XAF 110-46
Air Compressor Lubricant
Product Description
XAF 110-46 is a fully formulated polyalphaolefin (PAO) based synthetic high
performance compressor lubricant specially formulated for long life and minimal
sludge and varnish formation. Its primary use is in rotary screw air compression
applications. XAF 110-46 is ashless and is formulated with an advanced additive
system to prevent corrosion of the compressor and key components of the
system and inhibit oxidation of the basefluid. The product displays excellent
thermal, oxidative, and hydrolytic stability in applications that require extended
drain intervals and performance. XAF 110-46 is completely demulsible, has a low
pour point and stable viscosity to increase effectiveness in applications where
high and low temperature extremes are encountered. The product is formulated
to meet 21 CFR 178.3570 incidental food contact requirements. XAF 110-46 is
NSF H-1 approved for incidental food contact.
Applications*
Rotary screw air compressors
Centrifugal compressors
* To assure proper lubricant selection, please consult your Xaerus Performance Fluids representative.
Features and Benefits
Feature Potential Benefit
Low Sludge and Varnish Formation Improved system cleanliness
Better cooler efficiency
Lower maintenance costs
Low water content Extended bearing life
Ashless formulation Minimal solid formation
High viscosity index and low pour point Better oil flow and less wear at start up
Wide operating temperature range
Rust and corrosion protection Maximum bearing, cooler and
equipment life
Excellent thermal and oxidative stability Minimal vapor phase oil carryover to
downstream equipment
Longer oil life
Longer filter life
Minimize maintenance costs
Completely demulsible Good separation in gravity type
oil/water separators
Health and Safety
Based on available information, XAF 110-46 is a non-toxic, non-hazardous product
that is not expected to cause any adverse health effects when used as designed.
Users are advised to follow the recommendations provided in the MSDS.
Physical Properties
Criteria Value Method
Viscosity cSt @ 40° C 42.3 ASTM D-445
Viscosity cSt @ 100° C 7.4 ASTM D-445
Viscosity Index 139 ASTM D2270
Moisture, ppm <50 ASTM D-1744
Specific Gravity @ 60°F/15.6° C 0.841 ASTM D-4052
Density, lb/gal 7.01
Flash Point, °F/°C 504/262 ASTM D-93
Pour Point, °F/°C -44/-42 ASTM D-97
Notice: The information and statements above are based on information we believe to be reliable; however, we
expressly do not represent, warrant or guarantee the accuracy, completeness, or reliability of the same.
