COPYRIGHTED-CUSTOMER INFORMATION DRAWING 1 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 2 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 3 COPYRIGHTED-CUSTOMER INFORMATION DRAWING

QTY ITEM NO. DESCRIPTION PART NO.

5 1 1 DRUM,HOIST,WELD ASSY,70 PD S064255
1 2 SPIDER,MACH S004509
1 3 GEAR,DRUM,HOIST E020030-01
1 4 RETAINER,BRG,WELD & MACH S004513
2 5 BRG,TAPER,18.875ID 26960668
2 6 HOUSING,BRG,HOIST DRUM SHAFT S004506
4 2 7 SPACER,DRUM,HOIST MACHY S004510
4
1 8 RETAINER,BRG,WELD & MACH S004504
1 9 SEAL,LABYRINTH S031798
1 10 RETAINER,BRG,WELD & MACH S031799
1 11 RETAINER PL,DRUM HOIST S031801
4 12 O-RING,25.5 ID X .25W 68148428
2 13 ADAPTER,LUBE,HEX,2.25x3.5 549991-01
4 14 SHIM PACK S004520
1 15 SEAL,2.00 SHAFTx2.686 HSGx.375 72069255
COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

FRONT OF MACHINE 12 16 SCR,HEX,1.5x4,UNC,GR 5,DRILLED 522039-17
2 17 PLUG,PIPE,SQ HD,.25,6000# 20765600
2 18 PLUG,PIPE,HEX CSK,.25 20765700
F.S. F.S. 6 19 SCR,HEX,1x16,UNC,GR 5 03302080
8-REQ'D EQUALLY SPACED 34 31 29 30 26 2 20 ELBOW,PIPE,STR,.25x90DEG 20207250
SEE NOTE 1
N.S. N.S. 2 21 BSHG,PIPE,.25x.125 20015340
2 22 VENT,AIR,.125MPTF,#301370 57073700
F.S. F.S. 12 23 NUT,HEX,FULL,HVY,1,UNC 02716050
F.S. 12 24 WASHER,LOCK,1 03962000
28 30 29 31 34 32-REQ'D
36-REQ'D 34 L SEE NOTE 2 6 25 SCR,HEX,1x17,UNC,GR 5 03302090
31 29 30 27 N.S. N.S.
SEE NOTE 3 8 26 BOLT,BODY FIT 1.75x8.25 B005719-01
N.S. N.S. N.S. 13
A2 F.S. F.S.
36
32
27
28
BOLT BODY FIT,1.75x7.25 UNC
SCR,CAP1.75x9 WITH END DRILLED
B006876-01
S006598
19 24 23 76 29 NUT,HEX,HVY,1.75,UNC,GR 8 02722060
76 30 WASHER,FLAT,1.75,HARDENED 03952750
N.S.
ASSEMBLE BEARING HOUSING 76 31 PIN,COTTER,.25x2.5 03119200
WITH PIPE PLUG TOWARDS 18 1 32 WIRE, LOCK, #12 84200000
FRONT OF MACHINE. 2 3
TYP (2) PLACES. 1 33 SOLVENT,CLEANING 87653256
REF: THERMOCOUPLE 5 34 COMPOUND,THREAD LOCKING 82833862
5 8 SEE NOTE 8 5
1 35 SEAL,LABYRINTH S004507
22 4 36 WASHER,CONICAL,27MM MP601246
3 4 37 SCR,HEX,1x4.75,UNC,GR 8 03301485
21 24 2 38 PL,.75 S064250
L 13

6 23
1 B2 4 39 ROUND,2.5 S064126

20 6 24
19 6
23 13 L
25

22 22

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

21 21

20 20
149.57
REF

8
10
17

17

SEE NOTE 7
6 TYP 2 PLACES 6

ROPE ANCHOR 2 PLCS

SEE NOTE 8
17

148.11
REF
COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

A2 REVISION DATA REISSUE DATE 04-21-2009

NOTES: SOLIDWORKS

2009 201 8177

DRAWING
1. PC. MK. 26
1.75 BODY FIT BOLTS - CLEAN THREADS WITH SOLVENT ITEM #33 THEN LUBRICATE THREADS WITH LOCTITE ITEM #34 AND TORQUE TO 1700 FT-LB. THIS DOCUMENT IS PROTECTED UNDER APPLICABLE COPYRIGHT LAWS TO THE EXTENT AVAILABLE.
ANY UNAUTHORIZED AND UNLAWFUL REPRODUCTION, DISTRIBUTION OR OTHER USE SHALL BE

ITEM 1 WAS S031789, GRAPHICAL UPDATE.

SEE NOTE 6 SUBJECT TO LIABILITY. C 2005 Bucyrus International, Inc. ALL RIGHTS RESERVED.
2. PC. MK. 28 ALL DIMENSIONS IN INCHES-UNLESS OTHERWISE SPECIFIED
1.75-UNC GR.8 CAP SCREW - CLEAN THREADS WITH SOLVENT ITEM #33 THEN LUBRICATE THREADS WITH LOCTITE ITEM #34 AND TORQUE TO 3740 FT-LB.

ECN
MACHINING TOLERANCES-UNLESS OTHERWISE SPECIFIED
1. 2 PLACE DECIMAL DIMENSIONS .01 FOR EACH 12 MAX ± .09

3. PC. MK. 27 2. 3 PLACE DECIMAL DIMENSIONS .005 UP TO 36, .010 OVER 36

04-21-2009
3. CONCENTRICITY OF CYLINDRICAL SURFACES = .010 T.I.R. Bucyrus
1.75 BODY FIT BOLTS - CLEAN THREADS WITH SOLVENT ITEM #33 THEN LUBRICATE THREADS WITH LOCTITE ITEM #34 AND TORQUE TO 3740 FT-LB. 4. PARALLELISM, SQUARENESS, OR ANGULARITY BETWEEN SURFACES
AND/OR HOLE CENTERLINES 0 7' (.002 INCH/INCH) R International, Inc.
FABRICATING TOLERANCES-UNLESS OTHERWISE SPECIFIED
4. FOR SHIMMING INSTRUCTIONS FOR ITEMS #14 SEE DRAWING #648124. 1. MATERIAL THICKNESS
A. LESS THAN .12
DIMENSIONS
0 TO 36
TOLERANCE
.03
OVER 36 .06

DATE
B. .12 TO .50 0 TO 36 .06
5. SEE SHEET 2 FOR SECTION VIEW A2-A2. C. .50 TO 1.00
OVER 36
0 TO 36
.12
.09 DESCRIPTION
OVER 36
0 TO 36
.19
.19 DRUM,HOIST,SHIP ASSY,70 PD
6. USE MATCH MARK HOLES TO ALIGN DRUM TO SPIDER AND SPIDER TO GEAR.
D. OVER 1.00

MBS
OVER 36 .25 REF DWGS
2. BENT ANGLES 1 (.017 IN/IN) FOR EACH .37 OF MATERIAL S006620, S022468
THICKNESS (MAX 3 ) FIN WGT
MODEL UNIT
7. LIFTING LUGS ARE FOR MATERIAL HANDLING PURPOSES. LUGS TO BE CUT OFF AND AREA TO BE GROUND FLUSH AT FIELD ASSEMBLY. WELDMENT TOLERANCES-UNLESS OTHERWISE SPECIFIED 495 1300 (LBS) 64110
DET DATE

BY
1. DIMENSION MATERIAL THICKNESS TOLERANCE
MAGUIRE P. 04-07-2005 REV

DESCRIPTION
8. DO NOT APPLY PAINT,COATINGS OR ANY PROTECTANTS TO GROOVES ON FINISHED DRUM, ROPE ANCHORS MUST BE PAINTED.
A. UP TO 36" UP TO 1"
1" AND GREATER
UP TO 1"
.06
.12
.12
ENG
CONTACT TARNOWSKI B. DWG
SIZE E 5

5
B. 36" TO 10'

S031797
1" AND GREATER .19 NO. SHEET
.19

1 OF 2
C. 10' TO 30' UP TO 1"

REV
1" AND GREATER .25
D. OVER 30' ALL .25

COPYRIGHTED-CUSTOMER INFORMATION DRAWING 1 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 2 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 3 COPYRIGHTED-CUSTOMER INFORMATION DRAWING
 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 1 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 2 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 3 COPYRIGHTED-CUSTOMER INFORMATION DRAWING

123.12
REF

19.00 46.50 57.62

4 REF REF REF 4
CL GEAR

27 30 29 31 34
COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

SEE SHEET 1
NOTE3

CL DRUM GROOVES
1

CL BEARING
24 CL BEARING

23 9 38
13 L 37
L 13 6 37

36 36
35 10
6
39 39
19
25

5 5
20 21 22 14 SEE SHEET 1
NOTE 4

22 21 20
15
CL DRUM

4 11

32 16 16 32

SEE SHEET 1 14

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

NOTE 4

5
5

12
12 7
DETAIL B2
TYP 2 PLACES
7

26 30 29 31 34
6 SEE SHEET 1 6
NOTE 1

10.50
REF

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

COPYRIGHTED-CUSTOMER INFORMATION DRAWING

.50
REF .50
REF

60.250
REISSUE DATE 04-21-2009
REF
SOLIDWORKS
DRAWING
112.61
REF THIS DOCUMENT IS PROTECTED UNDER APPLICABLE COPYRIGHT LAWS TO THE EXTENT AVAILABLE.
ANY UNAUTHORIZED AND UNLAWFUL REPRODUCTION, DISTRIBUTION OR OTHER USE SHALL BE
SUBJECT TO LIABILITY. C 2001 Bucyrus International, Inc. ALL RIGHTS RESERVED.

SECTION A2-A2
DESCRIPTION
DRUM,HOIST,SHIP ASSY,70 PD
Bucyrus DWG SIZE REV
R International, Inc. E 5

S031797
NO. SHEET

2 OF 2
COPYRIGHTED-CUSTOMER INFORMATION DRAWING 1 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 2 COPYRIGHTED-CUSTOMER INFORMATION DRAWING 3 COPYRIGHTED-CUSTOMER INFORMATION DRAWING