GARAGE DOORS

SECTIONAL DOORS
UniPro
Intended use: The sectional garage door is intended for use
in private residential buildings. It is made of vertical tracks,
horizontal ceiling-mounted tracks, and a leaf made of steel
panels. The structure is made of galvanized elements. The
door is sealed around the entire circumference.

THERMAL INSULATION SAFETY FUNCTIONALITY

Steel panels are made of galvanized The safety systems focus on minimizing Thanks to our broad range of track
sheet, filled with freon-free, hardened all traces of risk. Regardless of the method systems, WIŚNIOWSKI garage doors can
polyurethane foam and coated with of operation, WIŚNIOWSKI doors ensure be matched to all types of garages.
polyester paint on both sides. This ensures comfort and safety. Our products are A properly selected track type makes
very good thermal insulation and acoustic fully compliant with the PN-EN 13241-1 it possible to take advantage of all the
properties. Each door features a system standard. benefits of the door that can be fitted
of flexible and robust gaskets both along in newly built buildings just as well as in
the entire circumference and between the those to be renovated.
panels, which considerably contributes to
the insulating qualities of the door.
 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

STRUCTURE
The sectional door is installed behind the opening or in the opening (depending on the type), it opens vertically upwards and does not take up
any space on the driveway. Sectional doors let you use the space available in front of the door and inside the building to its maximum potential.
Thanks to our broad range of track systems, WIŚNIOWSKI garage doors can be matched with all types of buildings, even non-standard ones.
Our solutions enable the door to operate without disturbing you in the garage. Thanks to numerous safety systems, our doors are safe at every
stage of opening and closing, regardless of the method of operation: manual or automatic.

The leaf weight is perfectly balanced with the torsion spring system designed for 25,000 cycles or the pull spring system designed for 20,000
cycles. Springs are preselected with computer precision and guarantee the best balancing of the door, maximum comfort, and safety of use.
The doors are made of panels with a profile that prevents fingers from getting crushed. All the steel elements are galvanized (tracks, frames,
fastening elements). The door is fitted with guiding sliding rollers with bearings providing appropriate running of the door curtain, while a
dedicated profile of the tracks prevents derailing.

Large dimension gates are additionally reinforced with special elements that increase the rigidity of the entire structure. Door panels are coated
with high quality polyester paints. This provides optimum protection against the weather conditions and ensures many years of operation.
Thanks to the vast range of colours, WIŚNIOWSKI garage doors can be easily matched to the building’s façade. WIŚNIOWSKI doors are an
investment that stands the test of time.

2 12

3 1 Automation solutions
Proven and reliable automatic operat-
ing units: METRO Smart io, MOTO io or
SPARK.

2 Drive shaft and springs

11 Spring system responsible for balancing
10 out the door leaf weight. The guaranteed
minimum number of cycles: 25,000.

4 3 Tracks and opening frames

Made of galvanized sheet, they provide
a stable and durable structure.

4 Panel hardware
in the RAL 9002 colour
The colour matches the panel colour on
9 the inside.

5 Photocells
They prevent uncontrolled door leaf oper-
ation when an obstacle is present within
5 the clear passage – optional accessory.

6 Bottom gasket
High quality EPDM gaskets perfectly
adapt to the shape of the floor and
6 7 8 prevent water from penetrating under the
door to the inside of the garage.

7 8 9 10 11 12

Overload Cable break Double-lip Quiet Special panel shape Integrated spring
(1)
safety device safety device circumferential seal guiding rollers They prevent fingers from break safety device
In automatic doors; the door Used as standard, it In doors with torsion being crushed.
leaf stops and reverses when ensures improved sealing springs; they ensure proper
the bottom edge contacts an of the door. running of the door.
obstacle.

(1)
– Standard for doors with the SHL, SSpA, and SStA tracks in the entire dimensional range and for doors with other tracks fitted with torsion springs when the surface area
So x Ho ≥ 9 [m2]. For doors So x Ho < 9 [m2], available as an optional accessory.

2| GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

PANEL STRUCTURE

Robust and reliable design

We consistently follow the same design principles for our whole range of sectional garage doors. Thanks to our
robust and reliable design, you can rest assured that the door will meet even the most extreme requirements
and withstand the most demanding operating conditions. Special solutions, such as the original panel built
using the 5-ply sheet bending system ensures stable fixation of elements, which further contributes to the
40 mm strength of the structure. The top section is fitted with a lip gasket. The inner side of the panel in a colour similar
to RAL 9002. Thermal transmittance factor of the panel Up= 0.48 W/m2K]

RIB TYPES

G – without ribs W – high ribs N – low ribs

K – caisson ribs V – V ribs

TEXTURES

Woodgrain Smoothgrain Sandgrain Silkline Silkline, panel with

V ribs

GARAGE DOORS | UniPro SECTIONAL DOORS |3

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

AVAILABLE COLOURS:

Anthracite Golden Oak Walnut Graphite RAL 7016 Graphite RAL 7016 Black RAL 9005
sandgrain woodgrain woodgrain woodgrain silkline silkline

Brown RAL 8014 Silver RAL 9006 Silver RAL 9006 White RAL 9016 White RAL 9016 Golden Oak
woodgrain woodgrain silkline woodgrain silkline smoothgrain

Walnut Anthracite Grey 701605-167 Cream white 137905-167 Dark Green 612505-167 Metbrush silver F436-1002 Silbergrau 116700
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

White 915205-168 Chocolate Brown 887505-1167 Anthracite Quartz 436-1014 AnTEAK 3241002-195 Dark Oak 2052089-167 Swamp Oak 3167004-167
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Summer Cherry3214009-195 Macore 3162002-167 Oregon 1192001-167 Sapeli 2065021-167 Siena noce 49237 PN Siena PL 49254-015
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Siena rosso 49233 PR Winchester 49240 XA Black Cherry 3202001-167 Natural Oak 3118076-1168 Douglas Fir 3152009-1167 Rustic Oak 3149008-167
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Sheffield oak brown F 436-3087 Sheffield oak light F 456-3081 Sheffield oak grey F 436-3086 Brush schwarzbraun F436-1023 Earl platin 119500 Black ulti-mat PX47097
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Woodec Turner Oak Malt Woodec Sheffield Oak Alpine Woodec Sheffield Oak Concrete
F4703001 F4703002 F4703003 Umbragrau F436-6065 Fenstergrau F436-6066 Cremeweiss F456-6001
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Woodec Turner Oak

Anthrazitgrau F436-6003 Dark grey silk 4367003 Golden Oak 2178001-167 Walnut 2178007-167 Anthracite Quartz Matt F4701014 Toffee F4703004
smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain smoothgrain

Irish Oak 3211305-1148 Sable Noir 2100 Sable Noir 2100

smoothgrain silkline woodgrain
Our paint range includes Film coatings available with garage
over 200 colours from doors with the panel:
the RAL palette. G - without ribs or W - with high ribs
4| GARAGE DOORS | UniPro SECTIONAL DOORS
 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

HOME INCLUSIVE 2.0 colours

The Home Inclusive 2.0 colour collection combines four product groups: Gates | Windows | Doors | Fences, which provide
a consistent design of all the products.

HIEARTH

HI WILLOW
HI SMOKE GREEN GREEN HI FERN GREEN HI DEEP GREEN

HISTONE

HI COMFORT
GREY HI WARM STONE HI QUARTZ GREY HI BROWN STONE

HISTEEL

HI TRUE BLUE HI MARINA HORIZON HI ANTHRACITE HI MODERN GRAPHITE

HIRUBY

HI MOODY CORAL HI FLAME RED HI MODERN MAROON HI DEEP BROWN

Doors in light colours should be fitted on the side exposed to sunlight. It is not recommended to fit dark colour doors in such conditions, in
particular RAL: 3007, 4006, 4007, 5004, 5008, 5010, 5011, 5020, 5022, 6008, 6009, 6015, 6022, 7015, 7016, 7021, 7024, 7026, 7043, 8014, 8019,
8022, 9004, 9005, 9011, 9017, 9021, Anthracite, Walnut, Macore, Dark Oak, Swamp Oak, Siena Noce, Siena Rosso, Quartz Anthracite, Summer
Cherry, Sapeli, Dark Green, Sheffield Oak Brown, Rustic Oak, Chocolate Brown, Black Ulti-Mat, Brush Schwarzbraun, Umbragrau, Anthrazitgrau.
When a dark colour is chosen for doors installed on the side exposed to sunlight, the panels can heat up, which may result in deformation. The
door leaf cannot be painted from the inside. When ordering doors in matching colours in different orders (supply batches), the colour hues can
differ due to technological reasons.

GARAGE DOORS | UniPro SECTIONAL DOORS |5

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

U THERMAL TRANSMITTANCE FACTOR [W/m2K]

Door width in [m]
2,250 2,375 2,400 2,500 2,600 2,750 3,000 3,250 3,500 3,750 4,000 4,250 4,500 4,750 5,000 5,500 6,000
2,000 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,100 1,3 1,3 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,125 1,3 1,3 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,200 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
Door height in [m]

2,250 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,1
2,375 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,1
2,500 1,3 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,625 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,750 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
2,875 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
3,000 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
3,250 1,3 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
3,500 1,3 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

The factors are provided for doors without glazing, wicket doors, ventilation grilles, aluminium panels, and additional thermal gaskets.

INSTALLATION DIMENSIONS

W1 W2
Ho

So

So – opening width, ordering dimension W1 – minimum required side clearance

Ho – opening height, ordering dimension W2 – minimum required side clearance
N – minimum required lintel height E – minimum garage depth with clearance under the ceiling

6| GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

TRACKS

Sp tracks
Torsion springs installed in the front by the lintel, garage door with double horizontal tracks.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

• So = 2000 [mm] when Ho > 3000 [mm]

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to

(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500 6000
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000
3250
3500

(1)
– Ordering dimension.

Installation dimensions
...... Sp ...... SSpN SSpN, SSpG, SSpW, SSpK SSpG, SSpW SSpV
Golden Oak, Walnut
RAL 7016, RAL 8014, RAL Golden Oak, Walnut (Smooth-
RAL 9006,
9016, RAL 9006 grain), Anthracite (Sandgrain)
RAL 8014, RAL 9006, RAL RAL 7016,
Colour/Structure RAL 7016, RAL 9016, RAL
9016, other RAL (Woodgrain) panel type G , W , K other RAL
9005, other RAL (Silkline),
(Woodgrain) film coating (Silkline)
Home Inclusive 2.0
(Smoothgrain)
Dimension standard special standard special standard special special
=200[mm] for
=200[mm] for
Ho= 2000 [mm]
Ho = 2000 [mm] =200[mm] for
Ho = 2100 [mm]
Ho = 2100 [mm] Ho = 2100 [mm]
Ho = 2125 [mm]
Ho = 2250 [mm] Ho = 2250 [mm]
Nmin =200 [mm] =200 [mm] Ho = 2250 [mm] =200 [mm] =200 [mm]
Ho = 2500 [mm] =220[mm] for
Ho = 2375 [mm]
=220[mm] for Ho = 2125 [mm]
Ho = 2500 [mm]
Ho = 2125 [mm] Ho = 2200 [mm]
=220[mm] for
Ho = 2200 [mm]
Ho = 2200 [mm]
Sj So - 40 [mm]
Manual Ho - 160 [mm]
E Hj Manual + catcher Ho - 80 [mm]
With a drive unit Ho - 50 [mm]
W1, W2 110 [mm]
Manual Ho + 400 [mm]
With the MOTO drive Ls + 300 [mm]
Emin
Ho + Nmin

With the METRO drive Ls + 410 [mm]

With the SPARK drive Ls + 363 [mm]
Ho
Hj

With the MOTO drive

2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 and Ho ≤ 2850; 4500 [mm] for Ho > 2850 [mm]
With the METRO drive
Ls
3288 [mm] for Ho ≤ 2250; 3831 [mm] for Ho > 2250 and Ho ≤ 2750; 4384 [mm] for Ho > 2751 and Ho ≤ 3250;
With the SPARK drive
4927 [mm] for Ho > 3251 [mm]

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

GARAGE DOORS | UniPro SECTIONAL DOORS |7

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

St tracks
Torsion springs installed at the end of the horizontal tracks, garage door with double horizontal
tracks.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000

(1)
– Ordering dimension.

Installation dimensions
...... St ...... SStN, SStG, SStW, SStK SStV
all available RAL 9006, RAL 7016,
Colour/Structure
colour and structure combinations other RAL (silkline)
Dimension standard special special
Manual 100 [mm]
With the MOTO drive
Nmin 140 [mm]
With the METRO drive
With the SPARK drive 150 [mm]
Sj So - 40 [mm]
Manual Ho - 160 [mm]
E Hj Manual + catcher Ho - 90 [mm]
With a drive unit Ho - 90 [mm]
W1, W2 110 [mm]
Manual Ho + 750 [mm]
With the MOTO drive Ls + 300 [mm]
Ho + Nmin

Emin
With the METRO drive Ls + 410 [mm]
Ho
Hj

With the SPARK drive Ls + 363 [mm]

With the MOTO drive
2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 and Ho ≤ 2850; 4500 [mm] for Ho > 2850 [mm]
Ls With the METRO drive
With the SPARK drive 3288 [mm] for Ho ≤ 2250; 3831 [mm] for Ho > 2250 and Ho ≤ 2750; 4384 [mm] for Ho > 2751 [mm]

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

8| GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

Sj tracks
Torsion springs installed in the front by the lintel, garage door with double horizontal tracks
(active and passive reinforcing track).

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

• So = 2000 [mm] when Ho > 3000 [mm]

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500 6000
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000
3250
3500

(1)
– Ordering dimension.

Installation dimensions
...... Sj ...... SSjN SSjN, SSjG, SSjW, SSjK SSjG, SSjW

Golden Oak, Walnut Golden Oak, Walnut (Smoothgrain),

RAL 8014, RAL 9006, RAL 7016, RAL 8014, RAL 9016, Anthracite (Sandgrain),
Colour/Structure RAL 9016, RAL 9006 RAL 7016, RAL 9016, RAL 9005,
other RAL (Woodgrain) panel type G , W , K (Woodgrain) other RAL (Silkline),
film coating (Smoothgrain) Home Inclusive 2.0
Dimension standard special standard special standard special
=400[mm] for
=400[mm] for
Ho= 2000 [mm]
Ho = 2000 [mm] =400[mm] for
Ho = 2100 [mm]
Ho = 2100 [mm] Ho = 2100 [mm]
Ho = 2125 [mm]
Ho = 2250 [mm] Ho = 2250 [mm]
Nmin =400 [mm] =400 [mm] Ho = 2250 [mm] =400 [mm]
Ho = 2500 [mm] =420[mm] for
Ho = 2375 [mm]
=420[mm] for Ho = 2125 [mm]
Ho = 2500 [mm]
Ho = 2125 [mm] Ho = 2200 [mm]
=420[mm] for
Ho = 2200 [mm]
Ho = 2200 [mm]
E Sj So - 40 [mm]
Manual
Hj Manual + catcher Hj = Ho – 20 [mm]
With a drive unit
W1, W2 110 [mm]
Manual Ho + 400 [mm]
With the MOTO drive Ls + 300 [mm]
Ho + Nmin

Emin
With the METRO drive Ls + 410 [mm]
Ho

With the SPARK drive Ls + 363 [mm]

Hj

With the MOTO drive

2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 and Ho ≤ 2850; 4500 [mm] for Ho > 2850
With the METRO drive
Ls
3288 [mm] for Ho ≤ 2250; 3831 [mm] for Ho > 2250 and Ho ≤ 2750; 4384 [mm] for Ho > 2751 and Ho ≤ 3250;
With the SPARK drive
4927 [mm] for Ho > 3251 [mm]

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

GARAGE DOORS | UniPro SECTIONAL DOORS |9

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

N tracks
Pull springs, garage door with double horizontal tracks.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000

(1)
– Ordering dimension.

Installation dimensions
...... N ...... SNN SNN, SNG, SNW, SNK SNG, SNW
Golden Oak, Walnut (Smoothgrain),
Golden Oak, Walnut Anthracite (Sandgrain)
RAL 8014, RAL 9006, RAL 9016, RAL 7016, RAL 8014, RAL 9016
Colour/Structure RAL 7016, RAL 9016, other RAL
other RAL (Woodgrain)
panel type G , W , K (Woodgrain) (Silkline), Home Inclusive 2.0, film
coating (Smoothgrain)
Dimension standard special standard special standard special
=220[mm] for
=220[mm] for
Ho= 2000 [mm]
Ho= 2000 [mm] =200[mm] for
Ho = 2100 [mm]
Ho = 2100 [mm] Ho = 2100 [mm]
Ho = 2125 [mm]
Ho = 2250 [mm] Ho = 2250 [mm]
Nmin =220 [mm] =220 [mm] Ho = 2250 [mm] =220 [mm]
Ho = 2500 [mm] =240[mm] for
Ho = 2375 [mm]
=240[mm] for Ho = 2125 [mm]
Ho = 2500 [mm]
Ho = 2125 [mm] Ho = 2200 [mm]
=240[mm] for
Ho = 2200 [mm]
Ho = 2200 [mm]
Sj So - 40 [mm]
Manual Ho - 130 [mm]
E
Hj Manual + catcher
Ho - 80 [mm]
With a drive unit
W1, W2 110 [mm]
Manual Ho + 800 [mm]
With the MOTO drive Ls + 300 [mm]
Ho + Nmin

Emin
With the METRO drive Ls + 410 [mm]
Ho

With the SPARK drive Ls + 363 [mm]

Hj

With the MOTO drive

2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 and Ho ≤ 2850; 4500 [mm] for Ho > 2850 [mm]
Ls With the METRO drive
With the SPARK drive 3288 [mm] for Ho ≤ 2250; 3831 [mm] for Ho > 2250 and Ho ≤ 2750; 4384 [mm] for Ho > 2751 [mm]

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

10 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

StA tracks
Tracks at an angle, torsion springs installed at the end of the diagonal tracks.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500
2000
2100
2125
2200
2250
2375
2500
2625

(1)
– Ordering dimension.

Installation dimensions
...... StA ...... Nmin Hj
Sj W1,W2
with the MOTO, with the
Kp manual manual manual + catcher automatic
METRO drive SPARK drive
degrees [°] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
2 140 170 190 Ho - 100 Ho - 80 Ho - 70
E 3 135 165 185 Ho - 110 Ho - 90 Ho - 70
4 130 160 180 Ho - 120 Ho - 90 Ho - 70
5 120 150 170 Ho - 130 Ho - 90 Ho - 70
6 110 140 160 Ho - 140 Ho - 90 Ho - 70
Kp

7 110 140 155 Ho - 140 Ho - 90 Ho - 70

8 100 130 145 Ho - 140 – Ho - 70 So - 40 110
9 100 120 135 Ho - 140 – Ho - 70
Ho + Nmin

10 100 110 125 Ho - 140 – Ho - 70

Ho
Hj

11 100 100 115 Ho - 140 – Ho - 60

12 100 100 110 Ho - 140 – Ho - 60
13 100 100 110 Ho - 140 – Ho - 60
14 to 20 100 100 100 Ho - 140 – Ho - 60

Minimum garage depth Emin Drive unit Emin’ Height Ho

Automatic: Emin=cos(Kp) x Emin’ 3,200 0 - 2,250
MOTO
Manual: Emin=cos(Kp) x (Ho+800) 3,800 2,251 - 2,625
3,310 0 - 2,250
Ho – opening height METRO
3,910 2,251 - 2,625
Emin’ – value from the table, depending on the automatic operat-
3,650 0 - 2,250
ing unit and Ho SPARK
4,190 2,251 - 2,625
Kp – inclination angle of the ceiling in relation to the floor

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

GARAGE DOORS | UniPro SECTIONAL DOORS | 11

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

SpA tracks
Tracks at an angle, torsion springs installed in the front by the lintel.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type ...... ...... N

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
2000
2100
2125
2200
2250
2375
2500
2625

(1)
– Ordering dimension.

Installation dimensions
E

SpA
Kp

...... ...... Nmin Hj

Sj W1,W2
with the MOTO, with the
Kp manual manual automatic
METRO drive SPARK drive
Ho + Nmin

degrees [°] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

2 to 3 360 390 390 Ho - 50 Ho - 20
Ho
Hj

4 350 380 380 Ho - 50 Ho - 20

5 to 6 350 370 370 Ho - 50 Ho - 20 So - 40 110
7 350 360 360 Ho - 50 Ho - 20
8 to 20 350 350 350 Ho - 50 Ho - 20

Minimum garage depth Emin Drive unit Emin’ Height Ho

Automatic: Emin=cos(Kp) x Emin’ 3,200 0 - 2,250
MOTO
Manual: Emin=cos(Kp) x (Ho+450) 3,800 2,251 - 2,625
3,310 0 - 2,250
Ho – opening height METRO
3,910 2,251 - 2,625
Emin’ – value from the table, depending on the automatic operating
3,650 0 - 2,250
unit and Ho SPARK
4,190 2,251 - 2,625
Kp – inclination angle of the ceiling in relation to the floor

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

12 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

HL tracks
High tracks, torsion springs installed by the lintel.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1955 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V , ...... ...... N

• So = 2230 [mm] and Ho = 2040 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000

(1)
– Ordering dimension.

Installation dimensions
E
...... HL ......
SHLN, SHLG, SHLW, SHLK

Colour/Structure all available colour and structure combinations

Nmin

Dimension standard special

Manual
Nmin 400 < N ≤ 1300
With a drive unit
Sj So - 40 [mm]
Manual
Hj Ho – 20 [mm]
With a drive unit
Ho

W1, W2 110 [mm]

Hj

Manual Ho - 0,8 x N+645 [mm]

Emin With the MOTO drive 3200 [mm] for Ho ≤ 2080; 3800 [mm] for 2080 < Ho ≤ 2680; 4800 [mm] for Ho > 2680
With the METRO drive 3310 [mm] for Ho ≤ 2080; 3910 [mm] for 2080 < Ho ≤ 2680; 4910 [mm] for Ho > 2680

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

GARAGE DOORS | UniPro SECTIONAL DOORS | 13

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

UniPro Nano80 garage door

Nano80 – low tracks, torsion springs installed at the end of horizontal tracks.
The design of the UniPro Nano80 garage door was adapted to the installation conditions in which
a small lintel makes it impossible to fit an automatic garage door. Thanks to the special profile of
the tracks, the UniPro Nano80 automatic door can even be installed to lintels just 80 mm high.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1955 [mm] – garage doors type ...... ...... G , ...... ...... W , ...... ...... V , ...... ...... N

• So = 2230 [mm] and Ho = 2040 [mm] – garage doors type ...... ...... K

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to
(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5500
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000

(1)
– Ordering dimension.

Installation dimensions
Nano80 SStN, SStG, SStW, SStK

Colour/Structure all available colour and structure combinations

Dimension standard special
E
Nmin With a drive unit 80 [mm]
Sj So - 40 [mm]
With the MOTO drive Ho - 80 [mm]
Hj
Ho + 80 [mm]

With the METRO drive Ho - 80 [mm]

W1, W2 110 [mm]
Ho
Hj

With the MOTO drive Ls + 600 [mm]

Emin
With the METRO drive Ls + 600 [mm]
Ls 2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 and Ho ≤ 2850; 4500 [mm] for Ho > 2850

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

14 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

SNP tracks
Pull springs mounted along the vertical tracks.

Minimum garage door dimensions:

• So = 1500 [mm] and Ho = 1800 [mm] – garage doors type N ...... ......

• So = 1500 [mm] and Ho = 1900 [mm] – garage doors type G , W, V ...... ...... ...... ...... ...... ......

• So = 2230 [mm] and Ho = 1990 [mm] – garage doors type K ...... ......

• So ≤ 1750 [mm] and Ho max = 2500 [mm], 1750 [mm] < So < 2000 [mm] Ho max = 2750 [mm].

Available range of dimensions for tracks

Opening height(1) Opening width(1) (So) in [mm] up to

(Ho) in [mm] up to 2250 2375 2400 2500 2600 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
2000
2100
2125
2200
2250
2375
2500
2625
2750
2875
3000

(1)
– Ordering dimension. – not applicable for doors with Sandgrain and RAL 9005 Silkline..

Installation dimensions
...... SN ...... SNPN, SNPG, SNPW, SNPK SNPV

all available RAL 9006, RAL 7016,

Colour/Structure
colour and structure combinations other RAL (silkline)
Dimension standard special special
Manual 90 [mm]
With the MOTO drive
Nmin 100 [mm]
With the METRO drive
With the SPARK drive 120 [mm]
Sj So - 40 [mm]
E Manual + catcher (standard) Ho - 60 [mm]
Hj
With a drive unit Ho - 60 [mm]
A
W1, W2 100 [mm]
Manual Ho + 600 [mm]
With the MOTO drive Ls + 300 [mm]
Emin
Ho + Nmin

With the METRO drive Ls + 410 [mm]

With the SPARK drive Ls + 363 [mm]
Ho
Hj

With the MOTO drive

2900 [mm] for Ho ≤ 2250; 3500 [mm] for Ho > 2250 i Ho ≤ 2850; 4500 [mm] for Ho > 2850
Ls With the METRO drive
With the SPARK drive 3288 [mm] for Ho ≤ 2250; 3831 [mm] for Ho > 2250 and Ho ≤ 2750; 4384 [mm] for Ho > 2751 [mm]

So – opening width, ordering dimension. Sj – clear passage width after garage door installation. Ho – opening height, ordering dimension. Hj – clear passage width after garage door
installation. N – minimum required lintel height. W1 – minimum required side clearance. W2 – minimum required side clearance. E – minimum garage depth with clearance under the ceiling.
Ls – drive rail length.

GARAGE DOORS | UniPro SECTIONAL DOORS | 15

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

UniPro SNP 2.0 and UniPro SSt 2.0

The UniPro SNP 2.0 and UniPro SSt 2.0 sectional garage door UniPro SNP 2.0
structure is based on the structure of the UniPro SNP/SSt door,
but it additionally features a purpose-designed system of tracks
and opening frames, which enables adjustment of the door posi-
tion during fitting. This is possible because the tracks are fastened
to the opening frames with screws, as well as thanks to the use of
special opening frame fascia panels in the garage door colour and SSt 2.0
because special angle bars can be used to move their fixing point 2
outside their outline. Depending on the customer’s preferences, 4
the colour of the fascia panels can be changed. Opening frames
in the SNP 2.0 and SSt 2.0 garage door are provided with a mark-
ing (an arrow) at the height of 950 mm from the opening frame 1 3
base, which makes it possible to accurately determine the prop-
er height of the opening frame. Additionally, the opening frames
feature a double fixing hole system, which facilitates installation
when fitting issues occur.
1 2

Side gasket + opening frame Tracks fastened to the

fascia panel in the garage door opening frame with screws
colour
3 4

≥110 ≥110

≥100 ≥110 ≥110

950≥100
mm mark
≥90 Double installation
fixing holes
≥90

FITTING VERSIONS
The cross-sections below show two versions of the SNP 2.0 / SSt 2.0 door installation: when the opening matches the ordering
dimension (Version 1) and when the opening is wider by up to 100 [mm] and higher by up to 50 [mm] than the ordering
dimension (Version 2).
Version 1 Version 2
So
So = Sb
SmN ≤ 50

≥110 ≥110 ≥110 ≥110 SmP ≤ 50 ≥125 SmL ≤ 50 ≥125

≥100 Sb
≥100≥100 ≥125 ≥125
≥90 ≥90 ≥90
≥100

≥90
= Hb

Hb
Ho
Ho

So – opening width.
Sb – door width, ordering dimension.
≥125 ≥125 ≥125 ≥125
Ho – opening height.
≥100≥100
Hb≥90– door height, ordering dimension.
≥90

Example: if a customer orders a 3,000x2,500 [mm] door, it can be installed in an installation opening with a width of 3,000-3,100 [mm] and
a height of 2,500-2,550 [mm]. When a garage door with dimensions smaller than the garage door opening is installed, the fascia panel is
placed inside the clear opening, and side clearance W1 and W2 necessary in order to fit the door is decreased with special angle bars to min.
75 mm, whereas the lintel Nmin – to 50 mm (automatic garage door) and 40 mm (manually operated garage door). Special angle bars are
only used for fixing opening frames. The lintel is not fixed with angle bars.
16 | GARAGE DOORS | UniPro SECTIONAL DOORS
 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

OPTIONAL ACCESSORIES
WICKET DOOR
The standard clear passage width is 900 [mm], the clear passage height can range from 1700 [mm] to 2027 [mm] depending on the height of the
door and panels used.
• The minimum dimensions of a garage door in which a wicket door can be fitted are 2000 x 2000 [mm] (So x Ho).
• The wicket door is available for garage doors with a glazed or ventilated panel with So ≥ 2400 [mm].
• Drip strip in door hardware colour.
• Threshold ~100 [mm] high (including the door gasket ~40 [mm] high).
• The bottom door edge is fitted with a brush seal.
• Wicket door for doors with the SSt and SSt 2.0 tracks can be manufactured with a minimum lintel of 140 [mm]. In doors with the SNP and SNP 2.0
tracks, with a minimum lintel of 115 [mm] for doors with the MOTO io and METRO Smart io drive units, 135 [mm] for doors with the SPARK drive
unit. Not applicable to RenoSystem SSt.
• As standard, the wicket door is installed in the centre of the door leaf. In doors with the following tracks: SSp, Sj, SSt, SSt 2.0, and RenoSystem SSt,
the door can be installed close to the right or left edge (as seen from the inside), opening direction: right or left, outswing, outfitted with a handle
with a cover plate on both sides and a lock with a cylinder lock (three keys).
• One-key system – the lock in the wicket door and the lock in the garage door are both opened with a single key (this does not apply to doors fitted
with an anti-burglary lock cylinder).
• The door hardware, as well as the top and bottom hardware of the garage door is made of aluminium.
• The wicket door option in automatic doors includes a wireless wicket door opening sensor for doors with the MOTO io and METRO Smart io drive
units, and a wired wicket door opening sensor for doors with the STARK drive unit.

1
19 mm

Low threshold 19 mm high minimizes

the number of obstacles in the pas-
sageway (optional accessory).

1 2 3

Wicket door fitted with a The wicket door opening Hardware made of alumin-
threshold 100 [mm] high (in- sensor prevents activation ium, in a colour matching
cluding a 40 [mm] gasket) as of the garage door when the garage door leaf colour.
standard. the wicket door is open. The
wicket door option in auto-
matic doors includes a wicket
door opening sensor.
GARAGE DOORS | UniPro SECTIONAL DOORS | 17
 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

The rail door closer is supplied as standard

with a wicket door installed in manually
operated and power operated doors. It is
fixed to the top hardware of the wicket
door on the inside of the door. It is fitted
with a restrictor. The hold open device can-
not be installed in a wicket door.

4 6

Drip cap (standard accessory). Concealed hinges Rail door closer

that can be adjusted. (standard accessory).

Concealed door closer available in a full

scope of dimensional ranges of the doors
compatible with a wicket door.
The wicket door can optionally be fitted
with a concealed door closer instead of a
rail door closer. A wicket door restrictor
cannot be installed. A hold open device
can be fitted.

5 7

System preventing the leaf Distance brackets Concealed door closer

from dropping. with a safe shape, ensuring (optional accessory).
better tightness.

HARDWARE IN A DECOR COLOUR

Golden Oak Walnut Winchester

Dark Oak Anteak

Decor colour of the wicket door hardware Decor colour of the wicket door hardware
a method of decorating aluminium parts by transferring photosensitive organic pigments from a – available colours
special film onto a layer of polyester powder coat. As a result, a durable and decorative coating
which imitates the natural grain of wood is obtained.

PORTHOLES/GLAZING
230 [mm]
600 [mm]
200 [mm]
525 [mm]
330 [mm]

310 [mm]

230 [mm]
]
m

270 [mm]

200 [mm]
[m

240 [mm]
]
m
6

[m
25
19 5 [mm]

27 0 [mm]

0
17

Type A-1 Type O-1A Type O-2A Type R-1A Type R-2A

Type A-1 – made of double, clear acrylic glass, Type O-1A, O-2A – infill: triple clear acrylic Type R-1A, R-2A – infill: triple clear acrylic
with a rough frame surface. The external frame is glass unit; frame: external and internal, made glass unit; frame: made of stainless steel with
available in RAL 7016, RAL 8003, RAL 8011, RAL of stainless steel with a satin finish. a satin finish.
8014, RAL 8017, RAL 9005, and RAL 9016. The
internal frame is always white. Internal/external
frame made of PVC. External dimensions of the
frame: 600 x 270 [mm]. Light transmission 86%.

18 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

HORIZON GLAZING VISUAL GLAZING GLAZING WITH ALUMINIUM

PANEL

Aluminium panel without or with a thermal Aluminium panel without a thermal break The UniPro garage door is available with an alu-
break, for doors So≤3,000 without glazing with a clear acrylic glass without glazing minium panel glazing without or with a thermal
bars, for doors So>3,000 with a single glazing bars. The door is available with one or two break (for doors with So<5,250). The panel is
bar. The Horizon panel height is 215-250 [mm] VISUAL panel glazings. Available with ga- fitted with a double acrylic glass – a 21 [mm]
depending on the total height of the door. As rage door widths up to So-3,000 [mm]. glass unit. The garage door can be fitted with
standard, the HORIZON panel is positioned Not available with a wicket door. one or two aluminium panels.
between the last and last but one panel from
the bottom. The panel is painted on both
sides in the colour of the external part of the
door. An aluminium panel without a thermal
break can be fitted with LED strip lighting.

GLASS
Intended use: for double glazing of glazed aluminium panels and VISUAL glazing.

No-Scratch Satin Glass pane SAN R Grey

Glass pane with a special coating Glass with a milky white tint. Opaque (so-called frosted) Clear glass with a slight brown tint.
improving its strength, very good Double glazed pane opaque from double glazed pane clear from Double glazed pane, clear from
resistance to scratching and sun- the outside and clear from the the inside. Light transmission the inside, non-coloured from the
light compared to the standard inside. Light transmission 78%. (77-79%). inside. Light transmission (51%).
glazing.

VENTILATED PANEL TOP PANEL TILT

Aluminium panel without a thermal break The kit makes it possible to tilt the top panel without the
or with a thermal break (for doors with need to lift the door curtain. The bottom panel remains seat-
So<5,250), infilled with expanded mesh. ed against the floor.
The door can be fitted with only one ven- Top panel tilt for ventilation or airing of the garage is avail-
tilated panel. able with the following automatic garage doors fitted with
the METRO Smart io, MOTO io or SPARK drive unit: UniPro
SSp, UniPro SSt, UniPro SSt 2.0, UniPro SN.
This solution is not available with garage doors fitted with the
top aluminium panel with So ≥ 4,500.
The kit includes: 2 brackets for garage doors with S < 4,500 |
4 brackets for garage doors with S ≥ 4,500.

Ventilated panel – expanded mesh

GARAGE DOORS | UniPro SECTIONAL DOORS | 19

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

LOCK/HANDLE
The lock is fitted with a single-side lock cylinder, the lock cylinder is accessible from the outside (three keys), from the inside the lock is operated
with a latch. In the manually operated SNP door with So ≥ 4,000 [mm], the lock engages the deadbolt on both sides (single-side locking is
available as an optional accessory). On the outside of the door leaf, a plastic handle with a cover plate type PVC-1 or KL-2 is fitted. A black plastic
handle is installed on the inside. The UniPro SNP and SNP 2.0 doors are not available with the lock and handle fitted in the middle of the door.
The PVC-1 handle is available in black. The KL-2 handle is available in the following colours:
• MAT – RAL 9005, RAL 9016, RAL 8014.
• GLOSS – RAL 9006, RAL 1036, RAL 1035, RAL 7048.

KL-2 handle, colour: RAL 9006 KL-2 handle, colour: RAL 1036 KL-2 handle, colour: RAL 1035 KL-2 handle, colour: RAL 7048

KL-2 handle, colour: RAL 9016 KL-2 handle, colour: RAL 9005 KL-2 handle, colour: RAL 8014 Standard handle

ADDITIONAL SEALS
The UniPro doors are fitted with circumferential double-lip seals as standard. The UniPro door can be fitted with additional thermal seals,
which enable the structural steel elements to be isolated from the wall surface, or finishing thermal seals, which make it possible to provide
an aesthetic finish of the garage door opening by eliminating the gap between the thermal insulation and the door leaf surface, which further
improves door insulation. The sealing is not available with the SNP 2.0, SSt 2.0 and RenoSystem door series.

Thermal seal Finishing thermal seal

20 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

EXAMPLE UniPro DESIGNS

GLAZING

Garage door with portholes – type A-1 Garage door with portholes – type C-1 Garage door with portholes – type E-1

Garage door with portholes – type O Garage door with portholes – type O-1A, Garage door with portholes – type O-2A,
stainless steel frame stainless steel frame

Garage door with portholes – type R-1A, Garage door with portholes – type R-2A, Garage door with portholes – type W3-1
stainless steel frame stainless steel frame

Garage door with portholes – type W4-1 Garage door with portholes – type W5-1

Garage door with portholes – type W6-1

GARAGE DOORS | UniPro SECTIONAL DOORS | 21

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

DECORATIVE MOTIFS

Type Ap-1 Type Ap-2 Type Ap-3

Type Ap-4 Type Ap-5 Type Ap-6

The Ap-1 – Ap-6 decorative motifs

are available in stainless steel
colour and RAL 9005.
Ap7 decorative motifs are available
in stainless steel and copper-clad
stainless steel colours.

Type Ap-7 in garage doors with panels without Type Ap-7 in garage doors with panels with
ribs high ribs

OTHER MANUFACTURING OPTIONS

Garage door with an aluminium panel glazing Garage door with the VISUAL glazing Garage door with a wicket door
- available for garage door widths up to
So = 3000 [mm]

Garage door with a ventilated panel – Garage door with the HORIZON glazing Garage door with a cat door
expanded mesh

22 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

RC2 ANTI-BURGLARY KIT LED LIGHTING UNDER THE TRACKS AND TRACK
CONNECTOR

The anti-burglary kit, available with automatic garage doors with the It is often the case that the lighting installed in the garage does not
METRO Smart io and MOTO io drive units, provides RC2 class burgla- provide enough light. Sometimes, older garages do not have any
ry protection (confirmed with a certificate issued by the IFT notified lighting at all. LED lighting mounted under the tracks and track con-
body in Rosenheim, Germany). nector makes it possible to illuminate the room, guaranteeing low
The kit includes: energy consumption. Easy installation, long-life LEDs, and compati-
• automatic locking mechanism, bility with the METRO Smart io drive unit ensure comfort in daily use.
• reinforced deadbolt system,
• deadbolt plates,
• safeguard preventing the carriage from being unlocked,
• track bumper.

AUXILIARY SUSPENSION BARS

m
417 m

m
530 m

Type “L” suspension Type “I” suspension bar

bar connector
m m
390

Type “C” suspension bar bracket

Maximum lintel for the suspension bar supplied

Tracks
with the garage door

SSp, SSt 400 [mm]

N80 340 [mm]

SNP, SNP 2.0 360 [mm]

SSt 2.0 390 [mm]

SN 428 [mm]

SSj 570 [mm]

HL 1485 [mm]
255 [mm], 355 [mm] for SSt, installation behind the
RenoSystem
opening

GARAGE DOORS | UniPro SECTIONAL DOORS | 23

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

AUTOMATIC OPERATING UNIT KITS

The METRO Smart io, MOTO io, and SPARK series drive units are dedicated for garage doors and ensure full
functionality and overload protection as standard.
The EXTENDED CARE warranty lets you extend the standard warranty for the complete product – automatic
sectional garage door:
3
WARRANTY
years
EXTENDED CARE
5
WARRANTY
EXTENDED CARE
years

• up to 5 years when factory configured with the METRO Smart io or SPARK drive unit, on automatic garage doors
with the MOTO drive unit
on automatic garage doors with
the METRO or SPARK drive unit
• up to 3 years when factory configured with the MOTO io drive unit.

Drive unit type METRO smart io MOTO io SPARK

Power supply / Motor 220-230V, 50/60Hz / 24V DC 220-230V, 50/60Hz / 24V DC 220-240V, 50/60Hz / 24V DC
Force 800N / 1000N 600N / 750N 500N / 600N / 800N / 1100N
Power consumption < 0,5 W < 0,5 W <1W
(power-saving mode)
Efficiency 30% 30% 40%
Track single, steel single, steel split, steel
Transmission chain or belt* chain or belt* carriage
Speed max. 14 cm/s max. 14 cm/s max.: 18 / 24 / 21 / 18 cm/s
Central control unit integrated integrated integrated
Technical data

Radio receiver io-homecontrol; integrated: 868-870 MHz io-homecontrol; integrated: 868-870 MHz WIŚNIOWSKI; integrated: 868 MHz
Radio receiver storage: 30 transmitters 30 transmitters 40 transmitters
Two-way radio transmission yes yes yes
Auto selection of operating yes yes yes
parameters
Limit switches encoder + mechanical bumper encoder + mechanical bumper encoder + mechanical limit switch
Emergency uncoupling yes yes yes
Application sectional / up and over sectional / up and over sectional / up and over
Operating conditions -20°C /+60°C ; IP20 -20°C /+60°C – in a dry room -25°C /+65°C – in a dry room
Wicket door opening sensor yes yes yes
Rotating automatic operating yes yes no
unit head
Warranty 5 years 3 years 5 years
Obstacle detection yes yes yes
Obstacle detection adjustment 4 adjustment levels 4 adjustment levels 4 adjustment levels
Action following obstacle stop and full opening stop and full opening stop and partial opening
detection
Photocells yes yes yes
Automatic closing 60 sec. / 120 sec. or after photoc. yes, only with TaHoma Pro yes / max. 240 sec.
Release in end position yes yes yes
Low energy consumption mode yes yes yes
Independent exterior lighting yes / 230V, 500 W no no
Functionality

Exterior lighting control yes no no

Auxiliary warning light yes / 24V, 15 W yes / 24V, 15W yes / 24V, 25W
Delayed drive unit light switch yes / fixed – 60 s yes / fixed – 30 s yes / fixed – 30 s
off
Independent lighting control in yes yes yes
the drive unit
Emergency power supply yes yes yes
Display / LEDs no / yes no / yes no / yes
Partial opening of the door – yes yes yes
slightly open
Information about a fault yes, LEDs yes, LEDs yes, LED
Smart home yes, io-homecontrol technology(1) yes, io-homecontrol technology(1) yes(2)

(1)
– for full functionality, the TaHoma switch is required.
(2)
– optional, for wired Smart Home systems; CONEX and OUTPUT boards required
* Extra charge.

24 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

OPTIONAL ACCESSORIES
WALL-MOUNTED TRANSMITTER KEYPAD 2 CODE KEYPAD EXTERNAL RADIO RECEIVER io

Makes it possible to control the drive units

The 3-channel transmitter makes it possible The 2-channel code keypad makes it possible of other manufacturers using the Pulsar
to control drive units and wireless receivers. to control drive units and wireless receivers. transmitter. It is a two-channel device which
Examples of use: makes it possible to program as many as 32
- full opening/closing the door, transmitters.
- LED lighting under the tracks, and/or
under the track fastener,
- top panel tilt.
Wireless communication makes it possible
to install it in any place and doesn’t require
any cables.

BACKUP POWER SUPPLY BATTERY MECHANICAL CARRIAGE SIGNAL LIGHT

LOCK

When connected to the METRO Smart io and It is an additional safeguard which increas- Supports the METRO Smart io and MOTO io
MOTO io drive, it provides power for several es garage door safety when mounted to the drive units. Warning function. Orange blink-
cycles of emergency operation. carriage. ing light indicates that the door is operating.

EXTERNAL CODE KEYPAD PHOTOCELLS

The single-channel device can be used to They prevent uncontrolled door leaf move-
control the garage door with a code. For out- ment when an obstacle is present within the
door installation, requires cabling. clear passage.

GARAGE DOORS | UniPro SECTIONAL DOORS | 25

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

OPTIONAL ACCESSORIES FOR THE SPARK AUTOMATIC OPERATING UNITS

2CH WALL-MOUNTED TRANSMITTER WIŚNIOWSKI 868 RADIO LOCK – MOTOR LOCK
RECEIVER

2-channel device which lets you control It makes it possible to control other drive A magnetic lock which blocks the drive unit
both your drive units and radio receivers. units with the DART and DART Vibe trans- in any position of the door. An additional el-
Communication between the transmitter mitters, and the wall-mounted transmitter. ement able to withstand loads up to 300 kg,
and the receiver occurs wirelessly, so the The radio receiver is a two-channel device increasing door safety.
device can be mounted in any place. operating at the frequency of 868 MHz, mak-
The wall-mounted transmitter has a ing it possible to program up to 40 transmit-
feedback function that informs the user ters.
about the position of the door using a LED.

ACCU – EMERGENCY POWER PHOTOCELLS 180 SIGNAL LIGHT

SUPPLY BATTERY

Connected to the SPARK drive unit, it pro- Prevent uncontrolled door leaf movement Connected to the SPARK drive unit, it has a
vides power for several cycles of emergency when an obstacle is present within the clear warning function. Orange blinking light indi-
operation in case of the main power supply passage. cates that the door is operating.
outage.

CONEX OUTPUT DART/ DART VIBE REMOTE CONTROL

– INPUT BOARD – SIGNAL BOARD TRANSMITTER

Additional board with signal, impulse inputs, Additional board with a signal input. Infor- The transmitter makes it possible to con-
whose inputs were defined for opening and mation about the position of the door: door trol the operation of several drive units. The
closing. not open (NO)/door not closed (NC). DART Vibe transmitter has a feedback func-
Compatible with wired Smart Home systems. Compatible with wired Smart Home systems. tion in the form of vibration, which is a con-
firmation that the signal from the transmitter
was received.

26 | GARAGE DOORS | UniPro SECTIONAL DOORS

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

UniPro SECTIONAL DOOR

UniPro | RAL 9004 | silkline

UniPro | RAL 3000 | silkline

GARAGE DOORS | UniPro SECTIONAL DOORS | 27

 TECHNICAL DATA SHEET GARAGE DOORS | UniPro SECTIONAL DOORS

TECHNICAL DATA

UniPro

A panel made of galvanized steel sheet with two-side polyester coating, galvanized and painted on both sides, infilled with high density PU foam
Leaf
g=42 kg/m3 without HCFC

Minimum number of cycles 25,000 for doors with torsion springs / 20,000 for doors with pull springs

Thermal transmittance factor U of the panel

0.48
[W/m2xK]

Watertightness class 2 in accordance with PN-EN 13241-1 section 4.4.2

Wind load resistance class 3 in accordance with PN-EN 13241-1 section 4.4.3

Air permeability class 4 in accordance with PN-EN 13241-1 section 4.4.6

Sound reduction index Rw [dB]

23 / 24 in accordance with PN-EN ISO 717-1: 1999
without a wicket door / with a wicket door

The special shape of the panel protecting fingers from getting crushed, safeguards against breaking of load-bearing cables, safeguard against breaking of
Safeguards
torsion springs (on each spring), wicket sensor used in doors with an electric drive and a wicket. Option: photocells.

Various types of tracks, electric drive, ventilated panel, glazing with an aluminium panel, VISUAL glazing without glazing bars, portholes, glass panes: No-
Optional accessories
Scratch, GREY, SATIN, SAN R, ventilation grilles, wicket doors (low threshold in wicket doors), auxiliary lock, photocells, transmitter.

Maximum width / height of the door [mm] 6000 / 3500

Available panel rib designs low ribs, high ribs, V ribs, without ribs, caisson ribs

Available panel structures woodgrain, smoothgrain, sandgrain, silkline

Available colours: other RAL, special colours, including wood imitating colours, (film coated panels)

Track type N, Sp, St, Sj, SpA, StA, HL, SNP

CONTROL THE GARAGE DOOR

WITH YOUR SMARTPHONE!
The smartCONNECTED technology brings WIŚNIOWSKI automatic sec-
tional garage doors to the next level of product development, tailoring
them to the requirements of increasingly demanding customers. On the
one hand, it makes it possible to control the devices with a smartphone,
and on the other, it gives the users full control and lets them stay in touch
with their home from any place in the world.
io-homecontrol® makes it possible to wirelessly connect the METRO
Smart io and METRO io drive units to the smart home system
controlled by the selected TaHoma Switch central control unit. Building
a comprehensive smart home provides a number of benefits and
additional features that enhance your comfort every single day.

Let us inspire you!

WIŚNIOWSKI Sp. z o.o. S.K.A. See other solutions from WIŚNIOWSKI!
PL 33-311 Wielogłowy 153
tel. +48 18 44 77 111
Fax +48 18 44 77 110 The products shown in this publication often feature special accessories and do not always
correspond to their standard versions • The technical data sheet does not constitute an offer
www.wisniowski.pl/en within the meaning of the Polish Civil Code • The manufacturer reserves the right to introduce
changes without notice • NOTE: The colours shown in the technical data sheet are for reference
only • All rights reserved • Copying and use, in part or in full, is prohibited without the consent
of WIŚNIOWSKI Sp. z o.o. S.K.A. • UniPro/04.24/EN
28 | GARAGE DOORS | UniPro SECTIONAL DOORS