VISHAL YADAV LinkedIn GitHub
+917755865816 vishal7k7@[Link] vishal.20213044@[Link]
EDUCATION PROJECTS
Bachelor of Technology in Mechanical Engineering Title: Modeling and Simulation of
Motilal Nehru National Institute of Technology Refrigeration Systems Using Simscape
01/2021 - 01/2025 Allahabad Fluids
CPI: 7.55 (till 5th semester)
01/2024 - 02/2024
Intermediate Tools & technologies used: MATLAB, SolidWorks
• Designed CAD of the evaporator, and
Radhika Bal Vidya Mandir Senior Secondary School
condenser and modeled a refrigeration system
01/2019 - 12/2019 Jaunpur using Simscape Fluids.
Percentage: 81.8
• Conducted parameter sweeps and
High School optimized compressor speed and outlet
Maa Durga Ji Senior Secondary Vidyalaya pressure for improved system
01/2017 - 12/2017 Jaunpur performance.
CGPA:10 • Developed and validated a test harness
model for the evaporator/cold plate
SKILLS assembly, ensuring accurate mass flow
and heat exchange simulations
• AutoCAD • SolidWorks • Ansys
• MATLAB • C/C++ • Python
• OpenCV • JavaScript • Robotics
Title: Design and Development of an
EXPERIENCE Electric Bike
09/2023 - 02/2024 SAE Club, MNNIT
Vocational Training
• Designed and developed an electric bike,
NTPC
06/2024 - 07/2024 Meja optimizing weight and ensuring strong
• The Ball Following Bot project utilizes Arduino and Raspberry Pi to structure using CAD software. Integrated an
create a self-directed robot capable of tracking and following a • efficient electrical system with better battery
moving ball by detecting its specific color using a camera for management and motor control, enhancing
image processing performance and range.
• The Raspberry Pi, equipped with a camera module, handles the Led a multidisciplinary team, managing
image analysisusing OpenCV, Python, and NumPy. • project timelines and resources to meet
• The Arduino, connected to an H-Bridge motor driver, controls the technical andfunctional goals on time.
motors formovement.
• If the ball goes out of the camera's scope, the robot performs a 360-
degreerotation until the ball re-enters the frame Title: Ball Following Bot
02/2023 - 04/2023 Robotics Club Mnnit
Summer Internship Tools & technologies used: OpenCV, Python, NumPy.
Simulation Lab • The Ball Following Bot project utilizes
06/2023 - 07/2023 Re m ote Arduino and Raspberry Pi to create a self-
• Conducted research on enhancing aerodynamic efficiency through directed robot capable of tracking and
wing flapfeatures. following a moving ball by detecting its
• Performed 2-way Fluid-Structure Interaction Analysis on aircraft specific color using a camera for image
wings. processing.
• Executed Acoustic Analysis on aircraft wings under vibrating • The Raspberry Pi, equipped with a
conditions usingCFD and structural methods. camera module, handles the image
Python,
analysisand
NumPy.
using OpenCV,
ACHIEVEMENTS The Arduino, connected to an H-Bridge
• motor driver, controls the motors for
Blueprint: 1st runner-up in Blueprint under Mechrochosm. movement.
AutoMaxx:1st Position in AutoMax under Mechrochosm. If the ball goes out of the camera's
Detect and Direct: 2nd position in Detect and Direct under Robotics Club. scope, the robotperforms a 360-degree
•
Industrial Monopoly: Special Mention in Industrial Monopoly under rotation until the ball re-enters the frame.
Mechrochosm.
CO-CURRICULAR ACTIVITIES AREA OF INTEREST
• Member of the Robotics Club.
Member of the Robotics Club.
• Member of the Society of Automotive Engineers. • Strength of Material • Thermodynamic
• Fluid Mechanics • IC Engine
• Coordinator of Anokhi Pahel.
• Steam Power Plant • Automobile
