1
EE/EC Batch : Hinglish
Signal and System DPP - 03
Interconnection of LTI System
1. The impulse response of the system shown in the Common Data for 3 to 4
figure is Let P be linearity, Q be time invariance, R be causality and
S be stability.
3. The system shown below has the properties
1
(a) [𝑢(𝑡) − 𝛿(𝑡 − 𝜏)]
𝜏
1
(a) P, Q, R, S (b) Q, R, S
(b) [𝑢(𝑡) − 𝑢(𝑡 − 𝜏)]
𝜏 (c) P, Q (d) R, S
1
(c) [𝑢(𝑡 − 𝜏)]
𝜏
1 4. The system shown below has the properties
(d) [𝛿(𝑡) − 𝛿(𝑡 − 𝜏)]
𝜏
2. The block diagram representation of a DT system is
shown in the figure, where ℎ[𝑛] = δ[𝑛] − δ[𝑛 − 1]
(a) P, Q, R, S (b) Q, R, S
(c) P, R, S (d) P, Q, S
5. An inter-connection of LTI systems is shown in the
figure. The impulse responses are ℎ1 [𝑛] =
0.5𝛿 [𝑛 − 1] + 0.7𝛿[𝑛] and ℎ2 [𝑛] = 𝛿 [𝑛 − 1]. If the
The difference equation that describes the complete
response of overall system be 𝐴𝛿 [𝑛] − 𝐵𝛿 [𝑛 − 1] −
system is
𝐶𝛿[𝑛 − 2], then A + B + C = ________ ?
(a) 𝑦[𝑛] + 𝑦[𝑛 − 1] = 𝑥 [𝑛] − 𝑥 [𝑛 − 1]
(b) 𝑦[𝑛] = 𝑥 [𝑛] − 𝑥[𝑛 − 1]
(c) 𝑦[𝑛] + 𝑦[𝑛 − 1] = 𝑥 [𝑛]
(d) 𝑦[𝑛] + 𝑦[𝑛 − 1] − 𝑦[𝑛 − 2] = 𝑥[𝑛] − 𝑥[𝑛 − 1]
2
6. The impulse response of two systems is 7. Consider the two identical LTI system cascaded as
ℎ1 (𝑡) = 𝑢(𝑡) − 𝑢(𝑡 − 4) follows
𝑡−2
and ℎ2 (𝑡) = 𝑟𝑒𝑐𝑡 ( )
4
Impulse response of the each systems is ℎ1 (𝑡) =
If these systems are cascaded then response of the
ℎ2 (𝑡) = 𝑒 −2𝑡 𝑢(𝑡) . If the impulse response of the
total system is
ℎ(𝑡)
(a) overall system is h(t), then | = _______
ℎ1 (𝑡) 𝑡=2
h( t)
(b)
t
0 4 8
(c)
(d)
3
Answer Key
1. (b) 5. (1.4)
2. (d) 6. (b)
3. (b) 7. (2)
4. (b)
For more questions, kindly visit the library section: Link for app: [Link]
For more questions, kindly visit the library section: Link for web: [Link]
Any issue with DPP, please report by clicking here- [Link]
PW Mobile APP: [Link]
For PW Website: [Link]
