Project Name/Number :

Use menu item Settings > Printing & Title Block Title EX-03: Page : 1
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.
Criteria
Retained Height = 10.50 ft
Wall height above soil = 0.00 ft
Slope Behind Wall = 0.00
Height of Soil over Toe = 12.00 in
Water height over heel = 0.0 ft

Load Factors
Building Code IBC 2018,ACI
Dead Load 1.400
Live Load 1.700
Earth, H 1.700
Wind, W 1.300
Seismic, E 1.000

Soil Data and Lateral Earth Pressure

Allow Soil Bearing = 3,000.0 psf Soil Density, Heel = 110.00 pcf
Equivalent Fluid Pressure Method Soil Density, Toe = 0.00 pcf
Active Heel Pressure = 30.0 psf/ft Footing||Soil Friction = 0.400
Soil height to ignore
= for passive pressure = 12.00 in
Passive Pressure = 300.0 psf/ft

Surcharge Loads
Surcharge Over Heel = 200.0 psf Surcharge Over Toe = 0.0 psf
Used To Resist Sliding & Overturning NOT Used for Sliding & Overturning

Axial Load Applied to Stem

Axial Dead Load = 200.0 lbs Axial Load Eccentricity = 7.0 in
Axial Live Load = 300.0 lbs

Lateral Load Applied to Stem

Lateral Load = 0.0 #/ft
...Height to Top = 0.00 ft
...Height to Bottom = 0.00 ft
Load Type = Wind (W)
(Service Level)
Wind on Exposed Stem

Wind on Exposed Stem = 0.0 psf

(Service Level)
Wind acts left-to-right toward retention side.
Adjacent Footing Load
Adjacent Footing Load = 0.0 lbs Footing Type Line Load
Footing Width = 0.00 ft Base Above/Below Soil
Eccentricity = 0.00 in at Back of Wall = 0.0 ft
Wall to Ftg CL Dist = 0.00 ft Poisson's Ratio = 0.300
 Project Name/Number :
Use menu item Settings > Printing & Title Block Title EX-03: Page : 2
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.
Wall Design Summary
Stability Ratios
Overturning = 2.36 OK
Sliding = 1.56 OK
Soil Bearing
Total Bearing Load = 9,364 lbs
...resultant ecc. = 15.62 in

Soil Pressure @ Toe = 3,686 psf NG

Soil Pressure @ Heel = 0 psf OK
Allowable = 3,000 psf
Soil Pressure Exceeds Allowable!

ACI Factored @ Toe = 5,160 psf

ACI Factored @ Heel = 0 psf

Footing Shear @ Toe = 1.9 psi OK

Footing Shear @ Heel = 79.7 psi NG
Allowable = 75.0 psi

Sliding
Resisting Forces Sliding Forces
Vertical Forces Force Lateral Forces Force
Soil Over Heel (above water table, if any) 5,767.3 lbs Heel Active Pressure (above water table, if any) 2,041.7 lbs
Soil Over Heel (below water table, if any) 0.0 Heel Active Pressure (below water table, if any) 0.0
Water Over Heel 0.0 Hydrostatic Force 0.0
Buoyant Force 0.0 * Heel Active Pressure 2,041.7
Sloped Soil Over Heel 0.0 Surcharge over Heel 636.4
Surcharge Over Heel 998.7 Adjacent Footing 0.0
Adjacent Footing Load 0.0 Surcharge Over Toe 0.0
Axial Dead Load on Stem 500.0 Load @ Stem Above Soil 0.0
Axial Live Load on Stem * Omit Added Lateral Load 0.0
Soil Over Toe 0.0 Seismic Load 0.0
Surcharge Over Toe 0.0 Seismic-Self-weight 0.0
Stem Weight(s) 1,050.0 Lateral on Key 0.0
Earth @ Stem Transitions 0.0 Totals = 2,678.0 lbs
Footing Weight 1,048.3
Key Weight 0.0 *Includes water table effect
Vert. Component 0.0
**
Total Vertical Loads 9,064.2 lbs

* Axial live load NOT included in total displayed , or used for overturning
or sliding resistance, but is included for soil pressure calculations.

Sliding Calcs
Lateral Sliding Force = 2,678.0 lbs
less 100% Passive Force = - 554.2 lbs
less 100% Friction Force = - 3,625.7 lbs
Added Force Req'd = 0.0 lbs OK
....for 1.5 Stability = 0.0 lbs OK

Vertical component of active lateral soil pressure IS NOT considered in

the calculation of soil bearing pressures.
 Project Name/Number :
Use menu item Settings > Printing & Title Block Title EX-03: Page : 3
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.
Overturning
Resisting Moments
Resisting Moments Force Distance Moment
Soil Over Heel (above water table, if any) 5,767.3 lbs 3.49 ft 20,147.1ft-#
Soil Over Heel (below water table, if any) 0.0
Water Table 0.0
Soil Over Heel 5,767.3 3.49 20,147.1
Sloped Soil Over Heel 0.0
Surcharge Over Heel 998.7 3.49 3,488.7
Adjacent Footing Load 0.0
Axial Dead Load on Stem 500.0 0.08 16.0
Axial Live Load on Stem * 300.0 0.08 24.0
Soil Over Toe 0.0 0.17
Surcharge Over Toe 0.0
Stem Weight(s) 1,050.0 0.66 696.5
Earth @ Stem Transitions 0.0
Footing Weight 1,048.3 3.00 3,139.5
Key Weight 0.0
Vert. Component 0.0
Total Vertical Loads 9,064.2 lbs
Resisting Moment 27,487.8 ft-#
Eccentricity 15.0 in
* Axial live load NOT included in total displayed, or used for overturning or sliding resistance, but is included for soil pressure calculations.

Overturning
Overturning Moments
Overturning Moments Force Distance Moment
Heel Active Pressure (above water table, if any) 2,041.7 lbs 3.89 ft 7,939.8 ft-#
Heel Active Pressure (below water table, if any) 0.0
Hydrostatic Force 0.0
Buoyant Force 0.0
Surcharge over Heel 636.4 5.83 3,712.1
Adjacent Footing 0.0
Surcharge Over Toe 0.0
Load @ Stem Above Soil 0.0
Added Lateral Load 0.0
Seismic Load 0.0
Seismic-Self-weight 0.0
Totals = 2,678.0 lbs
Overturning Moment 11,651.9 ft-#
 Project Name/Number :
Use menu item Settings > Printing & Title Block Title EX-03: Page : 4
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.
Stem Design Summary
2nd Bottom
Ratio > 1.0 Ratio > 1.0

Design Height Above Ftg ft = 1.50 0.00

Wall Material Above "Ht" = Concrete Concrete

Design Method = LRFD LRFD
Thickness = 8.00 8.00
Rebar Size = # 6 # 6
Rebar Spacing = 18.00 9.00
Rebar Placed at = Edge Edge

Design Data
fb/FB + fa/Fa = 1.493 1.183

Total Force @ Section

Service Level lbs =
Strength Level lbs = 2,900.0 3,785.0

Moment....Actual
Service Level ft-# =
Strength Level ft-# = 10,412.8 15,412.2
Moment.....Allowable ft-# = 6,968.1 13,022.4

Shear.....Actual
Service Level psi =
Strength Level psi = 43.0 56.1
Shear.....Allowable psi = 75.0 75.0
Anet in2 =
Rebar Depth 'd' in = 5.63 5.63

Masonry Data
f'm psi =
Fs psi =
Solid Grouting =
Modular Ratio 'n' =
Wall Weight psf = 100.0 100.0
Short Term Factor =
Equiv. Solid Thick. =
Masonry Block Type = Medium Weight
Masonry Design Method = ASD
Concrete Data
f'c psi = 2,500.0 2,500.0
Fy psi = 60,000.0 60,000.0
 Project Name/Number :
Use menu item Settings > Printing & Title Block Title EX-03: Page : 5
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.

Concrete Stem Rebar Area Details

2nd Stem Vertical Reinforcing Horizontal Reinforcing
As (based on applied moment) : 0.4361 in2/ft
(4/3) * As : 0.5814 in2/ft Min Stem T&S Reinf Area 1.728 in2
200bd/fy : 200(12)(5.625)/60000 : 0.225 in2/ft Min Stem T&S Reinf Area per ft of stem Height : 0.192 in2/ft
0.0018bh : 0.0018(12)(8) : 0.1728 in2/ft Horizontal Reinforcing Options :
============ One layer of : Two layers of :
Required Area : 0.4361 in2/ft #4@ 12.50 in #4@ 25.00 in
Provided Area : 0.2933 in2/ft #5@ 19.38 in #5@ 38.75 in
Maximum Area : 0.762 in2/ft #6@ 27.50 in #6@ 55.00 in
__________________________________________________________________________________
____________________ _____________________________________________________________________
Bottom Stem Vertical Reinforcing Horizontal Reinforcing
As (based on applied moment) : 0.6455 in2/ft
(4/3) * As : 0.8606 in2/ft Min Stem T&S Reinf Area 0.288 in2
200bd/fy : 200(12)(5.625)/60000 : 0.225 in2/ft Min Stem T&S Reinf Area per ft of stem Height : 0.192 in2/ft
0.0018bh : 0.0018(12)(8) : 0.1728 in2/ft Horizontal Reinforcing Options :
============ One layer of : Two layers of :
Required Area : 0.6455 in2/ft #4@ 12.50 in #4@ 25.00 in
Provided Area : 0.5867 in2/ft #5@ 19.38 in #5@ 38.75 in
Maximum Area : 0.762 in2/ft #6@ 27.50 in #6@ 55.00 in
Footing Data
Toe Width = 0.33 ft f'c = 2,500 psi
Heel Width = 5.66 Fy = 60,000 psi
Total Footing Width = 5.99 ft Footing Concrete Density = 150.00 pcf

Footing Thickness = 14.00 in Min. As % = 0.0018

Key Width = 0.00 in Rebar Cover @ Top = 2.00 in
Key Depth = 0.00 in @ Bottom = 3.00 in
Key Distance from Toe = 0.00 ft
 Project Name/Number :
Use menu item Settings > Printing & Title Block Title EX-03: Page : 6
to set these five lines of information Dsgnr: Project Designer... Date: 28 JUN 2018
for your program. Description....
Concrete cantilevered retaining wall

This Wall in File: C:\Users\[Link]\Documents\RetainPro 10 Project Files\[Link]

RetainPro (c) 1987-2019, Build [Link]
License : KW-06059614 Cantilevered Retaining Wall Code: IBC 2018,ACI 318-14,TMS 402-16
License To : WOOD GROUP USA, INC.
Footing Design Results
Toe Heel
Factored Pressure = 5,160 0 psf
Mu' : Upward = 3,299 0 ft-#
Mu' : Downward = 261 27,452 ft-#
Mu: Design = 97 -27,452 ft-#

Actual 1-Way Shear = 1.87 79.68 psi

Allow 1-Way Shear = 75.00 75.00 psi

Toe Reinforcing = # 6 @ 18.00 in

Heel Reinforcing = # 5 @ 18.00 in
Key Reinforcing = None Spec'd

Other Acceptable Sizes & Spacings

Toe: #4@ 7.93 in, #5@ 12.29 in, #6@ 17.45 in, #7@ 23.80 in, #8@ 31.34 in, #9@ 39
Heel: #4@ 7.93 in, #5@ 12.29 in, #6@ 17.45 in, #7@ 23.80 in, #8@ 31.34 in, #9@ 39
Key: No key defined

Min footing T&S reinf Area 1.81 in2

Min footing T&S reinf Area per foo 0.30 in2 /ft

If one layer of horizontal bars: If two layers of horizontal bars:

#4@ 7.94 in #4@ 15.87 in
#5@ 12.30 in #5@ 24.60 in
#6@ 17.46 in #6@ 34.92 in
Footing Torsion, Tu = 0.00 ft-lbs
Footing Allow. Torsion, phi Tu = 0.00 ft-lbs
If torsion exceeds allowable, provide supplemental design for footing torsion.

Tilt
Horizontal Deflection at Top of Wall due to settlement of soil
(Deflection due to wall bending not considered)

Soil Spring Reaction Modulus 250.0 pci

Horizontal Defl @ Top of Wall (approximate only) 0.179 in
The above calculation is not valid if the heel soil bearing pressure exceeds that of the toe,
because the wall would then tend to rotate into the retained soil.