ISCO HDPE Product Catalog

High-Density
HDPE Pipe
Polyethylene Pipe
Introduction

ISCO Industries, LLC is the largest high-density polyethylene pipe distributor in North
America. ISCO can serve your needs anywhere in the USA and internationally. ISCO
offers a complete package of HDPE piping products. Butt fusion machines are offered for
sale or rental. Fusion technicians are available to provide on-site training or assistance to
your project. Please call 1-800-345-ISCO for all your HDPE piping needs.

Some of The Characteristics of HDPE Pipe are:

Economical Flexible and Coilable

Corrosion Resistant Heat Fused

Zero Leak-Rate Mechanically Joined (As Needed)

Hydraulically Smooth Strong and Ductile

Fatigue and Surge Resistant Weather Resistant

Long Design Life Impact Resistant

Tappable Freeze Resistant

Chemically Resistant Durable

Easily Installed Abrasion Resistant

Small to Large Diameters Inert

Non-Toxic, Non-Tasting Self Restrained Pipe (Monolithic)

Lightweight Listed and Approved

Reliable

1-800-345-ISCO
[Link]
10 © Copyright 2009 ISCO Industries, LLC. All Rights Reserved.
ISCO HDPE Product Catalog

Important Standards for High Density Polyethylene (HDPE) Pipe

Standards important for HDPE pipe relate to the resin the pipe is made from and the
standards related to manufacturing sizes and tolerances. The American Society of Testing
Materials (ASTM) standard for resin from which the pipe is made is ASTM D 3350-05,
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials. This standard
defines the physical properties of the resin that the pipe is made from.
Pipe dimensions and manufacturing requirements:
ASTM F 714-05 Standard Specification for Polyethylene (PE) Pipe (SDR-PR) Based on
Outside Diameter. This standard is used for most large diameter HDPE pipe (4” to 63”)
applications other than gas pipe.
HDPE Pipe
ASTM D 2513-05 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and
Fittings. Polyethylene pipe and other plastic for natural gas distribution are described in
great detail in this standard.
ASTM D 3035-03a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR)
Based on Controlled Outside Diameter. Most HDPE water tubing (1/2 inch to 3”) is made
to the dimensions in this standard. While pipe sizes up to 24” are provided, very little large
diameter pipe is made to this standard.
Installation Standards:
ASTM D 2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for
Sewers and Other Gravity Flow Applications
ASTM D 2774-04 Standard Practice for Underground Installation of Thermoplastic Pressure
Piping
ASTM F 1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement
of Polyethylene Pipe or Conduit under Obstacles, Including River Crossings
ASTM F 585-94 Standard Practice for Insertion of Flexible Polyethylene Pipe into Existing
Sewers
American Water Works Association Standards
ANSI/AWWA C 901-2005 Polyethylene Pressure Pipe and Tubing, .5 in (13 mm) Through 3
in. (76 mm) for Water Services
ANSI/AWWA C 906-2006 Polyethylene Pipe and Fittings, 4 in (100 mm) Through 63 In
(1,575 mm) for Water Distribution
Pipe Joining Standards:
ASTM F 2620 – Standard Practice for Heat Fusion of Polyethylene Pipe and Fittings
ASTM D 2657 – Standard Practice of Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM F 1290 – Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
Fitting Standards
ASTM D 3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic
Fittings for Butt Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe
and Tubing
ASTM F 1055 Standard Specification for Electrofusion Fittings for Outside Diameter
Controlled Polyethylene Pipe and Tubing 1-800-345-ISCO
[Link]
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved. 11
 Specifications for HDPE Pipe
The physical properties of high-density polyethylene pipe are described using ASTM D 3350-
05, “Standard Specification for Polyethylene Plastic Pipe and Fittings Materials”. Recently
this standard was changed. The two key areas changed are, density and slow crack growth.
In the 05 version, the cell classifications for density were increased from four cells to seven
cells defining the density ranges for various resins.

New high performance bimodal resins, PE 4710 resins, have higher PENT test values. Slow
crack grow properties can now be defined using eight cells.

HDPE Pipe As of December 2006, most HDPE pipe is made from resin with a cell classification of PE
345464C. The pipe is labeled as PE3408/3608. The physical properties for PE 345464C are:

PROPERTY VALUE SPECIFICATION UNIT NOMINAL Value

_____________________________________________________________________

Material Designation PPI / ASTM PE 3408/3608

Cell Classification ASTM D 3350 345464C
Density (3) ASTM D 1505 g/cm3 0.941-943
Melt Index (4) ASTM D 1238 gm/ 10 min 0.05 -.11
Flexural Modulus (5) ASTM D 790 psi 110,000 to 140,000
Tensile Strength (4) ASTM D 638 psi 3,200
Slow Crack Growth
ESCR ASTM D 1693 hours in 100% igepal >5,000
PENT (6) ASTM F 1473 hours >100
HDB @ 73 deg F (4) ASTM D 2837 psi 1,600
UV Stabilizer (C) ASTM D 1603 %C 2 to 2.5%

The density provided is without carbon black. Typical HDPE pipe has a density of .955 to .957 with carbon black.

Types of Polyethylene Pipe

All polyethylene (PE) is not the same. In ASTM D 3350-05, low density PE is defined as hav-
ing a density range of 0.919 to 0.925 g/cc; medium density has a range of 0.926 to 0.940 g/
cc and high density is defined with a range from 0.941 to 0.955. All densities are without
carbon black.

Density influences key properties in polyethylene materials. As the density increases, the
tensile strength increases; also chemical resistance increases.

Medium density PE resins have been used for gas distribution. This original selection was
made based on superior slow crack growth properties of medium density resins. Medium
density pipe is designated as PE 2406 and PE 2708.

Today new bimodal resins are being used in gas distribution because of higher pressure
ratings plus superior slow crack growth. These resins are designated PE 3408, PE 3608, PE
3708, PE 3710 and PE 4710.

1-800-345-ISCO
[Link]
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved.
12
Slow Crack Growth
The Pent test is used to determine stress crack resistance for PE resins. The PENT test is
conducted in accordance with ASTM F 1473, “Standard Test Method for Notch Tensile Test
to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins”. This
test uses a solid sample of material which is notched and tested.

The PENT test is a good test of slow crack growth. Scratches and gouges can cause crack
propagation. Materials with high PENT numbers are less likely to fail because of slow crack
growth.

Traditional PE 3408/3608 resins have PENT test values of about 100 hours. New bimodal res- HDPE Pipe
ins used to make PE 3710 and PE 4710 pipes have values ranging from 600 hours to several
thousand hours.

Physical Properties of PE 4710

HDPE pipe with a designation of PE 4710 is made from resin with a cell classification of PE
445474C or PE 445574C. We suggest using a specification calling for a minimum cell classifi-
cation of PE 445474 C or higher. Both cell classifications can be used if specified in this way.
The pipe is labeled as PE 4710. The physical properties for PE 445474C are provided below:

PROPERTY VALUE SPECIFICATION UNIT NOMINAL Value

Material Designation PPI / ASTM PE 4710

Cell Classification ASTM D 3350 445474 C
Density (4) ASTM D 1505 g/cm3 0.947-955
Melt Index (4) ASTM D 1238 gm/ 10 min <.15
Flexural Modulus (5) ASTM D 790 psi 110,000 to 160,000
Tensile Strength (5) ASTM D 638 psi 3500-4000
Slow Crack Growth
ESCR ASTM D 1693 hours in 100% igepal >5,000
PENT (7) ASTM F 1473 hours >500
HDB @ 73 deg F (4) ASTM D 2837 psi 1,600
UV Stabilizer (C) ASTM D 1603 %C 2 to 2.5 %

The density provided is without carbon black. Typical PE 4710 HDPE pipe has a density of 0.956 to 0.964 with carbon black.

To be called a PE 4710, the pipe and resin has substantiation at 50 years.

1-800-345-ISCO
[Link]
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved. 13
 ISCO HDPE Product Catalog

ISCO HDPE Product Catalog

PE 3608/3408
PE 3608/3408 IPS
IPS HDPE
HDPE Pipe
Pipe Sizes
Sizes
Nominal
3/4" 1" 1 1/4" 1 1/2" 2" 3" 4" 5" 5" 6" 7" 8" 10" 12" 14" 16"
Pressure Size
Rating Actual
1.05" 1.315" 1.66" 1.90" 2.375" 3.50" 4.50" 5.375" 5.563" 6.625" 7.125" 8.625" 10.75" 12.75" 14.00" 16.00"
O.D.

Min. wall 0.150" 0.188" 0.237" 0.271" 0.339" 0.500" 0.643" 0.768" 0.795" 0.946" 1.018" 1.232" 1.536" 1.821" 2.000" 2.286"
Average
0.732" 0.917" 1.157" 1.325" 1.656" 2.440" 3.137" 3.747" 3.878" 4.619" 4.967" 6.013" 7.494" 8.889" 9.760" 11.154"
DR 7 I.D.

HDPE Pipe ( 267psi ) Weight

lb/lf
0.190 0.290 0.460 0.603 0.950 2.060 3.400 4.850 5.200 7.360 8.490 12.480 19.400 27.280 32.900 42.970

HDPE Pipe
Min. wall 0.144" 0.180" 0.227" 0.260" 0.325" 0.479" 0.616" 0.736" 0.762" 0.908" 0.976" 1.182" 1.473" 1.747" 1.918" 2.192"
Average
0.745" 0.933" 1.178" 1.348" 1.685" 2.484" 3.193" 3.814" 3.947" 4.701" 5.056" 6.120" 7.628" 9.047" 9.934" 11.353"
DR 7.3 I.D.
( 254psi ) Weight
0.180 0.280 0.445 0.583 0.911 1.980 3.280 4.680 5.020 7.120 8.230 12.060 18.740 26.360 31.780 41.510
lb/lf
Min. wall 0.117" 0.146" 0.184" 0.211" 0.264" 0.389" 0.500" 0.597" 0.618" 0.736" 0.792" 0.958" 1.194" 1.417" 1.556" 1.778"

Master Page
Average
0.803" 1.005" 1.269" 1.452" 1.816" 2.676" 3.440" 4.109" 4.253" 5.064" 5.447" 6.593" 8.218" 9.747" 10.702" 12.231"
DR 9 I.D.
( 200psi ) Weight
0.150 0.234 0.372 0.490 0.770 1.660 2.750 3.920 4.200 5.932 6.890 10.054 15.680 22.070 26.610 34.750
lb/lf
• Items highlighted in Min. wall 0.095" 0.120" 0.151" 0.173" 0.216" 0.318" 0.409" 0.489" 0.506" 0.602" 0.648" 0.784" 0.977" 1.159" 1.273" 1.455"
Blue indicates standard Average
0.848" 1.062" 1.340" 1.534" 1.917" 2.825" 3.633" 4.339" 4.491" 5.348" 5.752" 6.963" 8.678" 10.293" 11.302" 12.916"
• stocking
Items highlighted
items thatinare DR 11 I.D.
( 160psi ) Weight
more
Blue indicates
readily available.
standard lb/lf
0.130 0.200 0.312 0.410 0.640 1.387 2.300 3.290 3.520 4.990 5.780 8.460 13.140 18.490 22.300 29.120

stocking items that are

• Pressures are based Min. wall --- --- --- --- 0.176" 0.259" 0.333" 0.398" 0.412" 0.491" 0.528" 0.639" 0.796" 0.944" 1.037" 1.185"
more readily available.
on using water at 23°C Average
--- --- --- --- 2.002" 2.950" 3.793" 4.531" 4.689" 5.585" 6.006" 7.271" 9.062" 10.748" 11.801" 13.487"
DR 13.5 I.D.
• (73°F).
Pressures are based ( 128psi ) Weight
--- --- --- --- 0.531 1.160 1.910 2.730 2.920 4.150 4.800 7.030 10.920 15.360 18.520 24.190
on usinginside
• Average water diameter
at 23°C lb/lf

(73°F).
calculated using nomi-
Min. wall --- --- --- --- 0.153" 0.226" 0.290" 0.347" 0.359" 0.427" 0.460" 0.556" 0.694" 0.823" 0.903" 1.032"
Average
• nal
Average
OD and
inside
minimum
diameter DR 15.5 I.D.
--- --- --- --- 2.050" 3.021" 3.885" 4.640" 4.802" 5.719" 6.150" 7.445" 9.280" 11.006" 12.085" 13.812"

wall
calculated
plus 6%using
for usenomi-
in ( 110psi ) Weight
lb/lf
--- --- --- --- 0.470 1.020 1.680 2.400 2.570 3.637 4.210 6.164 9.580 13.480 16.242 21.214
estimating
nal OD andfluid
minimum
flows. Min. wall --- --- --- --- 0.140" 0.206" 0.265" 0.316" 0.327" 0.390" 0.419" 0.507" 0.632" 0.750" 0.824" 0.941"
Actual
wall plus
ID 6%
willfor
vary.
use in Average
estimating fluid flows.
• Other piping sizes or DR 17 I.D.
--- --- --- --- 2.079" 3.064" 3.939" 4.705" 4.869" 5.799" 6.236" 7.549" 9.409" 11.160" 12.254" 14.005"

Actual
DR’s mayIDbe
will vary.
available
( 100psi ) Weight
lb/lf
--- --- --- --- 0.430 0.932 1.540 2.200 2.353 3.340 3.860 5.660 8.880 12.362 14.910 19.470

• upon
Otherrequest.
piping sizes or Min. wall --- --- --- --- --- --- 0.237" 0.283" 0.293" 0.349" 0.375" 0.454" 0.566" 0.671" 0.737" 0.842"
DR’s may be available
• Standard Lengths: Average
--- --- --- --- --- --- 3.998" 4.775" 4.942" 5.886" 6.330" 7.663" 9.551" 11.327" 12.438" 14.215"
upon request.
40’ for 2”-24”
DR 19
( 89psi )
I.D.
Weight
--- --- --- --- --- --- 1.390 1.980 2.120 3.010 3.480 5.100 7.920 11.140 13.430 17.540
• 50’
Standard
for 26”Lengths:
and larger lb/lf

Coils
40’ for
available
2”-24” for 3/4”- Min. wall --- --- --- --- --- --- 0.214" 0.256" 0.265" 0.315" 0.339" 0.411" 0.512" 0.607" 0.667" 0.762"

6”(8”
50’ forby26”
special
and larger
order) DR 21
Average
I.D.
--- --- --- --- --- --- 4.046" 4.832" 5.001" 5.956" 6.406" 7.754" 9.665" 11.463" 12.587" 14.385"
Coils available for 3/4”- ( 80psi ) Weight
--- --- --- --- --- --- 1.262 1.801 1.930 2.740 3.170 4.640 7..21 10.134 12.220 15.960
6”(8” by special order) lb/lf
Min. wall --- --- --- --- --- --- 0.173" 0.207" 0.214" 0.255" 0.274" 0.332" 0.413" 0.490" 0.538" 0.615"
Average
--- --- --- --- --- --- 4.133" 4.937" 5.109" 6.085" 6.544" 7.922" 9.873" 11.710" 12.858" 14.695"
DR 26 I.D.
( 64 psi ) Weight
--- --- --- --- --- --- 1.030 1.470 1.574 2.233 2.582 3.790 5.880 8.270 9.970 13.022
lb/lf
Min. wall --- --- --- --- --- --- 0.138" 0.165" 0.171" 0.204" 0.219" 0.265" 0.331" 0.392" 0.431" 0.492"
Average
--- --- --- --- --- --- 4.206" 5.024" 5.200" 6.193" 6.660" 8.062" 10.049" 11.918" 13.087" 14.956"
DR 32.5 I.D.
1-800-345-ISCO ( 51 psi ) Weight
lb/lf
--- --- --- --- --- --- 0.831 1.190 1.270 1.801 2.083 3.053 4.750 6.671 8.050 10.510

[Link]
1-800-345-ISCO
14 © Copyright 2009 ISCO Industries, LLC. All Rights Reserved.
[Link]
14 © Copyright 2007 ISCO Industries, LLC. All Rights Reserved.
 ISCO HDPE Product Catalog

ISCO HDPE Product Catalog

PE
PE3608/3408
3608/3408IPS
IPSHDPE
HDPEPipe
PipeSizes
Sizes
Nominal
18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 42" 48" 54" 63"
Size Pressure
Actual Rating
18.00" 20.00" 22.00" 24.00" 26.00" 28.00" 30.00" 32.00" 34.00" 36.00" 42.00" 48.00" 54.00" 62.99"
O.D.

2.571" 2.857" 3.143" 3.429" --- --- --- --- --- --- --- --- --- --- Min. wall
Average
12.549" 13.943" 15.337" 16.731" --- --- --- --- --- --- --- --- --- ---
I.D. DR 7
54.370 67.130 80.170 96.680 --- --- --- --- --- --- --- --- --- ---
Weight
lb/lf
( 267psi )
HDPE Pipe
HDPE Pipe
2.466" 2.740" 3.014" 3.288" 3.562" --- --- --- --- --- --- --- --- --- Min. wall
Average
12.773" 14.192" 15.611" 17.030" 18.449" --- --- --- --- --- --- --- --- ---
I.D. DR 7.3
Weight ( 254psi )
52.530 64.850 78.140 93.390 110.769 --- --- --- --- --- --- --- --- ---
lb/lf
2.000" 2.222" 2.444" 2.667" 2.889" 3.111" 3.333" 3.556" --- --- --- --- --- --- Min. wall

Master Page
Average
13.760" 15.289" 16.818" 18.347" 19.876" 21.404" 22.933" 24.462" --- --- --- --- --- ---
I.D. DR 9
Weight ( 200psi )
43.970 54.280 65.412 78.180 92.535 107.312 123.183 140.183 --- --- --- --- --- ---
lb/lf
1.636" 1.818" 2.000" 2.182" 2.364" 2.545" 2.727" 2.909" 3.091" 3.273" --- --- --- --- Min. wall • Items highlighted in
14.531" 16.145" 17.760" 19.375" 20.989" 22.604" 24.218" 25.833" 27.447" 29.062" --- --- --- ---
Average Blue indicates standard
I.D.
Weight
DR 11
( 160psi )
stocking
• Items items that
highlighted in are
36.840 45.490 54.820 65.520 77.440 89.785 103.076 117.285 132.411 148.454 --- --- --- ---
lb/lf more
Blue readilystandard
indicates available.
1.333" 1.481" 1.630" 1.778" 1.926" 2.074" 2.222" 2.370" 2.519" 2.667" 3.111" 3.556" --- --- Min. wall • stocking items
Pressures arethat are
based
15.173" 16.859" 18.545" 20.231" 21.917" 23.603" 25.289" 26.975" 28.661" 30.347" 35.404" 40.462" --- ---
Average more readily available.
on using water at 23°C
I.D. DR 13.5
30.610 37.790 45.550 54.440 64.261 74.522 85.543 97.324 109.905 123.208 167.675 217.895 --- ---
Weight ( 128psi ) • Pressures
(73°F). are based
lb/lf
on using water
• Average at diameter
inside 23°C
1.161" 1.290" 1.419" 1.548" 1.677" 1.806" 1.935" 2.065" 2.194" 2.323" 2.710" 3.097" 3.484" --- Min. wall
(73°F).
calculated using nomi-
Average
15.538" 17.265" 18.991" 20.717" 22.444" 24.170" 25.897" 27.623" 29.350" 31.076" 36.255" 41.435" 46.614" ---
I.D. DR 15.5 • Average
nal ODinside diameter
and minimum
26.849 33.146 40.107 47.731 56.532 65.563 75.264 85.672 96.714 108.424 147.568 192.774 243.921 ---
Weight
lb/lf
( 110psi )
calculated
wall plususing
6% for nomi-
use in
1.059" 1.176" 1.294" 1.412" 1.529" 1.647" 1.765" 1.882" 2.000" 2.118" 2.471" 2.824" 3.176" --- Min. wall
nalestimating
OD and minimum
fluid flows.
Average
wall plus ID
Actual 6% will
for use
[Link]
15.755" 17.506" 19.256" 21.007" 22.758" 24.508" 26.259" 28.009" 29.760" 31.511" 36.762" 42.014" 47.266" ---
I.D. DR 17 estimating fluid flows.
• Other piping sizes or
( 100psi )
24.640 30.420 36.810 43.810 51.856 60.154 69.068 78.557 88.700 99.457 135.372 176.813 223.713 ---
Weight
lb/lf
Actual
DR’s IDmaywill
bevary.
available
0.947" 1.053" 1.158" 1.263" 1.368" 1.474" 1.579" 1.684" 1.789" 1.895" 2.211" 2.526" 2.842" --- Min. wall • Other
uponpiping sizes or
request.
Average DR’s may be available
15.992" 17.768" 19.545" 21.322" 23.099" 24.876" 26.653" 28.429" 30.206" 31.983" 37.314" 42.644" 47.975" --- • Standard Lengths:
I.D. DR 19
upon request.
22.200 27.410 33.162 39.470 46.701 54.189 62.196 70.755 79.865 89.571 121.925 159.198 201.502 ---
Weight ( 89psi ) 40’ for 2”-24”
lb/lf
• Standard Lengths:
50’ for 26” and larger
0.857" 0.952" 1.048" 1.143" 1.238" 1.333" 1.429" 1.524" 1.619" 1.714" 2.000" 2.286" 2.571" 3.000" Min. wall
40’Coils
for 2”-24”
available for 3/4”-
16.183" 17.981" 19.779" 21.577" 23.375" 25.173" 26.971" 28.770" 30.568" 32.366" 37.760" 43.154" 48.549" 56.631"
Average
I.D. DR 21
50’6”(8”
for 26”
by and larger
special order)
20.200 24.940 30.172 35.990 42.486 49.266 56.585 64.370 72.657 81.446 110.874 144.833 183.253 248.550
Weight ( 80psi ) Coils available for 3/4”-
lb/lf
6”(8” by special order)
0.692" 0.769" 0.846" 0.923" 1.000" 1.077" 1.154" 1.231" 1.308" 1.385" 1.615" 1.846" 2.077" 2.423" Min. wall
Average
16.532" 18.369" 20.206" 22.043" 23.880" 25.717" 27.554" 29.391" 31.228" 33.065" 38.575" 44.086" 49.597" 57.854"
I.D. DR 26
Weight ( 64 psi )
16.480 20.350 24.620 29.300 34.648 40.187 46.135 52.494 59.264 66.444 90.393 118.082 149.464 202.810
lb/lf
0.554" 0.615" 0.677" 0.738" 0.800" 0.862" 0.923" 0.985" 1.046" 1.108" 1.292" 1.477" 1.662" 1.938" Min. wall
Average
16.826" 18.695" 20.565" 22.434" 24.304" 26.174" 28.043" 29.913" 31.782" 33.652" 39.260" 44.869" 50.478" 58.881"
I.D. DR 32.5

1-800-345-ISCO
Weight ( 51 psi )
13.300 16.420 19.863 23.640 27.940 32.421 37.196 42.340 47.773 53.581 72.893 95.233 120.556 163.620
lb/lf

1-800-345-ISCO
[Link]
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved. 15
[Link]
© Copyright 2007 ISCO Industries, LLC. All Rights Reserved. 15
 ISCO HDPE
ISCO HDPE Product
Product Catalog
Catalog
PE 3608/3408
PE 3608/3408 DIPS
DIPS HDPE
HDPE Pipe
Pipe Sizes
Sizes

HDPE
Nominal
3" 4" 6" 8" 10" 12" 14" 16" 18"
Pressure Size
Rating Actual

Pipe
3.96" 4.800" 6.90" 9.05" 11.100" 13.20" 15.30" 17.400" 19.500"
O.D.

Min. wall 0.566" 0.686" 0.986" 1.293" 1.586" 1.886" 2.186" 2.486" 2.786"
Average
2.761" 3.346" 4.810" 6.309" 7.738" 9.202" 10.666" 12.130" 13.594"
DR 7 I.D.
( 267psi )
Weight lb/lf 2.620 3.850 7.960 13.960 20.590 29.120 39.120 50.600 63.550
HDPE Pipe Min. wall --- 0.658" 0.945" 1.240" 1.521" 1.808" 2.096" 2.384" 2.671"
Average
--- 3.406" 4.896" 6.422" 7.876" 9.367" 10.857" 12.347" 13.837"
DR 7.3 I.D.
( 254psi )
Weight lb/lf --- 3.720 7.690 13.220 19.890 28.130 37.790 48.880 61.390

Master Page Min. wall 0.440" 0.533" 0.767" 1.006" 1.233" 1.467" 1.700" 1.933" 2.167"
Average
•• Items
Items highlighted
highlighted in in 3.027" 3.669" 5.275" 6.918" 8.485" 10.091" 11.696" 13.301" 14.907"
DR 9 I.D.
Blue indicates standard
Blue indicates standard ( 200psi )
Weight lb/lf 2.120 3.110 6.430 11.070 16.650 23.550 31.640 40.920 51.390
stocking items
stocking items that
that are
are
more readily available.
more readily available.
Min. wall 0.360" 0.436" 0.627" 0.823" 1.009" 1.200" 1.391" 1.582" 1.773"
Average
• Pressures are
• Pressures are based
based DR 11 I.D.
3.197" 3.875" 5.570" 7.306" 8.961" 10.656" 12.351" 14.047" 15.742"

on using water
on using water at at 23°C
23°C ( 160psi )
Weight lb/lf 1.780 2.610 5.390 9.280 13.950 19.730 26.510 34.290 43.070
(73°F).
(73°F). Min. wall 0.293" 0.356" 0.511" 0.6704 0.822" 0.978" 1.133" 1.289" 1.444"
• Average inside
• Average inside diameter
diameter Average
calculated using
calculated using nomi- nomi- DR 13.5 I.D.
3.338" 4.046" 5.816" 7.629" 9.357" 11.127" 12.897" 14.668" 16.438"

nal OD and
nal OD and minimumminimum ( 128psi )
Weight lb/lf 1.480 2.170 4.480 7.710 11.600 16.400 22.030 28.490 35.790
wall plus
wall plus 6% 6% for
for use
use inin
Min. wall 0.255" 0.310" 0.445" 0.5839 0.716" 0.852" 0.987" 1.123" 1.258"
estimating fluid
estimating fluid flows. flows.
Average
Actual ID
Actual ID will
will vary.
vary. DR 15.5 I.D.
3.418" 4.143" 5.956" 7.812" 9.582" 11.395" 13.207" 15.020" 16.833"
( 110psi )
•• Service
Service factors
factors should
should Weight lb/lf 1.299 1.893 3.906 6.723 10.110 14.306 19.210 24.856 31.205
be utilized to compen-
be utilized to compen- Min. wall 0.233" 0.282" 0.406" 0.532" 0.653" 0.776" 0.900" 1.024" 1.059"
sate for
sate for the
the effect
effect ofof liq-
liq- Average
uids other than
uids other than water, water, DR 17 I.D.
3.466" 4.201" 6.040" 7.921" 9.716" 11.554" 13.392" 15.230" 17.255"

and for
and for other
other tempera-
tempera- ( 100psi )
Weight lb/lf 1.190 1.750 3.620 6.230 9.370 13.250 17.800 23.030 28.920
tures.
tures. Min. wall --- 0.229" 0.329" 0.431 0.529" 0.629" 0.729" 0.829" 0.857"
• Other piping
• Other piping sizes
sizes oror Average
DR’s may be available
DR’s may be available DR 21 I.D.
--- 4.315" 6.203" 8.136" 9.979" 11.867" 13.755" 15.643" 17.683"

upon request.
upon request. ( 80psi )
Weight lb/lf --- 1.440 2.970 5.110 7.810 10.870 14.600 18.880 23.710

•• Standard
Standard Lengths:
Lengths: Min. wall --- 0.185" 0.265" 0.3481 0.427" 0.508" 0.588" 0.669" 0.692"
40’ for
40’ for 2”-24”
2”-24” Average
50’ for
50’ for 26”
26” andand larger
larger DR 26 I.D.
--- 4.409" 6.337" 8.312" 10.195" 12.124" 14.052" 15.981" 18.032"

Coils available
Coils available for for 3”-4”
3”-4” ( 64 psi )
Weight lb/lf --- 1.170 2.420 4.170 6.270 8.870 11.910 15.400 19.340

Min. wall --- 0.148" 0.212" 0.2785 0.342" 0.406" 0.471" 0.535" 0.554"
Average
--- 4.487" 6.450" 8.460" 10.376" 12.339" 14.302" 16.265" 18.326"
DR 32.5 I.D.
( 51 psi )
Weight lb/lf --- 0.950 1.950 3.360 5.060 7.150 9.310 12.490 15.610

1-800-345-ISCO
1-800-345-ISCO
[Link]
[Link]
16
16 © Copyright
© Copyright 2009
2007 ISCO
ISCO Industries,
Industries, LLC.
LLC. All
All Rights
Rights Reserved.
Reserved.
ISCO
ISCO HDPE Product Catalog
PE 3608/3408 DIPS HDPE Pipe Sizes

HDPE
HDPE
Nominal
20" 24" 30" 36" 42" 48" 54" 60"
Size Pressure
21.600" 25.800" 32.000" 38.30" 44.50" 50.80" 57.56" 61.61" Actual O.D. Rating

3.086" --- --- --- --- --- --- --- Min. wall
Pipe
Average
15.058" --- --- --- --- --- --- ---
I.D. DR 7
( 267psi )
77.980 --- --- --- --- --- --- --- Weight lb/lf

2.959" 3.534" --- --- --- --- --- --- Min. wall HDPE
HDPE PipePipe
Average
15.327" 18.307" --- --- --- --- --- ---
I.D. DR 7.3
( 254psi )
75.004 109.056 --- --- --- --- --- --- Weight lb/lf

2.400" 2.867" 3.556" --- --- --- --- --- Min. wall
Average
Master Page
16.512" 19.723" 24.462" --- --- --- --- ---
I.D. DR 9 •• Items
Items highlighted
highlighted in in
63.060 91.123 140.183 --- --- --- --- --- Weight lb/lf
( 200psi ) Blue
Blue indicates
indicates standard
standard
stocking
stocking items
items that
thatare
are
1.964" 2.345" 2.909" 3.482" --- --- --- --- Min. wall
more
more readily
readily available.
available.
Average
17.437" 20.828" 25.833" 30.919" --- --- --- ---
I.D. DR 11 •• Pressures
Pressures are are based
based
52.850 76.229 117.285 166.140 --- --- --- --- Weight lb/lf
( 160psi ) on
on using water at
using water at 23°C
23°C
(73°F).
(73°F).
1.600" 1.911" 2.370" 2.837" 3.296" --- --- --- Min. wall
Average
•• Average
Average inside
inside diameter
diameter
18.208" 21.748" 26.975" 32.285" 37.512" --- --- ---
I.D. DR 13.5 calculated
calculated using
using nomi-
nomi-
43.910 63.270 97.324 138.050 186.360 --- --- --- Weight lb/lf
( 128psi ) nal
nal OD
OD andand minimum
minimum
wall
wall plus
plus 6%6% for
for use
useinin
1.394" 1.665" 2.065" 2.471" 2.871" 3.277" --- --- Min. wall
estimating fluid flows.
estimating fluid flows.
Average
18.646" 22.271" 27.623" 33.062" 38.414" 43.852" --- ---
I.D. DR 15.5 Actual
Actual ID ID will
will vary.
vary.
( 110psi )
38.301 55.693 85.672 122.062 164.779 214.710 --- --- Weight lb/lf •• Service
Service factors should
factors should
1.176" 1.518" 1.882" 2.253" 2.618" 2.988" 3.386" --- Min. wall
be
be utilized
utilized to to compen-
compen-
sate
sate for
for the
the effect
effectof ofliq-
liq-
Average
19.106" 22.583" 28.009" 33.524" 38.951" 44.465" 50.382" ---
I.D. DR 17 uids other than water,
uids other than water,
35.490 51.086 78.557 111.550 150.600 196.230 251.945 --- Weight lb/lf
( 100psi ) and
and for
for other
other tempera-
tempera-
tures.
tures.
0.952" 1.229" 1.524" 1.824" 2.119" 2.419" 2.741" 2.934" Min. wall
Average
•• Other
Other piping
piping sizes
sizesoror
19.581" 23.195" 28.770" 34.434" 40.008" 45.672" 51.749" 55.390"
I.D. DR 21 DR’s may be available
DR’s may be available
29.100 41.852 64.370 91.450 123.450 160.880 206.540 236.626 Weight lb/lf
( 80psi ) upon
upon request.
request.
0.769" 0.992" 1.231" 1.473" 1.712" 1.954" 2.214" 2.370" Min. wall
•• Standard
Standard Lengths:
Lengths:
Average
40’
40’ for
for 2”-24”
2”-24”
19.969" 23.696" 29.391" 35.177" 40.872" 46.658" 52.867" 56.586"
I.D. DR 26 50’
50’ for
for 26”
26” and
and larger
larger
23.740 34.107 52.494 74.610 100.750 131.280 168.530 193.070 Weight lb/lf
( 64 psi ) Coils
Coils available
available for
for3”-4”
3”-4”
0.615" 0.794" 0.985" 1.178" 1.369" 1.563" 1.771" 1.896" Min. wall
Average
20.295" 24.117" 29.913" 35.802" 41.597" 47.486" 53.805" 57.591"
I.D. DR 32.5
( 51 psi )
19.160 27.517 42.340 60.200 81.270 105.910 135.970 155.770 Weight lb/lf

1-800-345-ISCO
1-800-345-ISCO
[Link]
[Link]
© Copyright 2007 ISCO Industries, LLC. All Rights Reserved.
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved.
17
17
 ISCO HDPE
ISCO HDPE Product
Product Catalog
Catalog

PE 4710
PE 4710 IPS
IPS HDPE
HDPE Pipe
Pipe Sizes
Sizes
Nominal
1" 1 1/4" 1 1/2" 2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18"
Pressure Size
Rating Actual
1.32" 1.660" 1.90" 2.38" 3.500" 4.50" 5.563" 6.625" 8.625" 10.750" 12.75" 14.00" 16.00" 18.00"
O.D.

Min. wall 0.188" 0.237" 0.271" 0.339" 0.500" 0.643" 0.795" 0.946" 1.232" 1.536" 1.821" 2.000" 2.286" 2.571"
Average

HDPE Pipe
Pipe
0.917" 1.157" 1.325" 1.656" 2.440" 3.137" 3.878" 4.619" 6.013" 7.494" 8.889" 9.760" 11.154" 12.549"

HDPE
DR 7 I.D.
( 336psi ) Weight
0.291 0.463 0.607 0.950 2.060 3.402 5.200 7.374 12.498 19.416 27.312 32.930 43.010 54.435
lb/lf
Min. wall 0.180" 0.227" 0.260" 0.325" 0.479" 0.616" 0.762" 0.908" 1.182" 1.473" 1.747" 1.918" 2.192" 2.466"
Average
0.933" 1.178" 1.348" 1.685" 2.484" 3.193" 3.947" 4.701" 6.120" 7.628" 9.047" 9.934" 11.353" 12.773"
DR 7.3 I.D.
( 320psi ) Weight
0.281 0.450 0.590 0.920 1.990 3.290 5.022 7.130 12.070 18.750 26.380 31.810 41.550 52.580
lb/lf
Min. wall 0.146" 0.184" 0.211" 0.264" 0.389" 0.500" 0.618" 0.736" 0.958" 1.194" 1.417" 1.556" 1.778" 2.000"
•• Items
Items highlighted
highlighted in
in Average
1.005" 1.269" 1.452" 1.816" 2.676" 3.440" 4.253" 5.064" 6.593" 8.218" 9.747" 10.702" 12.231" 13.760"
Blue indicates
Blue indicates standard
standard DR 9 I.D.
stocking items
stocking items that
that are
are ( 252psi ) Weight
lb/lf
0.235 0.374 0.490 0.770 1.664 2.751 4.204 5.963 10.110 15.700 22.085 26.630 34.780 44.020
more readily
more readily available.
available. Min. wall 0.120" 0.151" 0.173" 0.216" 0.318" 0.409" 0.506" 0.602" 0.784" 0.977" 1.159" 1.273" 1.455" 1.636"

•• Pressures
Pressures are are based
based Average
1.062" 1.340" 1.534" 1.917" 2.825" 3.633" 4.491" 5.348" 6.963" 8.678" 10.293" 11.302" 12.916" 14.531"
on using water
on using water at at 23°C
23°C DR 11 I.D.
( 202psi ) Weight
(73°F).
(73°F). lb/lf
0.200 0.314 0.411 0.642 1.395 2.310 3.523 5.000 8.470 13.160 18.510 22.320 29.150 36.890

• Average inside
• Average inside diameter
diameter Min. wall --- --- --- 0.176" 0.259" 0.333" 0.412" 0.491" 0.639" 0.796" 0.944" 1.037" 1.185" 1.333"
calculated using
calculated using nomi- nomi- Average
--- --- --- 2.002" 2.950" 3.793" 4.689" 5.585" 7.271" 9.062" 10.748" 11.801" 13.487" 15.173"
nal OD and minimum
nal OD and minimum
DR 13.5 I.D.
( 161psi ) Weight
wall plus
wall plus 6%
6% for
for use
use inin lb/lf
--- --- --- 0.534 1.160 1.920 2.928 4.152 7.040 10.932 15.380 18.540 24.220 30.651

estimating fluid
estimating fluid flows. flows. Min. wall --- --- --- 0.153" 0.226" 0.290" 0.359" 0.427" 0.556" 0.694" 0.823" 0.903" 1.032" 1.161"
Actual ID
Actual ID will
will vary.
vary. Average
--- --- --- 2.050" 3.021" 3.885" 4.802" 5.719" 7.445" 9.280" 11.006" 12.085" 13.812" 15.538"
DR 15.5 I.D.
•• Service
Service factors
factors should
should ( 139psi ) Weight
--- --- --- 0.470 1.020 1.687 2.580 3.656 6.197 9.626 13.530 16.310 21.300 26.950
be utilized to compen-
be utilized to compen- lb/lf
sate for
sate for the
the effect
effect ofof liq-
liq- Min. wall --- --- --- 0.140" 0.206" 0.265" 0.327" 0.390" 0.507" 0.632" 0.750" 0.824" 0.941" 1.059"
uids other than
uids other than water, water, Average
--- --- --- 2.079" 3.064" 3.939" 4.869" 5.799" 7.549" 9.409" 11.160" 12.254" 14.005" 15.755"
and for
and for other
other tempera-
tempera- DR 17 I.D.
( 126psi ) Weight
tures.
tures. lb/lf
--- --- --- 0.431 0.940 1.550 2.360 3.360 5.690 8.834 12.430 14.983 19.570 24.770

• Other piping
• Other piping sizes
sizes oror Min. wall --- --- --- --- --- 0.214" 0.265" 0.315" 0.411" 0.512" 0.607" 0.667" 0.762" 0.857"

DR’s may be available

DR’s may be available Average
--- --- --- --- --- 4.046" 5.001" 5.956" 7.754" 9.665" 11.463" 12.587" 14.385" 16.183"
upon request.
upon request. DR 21
( 101psi )
I.D.
Weight
--- --- --- --- --- 1.270 1.940 2.750 4.662 7.242 10.190 12.282 16.042 20.304
•• Standard
Standard Lengths:
Lengths: lb/lf

40’ for 2”-24”

40’ for 2”-24” Min. wall --- --- --- --- --- 0.173" 0.214" 0.255" 0.332" 0.413" 0.490" 0.538" 0.615" 0.692"

50’ for
50’ for 26”
26” and
and larger
larger Average
--- --- --- --- --- 4.133" 5.109" 6.085" 7.922" 9.873" 11.710" 12.858" 14.695" 16.532"
DR 26 I.D.
Coils available for
Coils available for 3/4”- 3/4”- ( 81 psi ) Weight
--- --- --- --- --- 1.035 1.582 2.250 3.800 5.910 8.312 10.022 13.090 16.570
6”(8” by special
6”(8” by special order) order) lb/lf
Min. wall --- --- --- --- --- 0.138" 0.171" 0.204" 0.265" 0.331" 0.392" 0.431" 0.492" 0.554"
Average
--- --- --- --- --- 4.206" 5.200" 6.193" 8.062" 10.049" 11.918" 13.087" 14.956" 16.826"
DR 32.5 I.D.
( 64 psi ) Weight
--- --- --- --- --- 0.835 1.280 1.811 3.070 4.770 6.710 8.090 10.561 13.370
1-800-345-ISCO
1-800-345-ISCO
lb/lf

[Link]
[Link]
18
18 ©Copyright
© Copyright2009
2007ISCO
ISCOIndustries,
Industries,LLC.
LLC. All
AllRights
RightsReserved.
Reserved.
 ISCO HDPE
ISCO HDPE Product
Product Catalog
Catalog

PE 4710
PE 4710 IPS
IPS HDPE
HDPE Pipe
Pipe Sizes
Sizes
Nominal
20" 22" 24" 26" 28" 30" 32" 34" 36" 42" 48" 54" 63"
Size Pressure
Actual Rating
20.00" 22.00" 24.00" 26.00" 28.00" 30.00" 32.00" 34.00" 36.00" 42.00" 48.00" 54.00" 62.99"
O.D.

2.857" 3.143" 3.429" --- --- --- --- --- --- --- --- --- --- Min. wall
Average
13.943" 15.337" 16.731" --- --- --- --- --- --- --- --- --- ---

67.203 80.591 95.916 --- --- --- --- --- --- --- --- --- ---
I.D.
Weight
lb/lf
DR 7
( 336psi ) HDPE Pipe
2.740" 3.014" 3.288" 3.562" --- --- --- --- --- --- --- --- --- Min. wall
Average
14.192" 15.611" 17.030" 18.449" --- --- --- --- --- --- --- --- ---
I.D. DR 7.3
Weight ( 320psi )
64.910 78.550 93.480 110.769 --- --- --- --- --- --- --- --- ---
lb/lf
2.222" 2.444" 2.667" 2.889" 3.111" 3.333" 3.556" --- --- --- --- --- --- Min. wall

--- --- --- --- ---

Average •• Items
Items highlighted
highlighted in
in
15.289" 16.818" 18.347" 19.876" 21.404" 22.933" 24.462" ---
I.D. DR 9 Blue indicates
Blue indicates standard
standard
54.342 65.754 78.250 92.535 107.312 123.183 140.183 --- --- --- --- --- ---
Weight
lb/lf
( 252psi )
stocking items
stocking items that
that are
are
more readily
more readily available.
available.
1.818" 2.000" 2.182" 2.364" 2.545" 2.727" 2.909" 3.091" 3.273" --- --- --- --- Min. wall

16.145" 17.760" 19.375" 20.989" 22.604" 24.218" 25.833" 27.447" 29.062" --- --- --- ---
Average •• Pressures
Pressures are are based
based
I.D. DR 11 on using water
on using water at at 23°C
23°C
Weight ( 202psi )
45.541 55.105 65.580 77.440 89.785 103.076 117.285 132.411 148.454 --- --- --- ---
lb/lf (73°F).
(73°F).
1.481" 1.630" 1.778" 1.926" 2.074" 2.222" 2.370" 2.519" 2.667" 3.111" --- --- --- Min. wall • Average inside
• Average inside diameter
diameter
16.859" 18.545" 20.231" 21.917" 23.603" 25.289" 26.975" 28.661" 30.347" 35.404" --- --- ---
Average calculated using
calculated using nomi- nomi-
I.D. DR 13.5 nal OD and minimum
nal OD and minimum
Weight ( 161psi )
37.840 45.790 54.490 64.261 74.522 85.543 97.324 109.905 123.208 167.675 --- --- ---
lb/lf wall plus
wall plus 6%
6% for
for use
use inin
1.290" 1.419" 1.548" 1.677" 1.806" 1.935" 2.065" 2.194" 2.323" 2.710" 3.097" 3.484" --- Min. wall estimating fluid
estimating fluid [Link].
Average Actual ID
Actual ID will
will vary.
vary.
17.265" 18.991" 20.717" 22.444" 24.170" 25.897" 27.623" 29.350" 31.076" 36.255" 41.435" 46.614" ---
I.D. DR 15.5
33.280 39.712 47.920 56.532 65.563 75.264 85.672 96.714 108.424 147.568 192.774 243.921 ---
Weight ( 139psi ) •• Service
Service factors
factors should
should
lb/lf be utilized to compen-
be utilized to compen-
1.176" 1.294" 1.412" 1.529" 1.647" 1.765" 1.882" 2.000" 2.118" 2.471" 2.824" 3.176" --- Min. wall sate for
sate for the
the effect
effect ofof liq-
liq-
17.506" 19.256" 21.007" 22.758" 24.508" 26.259" 28.009" 29.760" 31.511" 36.762" 42.014" 47.266" ---
Average uids other than
uids other than water,water,
I.D.
Weight
DR 17
( 126psi )
and for
and for other
other tempera-
tempera-
30.580 37.000 44.031 51.856 60.154 69.068 78.557 88.700 99.457 135.372 176.813 223.713 ---
lb/lf tures.
tures.
0.952" 1.048" 1.143" 1.238" 1.333" 1.429" 1.524" 1.619" 1.714" 2.000" 2.286" 2.571" 3.000" Min. wall • Other piping
• Other piping sizes
sizes oror
17.981" 19.779" 21.577" 23.375" 25.173" 26.971" 28.770" 30.568" 32.366" 37.760" 43.154" 48.549" 56.631"
Average DR’s may be available
DR’s may be available
I.D. DR 21
Weight ( 101psi ) upon request.
upon request.
25.070 30.330 36.100 42.486 49.266 56.585 64.370 72.657 81.446 110.874 144.833 183.253 249.570
•• Standard
Standard Lengths:
Lengths:
lb/lf
0.769" 0.846" 0.923" 1.000" 1.077" 1.154" 1.231" 1.308" 1.385" 1.615" 1.846" 2.077" 2.423" Min. wall 40’ for 2”-24”
40’ for 2”-24”
18.369" 20.206" 22.043" 23.880" 25.717" 27.554" 29.391" 31.228" 33.065" 38.575" 44.086" 49.597" 57.854"
Average 50’ for
50’ for 26”
26” and
and larger
larger
I.D. DR 26
Weight ( 81 psi ) Coils available for
Coils available for 3/4”- 3/4”-
20.453 24.750 29.452 34.570 40.187 46.135 52.494 59.264 66.444 90.393 118.082 149.464 203.630
lb/lf 6”(8” by special
6”(8” by special order) order)
0.615" 0.677" 0.738" 0.800" 0.862" 0.923" 0.985" 1.046" 1.108" 1.292" 1.477" 1.662" 1.938" Min. wall
Average
18.695" 20.565" 22.434" 24.304" 26.174" 28.043" 29.913" 31.782" 33.652" 39.260" 44.869" 50.478" 58.881"
I.D. DR 32.5
Weight ( 64 psi )
16.501 19.970 23.762 27.940 32.421 37.196 42.340 47.773 53.581 72.893 95.233 120.556 164.280
1-800-345-ISCO
lb/lf

[Link]
© Copyright
© Copyright 2009
2007 ISCO
ISCO Industries,
Industries, LLC.
LLC. All
All Rights
Rights Reserved.
Reserved. 19
19
 ISCO HDPE Product Catalog
PE 4710 DIPS HDPE Pipe Sizes
Nominal
4" 6" 8" 10" 12" 14" 16"
Pressure Size
Rating Actual
4.80" 6.90" 9.05" 11.10" 13.20" 15.30" 17.40"
O.D.

Min. wall 0.686" 0.986" 1.293" 1.586" 1.886" 2.186" 2.486"

Average
3.346" 4.810" 6.309" 7.738" 9.202" 10.666" 12.130"
DR 7 I.D.
( 336psi )
Weight lb/lf 3.871 7.999 13.760 20.700 29.274 39.329 50.866

HDPE Pipe Min. wall 0.658" 0.945" 1.240" 1.521" 1.808" 2.096" 2.384"
Average
3.406" 4.896" 6.422" 7.876" 9.367" 10.857" 12.347"
DR 7.3 I.D.
( 320psi )
Weight lb/lf 3.740 7.730 13.290 20.000 28.280 37.990 49.130

Min. wall 0.533" 0.767" 1.006" 1.233" 1.467" 1.700" 1.933"

Average
3.669" 5.275" 6.918" 8.485" 10.091" 11.696" 13.301"
• Items highlighted in DR 9 I.D.
( 252psi )
Blue indicates standard Weight lb/lf 3.130 6.470 11.130 16.740 23.671 31.802 41.132
stocking items that are
Min. wall 0.436" 0.627" 0.823" 1.009" 1.200" 1.391" 1.582"
more readily available.
Average
3.875" 5.570" 7.306" 8.961" 10.656" 12.351" 14.047"
• Pressures are based DR 11 I.D.
on using water at 23°C ( 202psi )
Weight lb/lf 2.623 5.420 9.325 14.030 19.840 26.652 34.470
(73°F).
Min. wall 0.356" 0.511" 0.670" 0.822" 0.978" 1.133" 1.289"
• Average inside diameter Average
calculated using nomi- DR 13.5 I.D.
4.046" 5.816" 7.629" 9.357" 11.127" 12.897" 14.668"

nal OD and minimum ( 161psi )

Weight lb/lf 2.180 4.504 7.750 11.660 16.483 22.150 28.641
wall plus 6% for use in
Min. wall 0.310" 0.445" 0.584" 0.716" 0.852" 0.987" 1.123"
estimating fluid flows.
Average
Actual ID will vary. DR 15.5 I.D.
4.143" 5.956" 7.812" 9.582" 11.395" 13.207" 15.020"

• Service factors should ( 139psi )

Weight lb/lf 1.893 3.906 6.723 10.110 14.306 19.210 24.856
be utilized to compen-
Min. wall 0.282" 0.406" 0.532" 0.653" 0.776" 0.900" 1.024"
sate for the effect of liq-
uids other than water, Average
4.201" 6.040" 7.921" 9.716" 11.554" 13.392" 15.230"
DR 17 I.D.
and for other tempera- ( 126psi )
Weight lb/lf 1.761 3.640 6.261 9.420 13.319 17.894 23.150
tures.
• Other piping sizes or Min. wall 0.229" 0.329" 0.431" 0.529" 0.629" 0.729" 0.829"

DR’s may be available Average

4.315" 6.203" 8.136" 9.979" 11.867" 13.755" 15.643"
DR 21 I.D.
upon request. ( 101psi )
Weight lb/lf 1.450 2.990 5.132 7.730 10.930 14.680 18.980
• Standard Lengths:
40’ for 2”-24” Min. wall 0.185" 0.265" 0.348" 0.427" 0.508" 0.588" 0.669"
50’ for 26” and larger Average
4.409" 6.337" 8.312" 10.195" 12.124" 14.052" 15.981"
Coils available for 4” DR 26 I.D.
( 81 psi )
Weight lb/lf 1.180 2.434 4.190 6.300 8.910 11.969 15.481

Min. wall 0.148" 0.212" 0.278" 0.342" 0.406" 0.471" 0.535"

Average
4.487" 6.450" 8.460" 10.376" 12.339" 14.302" 16.265"
DR 32.5 I.D.
( 64 psi )
Weight lb/lf 0.950 1.964 3.379 5.090 7.190 9.660 12.490
1-800-345-ISCO
[Link]
20 © Copyright 2009
2007 ISCO Industries, LLC. All Rights Reserved.
ISCO HDPE
ISCO HDPE Product
Product Catalog
Catalog
PE 4710
PE 4710 DIPS
DIPS HDPE
HDPE Pipe
Pipe Sizes
Sizes
Nominal
18" 20" 24" 30" 36" 42" 48"
Size Pressure
Actual Rating
19.50" 21.60" 25.80" 32.00" 38.30" 44.50" 50.80"
O.D.

2.786" 3.086" --- --- --- --- --- Min. wall

Average
13.594" 15.058" --- --- --- --- ---
I.D. DR 7
Weight ( 336psi )
63.885 78.386 --- --- --- --- ---
lb/lf
2.671" 2.959" 3.534" --- --- --- --- Min. wall HDPE Pipe
Average
13.837" 15.327" 18.307" --- --- --- ---
I.D. DR 7.3
Weight ( 320psi )
61.710 75.004 109.056 --- --- --- ---
lb/lf
2.167" 2.400" 2.867" 3.556" --- --- --- Min. wall
Average
14.907" 16.512" 19.723" 24.462" --- --- ---
I.D. DR 9
•• Items
Items highlighted
highlighted in
in
51.660 63.385 91.123 140.183 --- --- ---
Weight
lb/lf
( 252psi )
Blue indicates standard
Blue indicates standard
stocking items
stocking items that
that are
are
1.773" 1.964" 2.345" 2.909" 3.482" --- --- Min. wall
more readily available.
more readily available.
Average
15.742" 17.437" 20.828" 25.833" 30.919" --- ---
I.D. DR 11 • Pressures are
• Pressures are based
based
43.292 53.120 76.229 117.285 167.010 --- ---
Weight ( 202psi ) on using water
on using water atat 23°C
23°C
lb/lf
(73°F).
(73°F).
1.444" 1.600" 1.911" 2.370" 2.837" 3.296" --- Min. wall
Average •• Average
Average inside
inside diameter
diameter
16.438" 18.208" 21.748" 26.975" 32.285" 37.512" ---
I.D. DR 13.5 calculated using
calculated using nomi-nomi-
35.970 44.140 63.270 97.324 138.770 187.330 ---
Weight ( 161psi ) nal OD and minimum
nal OD and minimum
lb/lf
wall plus
wall plus 6%
6% for
for use
use inin
1.258" 1.394" 1.665" 2.065" 2.471" 2.871" 3.277" Min. wall estimating fluid flows.
estimating fluid flows.
16.833" 18.646" 22.271" 27.623" 33.062" 38.414" 43.852"
Average Actual ID
Actual ID will
will vary.
vary.
I.D. DR 15.5
31.205 38.301 55.693 85.672 122.701 165.642 215.834
Weight
lb/lf
( 139psi )
•• Service
Service factors
factors should
should
be utilized to compen-
be utilized to compen-
1.059" 1.176" 1.518" 1.882" 2.253" 2.618" 2.988" Min. wall sate for
sate for the
the effect
effect of
of liq-
liq-
17.255" 19.106" 22.583" 28.009" 33.524" 38.951" 44.465"
Average uids other than water,
uids other than water,
I.D. DR 17
Weight ( 126psi )
and for
and for other
other tempera-
tempera-
29.070 35.680 51.086 78.557 112.132 151.390 197.050
lb/lf tures.
tures.
0.857" 0.952" 1.229" 1.524" 1.824" 2.119" 2.419" Min. wall
•• Other
Other piping
piping sizes
sizes or
or
17.683" 19.581" 23.195" 28.770" 34.434" 40.008" 45.672"
Average DR’s may
DR’s may be
be available
available
I.D. DR 21 upon request.
upon request.
Weight ( 101psi )
23.840 29.250 41.852 64.370 91.930 124.093 161.717
lb/lf
•• Standard
Standard Lengths:
Lengths:
0.692" 0.769" 0.992" 1.231" 1.473" 1.712" 1.954" Min. wall 40’ for 2”-24”
40’ for 2”-24”
Average 50’ for
50’ for 26”
26” and
and larger
larger
18.032" 19.969" 23.696" 29.391" 35.177" 40.872" 46.658"
I.D. DR 26 Coils available for 4”
Coils available for 4”
Weight ( 81 psi )
19.443 23.860 34.107 52.494 75.005 101.280 131.953
lb/lf
0.554" 0.615" 0.794" 0.985" 1.178" 1.369" 1.563" Min. wall
Average
18.326" 20.295" 24.117" 29.913" 35.802" 41.597" 47.486"
I.D. DR 32.5
Weight ( 64 psi )
15.690 19.260 27.517 42.340 60.514 81.692 106.460
lb/lf
1-800-345-ISCO
1-800-345-ISCO
[Link]
[Link]
© Copyright
© Copyright 2007
2009 ISCO
ISCO Industries,
Industries, LLC.
LLC. All
All Rights
Rights Reserved.
Reserved. 21
21
 ISCO HDPE Product Catalog

Weholite: Lightweight
Piping System
In addition to solid wall HDPE pipe, ISCO offers a profile wall system known as Weholite manufactured by KWH
pipe. This patented structured (profile) wall pipe has a smooth interior and exterior with a hollow core that offers
HDPE Pipe exceptional strength to weight characteristics. Its unique structure can be offered in a range of sizes up 120”
diameter and a variety of pipe stiffness depending on customer requirements. Weholite offers superior corrosion
resistance and toughness over metal and concrete. It has better flow characteristics than any other large diame-
ter piping materials, which makes it ideal for relining failing culverts and sewers. It is very lightweight and impact
resistant which typically involves less installation equipment and more forgiving handling on site. Weholite can be
welded for a leak free system capable of operating at low pressure.

New Culvert & Culvert Relining Odor Control (Foul Air) / Biofilter
Systems

Storm Water Drainage and Retention Irrigation, Water Conservation &

Diversion

Versatile lightweight pipe

system for gravity and
low-pressure applications.

1-800-345-ISCO Sanitary Sewer & Insert Renewal

[Link]
22 © Copyright 2009 ISCO Industries, LLC. All Rights Reserved.
ISCO HDPE Product Catalog

Typical Resin Properties for Weholite Pipe (73o F)

Property Standard Value Unit
Density (Compounded) ASTM D1505 0.955 gm/cm3
Melt Index (Pipe Condition 190/21.6) ASTM D1238 7.5 gm/10min
Secant Flexural Modulus (2% Strain) ASTM D790 118,000 psi
Tensile Strength at Yield ASTM D638 3,200 psi
Environmental Stress Crack
ASTM D1693 >5,000 Fo hrs
Resistance (Condition C)
Hydrostatic Design Basis ASTM D2837 1,600 psi
Carbon Black ASTM D1603 minimum 2 %
Elongation at Break ASTM D638 850 % HDPE Pipe

Weholite is manufactured in accordance with ASTM F894.

Average Outside Diameter
Weholite Nominal Pipe
for Max. Stiffness for Min. Stiffness
Pipe Size ID (inches) (inches) (inches)
18 18 20.2 19.9
19.5 19.5 21.7 21.7
21 21 23.7 22.9
24 24 27.1 26.2
27 27 30.4 30.0
30 30 33.8 32.7
33 33 39.6 37.6
36 36 40.7 39.1
40 40 45.2 43.4
42 42 47.5 45.4
48 48 53.8 51.8
54 54 60.5 58.7
60 60 67.2 65.2
66 66 73.9 70.7
72 72 80.6 77.8
78 78 87.4 84.5
84 84 94.1 90.5
90 90 100.8 97.2
96 96 107.5 103.2
108 108 121.0 115.9
120 120 134.4 128.6

Notes
1. The above chart represents a range of sizes and stiffness classes. Stock will vary from plant
to plant. Contact ISCO for availability.
2. Weholite is available in a series of different Ring Stiffness Constants (RSC) values that comply with
ASTM F-894-98 “Polyethylene Large Diameter Profile Wall Sewer and Drain Pipe”.
3. Weholite is available in standard lengths of 20 and 40 feet with custom sizes 3 feet to 50 feet.
4. Contact your local ISCO Representative for design assistance to meet your specific project needs.

1-800-345-ISCO
[Link]
© Copyright 2009 ISCO Industries, LLC. All Rights Reserved. 23