SDSF Hidden Treasures

Session 14258

SHARE in Boston, Summer 2013

Chip Wood
SDSF Design/Development
IBM Poughkeepsie
[email protected]
Trademarks
The following are trademarks of the International Business Machines Corporation in the United States and/or other countries.
IBM®
MVS
JES2
JES3
RACF®
REXX
z/OS®
zSeries®

* Registered trademarks of IBM Corporation

The following are trademarks or registered trademarks of other companies.
Java and all Java-related trademarks and logos are trademarks of Sun Microsystems, Inc., in the United States and other countries.
Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
UNIX is a registered trademark of The Open Group in the United States and other countries.
SET and Secure Electronic Transaction are trademarks owned by SET Secure Electronic Transaction LLC.

* All other products may be trademarks or registered trademarks of their respective companies.

Notes:
Performance is in Internal Throughput Rate (ITR) ratio based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will
vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be
given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here.
IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply.
All customer examples cited or described in this presentation are presented as illustrations of the manner in which some customers have used IBM products and the results they may have achieved. Actual
environmental costs and performance characteristics will vary depending on individual customer configurations and conditions.
This publication was produced in the United States. IBM may not offer the products, services or features discussed in this document in other countries, and the information may be subject to change without notice.
Consult your local IBM business contact for information on the product or services available in your area.
All statements regarding IBM's future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only.
Information about non-IBM products is obtained from the manufacturers of those products or their published announcements. IBM has not tested those products and cannot confirm the performance, compatibility, or
any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
Prices subject to change without notice. Contact your IBM representative or Business Partner for the most current pricing in your geography.
Fun with
LOG
View the System Log

•View the system log online (LOG S)

•View a merged sysplex log (LOG O)
COMMAND INPUT===> FIND HASP395 SCROLL===> CSR
N 4000000 SY1 2013203 16:37:20.94 JOB23185Search log
logdata
00000091
Search $HASP395
data DIANAM ENDE
NC0000000 SY1 2013203 16:37:21.33 INTERNAL 00000281 SE '16.37.21 JOB2318
N 0000000 SY1 2013203 16:37:21.37 TSU21704 00000081 IEF126I RIMFIRE - LO
N 4000000 SY1 2013203 16:37:21.37 TSU21704 00000091 $HASP395 RIMFIRE END
N 0000000 SY1 2013203 16:37:26.65 00000291 IEA989I SLIP TRAP ID=X33
N 0200000 SY1 2013203 16:37:29.08 JOB23211 00000081 $HASP100 D96CLW1C ON
8000000 SY1 01.10.09 STC17351 *60 DSI802A CNM03 REPLY WITH VALID NCCF SY
WTORs
8000000 SY1 01.04.42 *57 DSI802A M03AO REPLY WITH VALID listed
NCCF
WTORs SY
listed
0002000 SY1 01.49.45 STC15235 *12 DENQ002D ENQ Monitor - Reply
below the 'ENQ' or
below the
******************************** BOTTOM OF DATA *************************
log
logdata
data
Locating records by time/date

•LOCATE command can find records in log

by time or time and date
COMMAND INPUT===> LOC 16:37:00 SCROLL===> CSR
N 4000000 SY1 2013223 16:37:20.94 JOB23185 00000091 Find 16:37:00
$HASP395
Find today
DIANAM
16:37:00 todayENDE
NC0000000 SY1 2013223 16:37:21.33 INTERNAL 00000281 SE '16.37.21 JOB2318
N 0000000 SY1 2013223 16:37:21.37 TSU21704 00000081 IEF126I RIMFIRE - LO
N 4000000 SY1 2013223 16:37:21.37 TSU21704 00000091 $HASP395 RIMFIRE END
N COMMAND
0000000 INPUT===> LOC 16:37:26.65
SY1 2013223 16:37:00 08/05/2013 SCROLL===>
00000291 IEA989I SLIP TRAP ID=X33 CSR
N N0200000
4000000SY1
SY1 2013223
201321816:37:29.08
16:37:20.94JOB23211 Find
JOB2318500000081
00000091
Find 16:37:00
$HASP395 on
on8/5
DIANAM
16:37:00
$HASP100 8/5ENDE
D96CLW1C ON
NC0000000 SY1 2013218 16:37:21.33 INTERNAL 00000281 SE '16.37.21 JOB2318
N 0000000 SY1 2013218 16:37:21.37 TSU21704 00000081 IEF126I RIMFIRE - LO
N 4000000 SY1 2013218 16:37:21.37 TSU21704 00000091 $HASP395 RIMFIRE END
N 0000000 SY1 2013218 16:37:26.65 00000291 IEA989I SLIP TRAP ID=X33
N 0200000 SY1 2013218 16:37:29.08 JOB23211 00000081 $HASP100 D96CLW1C ON
Date and time format

•Time format is always hh:mm:ss

•Date format uses SET DATE value to
distinguish month from day
•08/05/2013 or 2013/08/05 are equivalent
•Any of the valid separators can be used
(slash(/) dash(-) period(.))
•Syntax is SET DATE format separator
•format is mmddyy, ddmmyy, yyyymmdd,
etc. and controls display format as well as
LOCATE syntax
•separator is one of / - or .
SDSF SYSLOG display (LOG S)
SYSLOG for each
system is stored
separately on the
SY1 JES SPOOL SY2

JES Spool

SYSLOG
SY1

SYSLOG
SY2

LOG S (SYSLOG) LOG S (SYSLOG)

LOG S (Syslog)
Display Filter View Print Options Search SYSID Help
of system being viewed
-------------------------------------------------------------------------------
SDSF SYSLOG 2.101 SY1 SY1 08/03/2013 1W SYSID3,240
of localCOLUMNS
system02- 81
COMMAND INPUT ===> SCROLL ===> CSR
N 4000000 SY1 2013215 21:28:43.68 T0000055 00000000 $HASP373 D96CLW1 STAR
M 4040000 SY1 2013215 21:29:27.27 00000000 IXC104I SYSTEM STATUS
D 514 00000000 SYSTEM CANNOT TARGET
D 514 00000000 REASON: SYSPLEX CO
D 514 00000000 SYSTEM IS NOT ELIGIB
E 514 00000000 REASON: SYSPLEX CO
NC0000000 SY1 2013215 21:38:04.70 C3E0SY1 00000290 V OPERLOG,HARDCPY
N 0000000 SY1 2013215 21:38:04.88 00000200 IEA630I OPERATOR *OPL
NC0000000 SY1 2013215 21:38:05.01 C3E0SY1 00000290 D C,HC,L=Z
MR0000000 SY1 2013215 21:38:05.02 C3E0SY1 00000090 CNZ4100I 21.38.05 CONS
LR 520 00000090 CONSOLES MATCHING COMM
LR 520 00000090 MSG:CURR=2 LIM=9900
DR 520 00000090 HARDCOPY LOG=(SYSLOG,
DR 520 00000090 ROUT=(ALL)
ER 520 00000090 LOG BUFFERS IN USE: 0
M 0040000 SY1 2013215 21:38:05.24 00000200 IXL014I IXLCONN REQUES
D 521 00000200 WAS SUCCESSFUL. JOBNA
E 521 00000200 CONNECTOR NAME: IXGLOG
0000000 SY2 22.03.10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$H
******************************** BOTTOM OF DATA ********************************

WTORs from all systems are displayed

Viewing SYSLOG for other systems
Display Filter View Print Options SearchSYSID Help
of system being viewed
-------------------------------------------------------------------------------
SDSF SYSLOG 32.101 SY2 SY1 08/03/2013 1W SYSID3,163
of localCOLUMNS
system02- 81
COMMAND INPUT ===> sysid sy2 SCROLL ===> CSR
D 460 00000200 CFNAME:
D 460 00000200 ALLOCATION SIZE:
D 460 00000200 MAX STRUCTURE SIZE:
D 460 00000200 POLICY SIZE:
D 460 00000200 ENTRY COUNT:
D 460 00000200 ELEMENT COUNT:
D 460 00000200 ENTRY:ELEMENT RATIO:
E 460 00000200 ALLOCATION SIZE IS WIT
M 0040000 SY2 2013215 21:37:40.57 00000200 IXL014I IXLCONN REQUES
D 461 00000200 WAS SUCCESSFUL. JOBNA
E 461 00000200 CONNECTOR NAME: IXGLOG
M C000000 SY2 2013215 21:37:40.57 00000200 IXL015I STRUCTURE ALLO
D 462 00000200 STRUCTURE LIST01, CONN
D 462 00000200 CONNECTIVITY=DEFAULT
D 462 00000200 CFNAME ALLOCATION
D 462 00000200 -------- ----------
D 462 00000200 LF02 NO CONNECT
E 462 00000200 LF01 STRUCTURE
0000000 SY2 22.03.10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$H
******************************** BOTTOM OF DATA ********************************

WTORs from all systems are displayed

SDSF OPERLOG display (LOG O)
OPERLOG messages
are stored in a shared
logstream on coupling
SY1 facility SY2

Logstream
CF
structure

LOG O (OPERLOG) LOG O (OPERLOG)

LOG O (Operlog)
Display Filter View Print OptionsSYSIDSearch
of localHelp
system
-------------------------------------------------------------------------------
SDSF OPERLOG SY1 08/03/2013 1W COLUMNS 02- 81
COMMAND INPUT ===> SCROLL ===> CSR
E 461 00000200 CONNECTOR NAME: IXGLOG
M C000000 SY2 2013215 21:37:40.57 00000200 IXL015I STRUCTURE ALLO
D 462 00000200 STRUCTURE LIST01, CONN
D 462 00000200 CONNECTIVITY=DEFAULT
D 462 00000200 CFNAME ALLOCATION
D 462 00000200 -------- ----------
D 462 00000200 LF02 NO CONNECT
E 462 00000200 LF01 STRUCTURE
NC0000000 SY1 2013215 21:38:05.01 C3E0SY1 00000290 D C,HC,L=Z
MR0000000 SY1 2013215 21:38:05.02 C3E0SY1 00000090 CNZ4100I 21.38.05 CONS
LR 520 00000090 CONSOLES MATCHING COMM
LR 520 00000090 MSG:CURR=2 LIM=9900
DR 520 00000090 HARDCOPY LOG=(SYSLOG,
DR 520 00000090 ROUT=(ALL)
ER 520 00000090 LOG BUFFERS IN USE: 0
M 0040000 SY1 2013215 21:38:05.24 00000200 IXL014I IXLCONN REQUES
D 521 00000200 WAS SUCCESSFUL. JOBNA
E 521 00000200 CONNECTOR NAME: IXGLOG
0000000 SY2 22.03.10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$H
******************************** BOTTOM OF DATA ********************************
Customizing colors in Operlog display
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OPERLOG SY1 08/03/2013 0W COLUMNS 02- 81
COMMAND INPUT ===> set screen SCROLL ===> CSR
E Set 461 00000200
Screen CONNECTOR NAME: IXGLOG
Characteristics
M C000000 SY2 2013215 21:37:40.57 00000200 IXL015I STRUCTURE ALLO
D 462 00000200
Select the elements that youSTRUCTURE LIST01, CONN
want to customize.
D 462 00000200 CONNECTIVITY=DEFAULT
D 2 1. Basic 462 00000200
settings CFNAME panels
and tabular ALLOCATION
D 2. OPERLOG462panel
00000200 -------- ----------
D 462 00000200 LF02 NO CONNECT
E 462 00000200 LF01 STRUCTURE
NC0000000 SY1 2013215 21:38:05.01 C3E0SY1 00000290 D C,HC,L=Z
MR0000000 SY1 F1=Help C3E0SY1
2013215 21:38:05.02 F12=Cancel00000090 CNZ4100I 21.38.05 CONS
LR 520 00000090 CONSOLES MATCHING COMM
LR 520 00000090 MSG:CURR=2 LIM=9900
DR 520 00000090 HARDCOPY LOG=(SYSLOG,
DR 520 00000090 ROUT=(ALL)
ER 520 00000090 LOG BUFFERS IN USE: 0
M 0040000 SY1 2013215 21:38:05.24 00000200 IXL014I IXLCONN REQUES
D 521 00000200 WAS SUCCESSFUL. JOBNA
E 521 00000200 CONNECTOR NAME: IXGLOG
0000000 SY2 22.03.10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$H
******************************** BOTTOM OF DATA ********************************
Customizing colors in Operlog display
Display Filter Set
View Print
Screen Options Search
Characteristics: Help Panel
OPERLOG
-------------------------------------------------------------------------------
SDSF OPERLOG SY1 08/03/2013 0W COLUMNS 02- 81
COMMAND INPUT ===> set screen More:SCROLL+ ===> CSR
E Use color and highlighting 1 1.
461Yes 2. No CONNECTOR NAME: IXGLOG
00000200
M C000000 SY2 2013215 21:37:40.57 00000200 IXL015I STRUCTURE ALLO
D Type values to override the original color and highlighting.
462 00000200 STRUCTURE LIST01, CONN
D Press F5/17 to see changes. 462 00000200 CONNECTIVITY=DEFAULT
D 462 00000200 CFNAME ALLOCATION
D Descriptor code Color Highlight
462 00000200 Intensity
-------- ----------
D 1 - System failure 462 00000200 LF02 NO CONNECT
E 2 - Immediate action required 462 00000200 LF01 STRUCTURE
NC0000000 SY1
3 - Eventual
2013215
action
21:38:05.01
required C3E0SY1 00000290 D C,HC,L=Z
MR0000000 SY1 2013215
4 - System status21:38:05.02 C3E0SY1 00000090 CNZ4100I 21.38.05 CONS
LR 5 - Immediate command response RED 520 00000090
USCORE CONSOLES MATCHING COMM
LR 6 - Job status 520 00000090 MSG:CURR=2 LIM=9900
DR 7 - Task-related 520
BLUE 00000090 HARDCOPY LOG=(SYSLOG,
DR 8 - Out of line 520 00000090 ROUT=(ALL)
ER 9 - Operator's request 520 00000090 LOG BUFFERS IN USE: 0
M 004000010SY1 2013215 21:38:05.24
- Not defined 00000200 IXL014I IXLCONN REQUES
D 11 - Critical eventual action 521 00000200 WAS SUCCESSFUL. JOBNA
E 12 - Important information 521 00000200 CONNECTOR NAME: IXGLOG
0000000 SY2 22.03.10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$H
F1=Help F5=Refresh F6=Default F11=Cuaattr F12=Cancel
******************************** BOTTOM OF DATA ********************************
Displaying Operlog messages for a single
system
Display Filter View Print Options Search HelpNumber of active filters
-------------------------------------------------------------------------------
SDSF OPERLOG SY1 08/03/2013 0W 1 FILTER COLUMNS 02- 81
COMMAND INPUT ===> filter sysname eq sy2 SCROLL ===> CSR
E 473 00000090 IXCH0242E One or more
N 0000000 SY2 2013215 22:29:08.57 00000200 IEE252I MEMBER BPXPRMZ
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS3
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS2
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
M 4040000 SY2 2013215 22:29:10.25 S0000043 00000090 HZS0001I CHECK(IBMUSS,
D 485 00000090 BPXH040E One or more d
S settings
E 485 00000090 and the settings in th
NC0000000 SY2 2013215 22:41:49.47 D96CLW1 00000290 R 10,CANCEL
NR0000000 SY2 2013215 22:41:49.48 D96CLW1 00000000 IEE600I REPLY TO 10 IS
N 0000000 SY2 2013215 22:41:50.62 00000000 $HASP255 JES2 CHECKPOI
Filter popup for Operlog
Display Filter View Print Options Search FilterHelp Row 1 to 9 of 25
-------------------------------------------------------------------------------
Command ===>
SDSF OPERLOG SY1 08/03/2013 0W 1 FILTER COLUMNS 02- 81
COMMAND INPUT ===> filter sysname eq sy2 SCROLL ===> CSR
E Type filter criteria. Press473 F4/16 in the IXCH0242E
00000090 Column or One
Operor more
N 0000000 SY2 field for 22:29:08.57
2013215 values, or in the Value field for
00000200 system
IEE252I symbols.
MEMBER BPXPRMZ
N 0000000 SY2 Press F11/23 to clear
2013215 22:29:10.24 all filter criteria.
00000200 IEF196I IEF285I SYS3
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 Filtering is ON
2013215 22:29:10.24 00000200 IEF196I IEF285I SYS2
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I VOL
N 0000000 SY2 AND/OR between
2013215 columns
22:29:10.24 AND (AND/OR)
00000200 IEF196I IEF285I SYS1
N 0000000 SY2 AND/OR within
2013215 a column
22:29:10.24 OR (AND/OR)
00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 22:29:10.24
Column Oper Value 00000200 IEF196I
(may include * andIEF285I
%) VOL
N 0000000 SY2 2013215
SYSNAME 22:29:10.24 EQ SY2 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 22:29:10.24EQ
SYSNAME 00000200 IEF196I IEF285I
&SYSNAME VOL
M 4040000 SY2 2013215 22:29:10.25 S0000043 00000090 HZS0001I CHECK(IBMUSS,
D 485 00000090 BPXH040E One or more d
S settings
E You can use a system symbolic for the filter 485 00000090 and the settings in th
NC0000000
value SY2
starting in 2013215
z/OS 2.122:41:49.47 D96CLW1 00000290 R 10,CANCEL
NR0000000 SY2 2013215 22:41:49.48 D96CLW1 00000000 IEE600I REPLY TO 10 IS
N 0000000 SY2 2013215 22:41:50.62 00000000 $HASP255 JES2 CHECKPOI
 Display Filter View Print Options Search FilterHelp Row 1 to 9 of 25
-------------------------------------------------------------------------------
Command ===>
SDSF OPERLOG SY1 08/03/2013 0W 1 FILTER COLUMNS 02- 81
COMMAND INPUT ===> filter sysname eq sy2 SCROLL
Type filter criteria. Press F4/16 in the Column or Oper ===> CSR
E Column Select Row 1 to 9orofmore
9
field for values, or in the473 00000090
Value IXCH0242E
field for system One
symbols.
N 0000000 SY2 2013215
Press Command
F11/23 to ===>
22:29:08.57 00000200
clear all filter IEE252I MEMBER BPXPRMZ
criteria.
N 0000000 SY2 2013215 22:29:10.24 00000200 IEF196I IEF285I SYS3
N 0000000 SY2 2013215 22:29:10.24
Selection:
Filtering is ON 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 1.
22:29:10.24
SYSNAME 00000200 IEF196I IEF285I SYS2
N 0000000 SY2 2013215
AND/OR 22:29:10.24
2. DATE
between columns 00000200 IEF196I IEF285I
AND (AND/OR) VOL
N 0000000 SY2 2013215 22:29:10.24
3. TIME
AND/OR within a column OR 00000200
(AND/OR) IEF196I IEF285I SYS1
N 0000000 SY2 2013215 4.
22:29:10.24
DATETIME 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215
Column 22:29:10.24 00000200 IEF196I
5. JOBNAMEOper Value (may include * and %) IEF285I SYS1
N 0000000 SY2 2013215 6.
SYSNAME 22:29:10.24
JOBID 00000200 IEF196I IEF285I VOL
N 0000000 SY2 2013215 7.
22:29:10.24
CONSOLE 00000200 IEF196I IEF285I SYS1
N 0000000 SY2 2013215 8.
22:29:10.24
MSGID 00000200 IEF196I IEF285I VOL
M 4040000 SY2 2013215 22:29:10.25 S0000043 00000090 HZS0001I CHECK(IBMUSS,
9. MSGTEXT
D 485 00000090 BPXH040E One or more d
S ****************** Bottom of datasettings
******************
E 485 00000090 and the settings in th
NC0000000 SY2 2013215 22:41:49.47 D96CLW1 00000290 R 10,CANCEL
NR0000000 SY2 2013215 22:41:49.48 D96CLW1 00000000 IEE600I REPLY TO 10 IS
N 0000000 SY2 2013215 22:41:50.62 00000000 $HASP255 JES2 CHECKPOI
Displaying Operlog messages for a single
job
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OPERLOG SY1 08/14/2013 0W 1 FILTER COLUMNS 02- 81
COMMAND INPUT ===> filter jobid eq job31268 SCROLL ===> CSR
N 0200000 AQFT 13226 13:53:08.13 JOB31268 00000281 $HASP250 FTP PURGED -- (
N 0200000 AQFT 13227 08:27:36.75 JOB31268 00000281 $HASP100 D96CLW1G ON INT
S D96CLW1
N 0000000 AQFT 13227 08:27:36.76 JOB31268 00000280 IRR010I USERID D96CLW1
N 0020000 AQTS 13227 08:27:37.55 JOB31268 00000281 ICH70001I D96CLW1 LAST
N 4000000 AQTS 13227 08:27:37.55 JOB31268 00000291 $HASP373 D96CLW1G STARTE
N 0000000 AQTS 13227 08:27:37.56 JOB31268 00000291 IEF403I D96CLW1G - START
N 0004000 AQTS 13227 08:27:39.17 JOB31268 00000290 - ======================
S ========================
N 0004000 AQTS 13227 08:27:39.17 JOB31268 00000290 -
S ----PA
N 0004000 AQTS 13227 08:27:39.17 JOB31268 00000290 - STEPNAME PROCSTEP PGMN
S EXCP SERV PAGE
N 0004000 AQTS 13227 08:27:39.17 JOB31268 00000290 - ISFAACTP PLX AKHP
S 2798 31372 0
N 0004000 AQTS 13227 08:27:40.25 JOB31268 00000290 - ISFAAFD PLX AKHP
S 2142 30559 0
N 0004000 AQTS 13227 08:27:41.32 JOB31268 00000290 - ISFAAPPC PLX AKHP
S 2081 28131 0
Beware: This can be very slow for a large operlog
 Tip – Auto-refresh the Log

New log data is added to the bottom

& command repeats a command at an interval
Use “attention” key to stop auto-refresh
•Make sure you know where that is in your 3270
emulator!!!!!
COMMAND INPUT===> BOT &15 SCROLL===> CSR
Scroll
N 4000000 SY1 2013203 16:37:20.94 JOB23185 00000091 the
thelog
Scroll$HASP395
log DIANAM ENDED
to
NC0000000 SY1 2013203 16:37:21.33 INTERNAL 00000281
tothe
the bottom
SE '16.37.21 JOB23185 $H
bottom
N 0000000 SY1 2013203 16:37:21.37 TSU21704 00000081 IEF126I RIMFIRE - LOGGED
every 15
15seconds
every$HASP395
N 4000000 SY1 2013203 16:37:21.37 TSU21704 00000091 seconds
RIMFIRE ENDED
N 0000000 SY1 2013203 16:37:26.65 00000291 IEA989I SLIP TRAP ID=X33
N 0200000 SY1 2013203 16:37:29.08 JOB23211 00000081 $HASP100 D96CLW1C ON INT
8000000 SY1 01.10.09 STC17351 *60 DSI802A CNM03 REPLY WITH VALID NCCF SY
8000000 SY1 01.04.42 *57 DSI802A M03AO REPLY WITH VALID NCCF SY
0002000 SY1 01.49.45 STC15235 *12 DENQ002D ENQ Monitor - Reply 'ENQ' or 'E
******************************** BOTTOM OF DATA ****************************
 Tip: Emulator
Wide 3270 emulator session shows more data:

SDSF SYSLOG 12.101 SY1 SY1 08/06/2013 0W 3021 COLUMNS 1 80

COMMAND INPUT ===> SCROLL ===> CSR 80-char
80-char
N 4040000 SY1 2013218 09:01:16.49 00000090 CEA0107I COMMON EVENT
M 4040000 SY1 2013218 09:02:07.76 S0000014 00000090 HZS0001I CHECK(IBMCSV, session
session
E 310 00000090 CSVH0957E Problem(s) w
M 4040000 SY1 2013218 09:02:16.61 S0000014 00000090 *HZS0003E CHECK(IBMRACF
D 311 00000090 IRRH204E The RACF_SENS

Command
Commandline
line
isisunchanged
unchanged 132-char
132-char
session
session
SDSF SYSLOG 12.101 SY1 SY1 08/06/2013 0W 3032 COLUMNS 1 132
COMMAND INPUT ===> SCROLL ===> CSR
N 4040000 SY1 2013218 09:01:16.49 00000090 CEA0107I COMMON EVENT ADAPTER IS RUNNING IN FULL FUNCTION MODE.
M 4040000 SY1 2013218 09:02:07.76 S0000014 00000090 HZS0001I CHECK(IBMCSV,CSV_APF_EXISTS): 310
E 310 00000090 CSVH0957E Problem(s) were found with data sets in the APF list.
M 4040000 SY1 2013218 09:02:16.61 S0000014 00000090 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES): 311
D 311 00000090 IRRH204E The RACF_SENSITIVE_RESOURCES check has found one or

More
Moremessage
message
text
textisisvisible
visible
SR (System Response) Panel
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID SysName JobName Message-Text
23002 SY2 HZSPROC HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
25002 SY2 HZSPROC HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIV
26002 SY2 HZSPROC HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOK
27002 SY2 HZSPROC HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
29002 SY2 HZSPROC HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN
40002 SY2 HZSPROC HZS0002E CHECK(IBMRACF,RACF_CERTIFICATE_E
42002 SY2 HZSPROC HZS0002E CHECK(IBMCS,CSTCP_CINET_PORTRNG_
43002 SY2 HZSPROC *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RES
48002 SY2 HZSPROC HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG)
44002 SY2 HZSPROC HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG)
47002 SY2 HZSPROC HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG)
46002 SY2 HZSPROC HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG)
45002 SY2 HZSPROC HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG)
52002 SY2 JES2 *$HASP271 CHECKPOINT RECONFIGURATION OPTIO
50002 SY2 JES2 *$HASP233 REASON FOR JES2 CHECKPOINT RECON
51002 SY2 JES2 *$HASP285 JES2 CHECKPOINT RECONFIGURATION
10 SY2 JES2 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG
SR (System Response) Panel
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 1-1 (1)
COMMAND INPUT ===> sr r SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID SysName JobName Message-Text
10 SY2 JES2 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG

SR R – displays WTORs only

SR panel – Display complete message
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID Message-Text
23002 HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
29002 HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
40002 HZS0002E CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
42002 HZS0002E CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
43002 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
48002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
47002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
46002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
d 52002 *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002 *$HASP285 JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA

Results in “DISPLAY R,CN=(ALL),MSG=$HASP271”

SR panel – Display results
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 COMMAND ISSUED
COMMAND INPUT ===> SCROLL ===> CSR
RESPONSE=SY1
IEE112I 22.21.14 PENDING REQUESTS 532
RM=1 IM=3 CEM=6 EM=74 RU=0 IR=0 AMRF
ID:R/K T MESSAGE TEXT
52002 I *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS

VALID RESPONSES ARE:

'1' - FORWARD CKPT1 TO NEWCKPT1

'8' - UPDATE AND START USING CKPT2
'CANCEL' - EXIT FROM RECONFIGURATION
CKPTDEF (NO OPERANDS) - DISPLAY MODIFIABLE
SPECIFICATIONS
CKPTDEF (WITH OPERANDS) - ALTER MODIFIABLE
SPECIFICATIONS
45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
52002 *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002 *$HASP285 JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
SR Panel – Display results (ULOG)
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF ULOG CONSOLE D96CLW1 LINE 20 COLUMNS 02- 81
COMMAND INPUT ===> SCROLL ===> CSR
SY1 2013215 22:21:14.89 -DISPLAY R,CN=(ALL),MSG=$HASP271
SY1 2013215 22:21:14.91 IEE112I 22.21.14 PENDING REQUESTS 532
RM=1 IM=3 CEM=6 EM=74 R
ID:R/K T MESSAGE TEXT
52002 I *$HASP271 CHECKPOINT REC

VALID RESPONSE

'1' - FORWARD
'8' - UPDATE A
'CANCEL' - EXI
CKPTDEF (NO OP

CKPTDEF (WITH

******************************** BOTTOM OF DATA ********************************

SR panel – reply to message
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID Message-Text
23002 HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
29002 HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
40002 HZS0002E CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
42002 HZS0002E CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
43002 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
48002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
47002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
46002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
52002 *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002 *$HASP285 JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
r8 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA

Results in “r 10,8”
What if the message response is “long”?
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID Message-Text
Reply Command Extension
23002 HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
25002 ENTER HZS0002E
*10 $HASP272 RESPONSE CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
(ISSUE D R,MSG=$HASP271 FOR RELATED
MSG) 26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
29002 HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
Complete the reply HZS0002E
40002 text, then press Enter.
CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
42002 HZS0002E CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
===> R 10,
43002 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
===> 48002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
F1=Help47002
F12=CancelHZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
46002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
52002 *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002 *$HASP285 JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA

Results in popup menu for reply

 Actions
and
Overtypes
Block commands – action characters
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
//p DEALLOC S0000035 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
P (purge)144
DEALLOC S0000039 SYSTASK action
W CCissued
0000 forSTD
all rows LOCAL
in this range
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
// DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Block commands - overtypes
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
// DEALLOC S0000035 SYSTASK 144 c CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
Class overtype
DEALLOC S0000039 SYSTASK processed
144 W CC 0000 for all rows
STD in this
LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
range
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
// DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Block commands – multiple overtypes
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
// DEALLOC S0000035 SYSTASK 144 c CC 0000 STD n2.fred
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
Class and144
DEALLOC S0000039 SYSTASK routecode
W CC 0000overtype
STD processed
LOCAL for all
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
rows in this
DEALLOC S0000041 SYSTASK
range
144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
// DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Command line extension
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSLOG 2.101 SY1 SY1 08/03/2013 1W 3,240 COLUMNS 02- 81
COMMAND INPUT ===> /setprog apf,add,ddname=isf+ SCROLL ===> CSR
N 4000000 SY1 2013215 21:28:43.68 T0000055 00000000 $HASP373 D96CLW1 STAR
M 4040000 SY1 2013215 21:29:27.27 00000000 IXC104I SYSTEM STATUS
D 514 00000000 SYSTEM CANNOT TARGET
D 514 00000000 REASON: SYSPLEX CO

+ indicates extension required and displays popup

System Command Extension

Type or complete typing a system command, then press Enter.

===> setprog apf,add,ddname=isf.isfload,vol=us1

===>

Place the cursor on a command and press Enter to retrieve it.

More: +
=> D IPLINFO
=> $JDDETAILS
Previous
Previous
=> $jdhistory commands
commands(scrollable)
(scrollable)

F1=Help F5=FullScr F7=Backward F8=Forward F11=ClearLst F12=Cancel

Command line extension (full screen)
SDSF - System Command Extension

Type or complete typing a system command, then press Enter.

===> setprog apf,add,ddname=isf.isfload,vol=us1

Place the cursor on a command and press Enter to retrieve it.

More: +
=> AKEE
=> MF=(M
=> $DU
=> $DJOBCLASS
=> V OPERLOG,HARDCPY
=> ' 12 '
=>
=>
=>

Wait 1 second to display responses (specify with SET DELAY)

Do not save commands for the next SDSF session

F1=Help F5=Pop-up F7=Backward F8=Forward F11=ClearLst F12=Cancel

Overtype extension – single field
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK
Overtype 144 W CC 0000
Extension STD LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD +
DEALLOC S0000036 SYSTASK
Column Dest 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK
Maximum length 18 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK
Type a value. 144 W CC 0000 STD LOCAL
===> POKVMCR3.CHIPWOOD
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
F1=Help F12=Cancel
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Overtype extension – multiple/related field
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF STATUS DISPLAY ALL CLASSES LINE 1-17 (57)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
NP JOBNAME JobID Owner Prty Queue C Pos SAff ASys Status
D96CLW1 T0000032 Overtype
D96CLW1 Extension
15 EXECUTION SY1 SY1
SYSLOG S0000002 +MASTER+ 15 EXECUTION + SY1
RMF S0000004 SYSTASK
Column SAff 15 EXECUTION SY1 SY1
TCPIPALP S0000005 SYSTASK
Maximum length 10 15 EXECUTION SY1 SY1
SDSF S0000007 SDSF 15 EXECUTION SY1 SY1
TCAS S0000008 SYSTASK
Type values 15 EXECUTION
or use blanks to SY1 SY1
VTAM44 erase values.
S0000009 SYSTASK 15 EXECUTION SY1 SY1
===> SY1 SYSTASK
PRIMEPSA S0000010 15 EXECUTION SY1 SY1
===> SY2
HZSPROC S0000013 SYSTASK 15 EXECUTION SY1 SY1
BPXAS ===>
S0000017 OMVSKERN 15 EXECUTION SY1 SY1
INIT ===>
S0000018 SYSTASK 15 EXECUTION SY1 SY1
INIT ===>
S0000019 SYSTASK 15 EXECUTION SY1 SY1
===>
INIT S0000020 SYSTASK 15 EXECUTION SY1 SY1
===>
INIT S0000021
===>
SYSTASK 15 EXECUTION SY1 SY1
INIT S0000022 SYSTASK 15 EXECUTION SY1 SY1
INIT S0000023 SYSTASK 15 EXECUTION SY1 SY1
INIT S0000024 SYSTASK
F1=Help F12=Cancel 15 EXECUTION SY1 SY1
Use ARRANGE to change column widths
Display Filter View Print Options ARRANGE ? to summon arrange popup
Search Help
-------------------------------------------------------------------------------
SDSF STATUS DISPLAY ALL CLASSES -or- LINE 1-17 (57)
COMMAND INPUT ===> arrange ? Select Arrange from View pulldown
SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=* Arrange Row 1 to 11 of 27
NP JOBNAME JobID Owner
Command ===> Prty Queue C Pos SAff ASys Status
D96CLW1 T0000032 D96CLW1 15 EXECUTION SY1 SY1
SYSLOG S0000002
Select a column or block with / or // then type A (after)SY1
+MASTER+ 15 EXECUTION + or
RMF S0000004 SYSTASK
B (before) 15 EXECUTION
to move. Special function keys: SY1 SY1
TCPIPALP S0000005 SYSTASK
F5/17=Refresh 15 EXECUTIONinput F6/18=Default
list F11/23=Clear SY1 SY1
order
SDSF S0000007 SDSF 15 EXECUTION SY1 SY1
TCAS Column
S0000008 SYSTASK Width
15 EXECUTIONDescription SY1 SY1
VTAM44 JobID
S0000009 SYSTASK 8
15 EXECUTION SY1 SY1
Owner
PRIMEPSA S0000010 SYSTASK 8
15 EXECUTION SY1 SY1
Prty
HZSPROC S0000013 SYSTASK 4
15 EXECUTION SY1 SY1
BPXAS Queue
S0000017 OMVSKERN 10
15 EXECUTION SY1 SY1
C 1
INIT S0000018 SYSTASK 15 EXECUTION SY1 SY1
Max-RC 10
INIT S0000019
Pos
SYSTASK 15 EXECUTION
5
SY1 SY1
INIT S0000020
SAffSYSTASK 15 EXECUTION
5 SY1 SY1
INIT S0000021
ASysSYSTASK 15 EXECUTION
4 SY1 SY1
INIT S0000022 SYSTASK
Status 15 EXECUTION
17 SY1 SY1
INIT S0000023 SYSTASK
SecLabel 15 EXECUTION
8 SY1 SY1
INIT S0000024 SYSTASK 15 EXECUTION SY1 SY1
Overtype width to desired value
Prefix area extension
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
+ DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
Expands prefix
DEALLOC S0000037 SYSTASK area to maximum
144 W CC 0000 size
STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK
Maximum 144 W by
size varies CC display
0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
5-8 (most)
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
10 (PRT)
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
12 (SR)
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
 Point-and-Shoot / Cursor Sort
●
Point-and-shoot fields on primary panel and column
headings for interactive users
– On primary panel, takes user to selected panel (ISPF only)
– On tabular column header, invokes sort on that column
●
If the column is not currently being sorted on the sort is set to
Ascending on that column (SORT column A)
●
If the column is already being sorted on Ascending it is set to
Descending on that column (SORT column D)
●
If the column is already being sorted on Descending it will be
set OFF (SORT OFF)
●
Replaces any existing user sort criteria as it is a shortcut to
using the SORT command.
 Cursor Sort Commands
●
SET CSORT command to enable or disable cursor
sorting
– SET CSORT ? Displays the current setting of cursor sort
(ON or OFF)
– SET CSORT ON will enable cursor sort
– SET CSORT OFF will disable cursor sort
●
Column titles are highlighted when cursor sorting is
enabled
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL

38
Copying SYSOUT data to a PDS

● “Is there a way I can copy the output

of a job into a PDS”?
METHOD 1: Edit and copy
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF STATUS DISPLAY ALL CLASSES LINE 1-17 (57)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
NP JOBNAME JobID Owner Prty Queue C Pos SAff ASys Status
DEALLOC S0000035 SYSTASK 1 PRINT 15
se DEALLOC S0000036 SYSTASK 1 PRINT 16
DEALLOC S0000037 SYSTASK 1 PRINT 17
DEALLOC S0000038 SYSTASK 1 PRINT 18
DEALLOC S0000039 SYSTASK 1 PRINT 19
DEALLOC S0000040 SYSTASK 1 PRINT 20
DEALLOC S0000041 SYSTASK
Edit data set
1 PRINT
with ISPF
21
edit
DEALLOC S0000042 SYSTASK (SE1action)
PRINT 22
DEALLOC S0000043 SYSTASK 1 PRINT 23
DEALLOC S0000044 SYSTASK 1 PRINT 24
DEALLOC S0000045 SYSTASK 1 PRINT 25
DEALLOC S0000046 SYSTASK 1 PRINT 26
DEALLOC S0000047 SYSTASK 1 PRINT 27
DEALLOC S0000048 SYSTASK 1 PRINT 28
DEALLOC S0000049 SYSTASK 1 PRINT 29
DEALLOC S0000050 SYSTASK 1 PRINT 30
DEALLOC S0000051 SYSTASK 1 PRINT 31
METHOD 1: Edit and copy (continued)
SDSF EDIT DEALLOC (S0000035) Columns 00001 00072
Command ===> create Scroll ===> CSR
CC0001 1 J E S 2 J O B L O G -- S Y S T E M S Y 1 -
000002 0
000003 16.48.57 S0000035 ---- TUESDAY, 06 AUG 2013 ----
000004 16.48.57 S0000035 IEF695I START DEALLOC WITH JOBNAME DEALLOC IS ASSI
000005 16.48.57 S0000035 $HASP373 DEALLOC STARTED
000006 16.48.57 S0000035 $HASP395 DEALLOC ENDED
Select range of lines to be copied
000007 0------ JES2 JOB STATISTICS ------
000008 - 06 AUG 2013 JOB EXECUTION DATE
000009 - 2 CARDS READ
000010 - 32 SYSOUT PRINT RECORDS
000011 -
Issue CREATE command
0 SYSOUT PUNCH RECORDS
000012 - 2 SYSOUT SPOOL KBYTES
000013 - 0.00 MINUTES EXECUTION TIME
000014 1 //DEALLOC JOB MSGLEVEL=1
000015 2 //STARTING EXEC DEALLOC
000016 3 XXDEALLOC EXEC PGM=IEFBR14
000017 XX* THIS PROCEDURE IS ACTIVATED BY A 'START DEALLOC' COMMAND T
000018 XX* EXECUTE IEFBR14 CAUSING ALLOCATION TO DEALLOCATE A
000019 XX* DEVICE SPECIFIED ON A PREVIOUS 'VARY OFFLINE' COMMAND.
000020 STMT NO. MESSAGE
000021 2 IEFC001I PROCEDURE DEALLOC WAS EXPANDED USING SYSTEM LIBRARY
CC0022 IEF695I START DEALLOC WITH JOBNAME DEALLOC IS ASSIGNED TO USER SYSTAS
METHOD 1: Edit and copy (continued)
Menu RefList Utilities Help
--------------------------------------------------------------------------------
Edit/View - Create
Command ===>
More: +
"Current" Data Set:

To ISPF Library:
Project . . .
Group . . . . Type in data set name
Type . . . .
Member . . .

To Other Sequential Data Set, Partitioned Data Set Member, or z/OS UNIX file:
Name . . . . . ' +
Volume Serial . . (If not cataloged)

Data Set Password . . (If password protected)

Enter "/" to select option Data Conversion option

Specify pack option for "CREATE" Data Set 1. EBCDIC
2. ASCII
3. UTF-8
METHOD 2: Print to data set
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF STATUS DISPLAY ALL CLASSES LINE 1-17 (57)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*
NP JOBNAME JobID Owner Prty Queue C Pos SAff ASys Status
DEALLOC S0000035 SYSTASK 1 PRINT 15
XDC DEALLOC S0000036 SYSTASK 1 PRINT 16
DEALLOC S0000037 SYSTASK 1 PRINT 17
DEALLOC S0000038 SYSTASK 1 PRINT 18
DEALLOC S0000039 SYSTASK 1 PRINT 19
DEALLOC S0000040 SYSTASK 1 PRINT 20
DEALLOC S0000041 SYSTASK
Print to data
1 PRINT
set 21
DEALLOC S0000042 SYSTASK (XDC action):
1 PRINT 22
DEALLOC S0000043 SYSTASK X – 1Indicates
PRINT 23
Print action
DEALLOC S0000044 SYSTASK 1 PRINT 24
DEALLOC S0000045 SYSTASK D – 1Print
PRINTto data set 25
DEALLOC S0000046 SYSTASK C – 1Close
PRINT data set when
26 print complete
DEALLOC S0000047 SYSTASK 1 PRINT 27
DEALLOC S0000048 SYSTASK 1 PRINT 28
DEALLOC S0000049 SYSTASK 1 PRINT 29
DEALLOC S0000050 SYSTASK 1 PRINT 30
DEALLOC S0000051 SYSTASK 1 PRINT 31
METHOD 2: Print to data set
DEALLOC S0000035 SDSF Open Print Data Set
COMMAND INPUT ===> SCROLL ===> CSR

Data set name ===> 'MY.DATASET.NAME' Type in data set name and attributes
Member to use ===> MEMBER
Disposition ===> OLD (OLD, NEW, SHR, MOD)

Management class ===> (Blank for default management class)

Storage class ===> (Blank for default storage class)
Volume serial ===> (Blank for authorized default volume)
Device type ===> (Generic unit or device address)
Data class ===> (Blank for default data class)
Space units ===> BLKS (BLKS, TRKS, CYLS, BY, KB, or MB)
Primary quantity ===> 500 (In above units)
Secondary quantity ===> 500 (In above units)
Directory blocks ===> (Zero for sequential data set)
Record format ===> VBA
Record length ===> 133
Block size ===> 3120
Data set name type ===> (LIBRARY, blank, ... See Help for more)
Extended attributes ===> (NO, OPT, or blank)
Copying SYSOUT data to a PDS

● “I have to do this for several hundred

jobs... do I have to go through all
these panels for every job”?
METHOD 3: Use block actions

● Issue //XDC action prior to first job and // prior to last job
– Still gives the popup for each job, but all values are saved
from panel to panel, so you only have to retype the member
name in this case

● But maybe there's an even better way...

METHOD 4: Print to data set from REXX

● Write a REXX EXEC to loop through all the jobs of interest,

and copy each to a PDS member using XDC action
– Create a list of jobs to be copied
● Issue ISFEXEC ST with appropriate filters to generate list
– For each job in the list, copy the job output to PDS
● Issue ISFACT ST with row token and PARM(NP XDC)
● Input from Print-to-Dataset panel is provided by special REXX
input variables
METHOD 4: Print to data set from REXX
/* REXX*/
rc=isfcalls(“ON”)

isfowner = 'D96CLW1'
isffilter = 'JNAME EQ DEALLOC'
Address SDSF 'ISFEXEC ST'

Do ix=1 to jobid.0
isfprtdsname = 'MY.DATASET.NAME'
isfprtmember = jobid.ix
isfprtdisp = 'OLD'
Address SDSF “ISFACT ST TOKEN('”token.ix”') PARM(NP XDC)”
End

rc=isfcalls(“OFF”)
METHOD 4: Print to data set from REXX
/* REXX*/
rc=isfcalls(“ON”)

isfowner = 'D96CLW1'
isffilter = 'JNAME EQ DEALLOC'
Address SDSF 'ISFEXEC ST'

Do ix=1 to jobid.0
isfprtdsname = 'MY.DATASET.NAME'
isfprtmember = jobid.ix
isfprtdisp = 'OLD'
Address SDSF “ISFACT ST TOKEN('”token.ix”') PARM(NP XDC)”

If rc>0 Then
Do Useful
Usefulto
togather
gatherdiagnostics
diagnostics
Say 'RC='rc isfmsg
Do jx=1 to isfmsg2.0 to
todetermine
determinewhy
whythe
theEXEC
EXEC
Say isfmsg2.jx was
wasnot
notworking
working
End
End

End

rc=isfcalls(“OFF”)
Pulldown
menus
Pulldown menus
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
Position
DEALLOC S0000037 SYSTASK cursor under
144 W CC 0000 desired
STD option
LOCALand
press Enter
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Pulldown menu - Display
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
1. Panels...
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
2. Logs...
COMMAND INPUT ===> SCROLL ===> CSR
3. Exit
PREFIX=** SDSF
DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP JOBNAME JobID Owner Prty C Max-RC Forms Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Pulldown menu - Filter
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL 1. Filter...
CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
2.
COMMAND INPUT ===> Prefix of jobname... SCROLL ===> CSR
3. Owner...
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*
NP 4. Destination...
JOBNAME JobID Owner Prty C Max-RC Forms Dest
5. System name...
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
6. Change
DEALLOC S0000035 APPC to144
SYSTASK OFFW CC 0000 STD LOCAL
7. Replies on
DEALLOC S0000036 SYSTASK the Log...
144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Pulldown menu - View
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
1. Sort...
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 LINE 19-36 (38)
COMMAND INPUT ===> 2. Arrange... SCROLL ===> CSR
3. Set hex
PREFIX=** DEST=LOCAL OWNER=* to ON
SORT=JobID/A SYSNAME=*
NP JOBNAME JobID 4. Change
Owner Prtyfield list to ALTERNATE
C Max-RC Forms Dest
5. Who...
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
Pulldown menu - Options
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS 1. Set
LINES action character
1,990 display...
LINE 19-36 (38)
COMMAND INPUT ===> 2. Find limit... SCROLL ===> CSR
3. Change
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A include SYSIN to ON
SYSNAME=*
NP JOBNAME JobID Owner Prty C 4. Set duplicate
Max-RC Forms SYSOUTDestdata sets to OFF
DEALLOC S0000034 SYSTASK 5. Set
144 W CC 0000 display
STD values...
LOCAL
DEALLOC S0000035 SYSTASK 144 W 6.
CC Set
0000screen
STDcharacteristics...
LOCAL
DEALLOC S0000036 SYSTASK 7. Set
144 W CC 0000 delay for
STD responses...
LOCAL
DEALLOC S0000037 SYSTASK 8. Set
144 W CC 0000 communications
STD timeout...
LOCAL
DEALLOC S0000038 SYSTASK 144 W 9.
CC Set
0000console
STD name... LOCAL
DEALLOC S0000039 SYSTASK 10. Set
144 W CC 0000 search
STDcharacters...
LOCAL
DEALLOC S0000040 SYSTASK 11. Set
144 W CC 0000 language
STD for help
LOCALand tutorial...
DEALLOC S0000041 SYSTASK 144 W12.
CC Set
0000cursor
STDoption...LOCAL
DEALLOC S0000042 SYSTASK 13. Set
144 W CC 0000 confirmation
STD to ON
LOCAL
DEALLOC S0000043 SYSTASK 14. Operlog
144 W CC 0000 limit
STD for filter...
LOCAL
DEALLOC S0000044 SYSTASK 144 W15.
CC Set
0000date STD
format...LOCAL
DEALLOC S0000045 SYSTASK 144 W16.
CC Set
0000log default...
STD LOCAL
DEALLOC S0000046 SYSTASK 17. Set
144 W CC 0000 default
STD browse action...
LOCAL
DEALLOC S0000047 SYSTASK 144 W18.
CC Set
0000default
STD check LOCAL
history limit...
DEALLOC S0000048 SYSTASK 144 W19.
CC Set
0000cursor
STDsort toLOCAL
OFF
DEALLOC S0000049 SYSTASK 20. Set
144 W CC 0000 communications
STD mode...
LOCAL
DEALLOC S0000050 SYSTASK 144 W21.
CC Change
0000 console
STD name modification to OFF
LOCAL
DEALLOC S0000051 SYSTASK 22. Set
144 W CC 0000 security
STD trace...
LOCAL
Pulldown menu - Help
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF OUTPUT ALL CLASSES ALL FORMS LINES 1,990 1.LINE
Extended
19-36 help...
(38)
COMMAND INPUT ===> 2. Keys help...
SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SORT=JobID/A SYSNAME=*3. Help Index...
NP JOBNAME JobID Owner Prty C Max-RC Forms4. Tutorial...
Dest
DEALLOC S0000034 SYSTASK 144 W CC 0000 STD 5. Book...
LOCAL
DEALLOC S0000035 SYSTASK 144 W CC 0000 STD 6. Web sites...
LOCAL
DEALLOC S0000036 SYSTASK 144 W CC 0000 STD 7. REXX
LOCALhelp...
DEALLOC S0000037 SYSTASK 144 W CC 0000 STD 8. Columns
LOCAL help...
DEALLOC S0000038 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000039 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000040 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000041 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000042 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000043 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000044 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000045 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000046 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000047 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000048 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000049 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000050 SYSTASK 144 W CC 0000 STD LOCAL
DEALLOC S0000051 SYSTASK 144 W CC 0000 STD LOCAL
 Useful
commands
REXXHELP command
Display Filter View Print Options
Using Search
REXX with SDSF Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
More: +
COMMAND INPUT ===> SCROLL ===> CSR
Tab to a DEST=LOCAL
PREFIX=** topic and press Enter,
OWNER=* or press Enter to view the topics in
SYSNAME=*
order.
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID Message-Text
o Introduction
23002 - Search - Index -
HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
o Programming
25002 practices
HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
o Quick
26002start HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
o Add the SDSF host
27002 command
HZS0002E environment
CHECK(IBMXCF,XCF_CF_PROCESSORS):
o Issue
29002SDSF commands
HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
- 40002
Commands for tabular CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
HZS0002E panels (ISFEXEC)
- 42002 HZS0002Eand
Log panels (ISFLOG CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
ISFULOG)
43002 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
- Slash (/) commands (ISFSLASH)
- 48002 HZS0002E
Other commands CHECK(IBMUSS,USS_FILESYS_CONFIG):
(ISFEXEC)
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
- Filter commands (special variables)
47002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
- Options commands (special variables)
o 46002
Take HZS0002E
actions and modifyCHECK(IBMUSS,USS_FILESYS_CONFIG):
columns on SDSF panels
o 45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
Browse output and Print output
o 52002
Examples *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
o 50002
Diagnose *$HASP233
errors REASON
in a REXX execFOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002
F1=Help F7=Up *$HASP285
F8=Down JES2 CHECKPOINT
F12=Cancel RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
REXXHELP command
Display Filter View Print SDSFOptions Search Help
REXX: Examples
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
More: +
COMMAND INPUT ===> SCROLL ===> CSR
The following
PREFIX=** examples
DEST=LOCAL contain
OWNER=* just the SDSF-specific portions of execs
SYSNAME=*
that accomplish SDSF tasks.
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP REPLYID Message-Text
Tab to a link below
23002 and press
HZS0002E Enter.
CHECK(IBMRACF,RACF_UNIX_ID):
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
o Access
26002 an SDSF tabular CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
HZS0002E panel
o Cancel
27002 a job HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
o Cancel
29002 a set of jobs CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
HZS0002E
o List
40002job data HZS0002E
sets CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
o 42002 values HZS0002E
Modify CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
for selected jobs (overtype)
o 43002 *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
Modify a value for a set of jobs
o 48002 job output
Browse HZS0002E
with CHECK(IBMUSS,USS_FILESYS_CONFIG):
EXECIO
o 44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
Browse job output with ISFBROWSE
o 47002 a single
Browse HZS0002E
data setCHECK(IBMUSS,USS_FILESYS_CONFIG):
with EXECIO
o 46002 HZS0002E
Browse a single data set CHECK(IBMUSS,USS_FILESYS_CONFIG):
with ISFBROWSE
o 45002 HZS0002E
Browse check output CHECK(IBMUSS,USS_FILESYS_CONFIG):
o 52002 check *$HASP271
Browse output withCHECKPOINT
ISFBROWSERECONFIGURATION OPTIONS
o 50002 check *$HASP233
Browse output fromREASON
checkFOR JES2 CHECKPOINT RECONFIGURATION IS OPER
history
51002
F1=Help F7=Up *$HASP285
F8=Down JES2 CHECKPOINT
F12=Cancel RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
REXXHELP command - Examples
Display Filter SDSF View REXX
Print Options
Example: Search
Access Helppanel
an SDSF
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
More: +
COMMAND INPUT ===> SCROLL ===> CSR
1. Access
PREFIX=** the ST panel,
DEST=LOCAL then list
OWNER=* the column variables.
SYSNAME=*
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP /* REXX */
REPLYID Message-Text
23002 HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
rc=isfcalls('ON')
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
/**********************/
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
/* Access the
29002 ST panel
HZS0002E */
CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
/**********************/
40002 HZS0002E CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
42002SDSF "ISFEXEC
Address HZS0002E
ST"CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
43002
if rc<>0 then *HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
48002
Exit rc HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
47002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
/****************************************/
46002
/* Get fixed HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
field name from first word */
45002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
/* of isfcols special variable */
52002 *$HASP271 CHECKPOINT RECONFIGURATION
/****************************************/ OPTIONS
50002
fixedField *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
= word(isfcols,1)
51002
F1=Help F7=Up *$HASP285
F8=Down JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
F12=Cancel
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
COLSHELP command
Display Filter View Print Options
Columns Search
on SDSF Help
Panels Row 1205 from 1255
-------------------------------------------------------------------------------
Command ===>
SDSF SYSTEM REQUESTS RM Column
1 IMname
3 = REXX
CEM 6 stem
EM 74 variable name(84)
LINE 68-84
COMMAND INPUT ===> SCROLL ===> CSR
Sort with F5 (panel), F6 (column),
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=* F10 (title). Use Filter to filter rows.
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
NP All panels
REPLYID
Column title (interactive)
Descriptions
Message-Text
23002 HZS0002E CHECK(IBMRACF,RACF_UNIX_ID):
Panel 25002Column HZS0002E
Title Delayed? Overtype?
CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
ST 26002JNAME JOBNAME
HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
ST 27002JTYPE HZS0002E
Type CHECK(IBMXCF,XCF_CF_PROCESSORS):
ST 29002JNUM JNum CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
HZS0002E
ST 40002JOBID HZS0002E
JobIDCHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
ST 42002OWNERID HZS0002E
OwnerCHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
ST 43002JPRIO *HZS0003E
Prty CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
X
ST 48002QUEUE HZS0002E
QueueCHECK(IBMUSS,USS_FILESYS_CONFIG):
ST 44002JCLASS HZS0002E
C CHECK(IBMUSS,USS_FILESYS_CONFIG):X
ST 47002POS HZS0002E
Pos CHECK(IBMUSS,USS_FILESYS_CONFIG):
ST 46002SYSAFF HZS0002E
SAff CHECK(IBMUSS,USS_FILESYS_CONFIG):JES2
ST 45002ACTSYS HZS0002E
ASys CHECK(IBMUSS,USS_FILESYS_CONFIG):
ST 52002STATUS *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
Status
ST 50002PRTDEST*$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION
PrtDest JES2 IS OPER
ST 51002 *$HASP285
SECLABEL JES2
SecLabel CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA

If COLSHELP is issued from a specific

panel, it automatically starts there
SEARCH command
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> search max-rc SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*Search Help Row 1 to 4 of 4
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
Command ===>
NP REPLYID Message-Text
23002
Search for: MAX-RCHZS0002E CHECK(IBMRACF,RACF_UNIX_ID): Show titles
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
Select a search result to display the help panel.
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
Max-RC
29002 Return code information
HZS0002E for the job
CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
Max-RC
40002 Return HZS0002E
code information for the job
CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
SDSF displays HZS0002E
42002 the following values in the MAX-RC column to
CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
Max-RC
43002 Return code information for the job
*HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
*****************************
48002 Bottom of data ******************************
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
44002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
47002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
46002 HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
45002 Select to display
HZS0002E panel titles along with
CHECK(IBMUSS,USS_FILESYS_CONFIG):
52002 search results CHECKPOINT RECONFIGURATION OPTIONS
*$HASP271
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002 *$HASP285 JES2 CHECKPOINT RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
SEARCH command
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> search max-rc SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=*Search Help Row 1 to 4 of 4
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
Command ===>
NP REPLYID Message-Text
23002
Search for: MAX-RC HZS0002E CHECK(IBMRACF,RACF_UNIX_ID): / Show titles
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
26002 HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
Select a search result to display the help panel.
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
/ Max-RC
29002 Return code information
HZS0002E for the job
CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
HELP: Held HZS0002E
40002 Output Queue Panel -- Fields Panel 4 of 6
CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
Max-RC
42002 Return HZS0002E
code information for the job
CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
HELP:
43002 Output Queue Panel -- Fields Panel 5 of 6
*HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
SDSF displays HZS0002E
48002 the following values in the MAX-RC column to
CHECK(IBMUSS,USS_FILESYS_CONFIG):
HELP: Return
44002 Code Information
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
Max-RC
47002 Return code information for the job
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
HELP: Status
46002 Panel --
HZS0002E Fields Panel 4 of 6
CHECK(IBMUSS,USS_FILESYS_CONFIG):
*****************************
45002 Bottom of data ******************************
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
52002 *$HASP271 CHECKPOINT RECONFIGURATION OPTIONS
50002 *$HASP233 REASON FOR JES2 CHECKPOINT RECONFIGURATION IS OPER
51002Select*$HASP285
to see a specific topic matching
JES2 CHECKPOINT the
RECONFIGURATION STARTED - DRIVEN B
r 10 search*10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
SEARCH command
Display Filter View Print Options Search Help
-------------------------------------------------------------------------------
SDSF SYSTEM REQUESTS RM 1 IM 3 CEM 6 EM 74 LINE 68-84 (84)
COMMAND INPUT ===> search max-rc SCROLL ===> CSR
PREFIX=** DEST=LOCAL OWNER=* SYSNAME=* Search Help Row 1 to 4 of 4
ACTION=//-Block,=-Repeat,+-Extend,AI-AutoReplyIgnore,C-Remove,D-Display,R-Reply
Command ===> HELP: Held Output Queue Panel -- Fields Panel 4 of 6
NP REPLYID Message-Text
COMMAND INPUT ===>
Search23002
for: MAX-RC HZS0002E CHECK(IBMRACF,RACF_UNIX_ID): Show titles
25002 HZS0002E CHECK(IBMRACF,RACF_TEMPDSN_ACTIVE):
Title
26002 Description
HZS0002E CHECK(IBMRACF,RACF_IBMUSER_REVOKED):
Select a search result to
OGID2 display
Output grouptheIDhelp panel.
2 (JES2 only)
27002 HZS0002E CHECK(IBMXCF,XCF_CF_PROCESSORS):
Max-RC
JP
29002 Return code information for
Job priority the job
HZS0002E CHECK(IBMXCF,XCF_TCLASS_CLASSLEN):
Max-RC Return
CrDate
40002 code information
Creationfor the(JES2
date job only)
HZS0002E CHECK(IBMRACF,RACF_CERTIFICATE_EXPIRATION):
SDSF displays HZS0002E
OHR
42002 the following
Outputvalues
hold in the MAX-RC
reason code column to
CHECK(IBMCS,CSTCP_CINET_PORTRNG_RSV_TCPIP):
Max-RC Return code
Output-Hold-Text
43002 information for the job
Output hold reason text
*HZS0003E CHECK(IBMRACF,RACF_SENSITIVE_RESOURCES):
*****************************
Offs
48002 Bottom
List of datadevices,
of offload ******************************
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):if the job has been
44002 offloaded (JES2 only)
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
Max-RC
47002 Return code information for the job
HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
46002
Device HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
Output device (if printing) or JES processor
45002
SysID HZS0002E CHECK(IBMUSS,USS_FILESYS_CONFIG):
System the output will print on (JES2 only)
52002
RNum *$HASP271 CHECKPOINT
JES job room RECONFIGURATION
number OPTIONS
50002 *$HASP233 REASON
Programmer-Name FOR JES2 CHECKPOINT
JES programmer name RECONFIGURATION IS OPER
51002
Acct *$HASP285 JES2 CHECKPOINT
JES account number RECONFIGURATION STARTED - DRIVEN B
r 10 *10 $HASP272 ENTER RESPONSE (ISSUE D R,MSG=$HASP271 FOR RELA
Search string is hilighted on help page