WeldScanner Validator
The IEC 60974-14 Validation Tool
The WeldScanner Validator validates/calibrates all
brands of welding equipment in accordance with the
Standard IEC 60974-14 - Validation of Arc Welding
Equipment. It also offers the same full level of
functionality as the WeldScanner.
The device ensures precise measurement for
welding voltage, welding current, wire feed speed
and optional gas flow rate and travel speed.
The WeldScanner Validator is delivered as a
calibrated system and should be calibrated on an
annual basis, e.g. in our laboratory, to ensure
compliance with the standards also providing
traceability to national standards.
Touch screen or keyboard operated
WeldScanner Validator with
HF proof, can safely test TIG equipment
Transport Case (Full Package)
Used for welding process variables such as current,
voltage, gas flow rate, wire feed speed, etc.
Processes Measuring reports for validation available as PDF
Welding power source and customer database
GMAW
GTAW Easy to operate and simple to connect
SMAW Available for arc welding
SAW Correct measurement of all types of square wave arcs
Works with all load resistors, pre-programmed with
settings for RC500 and Checkmaster 9000
WeldScanner Visit [Link] for more information.
Load Resistor
(RC500)
Sensors for WeldScanner Validator
Process Sensor
Basic Package:
(P350/500) Process sensor
P350/500, wire
sensor mobile
WeldScanner
Validator –
SAW Package:
Usable with any Process sensor
arc welding P1400/2000,
wire sensor
power source SAW
WeldScanner Validator
Various Applications
Validation for all types and brands of arc welding equipment
Automatic creation of Validation certificates
Complies with IEC 60974-14 – Validation of Arc Welding Equipment
Capable of measuring all welding arc types, True RMS measuring and Rectified Average Mean Value for square waves
High Frequency proof
Measuring all values, amperage, voltage, wire feed speed (travel speed and gas flow optional)
Measuring on Standard Grade and Precision Grade
Ordering Information
GMAW/GTAW/SMAW SAW
Description Part Number 350/500 A 1400/2000 A
WeldScanner Validator BASIC HKS0002803 X
WeldScanner Validator SAW HKS0002804 X
WeldScanner Validator FULL HKS0002805 X X
Gas Flow Sensor 30 l/min HKS0001425 X
Welding Travel Speed Sensor HKS0001429
Load Resistor for Arc Welding, Switchable Ranges (RC500) HKS0001536 X 2x
Recalibration
Calibration WeldScanner Validator 0,5% HKS0002323 X
Calibration WeldScanner Validator SAW 0,5% HKS0002324 X
Calibration WeldScanner Validator FULL 0,5% HKS0002325 X X
Package Content
XA00197220 Rev1 11/2021 ESAB reserves the right to alter specifications without prior notice.
BASIC SAW FULL
WeldScanner device WeldScanner device WeldScanner device
Validator software package Validator software package Validator software package
USB mouse/keyboard USB mouse/keyboard USB mouse/keyboard
Process sensor P350/500 Process sensor P1400/2000 SAW Process sensor P350/500
Wire sensor mobile Wire sensor SAW 3-5mm Process sensor P1400/2000 SAW
Connection cable sensor, 5m Connection cable sensor, 5m Wire sensor mobile
Plug adapter for welding voltage WeldScanner transport case Wire sensor SAW 3-5mm
WeldScanner transport case PC software for data export and Connection cable sensor, 5m
PC software for data export and evaluation Plug adapter for welding voltage
evaluation Measuring cable for voltage 5m
WeldScanner transport case
PC software for data export and
evaluation
ESAB / [Link]
