） （51.9） （49.0） （23.0） （31.5）（31.5） 2138 lb 2050 lb
700
（27.5）‒ 600
（23.6）‒ 200
（7.87）
‒ 750 1900 1500 1400 645 675 900 900 1370kg/ 1310kg/
BST-90B-1.2.3 BST-N90B-1.2.3 3.1kW 2.25kW BSTR-90I
MAGNETIC

900
（35.4） 750
（29.5） （11.8）
300 （29.5） （74.8） （59.0） （55.1） （25.3） （26.5）（35.4）（35.4） 3020 lb 2888 lb
（31.5）
800 ‒ 750
（29.5）‒ 250
（9.84）
‒ 2250 1000 1000 2070kg/ 1930kg/
BST-100B-1.2.3 BST-N100B-1.2.3 4.0kW 3.22kW BSTR-100I
1000
（39.4） 900
（35.4） （13.7）
350 900 （88.5） 1720 1565 825 （39.4）（39.4） 4564 lb 4254 lb
（37.4）
950 ‒ 750
（29.5）‒ 250
（9.84）
‒ （35.4） 2300 （67.7） （61.6） （32.4） 1050 1050 2600kg/ 2500kg/
BST-105B-1.2.3 BST-N105B-1.2.3 4.66kW 3.73kW 2.2kW BSTR-105I
1050
（41.3） 950
（37.4） （13.7）
350 （90.5） 710 （41.3）（41.3） 5732 lb 5711 lb
（37.4）
950 ‒ 850
（33.4）‒ 300
（11.8）
‒ 2400 820 （27.9） 1150 1150 3100kg/ 3080kg/
BST-115B-1.2.3 BST-N115B-1.2.3 5.2kW 4.25kW BSTR-115I
1150
（45.2） 1050
（41.3） （13.7）
350 1050 （94.4） 1865 1715 （32.2） （45.2）（45.2） 6834 lb 6790 lb
（41.3）
1050 ‒ 950
（37.4）‒ 300
（11.8）
‒ （41.3） 2450 （73.4） （67.5） 875 1200 1200 3400kg/ 3360kg/
BST-120B-1.2.3 BST-N120B-1.2.3 5.58kW 4.5kW BSTR-120I
1200
（47.2） 1050
（41.3） （13.7）
350 （96.4） （34.4） （47.2）（47.2） 7495 lb 7407 lb
（43.3）
1100 ‒ 1000
（39.4）‒ 300
（11.8）
‒ 1200 2800 2150 1965 910 840 1300 1300 4500kg/ 4400kg/
BST-130B-1.2.3 BST-N130B-1.2.3 6.6kW 5.36kW BSTR-130I
1300
（51.1） 1200
（47.2） （15.7）
400 （47.2） （110） （84.6） （77.3） （35.8） （33.0）（51.1）（51.1） 9921 lb 9700 lb
（51.1）
1300 ‒ 1100
（43.3）‒ 300
（11.8）
‒ 2900 835 1400 1400 5200kg/ 5200kg/
BST-140B-1.2.3 BST-N140B-1.2.3 7.48kW 6.09kW 3.7kW BSTR-140I
1400
（55.1） 1300
（51.1） （15.7）
400 1400 （114） 2350 2165 （32.8） 845 （55.1）（55.1） 11464 lb 11464 lb
（51.1）
1300 ‒ 1200
（47.2）‒ 300
（11.8）
‒ （55.1） 3000 （92.5） （85.2） 805 （33.2） 1500 1500 5500kg/ 5390kg/
BST-150B-1.2.3 BST-N150B-1.2.3 8.7kW 6.98kW BSTR-150I
1500
（59.0） 1400
（55.1） （17.7）
450 （118） （31.6） （59.0）（59.0） 12125 lb 11882 lb
1500
（59.0）
‒ 1400
（55.1）
‒ 400
（15.7）
‒ 1600 3200 2570 2385 865 907 1700 1700 7500kg/ 7350kg/
BST-170B-1.2.3 BST-N170B-1.2.3 10.4kW 8.1kW 5.5kW BSTR-170I
（66.9）
1700 （62.9）
1600 （21.6）
550 （62.9） （126）（101.2） （93.8） （34.0） （35.7）（66.9）（66.9） 16535 lb 16203 lb
※A type that uses permanent magnets together is also available. ※A type with a dustproof cover is also available.
133 ※For overhead pulley suspension (parallel suspension), suspension fixtures need to be changed partially.※The electromagnet power consumption is based on 200 VAC (50 Hz).
※The belt conveyor width for each model is for reference only. As the model to be selected can be different depending on the flow width and volume of objects to process, please consult with us.
 BST / BST-N / BSTR / SPM
Model BSTR CONTROL UNIT
A new compact type; one third of the volume of the

MAGNETIC TOOLS & EQUIPMENT

Indoor type

FOR WELDING OPERATION

conventional unit! Space saving and wall mountable!
［mm
（in）
］
700 Power Electromagnet Drive Motor Dimensions
Model Construction Mass
660 Source Output Output

MAGNET
600 300 6 BSTR-65I

LIFTING
90 VDC 1.5kW
200VAC1.5kW
BSTR-80I 90 VDC 2.4kW

100
BSTR-90I 90 VDC 3.1kW

BSTR-100I 180 VDC 4.0kW

200VAC2.2kW
BSTR-105I 180 VDC 4.7kW

MAGBORE*
※1 1000 800 Approx. 70 kg/154 lb
※2 Indoor,
200 VAC 180 VDC 5.2kW （39.4）（31.5）

H
A
BSTR-115I 50/60Hz dustproof,
3φ wall mounttype
BSTR-120I 180 VDC 5.6kW

BSTR-130I 270 VDC 6.6kW

4-φ14 200VAC3.7kW

100
BSTR-140I 180 VDC 7.5kW

CONVEYANCE EQUIPMENT
BSTR-150I 270 VDC 8.7kW
Wiring 1200 1000
port BSTR-170I 180 VDC 10.4kW 200VAC5.5kW （47.2） Approx. 90kg/198 lb
150

50 200 （39.4）

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

※1: A power source of 220 VAC, 60 Hz, 3φ can also be used.
BSTR-90I ※2 The outdoor type has partially different specifications.
50

■Exchanging of electromagnet cooling oil Types of cooling oil

(JIS C2320 Electrical Insulating Oils Type 1, No. 2, No. 4)
Models and required amount of oil

DEMAGNETIZER EQUIPMENT
※The values are JIS Standard values.
Model Amount
（L） Model Amount
（L） Model Amount
（L）
Property Total Acid Number Flashing Point Specific Gravity Breakdown
BST- 65B 80 BST-105B 225 BST-140B 345 Manufacture (Brand) (mgKOH/g) (PM) ℃ 15/4℃ Voltage (KV)
Idemitsu Kosan
BST- 80B 100 BST-115B 265 BST- 150B 450 (Transformer Oil G)
Showa Shell Sekiyu
BST- 90B 120 BST- 120B 345 BST- 170B 570 0.02 max. 130 min. 0.91 max. 30 min.
(Shell Transformer Oil A)
JX Nippon Oil & Energy Corp.
BST-100B 235 BST- 130B 415
(High Voltage Insulating Oil K)

※Exchange oil once every five years. (The frequency varies slightly depending on ※Cooling oil used by KANETEC; Idemitsu Kosan Transformer Oil G
models and run hours.) ※By using a cooling oil having a high flashing point, it is possible to offer a product that is excluded from the
As for special models, the amount depends on sizes of electromagnets. (Increased) dangerous goods stipulated in the Fire Services Act in Japan.

SEPARATORS FOR CONVEYANCE

Model SPM SUSPENDED PERMANENT MAGNETIC SEPARATOR
The suspended permanent magnetic separator employs a fully automatic discharge
Fully automatic discharge type system by using a powerful permanent magnet. The operating method is similar to
Removing iron in wood- that of the suspended electromagnetic separator. This model is suitable for

MEASURING POWERFUL MAGNETIC MAGNETIC

Environmentally removing iron from relatively thin layer of materials on a belt conveyor.
friendly processing plants for biomass
［Application］
power generation also!
Suitable for removing iron from raw materials used in the food industry, chemical
■All models employ the IE3 motors! industry and various other industries, and can also be installed in wastes sorting
The top runner motors in compliance with the Energy Conversation systems to remove iron. This model is also suitable for removing iron in operations
Act in Japan are used. (Power consumption 0.75 KW or over) of industrial wastes sorting systems.
［Features］

SEPARATORS
●Permanent magnet type, requiring no DC power source.
●Simple but robust construction for easy maintenance.
L2 ●The weather resistant construction allows this separator to be easily installed on
existing outdoor conveyors.
Turnbuckle
●The permanent magnet system requires minimal maintenance cost.

MATERIALS INSTRUMENTS TOOLS

SPM-60FA ●Usable for wide-belt conveyors and special designs of interface of discharge
chutes. (Long type SPM-65120A ‒ 65160A)
B3
●A powerful type is also available.
●An overhead pulley suspension (parallel suspension) type is also available.
H

MAGNETIC MEASURING

(Special fabrication)
L1
B2 ●An optional intrusion preventing plate is also available.
B
●The motor breaker is optionally available for simple motor ON/OFF operation and
L B1
prevention of burn due to motor overloading. (The breaker is available individually.)
※The shape of the suspending bracket is different amongSPM-100FA, 120FA, 65120A ‒ 65160A.
［mm
（in）
］
Conveyor Belt Width（※1） Conveyor Belt Width Overall Dimensions Magnet Size Power Consumption
Model Mass
Cross suspension Parallel suspension（※2） Installation Length ₁ ₂ ₃ ₁ ₂ Drive motor
SPM-30F ‒ 400（15.7） ‒ 90（3.54）‒130（5.11） 300（11.8）1000（39.4） 677（36.6） 440（17.3） 470（18.5） 400（15.7） 250（9.84） 170kg/ 374lb
248（9.76） 0.4 kW
SPM-40F 300（11.8）‒ 500（19.6） ‒ 350（13.7） 100（3.93）‒150（5.90） 400（15.7）1100（43.3） 777（30.6） 540（21.2） 570（22.4） 500（19.6） 350（13.7） 270kg/ 595lb
SPM-60FA 500（19.6）‒ 650（25.5） 300（11.8）‒ 450（17.7） 150（5.90）‒200（7.87） 600（23.6）1270（50.0）1015（39.9） 700（27.5） 770（30.3） 650（25.5） 490（19.2） 390kg/ 859lb
242（9.52）
SPM-80FA 650（25.5）‒ 800（31.5） 500（19.6）‒ 650（25.5） 700（27.5）1470（57.8）1115（43.9） 900（35.4） 870（34.2） 800（31.5） 650（25.5） 0.75kW 610kg/1344lb
SPM-100FA 800（31.5）‒1000（39.4） 650（25.5）‒ 800（31.5） 900（35.4）1900（74.8）1435（56.5） 1100（43.3）1170（46.0）1000（39.4） 800（31.5） 1150kg/2535lb
312（12.2）
SPM-120FA 1100（43.3）‒1300（51.1） 800（31.5）‒ 950（37.4） 1050（41.3）2200（86.6）1605（63.1） 1400（55.1）1320（51.9）1300（51.1） 950（37.4） 1.5 kW 1600kg/3527lb
200（7.87）‒250（9.84）
SPM-65120A ‒1050（41.3） ‒ 1870（73.6） 1000（39.4） 1200（47.2） 880kg/1940lb
SPM-65140A ‒1200（47.2） ‒ 700（27.5）2070（81.5）1147（45.1） 258（10.1） 1200（47.2） 890（35.0）1400（55.1） 650（25.5） 0.75kW 990kg/2182lb
SPM-65160A ‒1400（55.1） ‒ 2270（89.3） 1400（55.1） 1600（62.9） 1100kg/2425lb
※The outdoor specification is the standard.
(※1) The belt conveyor width for each model is for reference only. As the model to be selected can be different depending on the flow width and volume of objects to process, please consult with us.
(※2) The parallel suspension specification is optional.
134
 MAGNETIC SEPARATORS
Model HEM-C ROUND ELECTROMAGNET FOR IRON REMOVAL
［Application］
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

Air-cooled The standard suspended electromagnet designed for removing iron from
substances on conveyors. This model is suitable for removing iron from ores
and various materials (glass, ceramics, sugar, paper, chemicals, etc.) as well as
from crushed stone in crushing plants and from casting sand in casting plants.
［Features］
●Light weight and compact for easy handling.
MAGNET
LIFTING

●Minimum maintenance and weather resistant.

MAGBORE*

HEM-70C
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

Connection diagram

Controller
Electromagnet
for removal of iron AC 200VAC
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

Cabtyre cable 5 m included

［mm
（in）
］
Suspension hinge ３−φｄ Dimensions
Conveyor Conveyor Power Applicable
Model Mass
Belt Width Installation Length φ Consumption Rectifier
DEMAGNETIZER FOR CONVEYANCE

HEM-40C 350
（13.7）120
（4.72）
‒150
（5.90） 400
（15.7）240
（9.44） 16
（0.62） 0.51kW 170kg/ 375 lb
KR-A208
HEM-50C 400
（15.7）130
（5.11）
‒180
（7.08） 500
（19.6）300
（11.8） 0.82kW 310kg/ 683 lb
HEM-65CN 500
（19.6）150
（5.90）
‒200
（7.87） 650
（25.5）320
（12.5） 22
（0.86） 1.5/1.8kW 340kg/ 749 lb HEMR-65CNI
HEM-75CN 600
（23.6）150
（5.90）
‒250
（9.84） 750
（29.5）330
（12.9） 2.0/2.4kW 460kg/1014 lb HEMR-75CNI
Ｈ

HEM-90CN 750
（29.5）200
（7.87）
‒300
（11.8） 900
（35.4）400
（15.7） 26
（1.02） 2.6/3.1kW 830kg/1829 lb HEMR-90CNI
HEM-110CN 900
（35.4）250
（9.84）
‒350
（13.7）1100
（43.3）465
（18.3） 32
（1.25） 3.9/4.7kW 1350kg/2976 lb HEMR-110CNI
HEM-130CN 1050（41.3）300（11.8）‒450（17.7）1300（51.1）535（21.0） 36（1.41） 6.1/7.4kW 2300kg/4850 lb HEMR-130CNI
HEM-150CN 1200（47.2）400（15.7）‒550（21.6）1500（59.0）585（23.0） 42（1.65） 7.3/8.8kW 3350kg/7385 lb HEMR-150CNI
※The power consumption is based on 200 VAC, 50/60 Hz. (HEM-40C/50C consume the same amount of electricity on both 50 Hz and 60 Hz.)
φＤ ※The belt conveyor width for each model is for reference only. As the model to be selected can be different depending on the flow width and
volume of objects to process, please consult with us.

Model HEM-BS SUSPENDED ELECTROMAGNET FOR IRON REMOVAL

SEPARATORS SEPARATORS

［Application］ ［Features］
Oil-cooled This model utilizes the electromagnet design taken from the ●There are no moving parts and the
suspended electromagnetic separator and is recommended construction is simple for trouble-
POWERFUL MAGNETIC MEASURING MEASURING

for use where there is a relatively small amount of mixed free operation.
iron pieces on conveyors. This model is for use on large ●The oil-cooled system can keep
conveyors as with Model BST, but is most suitable for temperature rise and heating
operations where the amount of mixed iron pieces is small below a certain level when in
and attracted iron pieces can be removed periodically. continuous operation. (For cooling
oil used, see page 134.)
TOOLS

L1 B1
●The separating capacity is about
the same as Model BST.
●The magnetic separation efficiency
is high because an effective
magnetic field is produced all over
INSTRUMENTS MATERIALS

the attractive face.

●The applicable belt width has
H1

been widened.
H

HEM-BS65 L B
［mm
（in）
］
MAGNETIC

Conveyor Conveyor Installation Dimensions Power Applicable

Model Mass
Belt Width Length Consumption Rectifier
HEM-BS65 450
（17.7） 150
（5.90）
‒200
（7.87） 650
（25.5） 650
（25.5） 347
（13.6） 755
（29.7） 1025
（40.3） 605
（23.8） 1.5Kw 590kg/ 1300 lb HEMR-BS 65
HEM-BS80 600
（23.6） 150
（5.90）
‒250
（9.84） 800
（31.5） 800
（31.5） 328
（12.9） 905
（35.6） 1175
（46.2） 570
（22.4） 2.4Kw 870kg/ 1918 lb HEMＲ-BS 80
HEM-BS90 750
（29.5） 200
（7.87）
‒300
（11.8） 900
（35.4） 900
（35.4） 349
（13.7） 1005
（39.5） 1360
（53.5） 600
（23.6） 3.1Kw 1200kg/ 2646 lb HEMＲ-BS 90
HEM-BS100 900
（35.4） 250
（9.84）
‒350
（13.7） 1000
（39.4） 1000
（39.4） 485
（19.0） 1115
（43.8） 1583
（62.3） 790
（31.1） 4.0Kw 1820kg/ 4013 lb HEMＲ-BS100
HEM-BS115 1050
（41.3） 300
（11.8）
‒350
（13.7） 1150
（45.2） 1150
（45.2） 496
（19.5） 1265
（49.8） 1733
（68.2） 785
（30.9） 5.2Kw 2800kg/ 6174 lb HEMＲ-BS115
HEM-BS130 1200
（47.2） 300
（11.8）
‒400
（15.7） 1300
（51.1） 1300
（51.1） 593
（23.3） 1431
（56.3） 1926
（75.8） 890
（35.0） 6.6Kw 4100kg/ 9040 lb HEMＲ-BS130
HEM-BS150 1400
（55.1） 300
（11.8）
‒450
（17.7） 1500
（59.0） 1500
（59.0） 498
（19.6） 1643
（64.6） 2126
（83.7） 775
（30.5） 8.7Kw 4900kg/10804 lb HEMＲ-BS150
HEM-BS170 1600
（62.9） 400
（15.7）
‒550
（21.6） 1700
（66.9） 1700
（66.9） 575
（22.6） 1843
（72.5） 2326
（91.5） 840
（33.0） 10.4Kw 6500kg/14332 lb HEMＲ-BS170
※The power consumption is based on 200 VAC (50 Hz).

135 ※The belt conveyor width for each model is for reference only. As the model to be selected can be different depending on the flow width and volume of objects to process, please consult with us.
 HEM-C / HEM-BS / KPD / KPDL
Model KPD PERMANENT MAGNETIC DRUM
KPD-4040B−60110B

MAGNETIC TOOLS & EQUIPMENT

FOR WELDING OPERATION
L
KPD-3030B−3060B 1 2 3 4

L B
1 2 3 4 B1
B
B1

MAGNET
LIFTING
φD
φd
350
φD
φd
50 50
50 50
KPD-4080B 5 5

MAGBORE*
［Application］ ［Features］
Used for sorting wastes and removing iron from granular materials in ●A powerful permanent magnet is used, requiring no power source.
mining, ceramic, chemical and food industries. ●The outer nonmagnetic drum is rotated to automatically discharge iron.
●The drum shell is made of nonmagnetic stainless steel.
●KPD-HA 180 mT (1800 G), HB 250 mT (2500 G), HC 300 mT (3000

CONVEYANCE EQUIPMENT
G) and HE 500 mT (5000 G) Series are also available.
●In addition to the permanent magnet type, an electromagnet type (KED)

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

is also available. ［mm （in）
］

Processing Dimensions Surface Magnetic Recommended Recommended

Model Mass
Capacity ℓ₂ ℓ₃ ℓ₅ ℓ₄ ℓ₁ φ Flux Density Revolution Motor
KPD- 3030B 025㎥ /h 268
（10.5） 300
（11.8）200
（7.87） 225
（8.85） 690
（27.1） 580
（22.8） 60kg/ 132 lb

DEMAGNETIZER EQUIPMENT
KPD- 3040B 035㎥ /h 300 368 （14.4） 400
（15.7）250
（9.84） 275
（10.8） 790
（31.1） 680
（26.7） 120 145 45 80kg/ 176 lb
30‒45rpm
KPD- 3050B 045㎥ /h （11.8） 468
（18.4） 500
（19.6）300
（11.8） 325
（12.8） 890
（35.0） 780 （4.72）
（30.7） （5.70）
（1.77） 100kg/ 220 lb
KPD- 3060B 055㎥ /h 568
（22.3） 600
（23.6）350
（13.7） 375
（14.7） 990
（38.9） 880
（34.6）
120kg/ 264 lb
KPD- 4040B 045㎥ /h 330
（12.9） 430
（16.9）260
（10.2） 292
（11.5） 830
（32.6） 710
（27.9）
0.4kW
KPD- 4050B 060㎥ /h 400 430
（16.9） 530
（20.8）310
（12.2） 342
（13.4） 930
（36.6） 810
（31.8） 55 150kg/ 330 lb
25‒40rpm
KPD- 4065B 075㎥ /h （15.7） 580
（22.8） 680
（26.7）385
（15.2） 417
（16.4）1080
（42.5） 960
（37.8） （2.16） 200kg/ 440 lb
KPD- 4080B 090㎥ /h 730
（28.7） 830
（32.6）460
（18.1） 492
（19.3）1230
（48.4）1110
（43.7） 100mT 250kg/ 551 lb
KPD- 5050B 080㎥ /h 430
（16.9） 530
（20.8）310
（12.2） 342
（13.4） 930
（36.6） 810
（31.8） （1000G） 215kg/ 474 lb
KPD- 5065B 105㎥ /h 500 580 （22.8） 680
（26.7）385
（15.2） 417
（16.4）1080
（42.5） 960
（37.8） 123 155 60 280kg/ 617 lb
20‒35rpm
KPD- 5080B 125㎥ /h （19.6） 730
（28.7） 830
（32.6）460
（18.1） 492
（19.3）1230
（48.4）1110 （4.84）
（43.7） （6.10）
（2.36） 345kg/ 760 lb
KPD- 5095B （34.6） 980
880 （38.5）535
（21.0） 567
（22.3）1380
（54.3）1260
（49.6） 410kg/ 903 lb

SEPARATORS FOR CONVEYANCE

150㎥ /h
KPD- 6065B 580
（22.8） 680
（26.7）385
（15.2） 417
（16.4）1080
（42.5） 950
（37.4） 0.75kW 335kg/ 738 lb
KPD- 6080B 190㎥ /h 600 730 （28.7） 830
（32.6）460
（18.1） 492
（19.3）1230
（48.4）1100
（43.3） 65 410kg/ 903 lb
15‒30rpm
KPD- 6095B 220㎥ /h （23.6） 880
（34.6） 980
（38.5）535
（21.0） 567
（22.3）1380
（54.3）1250
（49.2） （2.55） 490kg/1080 lb
KPD-60110B 240㎥ /h 1030
（40.5）1130
（44.4）610
（24.0） 642
（25.2）1530
（60.2）1400
（55.1） 1.5kW 570kg/1257 lb

MEASURING POWERFUL MAGNETIC MAGNETIC

Model KPDL LARGE PERMANENT MAGNETIC DRUM
［Application］
L This model is recommended for removal of large
B
B1 iron pieces and iron lumps from various raw
materials as well as from bulky wastes.

SEPARATORS
［Features］
●The super powerful, large magnet generates a
φD
φd

uniform and strong magnetic force.

●The robust construction can withstand impacts
H

L1
by large iron pieces when they are collected.
●Scrapers for complete removal and collection
MATERIALS INSTRUMENTS TOOLS
KPDL-3048A are provided.
［mm
（in）
］
●The magnet position adjusting turnbuckle is
Processing Surface Recommended
Dimensions installed to enable adjustment of the collection
Capacity, Magnetic Revolution Recommended
Model Mass position as desired.
（ ）
MAGNETIC MEASURING

Magnetized Flux Over Under Motor

substance × 75% φ Density Feed Feed ●In addition to the permanent magnet type, an
KPDL-3026A 12‒17t/h
460 660 1140 1420 700kg/ electromagnet type (KEDL) is also available.
（18.1）
（25.9）
（44.8）
（55.9） 1543 lb

KPDL-3048A 20‒32t/h
1020 1220 1700 1980 760 100 1190
（40.1）
（48.0）
（66.9）
（77.9）
（29.9）
（3.93）
（46.8）
25‒30
rpm
1000kg/
2205 lb
■Measurements of magnet attractive force
1320 1520 2000 2280 1200kg/ (attraction distance) ［mm（in）
］
KPDL-3060A 28‒40t/h 1.5kW
（51.9）
（59.8）
（78.7）
（89.7） 2646 lb
No. Test Piece to Attract Weight (g) Attraction Distance (mm)
660 930 1430 1730 1000kg/
KPDL-3636A 16‒24t/h 1 12-cm nail 10g/0.02 lb 400
（15.7）
（25.9）
（36.6）
（56.3）
（68.1） 2205 lb
2 Hex bolt M10 × 70 40g/0.09 lb 325
（12.8）
950 1220 1720 2020 100mT 26‒35 1350kg/
KPDL-3648A 25‒36t/h
（37.4）
（48.0）
（67.7）
（79.5） 930 （1000G） rpm 2976 lb 3 Hex bolt M16 × 100 60g/0.13 lb 300
（11.8）
1250 1520 2020 2320 （36.6） 1700kg/ 4 Hex bolt M20 × 100 280g/0.61 lb 275
（10.8）
KPDL-3660A 35‒50t/h
（49.2）
（59.8）
（79.5）
（91.3） 120 1260 20‒25 3748 lb
2.2kW 5 Hex nut M20 30g/0.06 lb 150
（5.90）
1550 1820 2320 2620 （4.72）
（49.6） rpm 2000kg/
KPDL-3672A 42‒60t/h 6 Round bar φ20 × 200 480g/1.06 lb 350
（13.7）
（61.0）
（71.6）
（91.3）
（103.1） 4409 lb
7 Steel plate 25 × 30 × 65 350g/0.87 lb 200
（7.87）
1250 1520 2180 2520 2500kg/
KPDL-4260A 40‒56t/h
（49.2）
（59.8）
（85.8）
（99.2） 1080 5512 lb 8 Steel plate 6 × 55 × 280 720g/1.59 lb 400
（15.7）
3.7kW
1550 1820 2480 2820 （42.5） 3000kg/ 9 Angle 40 × 40 × 350 930g/2.05 lb 400
（15.7）
KPDL-4272A 40‒65t/h
（61.0）
（71.6）
（97.6）
（111.0） 6614 lb
※Values by KPDL-3660A.
136
 MAGNETIC SEPARATORS
Model KDS DRUM TYPE MAGNETIC SEPARATOR
［Application］
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

A motor-driven magnetic separating system incorporating a permanent magnetic drum in a casing

automatically removes and collects iron pieces, bolts, etc. from raw materials loaded from a hopper.
［Features］
●Very easy to handle.
●Compact and light weight for easy relocation and installation.
●The powerful magnetic force type having a large processing capacity.
MAGNET
LIFTING

●KDS-HA-C 180 mT (1800 G), HC-C 300 mT (3000 G), HE-C 500 mT (5000 G) Series are also
available.
Loading port
Adjust plate
MAGBORE*

Rotary
drum Magnet
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

Magnetic substances Nonmagnetic

KDS-300C substances discharge port
discharge port (Iron pieces)
［mm
（in）
］
Processing Dimensions Drum Surface Magnetic Drive
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

Model Mass
Capacity φ ₁ Flux Density Motor
KDS- 250C 15㎥/h 540
（21.2） 700
（27.5） 725
（28.5） 250
（9.84） 250
（9.84） 90mT
（ 900G） 0.2kW 125kg/ 275 lb
KDS- 300C 25㎥/h 800
（31.5） 300
（11.8） 150kg/ 330 lb
KDS- 500C 40㎥/h 590
（23.2） 950
（37.4） 800
（29.5） 300
（11.8） 450
（17.7） 230kg/ 507 lb
KDS- 600C 50㎥/h 1100
（43.3） 600
（23.6） 0.4kW 350kg/ 771 lb
KDS- 800B 75㎥/h 1000
（39.4） 680
（26.7） 100mT
（1000G） 450kg/ 992 lb
（36.6）
930 850
（33.4） 400
（15.7）
DEMAGNETIZER FOR CONVEYANCE

KDS- 900B 90㎥/h 1150

（45.2） 830
（32.6） 550kg/1213 lb
KDS-1100BA 105㎥/h 1000
（39.4） 680
（26.7） 600kg/1323 lb
（45.2）
1150 1100
（43.3） 500
（19.6） 0.75kW
KDS-1200BA 125㎥/h 1150
（45.2） 830
（32.6） 740kg/1631 lb
※Pre-test is available. ※The Processing Capacity is presented as a guide. The listed values may drop depending on substances to process.
※KDS-1100BA/1200BA use the IE3 motor.

（L） （B）

L B
SEPARATORS SEPARATORS

B1
φD
H
H

φ
D

B1
POWERFUL MAGNETIC MEASURING MEASURING

〈KDS-B〉 〈KDS-C〉

An example of fabrication of KDS-300B-2-S 2-stage drum type magnetic separator

TOOLS

（760）
（1084）
450 （66）
300 290
INSTRUMENTS MATERIALS

300
1370
MAGNETIC

1870

250
720
650

1315 730

137
 KDS / KER / KPR
Model KER ELECTROMAGNETIC PULLEY
［Application］ ［mm
（in）
］

MAGNETIC TOOLS & EQUIPMENT

These pulleys have been widely used in wastes Dimensions

FOR WELDING OPERATION

Belt Power Applicable
Model Mass
Width φ φ ₁ φ ₂ Keyway Consumption Rectifier
processing systems and also used to remove iron ₁ ₂
300（11.8） 350（13.7） 880 （34.6） 300W 140kg/ 308 lb
from granular materials in chemical, steel making, KER- 3030C
KER- 3035C 350（13.7） 400（15.7） 930 （36.6） 360W 155kg/ 341 lb KR-A203
coal, food and mining industries. 300 50（1.96） 45（1.77） 130（5.11） 60（2.36）
KER- 3040C 400（15.7） 450（17.7） 980 （38.5） 400W 175kg/ 385 lb
The electromagnetic pulley is equipped with a （11.8）
KER- 3045C 450（17.7） 500（19.6） 1030 （40.5） 14（0.55）×5.5（0.21） 450W 195kg/ 429 lb
rectifier having an ammeter. The power source is

MAGNET
KER- 3050C 500（19.6） 550（21.6） 1110 （43.7） 140（5.51） 490W 210kg/ 463 lb

LIFTING
single-phase 200 VAC and the output is 180 VDC. KER- 4040C 400（15.7） 450（17.7） 1030 （40.5） 55（2.16） 50（1.96） 70（2.75） 550W 380kg/ 837 lb
KER- 4045C 450（17.7） 500（19.6） 1080 （42.5） 620W 430kg/ 948 lb
400 150（5.90）
KER- 4050C 500（19.6） 550（21.6） 1140 （44.8） 680W 475kg/ 1047 lb KR-A208
（15.7） 60（2.36） 55（2.16） 16（0.62）×6（0.23）
KER- 4060C 600（23.6） 650（25.5） 1240 （48.8） 800W 560kg/ 1235 lb
80（3.15）
KER- 4075C 750（29.5） 820（32.2） 1430 （56.3） 1000W 700kg/ 1543 lb
65（2.55） 60（2.36）

MAGBORE*
KER- 5050C 500（19.6） 550（21.6） 1169 （46.0） 950W 730kg/ 1609 lb
160（6.29） 18（0.70）×7（0.27）
KER- 5060C 600（23.6） 500 650（25.5） 1279 （50.3） 1000W 900kg/ 1984 lb
70（2.75） 65（2.55）
KER- 5075C 750（29.5）（19.6） 820（32.2） 1449 （57.0） 1300W 1130kg/ 2491 lb
90（3.54）
KER- 5090C 900（35.4） 1000（39.4） 1649 （64.9） 1500W 1300kg/ 2866 lb
KER-4060C
KER- 6060C 600（23.6） 650（25.5） 1299 （51.1） 75（2.95） 70（2.75） 170（6.69） 1200W 1320kg/ 2910 lb KR-A215
600 20（0.78）×7.5（0.29）
KER- 6075C 750（29.5） 820（32.2） 1479 （58.2） 1500W 1580kg/ 3483 lb
（23.6） 100（3.93）

CONVEYANCE EQUIPMENT
KER- 6090C 900（35.4） 1679 （66.1） 80（3.15） 75（2.95） 180（7.08） 1800W 1900kg/ 4189 lb
1000（39.4）
KER- 7590C 900（35.4） 1810 （71.2） 230（9.05） 180（7.08） 2800W 1800kg/ 3968 lb
100（3.93） 90（3.54）
1000（39.4） 750 1100（43.3） 2020 （79.5） 3400W 2200kg/ 4850 lb

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

KER- 75100C
250（9.84） 200（7.87） 25（0.98）×9（0.35）
KER- 75120C 1200（47.2）（29.5） 1300（51.1） 2170 （85.4） 3800W 2600kg/ 5732 lb KR-A230
110（4.33） 95（3.74）
KER- 75150C 1500（59.0） 1600（62.9） 2570（101.2） 280（11.0） 250（9.84） 4200W 3100kg/ 6834 lb
KER- 90100C 1000（39.4） 1100（43.3） 2050 （80.7） 250（9.84） 230（9.05） 4300W 3000kg/ 6614 lb
L 900
KER- 90120C 1200（47.2） 1300（51.1） 2280 （89.7） 125（4.92）100（3.93） 280（11.0） 250（9.84） 4700W 3500kg/ 7716 lb
（35.4）
L1 B L1 L 2 KER- 90150C 1500（59.0） 1600（62.9） 2670（105.1） 300（11.8） 300（11.8） 28（1.10）×10（0.39） 5200W 4400kg/ 9700 lb

DEMAGNETIZER EQUIPMENT
KER-100120C 1200（47.2） 1000 1300（51.1） 2490 （98.0） 330（12.9） 5500W 4200kg/ 9259 lb LMT-A240
135（5.31）110（4.33）
KER-100150C 1500（59.0）（39.4） 1600（62.9） 2900（114.2）
φd 2

360（14.1） 6500W 5000kg/11023 lb

360（14.1）
φd 1

φd 1

KER-120120C 1200（47.2） 1200 1300（51.1） 2490 （98.0） 330（12.9） 6500W 5400kg/11905 lb

140（5.51）120（4.72） 32（1.26）×11（0.43）
φD

KER-120150C 1500（59.0）（47.2） 1600（62.9） 2900（114.2） 360（14.1） 7600W 6500kg/14330 lb LMT-A250

Keyway Note: The slip ring SRB-100 is used for 3030C ‒ 4060C and SR-20 for 4075C and over.

Model KPR PERMANENT MAGNETIC PULLEY

Environmentally
Removing iron in ［Application］
friendly wood-processing These pulleys are utilized to remove iron as with electromagnetic pulleys.

SEPARATORS FOR CONVEYANCE

plants for biomass ［Features］
●Powerful magnetic force. Its effect lasts almost perpetually.
power generation
●No power source is required to generate the magnetic force.
also! ●Robust construction and easy handling and installation.
●A high magnetic force type exceeding the surface max. magnetic flux density 1.3 T (13000 G) is

MEASURING POWERFUL MAGNETIC MAGNETIC

also available. (KPR-H16 Series) This pulley can also be used to sort and collect weak magnetic
substances such as stainless steel from raw materials.
［mm
（in）
］
Belt Dimensions Surface Max.
Model Magnetic Mass
Width φ ₁ ₂ ₁ ₂ Keyway Flux Density
KPR- H1635 350（13.7） 440（17.3） 670（26.3） 1.3T 80kg/ 176 lb
160
KPR- H1640 400（15.7） 500（19.6） 730（28.7） 60（2.36） ̶ 100（3.93） ̶ 20（0.78）×10（0.39）（13000G） 90kg/ 198 lb
（6.29）
min.

SEPARATORS
KPR- H1645 450（17.7） 550（21.6） 780（30.7） 95kg/ 209 lb
KPR-H1635
KPR- 2230 300（11.8） 350（13.7） 660（25.9） 45kg/ 99 lb
214
KPR- 2235 350（13.7） 400（15.7） 710（27.9） 40（1.50） 35（1.37） 10（0.39）× 5（0.19） 52kg/ 114 lb
（8.42）
KPR- 2240 400（15.7） 450（17.7） 760（29.9） 68kg/ 149 lb
130（5.11） 50（1.96）
KPR- 2735 350（13.7） 400（15.7） 710（27.9） 77kg/ 169 lb
265 80mT
KPR- 2740 400（15.7） 450（17.7） 760（29.9） 45（1.77） 40（1.50） 12（0.47）× 5（0.19） 86kg/ 189 lb
（10.4） （800G）
KPR- 2745 450（17.7） 500（19.6） 810（31.8） min. 100kg/ 220 lb

MATERIALS INSTRUMENTS TOOLS

KPR- 3240 400（15.7） 450（17.7） 780（30.7） 14（0.55）×5.5（0.21） 110kg/ 242 lb
50（1.96） 45（1.77）
KPR- 3245 450（17.7） 315 500（19.6） 830（32.6） 122kg/ 368 lb
135（5.31）
KPR- 3250 500（19.6）（13.7） 550（21.6） 880（34.6） 60（2.36） 135kg/ 297 lb
60（2.36） 55（2.16）
KPR- 3260 600（23.6） 650（25.5） 980（38.5） 140kg/ 308 lb
KPR- 3540C 400（15.7） 450（17.7） 790（31.1） 190kg/ 418 lb
MAGNETIC MEASURING

KPR- 3545C 450（17.7） 350 500（19.6） 850（33.4） 210kg/ 462 lb

KPR-3560C 55（2.16） 50（1.96） 140（5.51）
KPR- 3550C 500（19.6）（13.7） 550（21.6） 900（35.4） 16（0.62）× 6（0.23） 230kg/ 507 lb
70（2.75）
KPR- 3560C 600（23.6） 650（25.5） 1000（39.4） 260kg/ 573 lb
KPR- 4045C 450（17.7） 500（19.6） 860（33.8） 270kg/ 595 lb
KPR- 4050C 500（19.6） 400 550（21.6） 920（36.2） 145（5.70） 300kg/ 661 lb
60（2.36） 55（2.16）
KPR- 4060C 600（23.6）（15.7） 650（25.5） 1020（40.1） 80（3.14） 355kg/ 782 lb
KPR-2235
KPR- 4075C 750（29.5） 820（32.2） 1200（47.2） 450kg/ 992 lb
KPR- 5060C 600（23.6） 650（25.5） 1040（40.9） 300mT 480kg/1058 lb
500 150（5.90） 90（3.54）
KPR- 5075C 750（29.5） 820（32.2） 1210（47.6） 70（2.75） 65（2.55） 18（0.70）× 7（0.27） （3000G） 630kg/1388 lb
（19.6）
KPR- 5090C 900（35.4） 1000（39.4） 1400（55.1） min. 750kg/1653 lb
φD

φd 2 100（3.93）
KPR- 6075C 750（29.5） 820（32.2） 1300（51.1） 75（2.95） 70（2.75） 900kg/1984 lb
φd 1 φd 1 190（7.48） 20（0.78）×7.5（0.29）
KPR- 6090C 900（35.4） 600 1000（39.4） 1500（59.0） 80（3.14） 75（2.95） 1070kg/2358 lb
KPR-60105C 1050（41.3）（23.6） 1150（45.2） 1670（65.7） 120（4.72） 1230kg/2711 lb
Keyway KPR-60120C 1200（47.2） 1300（51.1） 1820（71.6）
90（3.54）
85（3.34） 1450kg/3196 lb
200（7.87）
KPR- 7575C 750（29.5） 820（32.2） 1370（53.9） 95（3.74） 25（0.98）× 9（0.35） 1200kg/2645 lb
150（5.90）
L1 B L1 L2 KPR-75105C 1050（41.3） 750 1150（45.2） 1700（66.9） 100（3.93） 90（3.54） 1650kg/3637 lb
KPR-75120C 1200（47.2）（29.5） 1300（51.1） 1950（76.7） 110（4.33） 95（3.74） 1900kg/4188 lb
L 250（9.84） 200（7.87）
KPR-75140C 1400（55.1） 1500（59.0） 2150（84.6） 120（4.72） 100（3.93） 28（1.10）×10（0.39） 2150kg/4739 lb

138
 MAGNETIC SEPARATORS
Model KHDS HIGH-SPEED DRUM TYPE MAGNETIC SEPARATOR
These are high-performance magnetic separators designed
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

An example of KHDS fabrication to easily separate and collect magnetized fine powder and
fine particles that are difficult to separate with other dry
type magnetic separators.
The effect of the magnetic force created by a unique pole
layout together with adjustment of the centrifugal force by
varying the rotation enables collection and separation of
MAGNET
LIFTING

magnetized substances without taking in impurities.

［Application］
Suitable for separation of mine smalls, sorting of weak
magnetic ores and separation of iron from aluminum,
copper and brass chips. In addition, these separators are
MAGBORE*

also useful for separation of dust, waste sand, casting

Gasification melting furnaces
KHDS-30 sand and shots.
and slug processing
［Features］
Bayer cyclo variable speed changer ●The unique pole construction enables separation
3-phase 200 V
without taking in impurities.
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

●The drum speed can be varied according to substances

D to separate, which enables these separators to be used
under various conditions of separation.
●A type for slug is also available.
H

Feed port
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

L 4×4‒18 drill B1
Inspection window
Magnetic
Nonmagnetic substances discharge port Outer case
substances
DEMAGNETIZER FOR CONVEYANCE

rotary drum Magnet

discharge port Intermediates discharge port

■Relation between amount to process and

substances to process
In general, the processing amount varies depending on the specific
Magnetic Intermediates Nonmagnetic
gravity of substances to process and such processing conditions as substances discharge substances
the grain size, magnetized state, water content, etc. discharge port port discharge port
［mm
（in）
］
Processing Dimensions Drum
■Amount to process by KHDS-30 <Example> Model
Capacity ₁ φ
Mass
SEPARATORS SEPARATORS

Grain Size, etc. Processing Amount KHDS-15 2.2‒12.0t/h 900（35.4） 150

（5.90） 1800kg/3968 lb
KHDS-30 4.5‒24.0t/h 1000（39.4） 300
（11.8） 2200kg/4850 lb
Grain size 15 – 6 mm 15‒7（t/h）
KHDS-45 6.7‒36.0t/h 1150（45.2） 1470 1500 930 450
（17.7） 2600kg/5732 lb
Grain size 6 – 2 mm 7‒5（t/h） KHDS-60 9.0‒48.0t/h 1300（51.1） （57.8） （59.0） （36.6） 600
（23.6） 3300kg/7275 lb

Grain size less than 2 mm 5‒1（t/h） KHDS-75 11.0‒60.0t/h 1500（59.0） 750

（29.5） 3600kg/7937 lb
KHDS-90 13.0‒72.0t/h 1700（66.9） 900
（35.4） 4000kg/8818 lb
POWERFUL MAGNETIC MEASURING MEASURING

Separation of iron wastes from nonferrous metallic chips 1‒2（t/h）

※The power source is 3-phase, 200 VAC.

Model KIF ELECTROMAGNETIC FILTER

［Application］
TOOLS

These filters work well in removing fine iron powder from pigments, glass materials, foods,
chemicals and other various kinds of powder materials.
L 220 B

Open/close plate Mixed materials

INSTRUMENTS MATERIALS

Operation/control panel

Electromagnet Screen
H
MAGNETIC

Changeover plate
Cylinder
Magnetic Nonmagnetic Vibrator
Magnetic Nonmagnetic
substances substances substances
discharge port discharge port substances
discharge port discharge port
［mm
（in）
］
Processing Dimensions
Model Electromagnet Mass
Capacity
KIF-16 1.0m³/h 800
（31.5） 800
（31.5） 1300
（51.1） 0.8kW 540kg/1190 lb
KIF-20 1.5m³/h 1100
（43.3） 1000
（39.4） 1550
（61.0） 1.0kW 1000kg/2205 lb

KIF-30 KIF-30 3.5m³/h 1200

（47.2） 1100
（43.3） 1850
（72.8） 1.5kW 1500kg/3307 lb

139 ※Accessory: DC control unit (Input 3-phase 200 VAC)

 KHDS / KIF / KID-R / KID
■The high magnetic force separators are designed to generate a magnetic force as large as 2.6 T
(26000 G) for separation of weak magnetic substances. In addition to the“induction roll type

MAGNETIC TOOLS & EQUIPMENT

KID-R”and“cross belt type KID-B”that have a large processing capacity, a relatively smaller

FOR WELDING OPERATION

capacity“induction type KID”and“electromagnetic filter KIF”are also available.

Model KID-R INDUCTION TYPE POWERFUL MAGNETIC SEPARATOR

MAGNET
LIFTING
［Application］
These separators are suitable for separation of weak magnetic substances that exist in powder and
granular materials of quartz sand (glass material), high grade casting sand and chromite sand. In addition,
these separators are used to remove iron ores from such nonferrous minerals as tungsten, manganese ore,
titanium ore, monazite, garnet and ilmenite, to remove weak magnetic oxides from casting sand (quartz

MAGBORE*
sand) and to separate weak magnetic substances from other powder and granular materials.
［Features］
●The induction roller generates 2.6 T (Tesla) max. at a sharp gradient and high magnetic flux density.
●The magnetic force can easily be adjusted according to magnetic substances in raw materials.
●The roller revolution can be varied steplessly. According to properties of raw materials, the influence of the

CONVEYANCE EQUIPMENT
centrifugal force by the roller can be adjusted for optimum separation. (Optional)
●When the 2-stage or 3-stage type is used, highly efficient separation is possible.

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

●These separators are of dry type that does not need auxiliary equipment for pre- and post-treatment.
●These separators are designed to contain dust to prevent pollution by dust.

Processing conditions

DEMAGNETIZER EQUIPMENT
Optimum substances to process are materials that are dry and flow freely and their grain size is 8 to 150 mesh.

Capacity
The amount to process is about 200 kg/h to 1000 kg/h per induction roller width 100 mm, though it varies according to
KID-R90-3 kinds and grain sizes of substances to separate and required level of separation.

One-stage or 2-stage according to applications

Because a high magnetic force is required, the magnetomotive force is induced by the roller by use of a yoke so that
①
weak magnetic substances can be separated from flowing raw materials. The figure shows the 3-stage type. One-
stage, 2-stage and 3-stage are determined by the number of induction rollers.
②
［mm
（in）
］
③
Induction Processing Dimensions Power Consumption

SEPARATORS FOR CONVEYANCE

Model Mass
Roller Capacity Length Width Height Electromagnet Drive motor Feeder motor
KID-R35-1 1-stage
④ 1650 1000 2300 2.5‒3.0 ton
KID-R35-2 2-stage 2.4m³/h 1.5kW 3.7kW 250VA
（64.9） （39.4） （90.5） 5512‒6614 lb
KID-R35-3 3-stage
<3-stage> ⑦
KID-R60-1 1-stage
① Hopper ⑥ 2300 7.0‒7.5 ton
KID-R60-2 2-stage 4.0m³/h 5.5kW 7.5kW

MEASURING POWERFUL MAGNETIC MAGNETIC

② Magnetic pole for （90.5） 15430‒16530 lb
⑤ 3-stage
rough separation KID-R60-3 1700 2500
750VA
③ Branch plate KID-R90-1 1-stage （66.9） （98.4）
④ High magnetic force pole ④ KID-R90-2 2-stage 6.0m³/h
2600
10.0kW 11.0kW
9.0‒10.0ton
⑤ Coil （102.4） 19840‒22050 lb
KID-R90-3 3-stage
⑥ Yoke
⑦ Induction magnetic roller ※These are magnetic separators designed specially for weak magnetic substances. If strong magnetic substances are mixed, they need to
be removed at the preceding stage.

SEPARATORS
Model KID INDUCTION TYPE MAGNETIC SEPARATOR
Hopper Motor
Suitable for removing weak magnetic
substances from glass raw materials, Induction roll

MATERIALS INSTRUMENTS TOOLS

ceramic raw materials and chemical Coil
products. In particular, these separators
work best with fine particles smaller than
1 mm. Weak magnetic substances in
MAGNETIC MEASURING

granular materials are separated by a

strong magnetic force.

Magnetic substances Magnetic substances

Nonmagnetic
substances
［mm
（in）
］
Processing Dimensions
Model Motor Electromagnet Mass Substance to Separate
Capacity Width Depth Height
Sand & powder smaller
KID-250 0.15m³/h 665
（26.1） 350
（13.7） 750
（29.5） 0.2 kW 0.2kW 300kg/ 661 lb
than 1mm（0.03）

Sand & powder smaller

KID-1TM 1.0 m³/h 650
（25.5） 1300
（51.1） 0.4 kW 0.6kW 900kg/1984 lb
than 3mm（0.11）
（31.8）
810
KID-1TM Sand & powder smaller
KID-3TM 3.0 m³/h 850
（33.4） 1500
（59.0） 0.75kW 1.2kW 1700kg/3748 lb
than 3mm（0.11）

140
 MAGNETIC SEPARATORS
Model KID-B CROSS BELT TYPE POWERFUL MAGNETIC SEPARATOR
［Application］
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

Suitable for separating weak magnetic substances from powder and granular
materials such as glass raw materials, casting sand and ceramic raw materials at a
high collection rate.
This model works well with dry materials of grain size 3 mm or less and the optimum
grain size is about 20 mesh.
［Features］
MAGNET
LIFTING

●High magnetic force and sharp gradient for effective separation of weak magnetic
KID-B
substances from granular materials.
●The conveyor belt speed can be varied steplessly for efficient separation at an
optimum speed.
●The mechanism that attracts magnetic substances in raw materials by a magnetic
MAGBORE*

pole above the conveyor and then discharges them ensures a high collection rate.
In particular, high-grade collection of useful magnetic substance is possible.
●By increasing the number of magnetic poles above the conveyor belt to make a
multistage construction, separation can be carried out according to the magnetic
properties of magnetic substances.
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

●Can be installed easily in existing lines.

① ④
■Examples of separation
② Removal of iron oxide from lime stone (desiccating agent)
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

③
Feeding
Removal rate 99.5%
① Coil Magnet
② Upper magnetic pole
Collection of biotite (weak magnetic substance) from feldspar
substan
③ Conveyor belt
④ Discharge belt Collection rate 95% or over
Nonmagnetic substances
DEMAGNETIZER FOR CONVEYANCE

Examples of fabrication of various recycling magnetic separators

An example of fabrication of drum

type magnetic separator
SEPARATORS SEPARATORS

Nonferrous metal separator

POWERFUL MAGNETIC MEASURING MEASURING

An example of fabrication of suspended

permanent magnetic separator
TOOLS

An example of fabrication of
large electromagnetic drum
INSTRUMENTS MATERIALS

An example of fabrication of high-

An example of fabrication of high-magnetic speed drum type magnetic separator
force drum type magnetic separator
An example of fabrication of drum
type magnetic separator
MAGNETIC

An example of fabrication of 2-stage

drum type magnetic separator

141
 KID-B / KPM
Model KPM PLATE MAGNET
［Application］

MAGNETIC TOOLS & EQUIPMENT

ion
unct

FOR WELDING OPERATION

Ff These magnets are installed on chutes and hoppers
N/OF
No O to attract and separate magnetic substances such as
iron powder from raw materials in chemical, drug and
other fine particle industries.
［Features］
●Strong attractive force. Compact and robust.

MAGNET
LIFTING
ion ●Easy installation in any place as no power source
unct
N/O FF f is required.
No O ※Magnets with a grip and hinge are available
KPMF-1540A optionally upon request.

MAGBORE*
TO machine

From machine KPMT-1530 Model KPMF

CONVEYANCE EQUIPMENT
Oil 20 20 ●The whole surface is made of
Precautions for use L H
12 stainless steel (SUS304).
To use these magnets in liquids (e.g. h
●Large attractive force over a long

20

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

water) other than oil, please specify
distance.
“enclosed type.”
●The flange area can be worked on.

B
※A type having a flange in a

20
different position is also available.
Plate magnet
Model KPMT

DEMAGNETIZER EQUIPMENT
Separated fine iron particlesstopped ●An iron magnetic plate mounted
20 20
against the flow of materials. Plate magnet L H on the attractive face of Model
h KPMF.

20
●The holding power is applied to
An example of
the attracted iron pieces by the
iron-removing magne

B
Plate magnet magnetic plate so that they will
fine particle chute lin
not be pushed forward by

20
Plate magnet materials that follow.

Standard models

SEPARATORS FOR CONVEYANCE

■Flat type ［mm
（in）
］ ■With magnetic plate ［mm
（in）
］
Dimensions Attraction Capacity (Distance) Dimensions Attraction Capacity (Distance)
Model 15-cm M10 M10×25 Mass Model 15-cm M10 M10×25 Mass
nail nut bolt nail nut bolt
KPMF-1515A 150
（5.90） 6kg/ 13.2 lb KPMT-1515 150
（5.90） 7kg/ 15.0 lb

MEASURING POWERFUL MAGNETIC MAGNETIC

KPMF-1530A 300
（11.8） 11kg/ 24.2 lb KPMT-1530 300
（11.8） 12kg/ 26.4 lb
150 43.5 3.2 80‒100 40‒ 60 60‒ 80
KPMF-1535A 350
（13.7） 13kg/ 28.6 lb KPMT-1540 400
（15.7） 16kg/ 35.2 lb
（5.90） （1.71）（0.12）（3.15‒3.93）（1.57‒2.36）（2.36‒3.15）
150 42.2 3.2 80‒100 40‒ 60 60‒ 80
KPMF-1540A 400
（15.7） 15kg/ 33.0 lb KPMT-1550 500
（19.6） 20kg/ 44.0 lb
（5.90） （1.66）（0.12）（3.15‒3.93）（1.57‒2.36）（2.36‒3.15）
KPMF-1545A 450
（17.7） 17kg/ 37.4 lb KPMT-1560 600
（23.6） 24kg/ 52.9 lb
KPMF-1550A 500
（19.6） 18kg/ 39.6 lb KPMT-2020 200
（7.87） 14kg/ 30.8 lb
KPMF-1560A 600
（23.6） 22kg/ 48.5 lb KPMT-2030 300
（11.8） 21kg/ 46.3 lb
200 100‒130 60‒ 80 80‒100
200
（7.87） 13kg/ 28.6 lb 400
（15.7） 29kg/ 63.9 lb

SEPARATORS
KPMF-2020A KPMT-2040
（7.87） （3.93‒5.11）（2.36‒3.15）（3.15‒3.93）
KPMF-2030A 300
（11.8） 20kg/ 44.0 lb KPMT-2050 500
（19.6） 35kg/ 77.1 lb
KPMF-2040A 200 400 （15.7） 100‒130 60‒ 80 80‒100 27kg/ 59.5 lb KPMT-2060 600
（23.6） 56.5 3.5 42kg/ 92.5 lb
KPMF-2050A （7.87） 500（19.6） （3.93‒5.11）（2.36‒3.15）（3.15‒3.93） 33kg/ 72.7 lb KPMT-3030 （11.8）（2.22）（0.13）
300 32kg/ 70.5 lb
KPMF-2060A 600
（23.6） 40kg/ 88.1 lb KPMT-3040 400
（15.7） 42kg/ 92.5 lb
55.5 3.5 300 120‒160 70‒100 100‒120
KPMF-2080A 800
（31.5） 54kg/119.0 lb KPMT-3050 500
（19.6） 53kg/116.8 lb
（2.18）（0.13） （11.8） （4.72‒6.29）（2.75‒3.93）（3.93‒4.72）

MATERIALS INSTRUMENTS TOOLS

KPMF-3030A 300
（11.8） 29kg/ 63.9 lb KPMT-3060 600
（23.6） 63kg/138.9 lb
KPMF-3040A 400
（15.7） 39kg/ 85.9 lb KPMT-3080 800
（31.5） 84kg/185.2 lb
300 120‒160 70‒100 100‒120
KPMF-3050A 500
（19.6） 49kg/108.0 lb ※Surface magnetic flux density 250 mT (2500 G) max.
（11.8） （4.72‒6.29）（2.75‒3.93）（3.93‒4.72）
KPMF-3060A 600
（23.6） 59kg/130.1 lb
KPMF-3080A 800
（31.5） 79kg/174.2 lb
MAGNETIC MEASURING

※Surface magnetic flux density 130 mT (1300 G) max.

Powerful models Powerful plate magnets using rare earth magnet

■Flat type ［mm
（in）
］ ■With magnetic plate ［mm
（in）
］
Dimensions Attraction Capacity (Distance) Dimensions Attraction Capacity (Distance)
Model 15-cm M10 M10×25 Mass Model 15-cm M10 M10×25 Mass
nail nut bolt nail nut bolt
KPMF-H1510 100
（3.93） 3.0kg/6.61 lb KPMT-H1510 100
（3.93） 4.0kg/8.80 lb
KPMF-H1515 150 150（5.90） 100‒130 60‒ 80 80‒100 4.5kg/9.92 lb KPMT-H1515 150 150（5.90） 100‒130 60‒ 80 80‒100 6.0kg/13.2 lb
KPMF-H1520 （5.90） 200（7.87） （3.93‒5.11）（2.36‒3.15）（3.15‒3.93） 5.5kg/12.1 lb KPMT-H1520 （5.90） 200（7.87） （3.93‒5.11）（2.36‒3.15）（3.15‒3.93） 8.0kg/17.6 lb

KPMF-H1530 300
（11.8） 25 3.2 8.5kg/18.0 lb KPMT-H1530 300
（11.8） 25 3.2 12.0kg/26.4 lb
KPMF-H2020 （7.87）（0.98）（0.12）
200 8.0kg/17.6 lb KPMT-H2020 （7.87）（0.98）（0.12）
200 10.0kg/22.0 lb
KPMF-H2025 200 250（9.84） 120‒160 70‒100 100‒120 10.0kg/22.0 lb KPMT-H2025 200 250（9.84） 120‒160 70‒100 100‒120 12.5kg/27.5 lb
KPMF-H2030 （7.87） 300（11.8） （4.72‒6.29）（2.75‒3.93）（3.93‒4.72）11.5kg/25.0 lb KPMT-H2030 （7.87） 300（11.8） （4.72‒6.29）（2.75‒3.93）（3.93‒4.72） 15.0kg/33.0 lb

KPMF-H2040 400
（15.7） 15.5kg/34.1 lb KPMT-H2040 400
（15.7） 20.0kg/44.0 lb

142
※Surface magnetic flux density 300 mT (3000 G) max. ※Surface magnetic flux density 500 mT (5000 G) max.
 MAGNETIC SEPARATORS
Model KPMF-C PLATE MAGNET WITH IRON POWDER REMOVAL COVER
［Application］
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

tion These magnets are installed on chutes and hoppers to

n func
irectio
F
N/OF attract/collect magnetic substances.
Slide d No O
［Features］
●Attracted magnetic substances can be released and
cleaned off very easily by pulling out the iron-removal
cover.
MAGNET
LIFTING

KPMF-C1530
L2
L1 4−φ9 5.2
L
［mm
（in）
］
MAGBORE*

Dimensions
Model Mass N

150
176
200

173

220
KPMF-C1530 300
（11.8） 310
（12.2） 330
（12.9） 303
（11.9） Approx. 12.5kg/27.5 lb
S
KPMF-C1535 350
（13.7） 360
（14.1） 380
（14.9） 353
（13.9） Approx. 14.5kg/31.9 lb
KPMF-C1540 400
（15.7） 410
（16.1） 430
（16.9） 403
（15.8） Approx. 16.5kg/36.3 lb
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

KPMF-C1545 450
（17.7） 460
（18.1） 480
（18.9） 453
（17.8） Approx. 19 kg/41.8 lb 40 L3 （44.2）
25
KPMF-C1550 500
（19.6） 510
（20.0） 530
（20.8） 503
（19.8） Approx. 21 kg/46.3 lb

※Surface max. magnetic flux density … Magnet surface: 130 mT (1300 G) Cover surface: 100 mT (1000 G) （71）

Model KPM SUSPENDED PLATE MAGNET

ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

ion ［Application］
unct
N/O FF f These permanent magnets are suspended above a chute or
No O conveyor belt to attract and separate magnetic substances such
as small iron pieces and particles from raw materials in
chemical, drug and other fine particle industries.
DEMAGNETIZER FOR CONVEYANCE

［Features］
n ●Powerful attractive force. Compact and robust.
nctio ●As a permanent magnet is used, no power source is required
/OF F fu
No ON and these magnets can be used in any place.
●Very easy installation.

KPMD-2550
Precautions for use
To use these magnets in liquids (e.g. water) other than oil,
please specify“enclosed type.”
SEPARATORS SEPARATORS

Model KPMD
KPMJ-4040 L（Allowable
belt width） H

Removing iron in
Environmentally
POWERFUL MAGNETIC MEASURING MEASURING

friendly wood-processing
Attractive
plants for biomass face
B
b

power generation
also!

■Model KPMD ［mm

（in）
］
<Suspended permanent magnet>
TOOLS

●Suspended above a chute of a conveyor

Dimensions Attraction Capacity (Distance) belt to attract and remove iron pieces.
Model 15-cm M10 M10×25 Mass ●Larger attraction distance than KPMF.
nail nut bolt ●Stainless steel (SUS304) surface.
KPMD-2525 250
（9.84） 170
（6.69） 22kg/ 48.5 lb ●Eyebolts in four places. (M8 eyebolts on
KPMD-2530 300
（11.8） 220
（8.66） 27kg/ 59.5 lb KPMD-25** and M10 eyebolts on KPMD-35**)
INSTRUMENTS MATERIALS

250 170 64 130‒170 60‒ 90 100‒130

KPMD-2540 400
（15.7） 320
（12.6） 35kg/ 77.1 lb
（9.84） （6.69） （2.52） （5.11‒6.69） （2.36‒3.54） （3.93‒5.11）
KPMD-2550 500
（19.6） 420
（16.5） 44kg/ 97.0 lb Model KPMJ
KPMD-2560 600
（23.6） 520
（20.4） 54kg/119.0 lb
L（Allowable
KPMD-3530 300
（11.8） 220
（8.66） 49kg/108.0 lb belt width） H
KPMD-3540 350 400
（15.7） 270 320
（12.6） 82 160‒200 80‒120 110‒140 64kg/141.1 lb
KPMD-3550 （13.7） 500
（19.6） （10.6） （16.5） （3.22） （6.29‒7.87） （3.15‒4.72） （4.33‒5.51）
420 80kg/176.4 lb
MAGNETIC

KPMD-3560 600
（23.6） 520
（20.4） 100kg/220.5 lb Attractive
face
■Model KPMJ
b

KPMJ-3030 300
（11.8） 200
（7.87） 82kg/180.7 lb
180‒250 120‒160
KPMJ-3040 （11.8） 400
300 （15.7） 200
（7.87） 260
（10.2） 159（6.25） 112kg/246.9 lb <Suspended permanent magnet>
（7.08‒9.84） （4.72‒6.29）
KPMJ-3050 500
（19.6） 360
（14.1） 100‒130 150kg/330.6 lb ●Suspended above a chute of a conveyor
400
（15.7） 250
（9.84） （3.93‒5.11） 90kg/198.4 lb
KPMJ-4040A belt to attract and remove iron pieces.
300‒400 150‒200
KPMJ-4060A 400
（15.7） 600
（23.6） 250
（9.84） 380
（14.9） 124（4.87）
（11.8‒15.7） （5.90‒7.87）
140kg/308.7 lb ●More powerful than KPMD.
KPMJ-4080A 800
（31.5） 500
（19.6） 185kg/407.9 lb ●Stainless steel (SUS304) surface.
KPMJ-5065A 490
（19.2） 650
（25.5） 300
（11.8） 400
（15.7） 129（5.07） 400‒450 130‒140 200‒240 230kg/507.0 lb ●Suspension hinges in four places.
KPMJ-6580A 650
（25.5） 800
（31.5） 400 （23.6） 159（6.25）（15.7‒17.7） （5.11‒5.51） （7.87‒9.44） 400kg/881.8 lb
（15.7） 600 (Diameter = φ20)

143 ※Larger sizes are available. Please contact us.

 KPMF-C / KPM / KPM-BW/ KPM / PF
Model KPM-BW PLATE MAGNET FOR TANK CLEANING
［Application］

MAGNETIC TOOLS & EQUIPMENT

Efficient
Design registered

FOR WELDING OPERATION

Most suitable for collecting sludge in a circulating liquid tank.
［Features］
collection of ●This model is provided with a hinge to allow installation in various

sludge!
places such as a corner in a tank or overflow area of the partition plate.
●By attaching a wire or chain through a hook hole of the hinge, it
becomes easy to take out the magnet from inside a tank.

MAGNET
LIFTING
An example of collecting sludge ●Not only deposited sludge but also floating sludge can be collected.
KPM-BW24 L
2-φ3

（S）
Hook hole

35 （23） 35
KPM-BW18

（N）

MAGBORE*
（93）
ion
unct

60
N/O FF f
No O

（S） （N）
KPM-BW12

Can be 100
9
（4.5）
installed in any ［mm
（in）
］

CONVEYANCE EQUIPMENT
place.
Dimensions (when opened) Surface Max.
Model Face Mass Remarks
Depth Height Magnetic Flux Density

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

KPM-BW12 120
（4.72） 0.75kg/1.65 lb
Working temperature: 60℃ or below.
150 mT (1500 G)
KPM-BW18 180
（7.08） 93
（3.66） 23
（0.90） SUS304 1.1 kg/2.42 lb Usable in liquid. (Except for chemicals
or over
other than neutral medical products)
KPM-BW24 240
（9.44） 1.5 kg/3.30 lb
※If the hinge is removed, the warranty will become void. A string or chain to be passed through the hook hole must be nonmagnetic.

DEMAGNETIZER EQUIPMENT
Model KPM SMALL PLATE MAGNET
Simple type 130
15
tion
120 4-φ4.5
F func
/OF
N o ON

36
52
Holding
power
60N

SEPARATORS FOR CONVEYANCE

KPM-1005
［Application］ Model Type Holding Power Surface Max. Magnetic Flux Density Mass
This model can be used to catch and collect iron pieces as a small KPM-1005 Standard 60N（ 6kgf） Approx. 100mT
（1000G）
Approx. 350g/0.77 lb
plate magnet or can also be used as a large magnetic holder. A KPM-H1005 Powerful 150N
（15kgf） Approx. 200mT
（2000G）
powerful type using a rare earth magnet is also available. ※The holding power is based on a test piece of SS400, 6 mm thick, ground surface held on the whole face.

MEASURING POWERFUL MAGNETIC MAGNETIC

Model PF MAGFIN*
［Application］
nctio
n Can work with highly
/OF F fu viscous solutions. Suitable for removing iron from liquids (cooling liquid, electric
No ON discharge machining liquid, etc.) in tanks and passages and
as an attracting plate for removing iron in granular materials.

SEPARATORS
This can be used both dry and wet.
［Features］
●A magnet block of a construction to cause a strong
magnetic force to be concentrated on the magnetic pole.
Pump Inlet 100

MATERIALS INSTRUMENTS TOOLS

84 206
6 190
S N S
30.5

PF-1A
85.5

MAGNETIC MEASURING

tion
55

func
N/OFF
No O ［mm（in）
］
Model Dimensions Surface Max. Magnetic Flux Density Mass
PF-1A 206
（8.11）
×100
（3.93）
×86
（3.38） 120mT
（1200G） 5.7kg/12.6 lb

<Model PF-F1>
Not allowed in liquid
［Application］
Useful as a small magnet plate to catch and collect iron pieces.
PF-F1
A powerful type using a rare earth magnet is also available.
Conveyor

［mm（in）
］
Model Dimensions Surface Max. Magnetic Flux Density Mass
PF-F1 120
（4.72）
×90
（3.54）
×30
（1.18） 120mT
（1200G） 1.5kg/ 3.3 lb
PF-HF1 122
（4.80）
×90
（3.54）
×26
（1.02） 1.4kg/ 3.1 lb
250mT
（2500G）
Carrying handle PF-HF2 122
（4.80）
×45
（1.77）
×26
（1.02） 0.7kg/ 1.5 lb

144
 MAGNETIC SEPARATORS
Model KGM / KGM-VM MAGNETIC BAR (STANDARD/POWERFUL)
A magnetic bar used in a grid type magnet. This
FOR WELDING OPERATION
MAGNETIC TOOLS & EQUIPMENT

bar is available individually also. A round bar

type having a tapped hole on each end for
mounting. Casing is made of stainless steel.
KGM-25 These bars come in various lengths for use in a
wide range of applications.
MAGNET
LIFTING

Caution:
To use these magnetic bars in liquids
An example of usage in passage
(e.g. water) other than oil, please specify
Standard type “enclosed type.” Powerful type Usable in liquid ［mm
（in）
］
［mm
（in）
］
Surface Max. Magnetic Working Temp. Surface Max. Magnetic Working Temp.
Model Length Diameter Mass Model Length Diameter Mass
Flux Density Upper Limit Flux Density Upper Limit
MAGBORE*

KGM-20 194
（7.63） 0.5 kg/1.10 lb KGM-VM10 95
（3.74） 0.7kg/1.54 lb
KGM-25 244
（9.60） 0.55kg/1.21 lb KGM-VM15 145（5.70） 0.9kg/1.98 lb
KGM-30 295
（11.6） 0.65kg/1.43 lb KGM-VM20 194（7.63） 1.1kg/2.42 lb
KGM-35 343
（13.5） 0.8 kg/1.76 lb KGM-VM25 244（9.60） 1.2kg/2.64 lb
φ25 Approx. 60℃ φ25 Approx. 80℃
KGM-40 393
（15.4） 130mT
（1300G） 0.9 kg/1.98 lb KGM-VM30 295（11.6） 500mT
（5000G） 1.4kg/3.08 lb
（0.98） （140°F） （0.98） （176°F）
CONVEYANCE EQUIPMENT EQUIPMENT
CHIP & SLUDGE

KGM-45 442
（17.4） 1.0 kg/2.20 lb KGM-VM35 343（13.5） 1.6kg/3.52 lb
KGM-50 493
（19.4） 1.1 kg/2.42 lb KGM-VM40 393（15.4） 1.7kg/3.74 lb
KGM-55 543
（21.3） 1.24kg/2.73 lb KGM-VM50 493（19.4） 1.9kg/4.18 lb
KGM-60 592
（23.3） 1.34kg/2.95 lb KGM-VM60 592（23.3） 2.1kg/4.62 lb
※The tapped holes are 2-M5, depth 6. ※Casing material: SUS304 ※The tapped holes are 2-M6, depth 7. ※Casing material: SUS304
ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENT MAGNETIC

Model KGM-H POWERFUL SQUARE MAGNETIC BAR

How to use
Set a square magnetic bar with its corner in the
flow direction of materials as shown.
DEMAGNETIZER FOR CONVEYANCE

Not allowed in liquid

※The corner marked by“UP”
must be up.

KGM-H20
［mm
（in）
］
Side Length Surface Max. Magnetic Working Temp.
Model Length Mass
□ Flux Density Upper Limit
KGM-H20 195
（7.67） 0.6 kg/1.32 lb
KGM-H25 245
（9.64） 0.75kg/1.65 lb
22 Approx. 60℃
SEPARATORS SEPARATORS

KGM-H30 295
（11.6） 320mT
（3200G） 0.9 kg/1.98 lb
A magnetic bar used in a powerful grid type （0.86） （140°F）
KGM-H35 345
（13.5） 1.1 kg/2.42 lb
magnet. This bar is available individually
KGM-H40 395
（15.5） 1.2 kg/2.64 lb
also. Casing is made of stainless steel.
※The tapped holes are 2-M5, depth 6. ※Casing material: SUS304

Model KGM-T HEAT-RESISTANT MAGNETIC BAR

POWERFUL MAGNETIC MEASURING MEASURING

［mm
（in）
］
These magnetic bars are heat
resistant and capable of maintaining Surface Max. Magnetic Working Temp.
Model Length Diameter Mass
Flux Density Upper Limit
the magnetic force and functioning at
KGM-T20 194
（7.63） 0.5 kg/1.10 lb
certain high temperature. φ25 Approx. 150℃
KGM-T25 244
（9.60） 130mT
（1300G） 0.55kg/1.21 lb
TOOLS

（0.98） （302°F）
KGM-T30 295
（11.6） 0.65kg/1.43 lb
※The tapped holes are 2-M5, depth 6. ※Casing material: SUS304

Note: To use these magnetic bars in liquids (e.g. water) other than oil, please specify enclosed type.
INSTRUMENTS MATERIALS

Model KGM-S MAGNETIC BAR WITH STAND

［Application］
This magnetic bar is equipped with a Electric
stand which permits it to be placed in discharge
MAGNETIC

a tank to remove iron in liquid. We machine

recommend that the bar be packed in a
polyethylene or vinyl bag beforehand
for convenience of removal of iron
sticking to the bar. Liquid tank

KGM-S20
［mm
（in）
］
Magnetic Bar Stand
Model Mass
Length Dia. Surface Max. Magnetic Flux Density Height Depth Width
KGM-S20 194
（7.63） φ25
（0.98） 130mT
（1300G） 54（2.12） 60
（2.36） 170
（6.69）約0.6kg/1.32 lb

145 ※outer material：SUS304

KGM / KGM-VM / KGM-H / KGM-T / KGM-S / KGM / KGM-H / KGM-C / KGM-HC
Model KGM RECTANGULAR GRID TYPE MAGNETIC BAR UNIT
［Application］

MAGNETIC TOOLS & EQUIPMENT

FOR WELDING OPERATION
A unit consisting of powerful permanent magnets. These units are indispensable for
removal of iron from granular materials in the fine particle and chemical industries to
enhance the work efficiency.
［Features］
●The grid layout ensures the very high iron removal performance.
●Easy installation for a wide range of applications.

MAGNET
LIFTING
●The two-stage model having a higher iron removal capacity is also available. ［mm（in）］
Surface Max. Processing No. of Dimensions
Model Type Mass
Magnetic Flux Density Capacity Magnets
KGM-2020 1-stage 4 3.5kg/ 7.7 lb
6m³/h 200
（7.87）

MAGBORE*
KGM-2020W 2-stage 7 200 6.0kg/13.2 lb
KGM-2025 KGM-2025 1-stage 4 （7.87） 4.2kg/ 9.2 lb
8m³/h （9.84）
250
KGM-2025W 2-stage 7 6.5kg/14.3 lb
KGM-2525 1-stage 5 5.0kg/11.0 lb
Separating 10m³/h 250
（9.84）

50
KGM-2525W 2-stage 9 250 8.4kg/18.5 lb
grids
B KGM-2530 1-stage 5 （9.84） 5.6kg/12.3 lb

CONVEYANCE EQUIPMENT
25 50 12m³/h （11.8）
300
KGM-2530W 2-stage 130 mT 9 9.5kg/21.0 lb
1-stage (1300 G)
KGM-3030 1-stage 6 6.7kg/14.7 lb
14m³/h 300
（11.8）

MAGNETIC EQUIPMENT MAGNETIZER AND ENVIRONMENTAL CHIP & SLUDGE

KGM-3030W 2-stage 11 300 11.2kg/24.6 lb
1-stage 6 （11.8） 9.0kg/19.8 lb
L KGM-3040
18m³/h （15.7）
400
100

KGM-3040W 2-stage 11 15.7kg/34.6 lb

Magnet
Iron attraction KGM-4040 1-stage 8 11.0kg/24.2 lb
24m³/h 400
（15.7）
KGM-4040W 2-stage 15 400 19.8kg/43.6 lb
2-stage
（15.7）

DEMAGNETIZER EQUIPMENT
KGM-4050 1-stage 8 13.1kg/28.8 lb
30m³/h （19.6）
500
KGM-4050W 2-stage 15 23.6kg/52.0 lb
A powerful type of 500 mT (5000 G) is also available.
※Casing material: SUS304

Model KGM-H POWERFUL RECTANGULAR GRID TYPE MAGNETIC BAR UNIT

Separating B ［Application］
grids Suitable for removing iron from granular materials by a
strong magnetic force. The two-stage model having a higher
iron-removal capacity is also available.
L

SEPARATORS FOR CONVEYANCE

100
Iron attraction

50
Magnet 1-stage
25 50 2-stage ［mm
（in）
］
Surface Max. Magnetic Processing No. of Dimensions
Model Type Mass

MEASURING POWERFUL MAGNETIC MAGNETIC

Flux Density Capacity Magnets
KGM-H2020 1-stage 4 200 3.5kg/ 7.72 lb
4.5m³/h
KGM-H2020W 2-stage 7 （7.87） 6.5kg/14.33 lb
200
320 mT (3200 G)
1-stage 4 （7.87）
KGM-H2025 250 4.5kg/ 9.92 lb
6.0m³/h
KGM-H2025W 2-stage 7 （9.84） 8.0kg/17.67 lb
KGM-H2025
※Casing material: SUS304

SEPARATORS
Model KGM-C ROUND GRID TYPE MAGNETIC BAR UNIT
［Application］
A round type that can easily be installed at the feeding port of machines and hoppers or
chutes as a gate for iron removal.
［mm
（in）
］

MATERIALS INSTRUMENTS TOOLS

Surface Max. Magnetic Processing No. of Dimensions
Model Type Mass
Flux Density Capacity Magnets Frame dia. Height
KGM-C20 Without outer frame （φ200 （2.16）2.1kg/4.63 lb
55
4.5m³/h 4
KGM-CF20 With outer frame （7.87）
） 60
（2.36）2.3kg/5.07 lb
130 mT
MAGNETIC MEASURING

Without outer frame (1300 G)

KGM-C25 （φ250 55（2.16）3.3kg/7.27 lb
KGM-CF25（With outer frame） KGM-C25（Without outer frame） 7.0m³/h 5
（9.84）
） 60
KGM-CF25 With outer frame （2.36）3.6kg/7.90 lb
A powerful type of 500 mT (5000 G) is also available. ※Casing material: SUS304

Model KGM-HC POWERFUL ROUND GRID TYPE MAGNETIC BAR UNIT

A round type combined with powerful magnetic bars that can easily be set on hoppers and
chutes.
［mm
（in）
］
Surface Max. Magnetic Processing No. of Dimensions
Model Type Mass
Flux Density Capacity Magnets Frame dia. Height
KGM-HC20 Without outer frame （φ200 1.6kg/3.52 lb
4.5m³/h 3
KGM-HCF20 With outer frame （7.87）
） 2.0kg/4.41 lb
320 mT 60
KGM-HC25 Without outer frame (3200 G) （2.36） 2.0kg/4.41 lb
（φ250
7.0m³/h 4
KGM-HCF25 With outer frame （9.84）
） 2.4kg/5.29 lb
KGM-HCF20（With outer frame） KGM-HC20（Without outer frame） ※Casing material: SUS304
146