MAX30
User Guide
[Contents]
I. Run MAX30
1.1 Connecting a device with PC 1-3
1.2 Disconnecting a device with PC 4
II. Data Checking 5
2.1 Reading the test result of a device 6
2.2 Make a test report for each test data 7-8
2.3 Searching for certain of data 9-10
III. Setting
3.1 DATE / TIME Setting 11
3.2 USB COM Port Searching Manually 12-13
IV. Information
4.1 Device information 14
4.2 Administrator Mode 14-15
V. Bluetooth
5.1 Bluetooth device search 16-18
5.2 Bluetooth Connecting PC and Device 18-19
I. Run MAX30
1.1 Connecting a device with PC
Please turn on a device.
It indicates "USb" on LCD display while connecting a device with PC.
AL9010
Connect device with PC
Power "ON".
Standby connecting…
ALP-1
Standby connecting…
iBlow-10
Connect device with PC
Power "ON".
Standby connecting…
Please run "MAX30" which installed in PC.
Click "[Link]".
Double Click the left button of mouse.
1
MAX30 Main Background
* Icon Explanation
Connecting a device with PC
Disconnecting a device with PC
Checking test result
Date and time setting for a device
Detail information about a device
Exit MAX30 program
2
※ It can connect a device with PC when it indicates "USB" on LCD Display of a device.
Click
Connecting completely
* Connecting failure
If see a failure message when a device connect with PC,
① Pull out a USB cable which connect a device.
② Put a USB cable on a device again.
③ Turn on a device.
④ Click "connect" icon.
⑤ If not working again, please refer to 10 page of user guide.
3
1.2 Disconnecting a device with PC
Click
A device also turn off when a device is disconnecting to PC.
4
II. Data Checking
Click
* Icon Explanation
Loading a memorized DATA in a device Data saving as a .dat file extension
Open a saved data as a .dat file Data saving as a .excel file extension
Data printing Exit a Result window
5
2.1 Reading the test result of a device
Click
Device information
Data file
6
2.2 Make a test report for each test data
Double-Click
Click
7
※ Plese fill out blank space if you want.
Amendable
Name for each
Make a note if you have
Click
*Example
8
2.3 Searching for certain of data
Click
Data Search pop-up
※ Data Searching (Can use Duplication of searching)
① Data searching by test number
Change a range of searching
② Data searching by date
③ Data searching by alcohol unit and result
Select alcohol unit
Change a range of
test result
9
④ Data searching by test result of PASS or FAIL
Select PASS or FAIL
※ You can see the searching data by clicking "OK" button.
* Icon Explanation
Searched data saving as a .dat file extension
Data saving as a .excel file extension
Data printing
Exit search result window
10
III. Setting
3.1 DATE / TIME Setting
Click "DATE/TIME SET UP".
①
Click "①" or "②".
②
Click "OK".
* Note
① Set Date/Time : Setting up a device date and time which user wants.
② PC Set Date/Time : Setting up a device date and time which PC's date and time.
※ DATE / TIME Setting is unavailable while bluetooth connecting.
11
3.2 USB COM Port Searching Manually
Please use it when a device can not connect to PC automatically.
Click "OK"
Click Exit MAX30 program.
Click
※ USB COM Port checking
Go to "Control Panel".
Click "System and Security".
Click "Device Manager".
12
Click "Other devices" or "Ports(COM&LPT)".
Check "COM Port(COM5)".
① If can check the port, go to "MAX30" then check "COM port" of setting.
Change COM Port (COM5) which check in Device Manager.
Click "OK".
② If not working with above procedure, please refer to an installation guide and re-insall the driver.
13
IV. Information
4.1 Device information
* Note
① MAX30 Version
② Model name
③ Serial number
④ Software version
⑤ Last calibration date
⑥ Last test date
⑦ Test times after calibration *If a device is recalibrated, Total test counter will set "0".
4.2 Administrator Mode
Double Click "MAX30 ver.." to enter
Administrator mode.
Initial Password, "0000"
Click "OK".
14
※ Administrator
* Note
① Total test time of a device
It can not set "0" even though it is recalibrated.
② Password setting
Initial Password, "0000"
Only accept 4 numbers. (Prohibition on using letter and special character)
③ Delete All Data of a device
Please pay attention to click. It is never going to restore deleted data.
15
V. Bluetooth
Bluetooth function is option. Please check your device is installed bluetooth function.
5.1 Device search
① Enter the option menu of ALP-1 and follow below picture.
② Add bluetooth fuction on your PC.
Go to "Control Panel\Hardware and Sound\Devices and Printers"
Click "Add a device".
Check "ALP-1 XXXXXXXXX".
(XXXXXXXXX : Device serial number)
Double Click "ALP-1 IAC5LBSO1".
Click "Enter the device's pairing code".
16
Pin Code "1000"
Click "Next".
Click "Close".
Click "ALP-1 IAC5LBSO1".
Click the right button of mouse.
17
Click "Properties".
Check "COM13".
5.2 Bluetooth connecting PC and device
① Set-up bluetooth mode on MAX30 Seting menu.
Click "Bluetooth".
Check "Bluetooth COM Port".
18
② Enter the option menu of ALP-1 and follow below picture.
③ Conneting on MAX30 main menu.
Click
Conneting finished
19
