PURELAB

ANALYTICAL RESEARCH

PURELAB® Classic
The PURELAB Classic system combines high performance with economy to deliver 18.2 MΩ-cm
type I ultrapure water at a very cost-effective price. The PURELAB Classic contains many market
leading features to deliver consistent and reliable water purity.

• Ultrapure type I water at very economic costs for the equipment

and the cost of ownership

• Automatic intermittent recirculation minimizes temperature

build-up

• Very easy to maintain – incorporates ‘fast rinse’ ultra filter Ultrapure type I
• Upgradable from single pack to twin pack purification water at a very
• Suitable for all life science and analytical applications economic cost
Process Flow PURELAB Classic UVF
Process Flow PURELAB Classic UVF

Water Quality
Sensor

Ultrafiltration
Membrane
Feedwater
Inlet
(Pre-purified Water) Pump
UV Lamp Deionization
Cartridge Dispenser

0.2µm Point-of-use Filter

(optional)

Purified Water
Drain Outlet
PURELAB
ANALYTICAL RESEARCH
Treated Water Specifications
Model Classic DI Classic UV Classic UF Classic UVF
Flowrate 2.0 l/min max 2.0 l/min max 2.0 l/min max 2.0 l/min max
Inorganics 18.2 MΩ-cm 18.2 MΩ-cm 18.2 MΩ-cm 18.2 MΩ-cm
TOC 3 – 10 ppb 1 – 3 ppb 3 – 10 ppb 1 – 3 ppb
Bacteria - <0.1 CFU /ml 1,2 <0.1 CFU /ml 1,2 <0.1 CFU /ml 1,2
Bacterial endotoxin - - <0.001 EU/ml <0.001 EU/ml
pH Effectively neutral Effectively neutral Effectively neutral Effectively neutral
Particles 0.2 µm 1 0.2 µm 1 Ultrafiltration Ultrafiltration
RNase and DNase - - Removed Removed
Cartridge capacity (LC186) 45,000 liters >18MΩ-cm per single purification pack/µS at pH 7.0
70,000 liters >1MΩ-cm per single purification pack/µS at pH 7.0
1
With POU filter fitted. 2 <1 CFU/ml without point-of-use filter.

Dimensions and Weights

Height 490mm (19.3in) 490mm (19.3in) 490mm (19.3in) 490mm (19.3in)

Width 410mm (16.2in) 410mm (16.2in) 410mm (16.2in) 410mm (16.2in)
Depth 365mm (14.4in) 365mm (14.4in) 365mm (14.4in) 365mm (14.4in)
Weight 14.0kg (30.8 lb) 14.5kg (32.0 lb) 14.5kg (32.0 lb) 15.0kg (33.1 lb)

Feedwater Requirements
Parameter Limits
Source – originally from potable Preferably reverse osmosis (RO) or filtered service deionization (SDI) or distilled.
supply, then pre-treated Note: mixed bed or twin bed deionized supplies should be cation limited at exhaustion.
Fouling index (max) 1 for all models. A 0.2 micron membrane prefilter is recommended for all non-RO feeds.
Service deionization (SDI) – MΩ-cm 1 MΩ-cm minimum resistivity at exhaustion.
Reverse osmosis (RO) – µS/cm Recommended <30 µS/cm
Free chlorine 0.05 ppm max.
TOC Recommended 50 ppb max.
Carbon dioxide 30 ppm max.
Silica 2 ppm max.
Particulates Filtration down to 0.2 micron advisable to protect internal and/or point of use filters.
Temperature 1 - 40°C Recommended 10 - 15°C
Flowrate (maximum requirement) 130 l/hr
Drain requirements (gravity fall Up to 2 l/min
with air gap). Maximum during
service
Feedwater pressure 0.7 bar (10 psi) maximum, 0.07 bar (1 psi) minimum

Electrical Requirements
Mains input 100 - 240V ac, 50 - 60Hz all models
System voltage 24V dc
Power consumption during 60VA
recirculation
Power consumption during 75VA
dispense
Fuses 2 x T6.3 Amp
Reservoir level connection Jack Plug 3.5mm
Noise level during recirculation <40dBA

ELGA LabWater
Tel: 630 343 5251 • Fax: 630 910 4798 • Email: [email protected] • Website: www.elgalabwater.com
ELGA is the global laboratory water brand name of Veolia. The information contained in this document is the property of VWS (UK) Ltd, trading as ELGA LabWater, and is
supplied without liability for errors or omissions. © VWS (UK) Ltd. 2015 – All rights reserved. ELGA® and PURELAB® are registered trademarks of VWS (UK) Ltd.
LITR38748-02US