Solder,

Desolder
& Rework

Solutions and systems for soldering, rework and repair of electronics

worldwide
 ST Systems
In today’s environment flexibility isn’t
just important, IT’S THE KEY
TO SUCCESS...
Component foot-prints are shrinking, through-put requirements With over 50 years of experience and industry leadership in
are increasing, and thermally massive power management rework and repair technology and techniques, PACE provides
components (connectors, heat sinks, RF shields, and SMDs) on much more than simply equipment. When you purchase PACE
heavy ground planes are not going away anytime soon. Oh yes, products, you receive access to one of the most valuable
let’s not forget about the challenges of incorporating Lead Free resources in the industry; PACE’s applications and technical
solders into your process! Being locked into one heat control support services. Over the years, our applications support
technology on your Soldering/Desoldering system isn’t going to services have been the cornerstone of quality assurance
open the door to your success... and repair reliability for countless customers. Whenever you
encounter a new component, a new PCB, Lead Free Solder,
The ability to have multiple heating technologies available within or if you just want reassurance that your process is safe and
a single system directly affects your bottom line. Until now, effective, simply contact PACE and we will create a procedure
most systems only offer one type of heating technology which for you that not only identifies the equipment required to do the
will never fit every application efficiently. The time has come for job correctly, but also every step in the process! Please visit our
soldering and desoldering systems to evolve. website, [Link].

Table of Contents Page

Introduction 1
PACE Heating Technology 2
....FLEXIBILITY DRIVES THROUGH-PUT! PACE Handpieces 3-4
ST Soldering Systems / WJS 100 5
ST 30 / ST 50 / ST 70 Power Supplies 6
PACE is proud to introduce your key to future success...The
Dual Channel Soldering System / ST 100 7
INTELLIHEAT® Control System. IntelliHeat® is the only thermal
control system capable of managing multiple types of heating Lead Free Accessories 8
technologies within a single Power Source. There is no longer a ST Desoldering Systems / ST 65 / ST 75 / ST 115 9
need to have multiple Power Sources on your work bench or to ST System Specifications 10
force operators to use only one heating technology. Simply plug
Rework & Repair Systems / MBT 350 11
in any compatible handpiece and IntelliHeat® does the rest.
MBT 301 12
The IntelliHeat® Control System allows either SensaTemp® or Tip- Handpiece & Power Source Charts 13
Heater Cartridge based technology handpieces to be plugged SMR Rework Systems / SMR 14
into a single Power Source. Finally, the benefits of SensaTemp®
SensaTemp Systems
®
15
and Tip-Heater Cartridge based technology can be found in a
single system, without restriction. Lead Free Soldering 16
Nitrogen Soldering 17
PACE’s legendary SensaTemp® technology is renowned for WJS-100 Standard Soldering Tips 18
its temperature stability and ability to handle high mass appli-
TD-100 Standard Soldering Tips 19-20
cations. For smaller components and when through-put is
important, there is Tip-Heater Cartridge based technology. TD-100 Diamond Series Tips 21
Tip-Heater Cartridge based technology is a patented technology TD-100 SMT Removal Tips 22
that boasts the best response time for high volume applications MT-100 / TP-100 SMT Removal Tips 23
and easily keeps up in a fast paced environment.
PS-90 Soldering Tips 24

Upgrade your equipment, clear off your work bench and PS-90 SMT Removal Tips / SMR Pulse Heat Tips 25
unlock your success with INTELLIHEAT ®! SX-100 / SX-90 Desoldering Tips 26
SX-100 Surface Mount Removal Pik-Tips 27
TT-65 SMT Removal Tips 28
TJ-70 / TJ-85 Hot Jet Nozzles 29
1
Product Page 30
Tip-Heater Cartridge Technology
The key advantage of Tip-Heater Cartridge based technology is that its advanced electronics provide instantaneous load sensing and
on-demand power to quickly reflow solder joints, regardless of the mass of the application. Further, the position of the control sensor is as
far forward as possible to immediately respond to the thermal demand of the work. The tip and heater are permanently coupled, ensuring
all the heat generated by the heater is available for use by the tip. For applications where the work cycle is high and for micro-miniature
applications the direct power approach is ideal as the thermal demand is continuously monitored and the heater responds immediately by
providing adequate power to meet the demand from the work, without overshoot.

Control Sensor Sensor “Printed” on Ceramic Heater - Standard resistance

Position Heating Element, (40-60 W)
Relative to Tip Poor Position
Inefficient

Curie-Point Heating Systems - High frequency emission

creating heat in ferromagnetic slug using its Curiepoint
to control temperature (30-40 W)
For efficient heating, accurate Fair Position
Fairly Efficient
control and for forming the best
solder joint, use an iron with PACE SensaTemp® Precision Control System -
High mass resevoir heater with platinum RTD sensor.
the shortest sensor pathway! (52 W)

Good Position
Efficient

PACE Tip Heater Cartridge System - High thermo

delivery, Sensor controlled ceramic heater/tip cartridge
(62-120W)
Best Position
Highly Efficient

MAINTAINING PERFORMANCE IN THE

“GREEN” ZONE IS MORE LIKELY AS
SensaTemp Technology ®

At the heart of SensaTemp® is a laser trimmed, platinum RTD

SENSOR PATHWAY BECOMES SMALLER sensor that is more than 5 times more accurate than conven-
tional thermo-couples. This level of accuracy allows for safe,
productive soldering at the lowest possible temperatures. As a
Ideal Iron Perfomance result, the amount of time spent reflowing each joint is reduced,
minimizing the possibility of damage. Additionally, SensaTemp®
350° C
allows you to change tips, heaters and handpieces at will,
without ever having to re-calibrate! SensaTemp®’s unique heater
design acts as a “thermal reservoir” that minimizes tip temper-
ature overshoot, ensures temperature stability and provides
reserve power that can be accessed instantaneously when high
200° C mass applications are being performed.

SensaTemp® delivers consistent, repeatable results regardless of

the thermal demand of the work. Its ability to respond quickly is
ideal for light work, while its amazing thermal capacity can meet
0° C the challenges of the heaviest thermal loads, providing the oper-
ator with the flexibility that is essential in today’s ever changing
WORKFLOW INCREASING
environment. Regardless of your application, SensaTemp®
Ideal Process delivers unsurpassed thermal performance, productivity and
Too Hot Too Cold
Control Window “bottom line” savings.

Tip Temperature Solder Joint

Temperature
2
 PACE
Handpieces
TD-100 Thermo-Drive® Soldering Iron
The TD-100 Thermo-Drive® Soldering Iron is the only iron crafted by
a team of surgical instrument engineers and is uniquely designed
to eliminate operator fatigue, improve control and enhance produc-
tivity in demanding soldering applications.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0147-P1
IntelliHeat® Kit: 6993-0263-P1

PS-90 Universal Soldering Iron

The Universal Soldering Iron is ideal for most soldering applica-
tions and SMT rework operations where high thermal capacity
and flexibility are required.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0147-P1
IntelliHeat® Kit: 6993-0263-P1
SensaTemp® Handpiece Only: 6010-0131-P1
SensaTemp® Kit: 6993-0199-P1

MT-100 MiniTweez®
The only high capacity, micro tweezer on the market today features
soft comfort grips, the smallest stroke available, and its tweezing
action mimics the natural motion of the human hand to eliminate
hand fatigue.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0148-P1
IntelliHeat® Kit: 6993-0264-P1

TP-100 ThermoPik®
The newest tool for SMT component removal the TP-100. The
TP-100 is designed to reflow and remove QFPs in seconds.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0158-P1
IntelliHeat® Kit: 6993-0280-P1

3
 PACE
Handpieces

SX-100 Sodr-X-Tractor®
The best performing, in-line, vacuum desoldering tool is ideal for
Thru-Hole desoldering when fitted with SX-100 Desoldering Tips and
for SMT land clean-up when fitted with SX-100 Flo-D-Sodr® Tips.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0149-P1
IntelliHeat® Kit: 6993-0266-P1
SensaTemp® Handpiece Only: 6010-0106-P1
SensaTemp® Kit: 6993-0213-P1

TT-65 ThermoTweez®
The most versatile and only patented SMT removal tool provides
safe, one-handed, rapid reflow and component removal of PLCCs
and other 4 or 2 sided SMT components.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0151-P1
IntelliHeat® Kit: 6993-0268-P1
SensaTemp® Handpiece Only: 7025-0001-P1
SensaTemp® kit: 6993-0207-P1

TJ-85 ThermoJet®
When the precise application of hot air is required, our slim line air
pencil is ideal for delivering heat for the installation and removal of
chip components, SOTs, and SOICs.

Part Numbers:
IntelliHeat® Handpiece Only: 6010-0153-P1
IntelliHeat® Kit: 6993-0270-P1
SensaTemp® Handpiece Only: 6010-0142-P1
SensaTemp® Kit: 6993-0247-P1

TJ-70 ThermoJet®
The TJ-70 ThermoJet® hot air pencil is ideal for delivering heat for
the installation and removal of chip components, SOTs, and SOICs.
A variety of quick change nozzles are available, to meet your opera-
tional needs. The TJ-70’s airflow is activated with a foot pedal. This
slim hot air tool is ideal for the precise application of hot air for large
SMDs down to 0201s.

Part Numbers:
IntelliHeat® Handpiece Only: 7023-0003-P1
IntelliHeat® Kit: 6993-0292-P1
SensaTemp® Handpiece Only: 7023-0002-P1
SensaTemp® Kit: 6993-0206-P1

4
ST Soldering
Systems WJS 100
The WJS 100 features all the advanced process control
technology you have grown to expect from PACE but now with
nearly twice the maximum power output to make easy work
of your most challenging, high-thermal-mass or high-volume
soldering applications.

Integral to the WJS 100 solution is a special range of gold-end

tip-heater cartridges* uniquely engineered to deliver maximum
heat through-put to the work and increase productivity while
allowing you to solder at safer, lower temperatures—even with
lead-free solder.

The WJS 100 is fully programmable, loaded with features, and

incorporates PACE’s exclusive IntelliHeat® Control Technology.
The WJS 100 comes standard with a special anniversary
edition of PACE’s renowned TD-100 Thermo-Drive® Handpiece,
considered by many to be the most comfortable soldering
handle available.

• IntelliHeat® Control Technology.

• Fully programmable, digital processor, LED display
and keypad.
• Password lockout
• Temp Setback and Auto-Off helps to maximize tip
life and saves on power costs.
• Definable Operating Temperature Range via “Hi”
and “Lo” Setting.
• Nearly twice the maximum power output increases
productivity at safer, lower temperatures—even on
the heaviest loads.

8007-0558 8007-0560 8007-0559 8007-0561

Specifications 120 Volt System with 120 Volt System with 230 Volt System with 230 Volt System with
Standard Cubby ISB Cubby Standard Cubby ISB Cubby

Power Requirements 120 W Maximum Output, 97-127 VAC, 50/60 Hz 120 W Maximum Output, 197-253 VAC, 50/60 Hz
Dimensions 104mm (4.1") H x 130mm (5.1") W x 152mm (6") D
Weight 2.3 kg (5 lbs)
Control LED Digital Display and Keypad
RoHS Compliant Yes
Control Technology IntelliHeat®
Tip to Ground Resistance 2 ohms or less
Calibration Typically not needed, but system can be calibrated using PACE’s Easy-Cal software feature (included in each system)
Temperature Accuracy Meets or exceeds ANSI-J-STD
Absolute Temperature
1.1°C (2°F) at idle tip temp
Stability
Temperature Range 205-454°C (400-850°F)
Tips 1128 Series, Ultra-Performance Tip-Heater Cartridge Tips with Gold End Connector*.
Soldering Handpiece Commemorative 50th Anniversary TD-100 Thermo-Drive® Soldering Handpiece

TD-100 Tip and Tool stand can hold up to 6 tips. Comes standard with
sponge, stay-moist well and brass wool to clean oxidation from tip.
Iron Stand
WJS Systems are available with PACE’s standard cubby or with the Instant
SetBack (ISB) Cubby that extends tip life and saves energy.

*The WJS 100 can only be used with 1128 series tips and the TD-100 Thermo-Drive® Soldering Handpiece.
 ST Systems
Power Supplies

ST 30
The ST 30 is a single channel system with dial control featuring IntelliHeat®. • IntelliHeat® Control Technology
The system is packaged with the TD-100 ThermoDrive Soldering Iron or can • °C/°F Temperature Scales
be purchased as a Power Source only and combined with any of 4 optional • Temperature Adjustment Lockout
handpieces. The ST 30 improves quality, reduces costs and eliminates • ESD grounding jack
the maintenance and calibration hassles associated with other systems. • ESD Safe metal housing
The heavy-duty metal housing makes this system the ideal choice for the
• Stackable
harshest environments and the sloped face of the front panel is a standard
feature for ease of use. An optional mounting bracket (P/N 1321-0609-P1)
• Can be mounted under
is available to mount the system under a work-bench or shelf, preserving
workbench or shelf with optional
precious bench top space. The optional Instant-SetBack Cubby is avail-
bracket (1321-0609-P1)
able for the TD-100 ThermoDrive Soldering Iron to extend tip life, especially
beneficial when Lead Free solders are used.

ST 50
The ST 50 is a single channel, digital power supply that is available with the • IntelliHeat® Control Technology
TD-100 ThermoDrive Soldering Iron or PS-90 SensaTemp® Soldering Iron. • Digital Display & Keypad
The ST 50 can also be purchased as a Power Source only and combined • °C/°F display options
with any of 4 optional handpieces. The programmable features of the ST 50 • Password lockout
cannot be found anywhere on similarly priced systems! The ST 50 improves
• Temperature SetBack
quality, reduces costs and eliminates the maintenance and calibration
• Auto-Off
hassles associated with other systems. The ST 50 features IntelliHeat®
Control Technology. The heavy-duty, durable metal housing ensures years • Definable operating temperature
of service and the sloped face of the front panel is a standard feature for range
ease of use. An optional mounting bracket (P/N 1321-0609-P1) is avail- • ESD grounding jack
able to mount the system under a work-bench or shelf, preserving precious • ESD Safe metal housing
bench top space. The optional Instant-SetBack Cubby is available for the • Stackable
TD-100 ThermoDrive Soldering Iron to extend tip life, especially beneficial • Can be mounted under
when Lead Free solders are used. workbench or shelf with optional
bracket (1321-0609-P1)

ST 70
The ST 70 is a single channel system that is controlled by POWER • IntelliHeat® Control Technology
MODULES™ and comes with the ThermoDrive Soldering Iron (TD-100). • Performance level lockout
The system can also be purchased as a Power Source only and combined (if Power Module is removed the
with any of 4 optional IntelliHeat® handpieces. The ST 70 is the easiest to system is shut down.)
operate. Simply select the performance level you desire, plug in the appro- • ESD grounding jack
priate Power Module and the system takes care of the rest! The ST 70 • ESD Safe metal housing
improves quality, reduces costs while protecting your process. The heavy-
• Stackable
duty metal housing makes this system the ideal choice for the harshest
• Can be mounted under
environments and the sloped face of the front panel is a standard feature
workbench or shelf with optional
for ease of use. An optional mounting bracket (P/N 1321-0609-P1) is avail-
bracket (1321-0609-P1)
able to mount the system under a work-bench or shelf, preserving precious
bench top space. The optional Instant-SetBack Cubby is available for the • Supplied with 6.5, 7 and 7.5
TD-100 ThermoDrive Soldering Iron to extend tip life, especially beneficial Power Modules
when Lead Free solders are used.

Power Module Part Number Color

Heat Level 5 1207-0446-01-P1 Green

Heat Level 5.5 1207-0446-02-P1 Blue
Heat Level 6 1207-0446-03-P1 Orange
Heat Level 6.5 1207-0446-04-P1 Gold
Heat Level 7 1207-0446-05-P1 Red
Heat Level 7.5 1207-0446-06-P1 Purple
Heat Level 8 1207-0446-07-P1 Black
Heat Level 8.5 1207-0446-08-P1 Silver
6
 Dual Channel
Soldering System

ST 100
The answer for Lead Free
solder transition...
While transitioning from lead containing solders to Lead Free
solders a very real problem is that most soldering operations will
need to utilize Lead Free AND lead containing solders at the same
time. Having only one soldering iron, or other handpiece, on the
bench will ultimately lead to cross-contamination issues and result
in lower productivity and potentially, higher costs. The ST 100 is
a fully programmable system featuring two, individually controlled,
IntelliHeat® compatible handpiece channels. The system allows
for 2 soldering irons, 2 MiniTweezers or one of each to co-exist
on a workbench. Color coding accessories that clearly identify system. Also, a process window can be defined for the handpiece
which handpiece is designated for use with Lead Free and lead using leaded solder, and a separate process window can be
containing solders are available. defined for the handpiece using lead containing solder. Operators
can be given a range of 5 to 450°F to operate within!
The ST 100 is loaded with features to improve quality, control your
process, increase through-put, and extend tip life. The system is To maximize tip life and reduce operating costs, PACE’s well recog-
fully programmable and can be password protected to prevent nized “SetBack” and “Auto-Off” features are included. The system
unauthorized changes. When high-mass tips are used, an offset will automatically reduce the set temperature to below solder melt
can be programmed into the system. temperatures, then turn off after a user defined period of inactivity,
from 10 to 90 minutes each. To really protect the more expensive
Technicians can become frustrated with being locked into a single tip-heater cartridge and fine point soldering tips from oxidation,
temperature. Additionally, a higher set temperature is often desired the TD-100 iron can be used with the PACE’s “Instant-SetBack
when working with Lead Free solders. The ST 100 has the solution! Cubby”. The cubby puts the iron’s channel into SetBack if it has
An approved, unique, operating range or process window, can be been in the cubby for more than 45 seconds! Up to two Instant-
programmed FOR EACH HANDPIECE, allowing operators the SetBack cubbies can be connected to the ST 100.
flexibility to do their work, while eliminating the risks associated
with giving techs access to the entire temperature range of the The backlit, digital, LCD screen displays the temperature of both
handpiece channels or with scan mode activated will cycle through
the handpiece channels one at a time displaying set and actual
temperatures. The backlight and character contrast on the display
can be adjusted to meet individual preferences. Finally, the system
can be programmed with the name of the operator or company
which is displayed when the system is turned on.

7
 Lead Free
Accessories
CUSTOMIZE YOUR SYSTEM
for even greater flexibility.

Instant-Setback Cubby
The optional Instant-Setback Cubby is available for use with the ST 30,
ST 50, ST 65, ST 70, ST 75, ST 100, ST 115, MBT 301, MBT 350 and
WJS 100. When connected, it automatically puts the system into SetBack
mode when the TD-100 Iron has been in the cubby for 45 seconds.
SetBack mode means that the temperature is set to just below solder
melt temperature so the corrosive action of the leaded or Lead Free solder
is stopped, maximizing the life of your tips! The system returns to normal
operation when the iron is removed from the cubby. The part number for
the Instant-SetBack Cubby is 6019-0084-P1.

Lead Free Accessories to Identify Lead-Free Handpieces in a Mixed Solder Alloy Environment

Description Part Number

MT-100/TP-100 Green, Lead Free Handpiece Cubby 6019-0080-G-P1

Replacement Green Comfort Grips for MT-100, pack of 2 1119-0177-P2

Green Comfort Grip and Green Handpiece Insert for TD-100 Tip & Tool Stand 6993-0283-P1

Replacement Green Comfort Grips for TD-100, pack of 5 1119-0176-P5

8
 ST Desoldering
Systems

ST 65
The ST 65 is a single channel, dial control power supply that is compat- • IntelliHeat® Control Technology
ible with all IntelliHeat® handpieces and comes as a system with the new • Dial control
SX-100 Sodr-X-Tractor or as a Power Source only. Featuring a powerful • °C/°F Temperature Scales
multistage venturi that is powered by your compressed air source, the ST • Temperature lockout
65 is ideal for application where continuous vacuum or pressure is required. • Patented Snap-Vac Technology
An N2 source can be connected to create an inert gas reflow environment • ESD grounding jack
when using an N2 capable soldering iron. The heavy-duty, durable metal • ESD Safe metal housing
housing ensures years of service and the sloped face of the front panel • Stackable
is a standard feature for ease of use. An optional mounting bracket (P/N • Can be mounted under
1321-0609-P1) is available to mount the system under a work-bench or workbench or shelf with optional
shelf, preserving precious bench top space. N2 capable soldering iron. bracket (1321-0609-P1)

The ST 75 and ST 115 are ideal for users having to deal with wide ranges of applications. With these systems, you can solder, desolder, remove
components with a variety of tweezers and thermo-piks, as well as make use of the high performance, foot pedal activated, air pencil. The systems come
standard with PACE’s patented SNAPVAC desoldering technology to ensure quick, clean removal of solder from any through-hole joint. The Hi-Flo pump
is so powerful that you won’t lose vacuum in continuous use applications when removing residual/excess solder from surface mount leads. The new, high
resolution pressure control valve delivers the widest range of adjustable airflow available on the market today. So if you’re using the new TJ-85 to reflow a
PLCC or an 0201 resistor, you always have the precise level of control that you need to get the job done right!

ST 75
A single channel, dial control power supply, the ST 75 is compatible with • IntelliHeat® Control Technology
all IntelliHeat® handpieces and comes as a system with the new SX-100 or • Dial control
as a Power Source only. The ST 75 improves quality, reduces costs and • °C/°F Temperature Scales
eliminates the maintenance and calibration hassles associated with other • Temperature lockout
systems. The heavy-duty, durable metal housing ensures years of service • Hi-Flo Pump
and the sloped face of the front panel is a standard feature for ease of use. • Patented Snap-Vac Technology
• ESD grounding jack
• ESD Safe metal housing
• Stackable

ST 115
A single channel, digital display, fully programmable power supply, the ST • IntelliHeat® Control Technology
115 is compatible with all IntelliHeat® handpieces and comes as a system • Digital Display and Keypad
with the new SX-100 or as a Power Source only. The programmable features • °C/°F Display Options
of the ST 115 cannot be found anywhere on similarly priced systems! The • Password lockout
ST 115 improves quality, reduces costs and eliminates the maintenance and • Temperature SetBack
calibration hassles associated with other systems. The heavy-duty, durable • Auto-Off
metal housing ensures years of service and the sloped face of the front • User defined operating
panel is a standard feature for ease of use. temperature range
• Hi-Flo Pump
• Patented Snap-Vac Technology
• ESD grounding jack
• ESD Safe metal housing
• Stackable
9
 ST System
Specifications
Specifications St 30 St 50 St 70 St 100

System with TD-100 115v 8007-0499 8007-0500 8007-0504 8007-0525

System with PS-90 115v N/A 8007-0532 N/A N/A
Power Source Only 115v 8007-0497 8007-0501 8007-0505 8007-0524
System with TD-100 230v 8007-0512 8007-0514 8007-0518 8007-0527
System with PS-90 230v N/A 8007-0533 N/A N/A
Power Source Only 230v 8007-0513 8007-0515 8007-0519 8007-0526
Power Requirements 97-127 VAC, 50/60 Hz, 90 Watts max. 197-253 VAC, 50/60 Hz, 90 Watts max.
135mm (5.3") H x 165mm (6.5") W
Dimensions 104mm (4.1") H x 130mm (5.1") W x 152mm (6.0") D
x 260mm (9.25") D
Weight 5 Kg (11 lbs.) 5 Kg (11 lbs.)
Control Dial LED Display Power Module LCD Display & Keypad
Control Technology IntelliHeat
Tip to Ground Resistance 2 ohms or less
Temperature Accuracy Meets or exceeds ANSI-J-STD 001 N/A Meets or exceeds ANSI-J-STD 001
Absolute Temperature
± 1.1°C (± 2 °F) at idle tip temp.
Stability
Tip Heater Cartridge Technology Handpieces = 205°C to 454°C (400°F to 850°F)
Temperature Range SensaTemp® Dial Control 176°C to 482°C (350°F to 900°F)
SensaTemp® Digital Control 37°C to 482°C (100°F to 900°F)
System Can Be Calibrated Yes

Specifications ST 65 ST 75 ST 115

System 115v 8007-0502 8007-0506 8007-0508

Power Source Only 115v 8007-0503 8007-0507 8007-0509
System 230v 8007-0516 8007-0520 8007-0522
Power Source Only 230v 8007-0517 8007-0521 8007-0523
97-127 VAC, 50/60 Hz, 90 Watts max. 97-127 VAC, 50/60 Hz, 120 Watts max.
Power Requirements
197-253 VAC, 50/60 Hz, 90 Watts max. 197-253 VAC, 50/60 Hz, 120 Watts max.
104mm (4.1") H x 130mm (5.1") W
Dimensions 88mm (3.5") H x 171mm (6.75") W x 254mm (10") D
x 152mm (6.0") D
Weight 2.3 Kg (5 lbs.) 4 Kg (9 lbs.)
Control Dial Dial LED Display & Keypad
Control Technology IntelliHeat
Tip to Ground Resistance 2 ohms or less
Temperature Accuracy Meets or exceeds ANSI-J-STD
Absolute Temperature Stability ± 1.1°C (± 2°F) at idle tip temp.
Tip Heater Cartridge Technology Handpieces = 205°C to 454°C (400°F to 850°F)
Temperature Range SensaTemp® Dial Control 176°C to 482°C (350°F to 900°F)
SensaTemp® Digital Control 37°C to 482°C (100°F to 900°F)
System Can Be Calibrated Yes
Vacuum/Pressure Source Type Compressed Air Powered Venturi Self Contained Pump
Vacuum Rise Time 150 ms Average
Vacuum (Nominal) 20 in Hg max
Flow Control Valve Coarse Adjustment High Precision Needle Valve
Pressure (Nominal) 18 p.s.i. max
Air Flow (Nominal) 8 slpm max

10
 Rework & Repair
Systems
Advanced Technology and
Programmability

MBT 350
The MBT 350 is loaded with features to improve quality, increase
through-put, extend tip life, and protect your process. The system is
fully programmable and can be password protected from unauthorized
changes. In some cases technicians become frustrated with being locked
into a single temperature. The MBT 350 provides the solution! An approved
operating range can be programmed allowing operators the flexibility to do
their work, while eliminating the risks associated with giving techs access to
the entire temperature range of the system. Operators can be given a range
of 5 to 450˚F (3-250˚C) to operate within! When high-mass tips are required,
an offset can be programmed for each of the three channels, individually.

To maximize tip life and reduce operating costs, PACE's well recognized
“SetBack” and “Auto-Off” features are included. The system will automati-
cally reduce the set temperature by 50% then turn off after a user defined pencil, the high resolution, pressure control valve allows for precise adjust-
period of inactivity, from 1 to 90 minutes. To really protect your more expen- ment when working on the smallest components such as 0201’s.
sive tip-heater cartridge and fine point soldering tips from oxidation, the
TD-100 can be used with the new “Instant-SetBack Cubby.” The cubby puts The new backlit, digital, LCD screen displays the temperature of all three
the iron's channel into setback if it’s in the cubby for more than 45 seconds! handpiece channels or, with scan mode activated, will cycle through the
Up to two Instant SetBack cubbies can be connected to the MBT 350. handpiece channels one at a time displaying set and actual temperatures.
The backlight and character contrast on the display can be adjusted to
The new dual purpose vacuum/pressure pump and delivery system meet individual preferences. And finally, the system can be programmed
featuring PACE's patented SNAP-VAC Technology, provides the most with the name of the operator or company which is displayed when the
vacuum available for desoldering applications. When used with an air system is turned on.

1 TD-100 Thermo-Drive Iron

2 MT-100 MiniTweez 1 2 3

3 PS-90 Universal Iron

4 T-65 ThermoTweez

5 TJ-85 ThermoJet

6 SX-100 Sodr-X-Tractor

7 TP-100 ThermoPik

4 5 6 7

11
Simple and easy to use
for rework technicians or
operators on the line.

MBT 301
The MBT 301 is a multi-technology system with two, individually
controlled, universal handpiece channels. The system features a
two-line back lit LCD display. The programmable features include:
password protection from unauthorized changes, a user defin-
able temperature operating range, and “SetBack” & “Auto-Off”
functions to preserve tip life. To protect your more expensive
tip-heater cartridge and fine point soldering tips from oxidation, the
TD-100 can be used with the optional “Instant-SetBack Cubby”.
The cubby puts the iron’s channel into setback if it is idle in the
cubby for more than 45 seconds! One Instant SetBack Cubby can
be connected to the MBT 301.

The new dual purpose vacuum/pressure pump and delivery system

featuring PACE’s patented SNAP-VAC Technology, provides the
most vacuum available for desoldering applications. When used
with an air pencil, the high resolution, pressure control valve allows
for precise adjustment when working on the smallest components
such as 0201’s.

Specifications MBT 301 MBT 350 MBT 301 E MBT 350 E

Kit with Handpieces Part Numbers: 8007-0478 8007-0454 8007-0479 8007-0455

(TD-100 & SX-100) (TD-100, MT-100 & SX-100) (TD-100 & SX-100) (TD-100, MT-100 & SX-100)

Power Source Only Part Numbers: 8007-0480 8007-0452 8007-0481 8007-0453

Power Requirements 120 VAC, 60 Hz (240 watts maximum) 230 VAC, 50 Hz (240 watts maximum)

IntelliHeat Compatibilty
®
IntelliHeat Handpieces with Tip Heater Cartridge or SensaTemp® Technology
®

Dimensions 135mm (5.3") H x 165mm (6.5") W x 260mm (9.25") D

Weight 5 Kgs (11 lbs.)

Tip to Ground Resistance < 2 Ohms

Temperature Stabililty ± 1.1°C (2°F)

Temperature Accuracy Meets or exceeds ANSI J Std 001

37-482°C (100-900°F) SensaTemp®

Set Temp Range
205-454°C (400-850°F) tip Heater Cartridge

Vacuum Rise Time 150 ms Average as measured with PACE Process Monitor

Vacuum 20 in Hg max

Pressure 18 p.s.i. max

Air Flow 8 SLPM max

12
Handpieces
Handpiece & Power Source Charts
Handpiece Description Part Numbers

TD-100 Thermo-Drive Iron The most responsive soldering iron available. Uses tip-heater cartridges. 6993-0263-P1

TD-100 N A nitrogen compatible version of the TD-100. Requires 6993-0271-P1. 6993-0272-P1

TD-100 with Instant SetBack Cubby A kit containing the TD-100 and Instant SetBack Cubby 6993-0281-P1

MT-100 MiniTweez Tip-heater cartridge based tweezer for 2 sided SMD removal. 6993-0264-P1

TP-100 ThermoPik QFP removal tool with integrated component vacuum pick to lift reflowed component. 6993-0280-P1

TJ-70 ThermoJet Provides focused hot air for component installation and SMT land preparation. 6993-0206-P1

PS-90 Universal Soldering Iron Our famous High Capacity Soldering Iron for the most demanding applications. 6993-0267-P1

PS-90 N A nitrogen compatible version of the PS-90. 6993-0274-P1

SX-100 Sodr-X-Tractor The latest innovation in desoldering. Features disposable or reuseable solder traps. 6993-0266-P1

TJ-65 ThermoTweez High capacity tweezer for large or small SMDs. 6993-0268-P1

TJ-85 ThermoJet A foot-pedal activated precision air pencil for the installation or removal of SMDs. 6993-0270-P1

SX-100 Heat Sleeve Maintains comfortable temperature in heavy use applications. 6993-0229-P1

Instant SetBack Cubby for TD-100* Reduces tip temperature when iron is not in use. 6019-0084-P1

Nitrogen Regulator Assembly Controls the flow of nitrogen to tip. 6993-0271-P1

N2 Manifold Kit Connect up to 10 N2 irons to a single N2 source. 6993-0277-P1

Part Number includes handpiece and standard cubby * Does not include Handpiece.

Tip Heater Cartridge Technology Handpieces SensaTemp® Technology Handpieces

Kits & Applications

Kits & Applications TD-100 MT-100 TP-100 PS-90 SX-100 TT-65 TJ-85

Handpiece Kits 6993-0263-P1 6993-0264-P1 6993-0280-P1 6993-0267-P1 6993-0266-P1 6993-0268-P1 6993-0270-P1

(includes handpiece and tool stand) 6993-0281-P1

Handpiece Only Part Number 6010-0147-P1 6010-0148-P1 6010-0158-P1 6010-0150-P1 6010-0149-P1 6010-0151-P1 6010-0153-P1

High Cycle Soldering  

Standard Soldering  
High Mass Soldering 
Micro Soldering 
Chip Installation     
Solder Wicking   
Thru-Hole Desoldering 
SMT Land Preparation    
Solder Removal from Lands 
Large SMD Removal  
Standard SMD Removal     
Micro SMD Removal     
Large Component Installations*   
Standard Component Installations*   
Micro Component Installations*   
* with Solder Paste

Power Source Options - ST and MBT Systems = Optional Handpiece H = Standard handpiece packaged with System
Compatibility

Tip-Heater Cartridge WJS100 ST30 ST50 ST65 ST70 ST75 ST100 ST115 MBT 301 MBT 350
Handpieces

TD-100 H H H  H  H  H H
MT-100       3   H
TP-100     
SensaTemp® Handpieces WJS100 ST30 ST50 ST65 ST70 ST75 ST100 ST115 MBT 301 MBT 350

PS-90 H  H       
SX-100 H H H H H
TT-65          
TJ-85    
 SMR Rework
Systems

The SMR...finally, a
stand-alone Pulse-Heat
system from PACE.

SMR
The SMR features a Pulse Heat power output which provides
controlled temperature ramp-up to reflow temperatures, reducing
thermal shock risk and unwanted heating of adjacent solder joints.
The system can be used for the removal and installation of small
SMD’s, thermal wire stripping, resistance soldering of wires to
connector cups, lap repairs for conductors and traces and removal * Shown with three
of conformal coatings. optional handpieces.

• 4 SMR Pulse Heat Compatible Handpieces

• Adjustable power level from 1-20 (20 being
maximum power)
• An approved operating range can be programmed
allowing operators flexibility to do their work
• Clear LCD display with functional soft-keys to
perform operations
• ESD safe metal housing
• Password protected

Optional Handpieces
PACE’s StripTweez Handpiece (TS-15) has one application and one only,
Specifications SMR
thermal stripping of wires. Offering a range of tips for specific gauged wires,
the StripTweez comes standard with the SMR System.
8007-0565 (120V)
Part Number: 7012-0002-P1 Part Number
8007-0566 (230V)

PACE’s LapFlo Tool (LF-15) has two primary applications, conductor/trace/ 104mm (4.1") H x 130mm (5.1") W x
Dimensions
pad repairs and thermal parting e.g. controlled heat and abrasion for removal 152mm (6") D
of conformal coating and laminate repairs. Weight 6.3lbs
Part Number: 7013-0004-02-P1
60Hz, 80 Watts maximum at 115 VAC,
Power Requirements
50Hz at 230 VAC
PACE’s ResisTweez Handpiece (TW-15) has two main applications, wire to
terminal/lug soldering & desoldering and PLCC removal. Control LED Digital Display & Keypad
Part Number: 7009-0005-P1
RoHs Compliant Yes

PACE’s ConducTweez (CT-15) applications are focused on the installation Calibration Required No
and removal of chips, SOTs and SOICs. Power Range 1-20
Part Number: 7020-0001-P1

14
 SensaTemp ®

Systems
ST 25
The ST 25 soldering system from PACE improves quality, reduce • SensaTemp® Control Technology
costs and eliminate the maintenance and calibration hassles • Analog (dial) control
associated with other soldering systems. The ST 25 maximizes • °C/°F Temperature Scales
• Temperature Adjustment Lockout
heat delivery at low, safe temperatures and eliminates the need
• ESD grounding jack
for calibration. Heavy-duty metal housing makes the system the
• ESD Safe metal housing
ideal choice for the harshest production environments. The ST 25 • Stackable
system comes with the PS-90 Soldering Iron. • Can be mounted under work bench or shelf
with optional bracket (1321-0609-P1)

MBT 250
Self-contained, three channel capability offers high capacity, low temperature SMT/
Thru-Hole soldering and desoldering. Digital readout displays the current channel’s
temperature information, error codes and programming status. Supplied with PS-90
Universal Soldering Iron, SX-100 Sodr-X-Tractor, TT-65 ThermoTweez Handpiece &
TP-65 ThermoPik Handpieces.

PRC 2000
The PRC 2000 Benchtop Factory is the ultimate rework center. The PRC 2000 can
tackle just about any Thru-Hole, SMT application and is well suited for multilayer repairs
on damaged or prototype PCBs. Featuring 3 simultaneously active SensaTemp®
handpiece channels, a built-in paste dispenser, MicroChine for removing conformal
coatings or grinding away PCB laminate, and pulse heat technology. The PRC 2000
comes with 9 handpieces and continuously calibrates automatically.

Specifications ST 25 MBT 250 SD/MBT 250 SDTP PRC 2000 SMT PRC 2000 TH

8007-0203 (SD)
System 115 V 8007-0528 8007-0132 8007-0138
8007-0206 (SDTP)
Power Source Only 115 V 8007-0529 8007-0349 N/A N/A
8007-0204 (SD)
System 230 V 8007-0510 8007-0133 N/A
8007-0207 (SDTP)
Power Source Only 230 V 8007-0511 8007-0353 N/A N/A
Input Power Requirements 97-127 VAC, 50/60 Hz or 197-253 VAC, 50/60 Hz
Max Power Consumption 120 W 240 W 400 W
104mm (4.1") H x 130mm (5.1") 135mm (5.3") H x 165mm (6.5")
Dimensions 175mm (6.9") H x 350mm (13.75") W x 230mm (9.25") D
W x 152mm (6.0") D W x 260mm (9.25") D
Weight 2.3 Kgs (5 lbs.) 5 Kgs (11 lbs.) 13 Kgs (28.6 lbs.)
Control LED Display LED Display
Control Technology SensaTemp® (Black Connector HandPieces)
Tip to Ground Resistance 2 ohms or less
Temperature Accuracy Meets or exceeds ANSI-J-STD 001
Absolute Temperature Stability ± 1.1°C (± 2 °F) at idle tip temp.
Temperature Range 176° to 482°C (350° to 900°F) nominal
System Can be Calibrated Calibration not required
Pump Type N/A Self Contained Pump
Vacuum Rise Time N/A 150 ms Average
Vacuum (Nominal) N/A 20 in Hg max
Flow Control Valve N/A Coarse adjustment
Pressure (Nominal) N/A 18 p.s.i. max 7 p.s.i. max
15 Air Flow (Nominal) N/A 8 slpm max 13 slpm max
 Lead Free

Working with Lead Free

solders
Lead Free solders do not behave or look like their lead containing counter- When using Lead Free solders, regardless of alloy, it is absolutely imperative
parts. As our industry changes over to Lead Free solders, individual PCB that tips are properly maintained, otherwise tip life will be reduced significantly.
assemblers will need to address several issues relating to hand soldering and Tips should be cleaned frequently to remove oxidation before it becomes
rework. These issues include: impossible to remove. Tips should always be tinned when not being used,
otherwise oxidation will quickly form on the tip. If the iron will not be used for
Higher melting temperatures – which mistakenly lead to
•  extended periods of time, they should be turned off. Should oxidation form
operators increasing equipment operating temperatures. Higher that cannot be easily cleaned by tinning or by using a cleaning tool, PACE’s
operating temperatures do not make the process quicker, they can Tip-Brite is recommended.
actually slow it down.
Tip-Brite is a high quality tip tinner that will remove
Poor wetting and spreading properties – Additional time is
•  stubborn oxidation.
required when working with Lead Free solders, they do not spread or
wet like lead containing solders do. Operators must slow down. The use of equipment with SetBack and Auto-Off functions (standard on all
PACE equipment), is very desirable. Additionally, optional accessories such as
• Difficult to work with – Bridging and insufficient solder defects PACE’s Instant SetBack Cubby ensure that tip life is maximized. The Instant
are common, even for experienced operators, leading to operator SetBack Cubby puts the system into “SetBack” after 45 seconds of inactivity.
frustration and poor quality. When the iron is removed from the cubby, it restores itself to the set tempera-
ture almost immediately.
Dull grainy finish – makes inspection difficult.
• 
The use of nitrogen assisted soldering equipment helps to mitigate the
Because Lead Free solders oxidize quickly, more aggressive and longer lasting problems associated with using Lead Free solders. Nitrogen helps on two
fluxes are required to keep surfaces clean and free from oxidation. Working fronts. First, it creates an inert environment around the soldering tip, reducing
with no-clean fluxes is challenging as their process window is often small. the potential for tip to oxidize. Second, it assists in the soldering process at
Once they are burned off, oxidation immediately begins to form which can the PCB level by purging oxygen from the immediate area which reduces or
result in a marginal or defective solder joint. Additionally, increasing operating eliminates the formation of oxidation on the work site. This not only reduces
temperatures creates an ideal environment for oxidation to form and will also the amount of flux that is required, but it also helps to improve wetting,
lead to flux and solder ball splatter on the PCB. If the flux is splattered all over spreading and leaves a finish that is shinier and less grainy.
the PCB, it’s not able to do its job on the surfaces to be joined during the
soldering process. PACE’s nitrogen assisted soldering systems pass the nitrogen through or
around the heater before it is directed to the work site. This “pre-heats” the
Lead Free solders also affect soldering and rework tools and their effect is immediate area which can also help to reduce thermal shock to component
detrimental. Lead Free solders contain high percentages of tin, almost always leads and to components themselves. Pre-heating also allows for the use of
over 94%. Tin is a corrosive and active metal. When it mixes with iron (the lower, safer and more effective soldering temperatures.
protective layer on soldering tips), an inter-metallic compound is formed that
wears away more quickly than the iron would either by itself or when used PACE’s soldering systems offer legendary thermal control as well as advanced
with lead containing solder. This causes two problems, one is shorter tip features to maintain your process. Unique PACE features such as IntelliHeat,
life as the protective iron coating is dissolved in the tin, and the second is Power Modules and password protection ensure consistency and quality
that oxidation forms more quickly which is further exacerbated by the high in your process. Economical tips and standard features such as “SetBack”
temperature environment the tips work in. As a result, tin oxides form and and “Auto-Off” maximize tip life to reduce operating costs and increase your
create an inter-metallic compound with the iron plating on the tip. Once the bottom line.
oxidation begins to form, the tip will lose its ability to wet with solder and if
not cleaned off quickly, it becomes almost impossible to remove and the tip
must be replaced.

16
 Nitrogen
Soldering
PACE’s soldering systems offer legendary thermal control as well as advanced features to maintain your process. Unique PACE features
such as IntelliHeat®, Power Modules and password protection ensure consistency and quality in your process. Economical tips and
standard features such as “SetBack” and “Auto-Off” maximize tip life to reduce operating costs and increase your bottom line.

All ST & MBT systems, handpieces and tips are Lead Free soldering compatible and RoHS compliant.

They can be used with any Lead Free alloys without modification. PACE’s soldering systems, handpieces and tips are fully compatible
with your Lead Free process. PACE’s TD-100 soldering iron boasts one of the most efficient heat transfer capabilities and is clearly one
of the most responsive irons on the market today. This means that the TD-100’s ability to recover from thermal loading and maintain its
heat output is far superior to other conventional irons, eliminating the need for higher, unsafe temperatures when using Lead Free solders.
Quick and consistent heat transfer also ensures that flux is fully activated and burned off, leaving the work site properly prepared for the
formation of highly reliable solder joints. Our PS-90 soldering iron has been the staple of the industry for years and is known for its amazing
thermal capacity and ability to deliver the heat at safe, low temperatures. Both the TD-100 and PS-90 are available for use with nitrogen.

Handpiece Kit Handpiece Only

TD-100 N 6993-0272-P1 6010-0156-P1

PS-90 N 6993-0274-P1 6010-0157-P1

All ST products are compatible with either the PS-90 N and/

or the TD-100 N handpieces. The benefits of nitrogen assisted
N2 Regulator Accessory soldering are available for all of PACE’s soldering stations with
P/N:6993-0271-P1 the N2 Regulator Accessory which can be easily mounted to any
ST system.

All of PACE’s soldering, desoldering and component

removal tips are tinned with Lead Free solder
Due to the corrosive nature of the high tin content in Lead When reworking area array components with Lead Free solder,
Free alloys and because more aggressive fluxes are commonly the greatest enhancement to existing equipment is the use of
required when using Lead Free solders, we have also optimized nitrogen for reflow. All of PACE’s Area Array equipment comes
the iron plating on our tips to maximize thermal transfer while fitted for nitrogen use as standard.
providing for the longest life possible.
Additionally, PACE manufactures Fume Extraction Systems to
PACE is leading the way in soldering technology with our patented reduce exposure to harmful particulates and gases created from
“Diamond Series” tips. “Diamond Series” tips are manufactured hand soldering operations. PACE Fume Extraction Systems effec-
with an iron matrix that is impregnated with sub micron sized tively remove these contaminants from the workers breathing
diamond particles. The diamond-impregnated surface is harder zone thereby reducing or eliminating health risks and improving
and more corrosion resistant than iron alone. productivity.

17
 WJS-100 Standard
Soldering Tips

Tip Specifications

WJS Tips Description Tip Size - L Size - D Part Number

1/32" Conical Sharp Extended 12.75mm (0.502") .8128mm (0.032") 1128-0001-P1

1/64" Conical Sharp 9.144mm (0.36") .4064mm (0.016") 1128-0002-P1

1/64" Conical Sharp Bent 30 Degree 9.144mm (0.36") .4064mm (0.016") 1128-0003-P1

3/64" 30 Degree Chisel 9.906mm (0.39") 1.1938mm (0.047") 1128-0008-P1

13/64" Extra Large Chisel 7.62mm (0.3") 5.1562mm (0.203") 1128-0010-P1

1/32" 30 Degree Chisel 9.017mm (0.355") .8128mm (0.032") 1128-0012-P1

3/32" 30 Degree Chisel 9.017mm (0.355") 2.3876mm (0.094") 1128-0013-P1

1/16" 30 Degree Chisel 9.017mm (0.355") 1.5748mm (0.062") 1128-0019-P1

MiniWave ®
8.255mm (0.325") 2.794mm (0.11") 1128-0032-P1

0.25" Knife Blade 12.446mm (0.49") 6.35mm (0.25") 1128-0037-P1

1/8" 30 Degree Chisel 9mm (0.355") 3.2mm (0.125") 1128-0051-P1

Maximizing Tip Life

PACE recommends the following practices to maximize tip life.

1 
Always use the lowest possible temperatures while soldering. High temperatures cause tips to
oxidize faster, which reduces heat transfer and damages the protective iron plating.

2 
Avoid aggressive fluxes whenever possible. Aggressive fluxes erode tips faster; shortening their
useful life.

Should tips lose their tinning or Always use a properly sized tip for the work. Tips, that are too small, will wear out faster and tips
3 
wetting capability, a tip cleaner that are too large will wear unevenly which, in turn, will change the tip geometry rendering it useless,
such as PACE’s Tip-Brite may be possibly damaging pads.
used to restore them.
4 
Always tin tips when not in use and after cleaning on a damp sponge. A coating of solder will
prevent oxidation from forming which causes tips to lose their tinning or wetting capability.

5 
Always feed solder wire into the heated work, not the tip. Feeding solder directly into the tip will
cause pin-holes in the tip and will cause the flux in the solder wire to be burned off before it can activate
and prepare the surfaces being soldered.

18
 TD-100 Standard
Soldering Tips
Tip Specifications

Tips Description Tip Size - L Size - D Part Number

1/32" Conical Sharp Extended 13.4mm (0.530") 0.80mm (0.031") 1124-0001-P1

1/64" Conical Sharp 7.8mm (0.310") 0.40mm (0.016") 1124-0002-P1

1/64" Conical Sharp Bent 30 Degrees 7.8mm (0.310") 0.40mm (0.016") 1124-0003-P1

1/64" Conical Sharp Extended 13.5mm (0.535") 0.40mm (0.016") 1124-0004-P1

13/64" Conical Sharp Extended 4.7mm (0.188") 0.80mm (0.031") 1124-0005-P1

3/128" Conical 4.6mm (0.184") 0.58mm (0.023") 1124-0006-P1

1/16" 90 Degree Chisel 10.9mm (0.430") 2.03mm (0.080") 1124-0007-P1

3/64" 30 Degree Chisel 9.7mm (0.380") 1.20mm (0.047") 1124-0008-P1

3/64" 30 Degree Bevel 3.6mm (0.140") 1.20mm (0.047") 1124-0009-P1

13/64" Extra Large Chisel 7.62mm (0.300") 5.15mm (0.203") 1124-0010-P1

1/64" 60 Degree Bevel 14.7mm (0.580") 0.40mm (0.016") 1124-0011-P1

1/32" 30 Degree Chisel 9.1mm (0.360") 0.80mm (0.031") 1124-0012-P1

3/32" 30 Degree Chisel 9.9mm (0.390") 2.40mm (0.094") 1124-0013-P1

5/64" 60 Degree Chisel 4.7mm (0.185") 2.00mm (0.078") 1124-0014-P1

1/64" Conical, Sharp, Bent 30 Degrees, Extended 15.1mm (0.595") 0.40mm (0.016") 1124-0015-P1

3/64" Chisel Bent 30 Degrees 11.7mm (0.460") 1.20mm (0.047") 1124-0016-P1

1/16" 60 Degree Chisel 15.8mm (0.620") 1.60mm (0.063") 1124-0017-P1

1/32" Conical Sharp Extended 16.7mm (0.660") 0.80mm (0.031") 1124-0018-P1

1/16" 30 Degree Chisel 9.9mm (0.390") 1.60mm (0.063") 1124-0019-P1

1/8" 90 Degree Chisel 4.8mm (0.190") 3.20mm (0.125") 1124-0020-P1

3/128" Conical Sharp Bent 30 Degrees 14.4mm (0.570") 0.58mm (0.023") 1124-0021-P1

1/16" Conical Sharp 9.9mm (0.390") 1.60mm (0.063") 1124-0022-P1

1/8" 90 Degree Chisel Extended 8.6mm (0.340") 3.20mm (0.125") 1124-0023-P1

1/16" 30 Degree Bevel 9.9mm (0.390") 1.60mm (0.063") 1124-0024-P1

1/16" Conical Sharp Extended 12.1mm (0.478") 1.60mm (0.063") 1124-0025-P1

1/16" Chisel Bent 30 Degrees 9.7mm (0.385") 1.60mm (0.063") 1124-0026-P1

19
 TD-100 Standard
Soldering Tips
Tip Specifications

Tips Description Tip Size - L Size - D Part Number

3/128" Conical Sharp 15.2mm (0.600") 0.58mm (0.023") 1124-0027-P1

3/64" Chisel, Bent 30 Degrees, Extended 15.2mm (0.600") 0.91mm (0.36") 1124-0028-P1

1/32" 30 Degree Bevel 9.1mm (0.360") 1.91mm (0.75") 1124-0029-P1

1/32" Conical Sharp 9.9mm (0.390") 0.80mm (0.031") 1124-0030-P1

Heat Staking N/A 4.04mm (0.159") 1124-0031-P1

MiniWave ®
N/A 3.05mm (.120") 1124-0032-P1

Angled MiniWave® N/A 3.05mm (.120") 1124-0033-P1

Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1

Angled MiniWave® N/A 2.11mm (.083") 1124-0035-P1

1/128" Conical N/A 0.20mm (0.008") 1124-0036-P1

1/4 Flat Blade N/A 4.57mm (0.180") 1124-0037-P1

Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1

Angled MiniWave®, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1

MicroFine Single Sided Chisel N/A 0.9mm (.035") 1124-0040-P1

MicroFine Single Sided Chisel N/A 1.1mm (.045") 1124-0041-P1

MicroFine Conical N/A 0.25mm (.01") 1124-0042-P1

MicroFine Bent Conical N/A 0.76mm (.03") 1124-0043-P1

MicroFine Bent Conical N/A 0.5mm (.02") 1124-0044-P1

Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1

Micro-Wave N/A 1.1mm (.045") 1124-0046-P1

Angled Chisel 8.4mm (0.33") 1.33mm (0.051") 1124-0047-P1

Single Sided Chisel 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1

MiniWave® N/A 2.79mm (0.110") 1124-0049-P1

1/128" Conical, Special HA N/A 2.40mm (0.09") 1124-0050-P1

20
 TD-100 Diamond Series
Extended Life Soldering Tips

Unique to PACE...
Patented Diamond/Iron plating process using real diamonds that provides improved thermal performance
and long life when working with Lead Free solder.

Profile Description Part Number Profile Description Part Number

.016 Conical 1126-0601-P1 .06 Wide, Bevel 60 Degrees,

1126-0625-P1
.12x.06 Oval Face
.039 Conical 1126-0602-P1
.07 Bevel, 60 Degree 1126-0626-P1
.055 Conical, Blunt 1126-0603-P1
.078 Bevel, 45 Degree 1126-0627-P1
.031 Conical, Blunt 1126-0604-P1
.13 Bevel, 60 Degree 1126-0628-P1
.016 Conical, Long 1126-0605-P1
.118 Bevel, 45 Degree 1126-0629-P1
.016 Conical 1126-0606-P1
.023 Bevel, Special 1126-0630-P1
.016 Conical, Extended 1126-0607-P1
.031 Chisel Standard 1126-0631-P1
.024 Conical 1126-0608-P1
.047 Chisel Standard 1126-0632-P1
.039 Conical 1126-0609-P1
.062 Chisel Standard 1126-0633-P1
.031 Conical 1126-0610-P1
.094 Chisel Standard 1126-0634-P1
.047 Conical 1126-0611-P1
.157 Chisel Standard 1126-0635-P1
.016 Conical Bent 1126-0612-P1
.205 Chisel Standard 1126-0636-P1
.016 Conical, Blunt, Bent 1126-0613-P1
.157 Chisel Long Reach 1126-0637-P1
.016 Conical, Blunt 1126-0614-P1
.205 Chisel Long Reach 1126-0638-P1
.016 Conical Extended, Bent 1126-0615-P1
.078 Chisel Blunt 1126-0639-P1
.157 Bevel, 45 Degree 1126-0616-P1
.125 Chisel Blunt 1126-0640-P1
.078 Bevel, 60 Degree 1126-0617-P1
.055 Chisel, Bent 30 Degrees 1126-0641-P1
.118 Bevel, 60 Degree 1126-0618-P1
.062 Chisel, Bent 30 Degrees 1126-0642-P1
.157 Bevel, 45 Degree
1126-0619-P1 .055 Chisel, Bent, Extended 1126-0643-P1
Tinned on edge / face
.039 Bevel, 60 Degree, .185 Knife, 45 Degree 1126-0644-P1
1126-0620-P1
Extended
.039 Bevel, 45 Degree .181 Knife, 45 Degree 1126-0645-P1
1126-0621-P1
Tinned on edge / face
.185 Knife, 45 Degree, Blunt 1126-0646-P1
.078 Bevel, 45 Degree
1126-0622-P1
Tinned on edge / face .118 Knife, 45 Degree 1126-0647-P1
.118 Bevel, 45 Degree
1126-0623-P1
Tinned on edge / face Single Sided Chisel .08 Wide 1126-0648-P1

.039 Bevel, 45 Degree 1126-0624-P1

* Drawings are representative of tips actual shape. Actual tips may differ somewhat, other than front end geometry.

21
 TD-100 SMT
Removal Tips

Tip Specifications

Tip - Chip/Sot Removal Component Type Size - A Size - B Part Number

Chip 0402 Angle (fig. A) 2.2mm (.085") - 1124-0518-P1

(fig. A) (fig. E) Chip 0201 Angle (fig. A) 0.5mm (.02") - 1124-0533-P1

Chip 1808 (fig. B) 5.0mm (.195") - 1124-0520-P1
Chip 0402 (fig. C) 1.0mm (.40") - 1124-0521-P1
(fig. B) (fig. F)
Chip 0201 (fig. C) 0.5mm (0.2") - 1124-0534-P1
SOT 23 (fig. D) 1.8mm (.070") - 1124-0522-P1
(fig. C) (fig. G)
SOT 89 (fig. E) 2.8mm (.110") - 1124-0523-P1
Chip 1206 (fig. F) 3.6mm (.142") - 1124-0524-P1
(fig. D)
Chip 0805 (fig. G) 2.4mm (.095") - 1124-0525-P1

Tip - Soic/Sop/Tsop Removal Component Type Size - A Size - B Part Number

SOIC 14/16 5.2mm (.205") 10.5mm (.415") 1124-0504-P1

SOIC 20 9.6mm (.377") 13.6mm (.535") 1124-0505-P1
B SOP 28 10.8mm (.426") 18.6mm (.734") 1124-0506-P1
SOP 40 11.9mm (.467") 25.7mm (1.011") 1124-0507-P1
SOP 44 13.1mm (.516") 28.4mm (1.120") 1124-0508-P1
A
TSOP 56 18.8mm (.739") 14.1mm (.557") 1124-0509-P1
TSOP 28 12.0mm (.471") 8.5mm (.333") 1124-0510-P1
SOIC 8 5.1mm (.202") 4.65mm (.183") 1124-0519-P1
TSOP 40 18.8mm (.740") 10.4mm (.410") 1124-0526-P1

Tip - Soic/Sop/Tsop Removal Component Type Size - A Size - B Part Number

PLCC 28 Socket 9.3mm (.365") 9.3mm (.365") 1124-0511-P1

PLCC 32 14.2mm (.561") 11.7mm (.459") 1124-0512-P1
PLCC 44 16.8mm (.622") 16.8mm (.622") 1124-0513-P1
A QFP 144 20.6mm (.810") 20.6mm (.810") 1124-0514-P1
PLCC 28 11.8mm (.465") 11.8mm (.465") 1124-0515-P1
QFP 100/128 22.0mm (.865") 16.0mm (.628") 1124-0516-P1
PLCC 18 7.6mm (.300") 12.8mm (.505") 1124-0528-P1
B TQFP 80 12.5mm (.491") 12.5mm (.491") 1124-0529-P1
PLCC 52 19.4mm (.762") 19.4mm (.762") 1124-0530-P1
QFP 100 26.6mm (1.048") 26.6mm (1.048") 1124-0531-P1
VQFP 100 15.5mm (.610") 15.5mm (.610") 1124-0535-P1
TQFP 64 15.3mm (.602") 15.3mm (.602") 1124-0537-P1

Tip - Soic/Sop/Tsop Removal Component Type Size - A Size - B Part Number

Blade 6mm (.236") - 1124-0536-P1

Blade 10.8mm (.425") - 1124-0501-P1
A Blade 16.0mm (.630") - 1124-0502-P1
Blade 21.2mm (.835") - 1124-0503-P1
Blade 25.0mm (.984") - 1124-0532-P1

22
 MT-100 & TP-100 SMT
Removal Tips

MT-100 Tips
Tips - Chip/SOT Removal Component Type Size - A Size - B Part Number

A B Chip (fig. A) 0.2mm (.008") 0.2mm (.008") 1124-1001-P1

A B
(fig. A) (fig. B) Chip, SOT (fig. B) 0.7mm (.03") 0.5mm (.03") 1124-1002-P1

Chip, SOT (fig. B) 0.7mm (.03") 1mm (.04") 1124-1003-P1

A B
Chip, SOT (fig. B) 0.7mm (.03") 2mm (.08") 1124-1004-P1
(fig. C)
Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 6mm (.24") 1124-1005-P1

Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 8mm (.31") 1124-1006-P1

Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 10mm (.39") 1124-1007-P1

Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 13mm (.51") 1124-1008-P1

Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 18mm (.74") 1124-1009-P1

Chip, SOT, TSOPS (fig. C) 0.7mm (.03") 28mm (1.09") 1124-1010-P1

Chip Extended (fig. B) 0.6mm (.025") 1.0mm (.039") 1124-1011-P1

TP-100 Tips
Component Component
Tips Type Lead Count Size - A Size - B Part Number
Height Footprint

LQFP/TQFP 80 12mm (.472") 12mm (.472") 1.4mm 2.0mm 1124-2001-P1

A LQFP/TQFP 64, 80, 100, 120, 128, 168 14mm (.551") 14mm (.551") 1.4mm 2.0mm 1124-2002-P1

LQFP/TQFP 128, 144, 160, 176 20mm (.788") 20mm (.788") 1.4mm 2.0mm 1124-2003-P1

B LQFP/TQFP 176, 216 24mm (.945") 24mm (.945") 1.4mm 2.0mm 1224-2004-P1

LQFP/TQFP 208, 256 28mm (1.10") 28mm (1.10") 1.4mm 2.0mm 1224-2005-P1

QFP 52, 64, 80, 100 14mm (.551") 14mm (.551") 2.7mm 3.2mm 1124-2006-P1

QFP 52, 64, 80, 100 14mm (.551") 14mm (.551") 2.7mm 3.9mm 1124-2007-P1

QFP 64, 80, 100, 128 14mm (.551") 20mm (.788") 2.7mm 3.2mm 1124-2008-P1

QFP 64, 80, 100, 128 14mm (.551") 20mm (.788") 2.7mm 3.9mm 1124-2009-P1

QFP 120, 128, 144, 160, 208 28mm (1.10") 28mm (1.10") 3.4mm 3.9mm 1124-2010-P1

QFP 160 28mm (1.10") 28mm (1.10") 3.4mm 3.9mm 1124-2011-P1

23
 PS-90
Soldering Tips

Tips Description Tip Size Part Number

1/16" Chisel (High Capacity) 1.60mm (0.063") 1121-0414-P5

1/64" Conical 0.40mm (0.016") 1121-0357-P5

1/64" Sharp Bent Conical 0.40mm (0.016") 1121-0830-P5

1/32" Conical 0.80mm (0.031") 1121-0336-P5

1/16" Chisel 1.60mm (0.063") 1121-0335-P5

1/16" Chisel Long Reach 1.60mm (0.063") 1121-0499-P5

1/8" Chisel 3.20mm (0.125") 1121-0337-P5

1/32" Chisel 0.80mm (0.031") 1121-0359-P5

3/32" Chisel 2.40mm (0.094") 1121-0360-P5

1/16" Chisel, Extended Reach 1.60mm (0.063") 1121-0533-P5

1/64" Bent Conical 0.40mm (0.016") 1121-0363-P5

1/64" Bent Conical 0.40mm (0.016") 1121-0828-P5

1/32" Conical, Extended Reach 0.80mm (0.031") 1121-0527-P5

3/16" Chisel 4.80mm (0.188") 1121-0358-P5

1/16" Chisel (MicroFine) 1.60mm (0.063") 1121-0349-P5

1/16" Chisel, Thermo-Drive 1.60mm (0.063") 1121-0510-P5

1/32" Bent Chisel 0.80mm (0.031") 1121-0361-P5

1/8" Chisel, Thermo-Drive 3.20mm (0.125") 1121-0518-P5

3/32" Chisel, Extended Reach 2.40mm (0.094") 1121-0529-P5

1/16" Bent Chisel, Long Reach 1.60mm (0.063") 1121-0500-P5

1/64" Conical Long Reach 0.40mm (0.016") 1121-0528-P5

Angled Mini-Wave, Fine Pitch 1.80mm (0.07") 1121-0564-P5

Angled Mini-Wave 2.40mm (0.09") 1121-0610-P5

Single-Sided Chisel, Fine Pitch 1.50mm (0.06") 1121-0563-P5

Single-Sided Chisel 3.30mm (0.13") 1121-0406-P5

Mini-Wave 3.30mm (0.13") 1121-0490-P5

Flat Blade 6.60mm (0.25") 1121-0402-P1

Flat Blade 10.2mm (0.40") 1121-0305-P5

24
 PS-90 SMT
Removal Tips
Tips Description Tip Size Part Number

(fig. A) SOIC - 8 (JEDEC) (fig.A) 5.05mm x 5.08mm (0.199" x 0.200") 1121-0390-P1

B
SOIC - 14 (JEDEC) (fig.A) 5.05mm x 8.99mm (0.199" x 0.354") 1121-0391-P1
A

SOIC - 16 (JEDEC) (fig.A) 5.05mm x 10.2mm (0.199" x 0.404") 1121-0392-P1

A
(fig. B) B
Chip Component (fig.B) 3.56mm x 2.03mm (0.14" x 0.08") 1121-0303-P1
A
TSOP (fig.C) 19.333mm x 8.1mm (0.76" x 0.32") 1121-0403-P1
B
(fig. C)
Flat Blade Tip A = 7.6mm (0.3") 1121-0512-P1

Flat Blade Tip A = 10.2mm (0.4") 1121-0514-P1

A
Flat Blade Tip A = 12.7mm (0.5") 1121-0473-P1

Flat Blade Tip A = 17.8mm (0.7") 1121-0416-P1

A
Flat Blade Tip A = 20.3mm (0.8") 1121-0497-P1

Flat Blade Tip A = 25.4mm (1.0") 1121-0448-P1

SMR Pulse Heat

Handpiece Tips
Description Part Number Description Part Number

LF-1 Single Point SMD Soldering Tip 6000-0008-P1 RT 2 20 Pin PLCC ThermoBond Tip 1121-0295-P1

LF-2 Multip Point SMD Soldering Tip 1121-0298-P1 RT 3 28 Pin PLCC ThermoBond Tip 1121-0296-P1

LF-3 Multip Point SMD Soldering Tip 1121-0299-P1 RT 4 44 Pin PLCC ThermoBond Tip 1121-0297-P1

LF-4 Multip Point SMD Soldering Tip 1121-0300-P1 RT 5 Tapered Flat End Resistance Tips 1121-0301-P1

CT-1 Chip Component Tip 1121-0286-P1 RT 7 Flat End Resistance Tips 1121-0006-P1

CT-2 14, 16 Lead SOIC Tip 1121-0271-P1 Thermal Stripper Tips 1121-0003-P1

CT-3 20 Lead SOIC Tip 1121-0270-P1 TS-15 24 Gauge through 18 Gauge Tips 1121-0960-P1

CT-4 24, 28 Lead SOIC Tip 1121-0293-P1 TS-15 18 Gauge Tip 1121-0961-P1

CT-5 SOT Tip 1121-0269-P1 TS-15 20 Gauge Tip 1121-0962-P1

CT-6 Rounded End Auxiliary Heating Tip 1121-0004-P2 TS-15 22 Gauge Tip 1121-0963-P1

RT 1 18 Pin PLCC ThermoBond Tip 1121-0294-P1 TS-15 24 Gauge Tip 1121-0964-P1

Thermopart Coating Removal Tip 6000-0009-P1

25
 SX-100/SX-90
Desoldering Tips
Tips Selection
One of the most important aspects for successful solder
removal is the selection of the proper size tip. There are
several points to keep in mind.

The Inside Diameter (I.D.) of the tip must be large enough to

1  The Outside Diameter (O.D.) of the tip must be slightly smaller
2 
fit over the lead, while providing sufficient room so that air and than the diameter of the pad to prevent tip contact to the board
solder can be drawn through the tip. laminate and minimize the possibility of damage.

Tips Description Diameter Part Number

Thermo-Drive 0.76mm (0.030") I.D. x 2.03mm (0.080") O.D. 1121-0930-P5

Thermo-Drive 1.02mm (0.040") I.D. x 2.29mm (0.090") O.D. 1121-0931-P5

Thermo-Drive 1.52mm (0.060") I.D. x 3.05mm (0.120") O.D. 1121-0932-P5

Thermo-Drive 2.29mm (0.090") I.D. x 5.1mm (0.200") O.D. 1121-0933-P5

Thermo-Drive 4mm (0.16") I.D. x 5.1mm (0.200") O.D. 1121-0951-P5

Thermo-Drive, Flathead (0.050") x (0.090") I.D. x (0.110") x (0.190") O.D. 1121-0934-P5

Extended Reach Thermo-Drive 0.78mm (0.030") I.D. x 2.29mm (0.090") O.D. 1121-0935-P5

Extended Reach Thermo-Drive 1.02mm (0.040") I.D. x 2.54mm (0.10") O.D. 1121-0936-P5

Extended Reach Thermo-Drive 1.52mm (0.060") I.D. x 3.05mm (0.120") O.D. 1121-0937-P5

ThermoMax 0.76mm (0.030") I.D. x 1.91mm (0.075") O.D. 1121-0938-P5

ThermoMax 1.02mm (0.040") I.D. x 2.20mm (0.085") O.D. 1121-0939-P5

ThermoMax 1.52mm (0.060") I.D. x 2.69mm (0.106") O.D. 1121-0940-P5

Precision 0.50mm (0.020") I.D. x 1.79mm (0.070") O.D. 1121-0941-P5

Precision 0.76mm (0.030") I.D. x 2.03mm (0.080") O.D. 1121-0942-P5

Precision 1.02mm (0.040") I.D. x 2.29mm (0.090") O.D. 1121-0943-P5

Precision 1.52mm (0.060") I.D. x 2.79mm (0.110") O.D. 1121-0944-P5

Precision 0.635mm (0.025") I.D. x 1.39mm (0.055") O.D. 1121-0949-P5

Precision 0.635mm (0.025") I.D. x 1.14mm (0.045") O.D. 1121-0950-P5

Flo-D-Sodr 1.52mm (0.060") I.D. X 4.78mm (0.188") O.D. 1121-0945-P5

Flo-D-Sodr, Precision 0.50mm (0.020") I.D. X 1.78mm (0.070") O.D. 1121-0946-P5

Flo-D-Sodr, Precision 0.50mm (0.020") I.D. X 1.78mm (0.070") O.D. 1121-0947-P5

Flo-D-Sodr, Precision 1.02mm (0.040") I.D. X 2.29mm (0.090") O.D. 1121-0948-P5

Not compatible with SX-70 or SX-80

26
 SX-100
Surface Mount Removal Pik-Tips

Tips Description Tip Size A X B Part Number

TSOP-32 8.1mm (0.320") x 12.7mm (0.500") 1121-0566-P1

TSOP-28 8.1mm (0.320") x 19.3mm (0.760") 1121-0567-P1

TSOP-40 9.9mm (0.390") x 19.3mm (0.760") 1121-0568-P1

A B

TSOP-56 14.2mm (0.560") x 19.3mm (0.760") 1121-0569-P1

TQFP-28 8.2mm (0.322") x 8.23mm (0.3220") 1121-0571-P1

TQFP-32 8.7mm (0.344") x 8.7mm (0.344") 1121-0572-P1

TQFP-52 12mm (0.472") x 12mm (0.472") 1121-0573-P1

B
A TQFP-40 12mm (0.472") x 12mm (0.472") 1121-0574-P1

TQFP-80 13.2mm (0.520") x 13.2mm (0.520") 1121-0575-P1

TQFP-80/100 15.3mm (0.604") x 15.3mm (0.604") 1121-0576-P1

PQFP-80/100 16.8mm (0.660") x 22.9mm (0.900") 1121-0603-P1

TQFP-144 21.6mm (0.850") x 21.6mm (0.850") 1121-0604-P1

TQFP-112 22.1mm (0.870") x 22.3mm (0.870") 1121-0605-P1

27
 TT-65 SMT
Removal Tips

Chip Removal Tips Description Tip Size Part Number

SOIC, SOJ, SIMMs A=7.6mm (0.3") 1121-0512-P1

SOIC, SOJ, SIMMs A=10.2mm (0.4") 1121-0514-P1

SOIC, SOJ, SIMMs A=12.7mm (0.5") 1121-0473-P1

A
SOIC, SOJ, SIMMs A=17.8mm (0.7") 1121-0416-P1

SOIC, SOJ, SIMMs A=20.3mm (0.8") 1121-0497-P1

SOIC, SOJ, SIMMs A=25.4mm (1.0") 1121-0448-P1

A A

Chip Component A=0.76mm (0.03") 1121-0398-P1

Chip Component A=2.0mm (0.08") 1121-0313-P1

Chip Component A=4.1mm (0.16") 1121-0399-P1

Chip Component, Small SOIC A=6.4mm (0.25") 1121-0401-P1

Thin-Walled Chip Component A=0.76mm (0.03") 1121-0520-P1

Thin-Walled Chip Component A=2.0mm (0.08") 1121-0521-P1

1/64" Angled Fine Point Conical A=0.43mm (0.017") 1121-0517-P1

PLCC Removal Tips Description Tip Size A X B Part Number

PLCC-20 6.86mm x 6.86mm (0.27" x 0.27") 1121-0316-P1

PLCC-28 9.4mm x 9.4mm (0.37" x 0.37") 1121-0317-P1

A B
PLCC-32 12.2mm x 9.65mm (0.48" x 0.38") 1121-0352-P1

PLCC-44, PQFP-84 14.5mm x 14.5mm (0.57" x 0.57") 1121-0318-P1

PLCC-52, PQFP-100 17.0mm x 17.0mm (0.67" x 0.67") 1121-0319-P1

PLCC-68, PQFP-132 21.9mm x 21.9mm (0.86" x 0.86") 1121-0320-P1

PLCC-84, PQFP-160 26.9mm x 26.9mm (1.06" x 1.06") 1121-0321-P1

Thin-Walled Surface Mount
Description Tip Size A X B Part Number
Removal Tips

6.6mm x 6.6mm (0.26" x 0.26") 1121-0417-P1

Removal Tips for Motorola Pager
A LCCC Packages and Small,
B
Fine-Pitch PQFPs
Wall thickness = 0.025” 9.16mm x 8.89mm (0.40" x 0.35") 1121-0425-P1
(standard height = 0.275”)

LCC Removal Tips Description Tip Size A X B Part Number

8.89mm x 6.35mm (0.35" x 0.25") 1121-0452-P1

Removal Tips for LCC Packages
A B and Small, Fine-Pitch PQFPs
Wall thickness = 0.635mm (0.025”) 21.6mm 21.6mm (0.85" x 0.85") 1121-0455-P1
(reduced height = 0.2” for high mass boards)

28
 TJ-70 / TJ-85
Hot Jet Nozzles

TJ-70 Hot Jet Tips

Tips Description Tip Size A x B Part Number

Small, Straight, Single Jet Tip 0.060" I.D. 1121-0366-P1

Small, Curved, Single Jet Tip 0.060" I.D. 1121-0338-P1

SOIC Tip (dual-jet) A = 4.32mm (0.17") 1121-0330-P1

A = 7.11mm (0.28") B = 1.88mm (0.074") 1121-0365-P1

Flat End Tip
A = 6.10mm (0.24") B = 1.88mm (0.074") 1121-0371-P1

TJ-85 Hot Jet Nozzles

Tips Description Tip Size Part Number

Round Nozzle 1.5mm (.06") Inner diameter 1259-0129-P1

Round Nozzle, Bent 60 degrees 1.5mm (0.6") Inner diameter 1259-0130-P1

6.1mm x 1.9mm (.24" x .074")

Flat Jet Nozzle 1259-0131-P1
Inner flow dimensions

29
 PACE provides innovative solutions, products and training for the assembly, rework, repair and testing of printed circuit
boards. PACE’s unique capabilities and evolving vision have provided universal solutions to thru-hole and surface-mount
assembly and rework problems for the most advanced electronics. Our strong commitment and history of achievement has
resulted in an unparalleled range of Assembly, Repair and Fume Extraction systems to meet your company’s needs whether
worldwide working to ISO-9001, industrial, military or your own internal specifications. Whatever the challenge, PACE stands ready to
provide the best, cost-effective solution for you.

Solder & Desolder Stations

SMR WJS 100 ST 50 ST 70 ST 65 ST 115

Fume Extraction

Arm-Evac 50 Arm-Evac 105 Arm-Evac 200 Arm-Evac 250

Rework & Repair Systems

ST 325 ST 350
MBT 250 MBT 350

Pre-heaters & Process Monitors

ST 400 ST 450 ST 1600 Tip Temperature Monitor PM 200

Area Array (BGA) Rework Systems

IR 1000
TF 2700 TF 1700 IR 3000
 Solutions and systems for soldering, rework and repair of electronics

A Worldwide Commitment
With offices worldwide, PACE is a recognized world leader in the development of solutions for the assembly and
repair of highly advanced electronics. Our expertise extends back to the dawn of the modern electronics industry. In
1958, PACE introduced training programs for the repair of printed wire assemblies and soon after, revolutionized the
industry by creating the first self-contained vacuum desoldering system.

Today, PACE continues to provide innovative solutions, products and training for the rework, repair and testing of
printed circuit assemblies. Our unique capabilities and evolving vision have provided universal solutions for thru-hole
and surface mount assembly and rework problems for the most advanced electronics.

Additionally, PACE manufactures Fume Extraction Systems to reduce exposure to harmful particulates and gases
created from hand soldering operations. PACE Fume Extraction Systems effectively remove these contaminants from
the worker’s breathing zone thereby reducing or eliminating health risks and improving productivity.

Our strong commitment and history of achievement has resulted in an unparalleled range of Assembly, Repair and
Fume Extraction solutions to meet your needs whether working to ISO-9001, industrial, military or your own internal
specifications. Whatever the challenge, PACE stands ready to help you set a new standard.

The following are trademarks and/or service marks of PACE, Incorporated, Southern Pines, NC USA:

Arm-Evac®, Cir-Kit®, ConducTweez™, Flo-D-Sodr®, HandiPik™, IntelliHeat®, LapFlo™, Mini-Wave®, MiniTweez®, PACE®, PACE EUROPE®, PACE WORLDWIDE®,
PACENTER®, Pik-Tip®, PikVac™, Redi-Rak™, ResisTweez™, SensaTemp®, SMR™, Snap-Vac®, SodrTek®, Sodr-X-Tractor®, StripTweez™, Thermo-Drive®,
ThermoFlo®, ThermoJet®, ThermoPik™, ThermoTweez®, and VisiFilter™.

PACE products meet or exceed all applicable military or civilian EOS/ESD, temperature stability and other specifications, including MIL-STD-2000,
ANSI/J-STD001, IPC 7711, IPC 7721 and IPC-A-610.

[Link]

PACE Worldwide PACE Europe Limited

255 Air Tool Drive 11 Holdom Avenue
Southern Pines, NC 28387 Bletchley, Milton Keynes,
Buckinghamshire, MK1 1QU (UK)
phone [Link]
fax 910.695.1594 phone +44 1908 277666
fax +44 1908 277777

P/N: 5400-0140 02/12