Project:

Client: Made by Date Page

Location PHUC 27-Oct-24
Subject: Checked Revision Job No
ANSI/AISC 360-16 -
Method Design 1ASD LRFD Status: VALID DESIGN
Diagram Internal Force Material
kNm 2
2 Mmax = 2 1 Fy = 345 N/mm
2
Length L = 10.00 m P= 15 kN E= 200 kN/mm
2
Effective length KLb = 5.00 m V= 15 kN G= 77.2 kN/mm
Section parameter
bf tf d tw A Sx-max Sx-min Sy Zx Zy Ix Iy J Cw rx ry
2 3 3 3 3 3 4 4 4 6
mm mm mm mm cm cm cm cm cm cm cm cm cm cm cm cm
300 10 175 12 51 370.76 112.57 150.17 181.88 231.3 1597.5 2252.5 20.08 467.44 5.60 6.65

Stiffened Elements Force P M V

Axial Compression Flexure Internal 15 2 15
Element λ λr Element Class λp λr Element Class Capacity 94.1 29.2 275.2
Web 15.4 18.06 NonSlender 20.22 36.60 compact Status OK OK OK
Flange 15 13.48 Slender 9.15 24.08 Noncompact
Section Class Slender Noncompact P/Pc M/Mc V/Vc
λf= b/2tf λw= (d+tf)/tw E/Fy = 579.7 Combine 0.16 0.06
0.05
λrf = 0.56*sqrt(E/Fy) λpf = 0.38*sqrt(E/Fy) λrf = 1.0*sqrt(E/Fy) 0.13
λrw = 0.75*sqrt(E/Fy) λpw = 0.84*sqrt(E/Fy) λρw = 1.52*sqrt(E/Fy) Status OK OK
Design member for compression Pn = 157.1 kN
Flexural buckling PnF = FcrAe = 1162.9 kN
2
Ae = 51.00 cm Where Section is Slender
Fe = π E/(Lc/r) = 348.73 N/mm2
2 2
Fcr = 228.03 N/mm2
Lc/ry = 75.2 < 4.71*Sqrt(E/Fy) = 113.4
Torsional buckling and Flexuaral - Torsional buckling PnFT = FcrAg = 157.07 kN (This case is not applied)
Fe = (Fey+Fez)[1-Sqrt(1-4FeyFezH/(Fey+Fez)2)]/(2H) = 59.77 N/mm2 Fcr = 30.80 N/mm2
Fex = π E/(Lcx/rx) =
2 2
62 N/mm 2
Coordinate of shear center x0 = 3.8 cm
Fey = π E/(Lcy/ry) =
2 2
349 N/mm2 r02 =x02+y02+(Ix+Iy)/Ag = 90.0 cm2
2 2 2
Fez = (π ECw/Lcz +GJ)/Agr0 = 339 N/mm 2
H =1-(x02+y02)/r02 = 0.84
Design member for flexure Mn = 48.8 kNm
Lb (m) Lp (m) Lr (m) Lp = 1.76rySqrt(E/Fy)
5.00 2.82 9.87 Lr = 1.95(E/Fy)(Sqrt(IyJ)/Sx)(Sqrt(2.36FydSx/(EJ)+1)

Yielding Mn = 62.7 kNm (Case applied: tee stem in tension)

For tee stems and web legs in tension
Mn = Mp =Min(1.6FySx, FyZx)= 62.7 kNm
For tee stems in compression
Mn = My =FySx = 127.9 kNm
Lateral - Torsional Buckling Mn = 82.9 kNm (Case applied: Lp < Lb <Lr)
For tee stems and web in tension Mn = 82.93 kNm
When Lp < Lb < Lr Mn = Mp-(Mp-My)(Lb-Lp)/(Lr-Lp) = 82.9 kNm
When Lb > Lr Mn=Min(My,Mcr) = 62.7 kNm d= 141.9 mm
Mcr =1.95E*Sqrt(IyJ)(B+Sqrt(1+B2))/Lb = 316.4 kNm Where B = 2.3(d/Lb)*Sqrt(Iy/J) = 0.69
For tee stems and web in compression Mn=Min(My,Mcr) = 86.982 kNm
Mcr =1.95E*Sqrt(IyJ)(B+Sqrt(1+B2))/Lb = 87.0 kNm Where B = -2.3(d/Lb)*Sqrt(Iy/J) = -0.69
Flange Local Buckling of Tees Mn = 48.8 kNm (For Noncompact flange)
Case: section with noncompact flange in flexural compression
Mn=[Mp-(Mp-0.7FySxc)(λ-λpf)/(λrf-λpf)] = 48.8 kNm
Case: section with a slender flang in flexural compression (This case is not applied)
2
Mn=0.7ESxc/λ = 70.0 kNm
Local Buckling of Tee Stems Mn = My =FcrSx = 127.91 kNm
Fcr = 345 N/mm2 Where d/tw <= 0.84Sqrt(E/Fy)
Design member for shear (Web buckling without transverse)
X = Sqrt(kvE/Fy) = 26.38 h/t = 14.58 kv = 1.2
Cv2 = 1.00 (Case: h/t <= 1.1X)
Vn = 0.6FydtCv2 = 459.54 kN