Types Of Diodes Varactor Diode
Varactor Diode
Definition: The diode whose internal capacitance varies with the variation of the reverse
voltage such type of diode is known as the Varactor diode. It is used for storing the charge. The varactor
diode always works in reverse bias, and it is a voltage-dependent semiconductor device
The voltage-dependent device means the output of the diode depends on their input
voltage. The varactor diode is used in a place where the variable capacitance is required, and that
capacitance is controlled with the help of the voltage. The Varactor diode is also known as the Varicap,
Voltcap, Voltage variable capacitance or Tunning diode.
Symbol of Varactor Diode
The symbol of the varactor diode is similar to that of the PN-
junction diode. The diode has two terminals namely anode and cathode.
The one end of a symbol consists the diode, and their other end has two
parallel lines that represent the conductive plates of the capacitor. The gap
between the plates shows their dielectric.
Working of Varactor Diode
The Varactor diode is made up of n-type and p-type
semiconductor material. In an n-type semiconductor material,
the electrons are the majority charge carrier and in the p-type
material, the holes are the majority carriers. When the p-type
and n-type semiconductor material are joined together, the p-n
junction is formed, and the depletion region is created at the
PN-junction. The positive and negative ions make the
depletion region. This region blocks the current to enter from
the PN-region.
The varactor diode operates only in reverse bias.
Because of reverse bias, the current does not flow. If the diode
is connected in forward biasing the current starts flowing through the diode and their depletion region
become decreases. The depletion region does not allow the ions to move from one place to another.
The Varactor diode is used for storing the charge not for flowing the charge. In the forward bias,
the total charge stored in the diode becomes zero, which is undesirable. Thus, the Varactor diode always
operates in the reverse bias.
The formula gives the capacitance of varactor diode,
Where, ε – Permittivity of the semiconductor material.
A – area of PN-junction
W – width of depletion region
The capacitance of the varactor diode increases with the increase of n and the p-type region and
decreases with the increases of the depletion region. The increase in capacitance means the more
charges are stored in the diode. For increasing the storage capacity of charge the depletion region (which
acts as a dielectric of the capacitor) of the diode should be kept small.
GURPRIKSHA KALRA 1
Types Of Diodes Varactor Diode
Characteristic of Varactor Diode
The characteristic curve of the varactor diode is shown in the
figure below. The graph shows that when the reverse bias voltage
increases the depletion region increases, and the capacitance of the diode
reduces.
Advantages of Varactor Diode
The following are the advantages of the varactor diode.
The varactor diode produces less noise as less compared to the other
diode.
It is less costly and more reliable.
The varactor diode is small in size and less in weight.
Varactor diode in tunning Circuit
The figure below shows that D1 and D2 are the two Varactor diode. These diodes provide the
variable resistance in the parallel resonance circuit. The Vc is the DC voltage used for controlling the
reverse voltage of the diode.
Where:
The L is the inductance of the circuit, and it is measured in Henry. The resonant frequency of the circuit
is expressed as C1 and C2 is the maximum voltage capacitance of the diode
GURPRIKSHA KALRA 2
