TMA2105F12V1-1
| DUAL BAND 700/850 MHz TWIN TMA, AISG2.0
Designed to be deployed in 700, 850MHz shared antenna
systems, the Kaelus TMA2105F12V1-1 provides gain at both
the 700MHz and 850MHz uplink bands
PRODUCT FEATURES
- Improved base station sensitivity through gain - Hardware and software configuration using
in 700MHz and 850MHz band AISG “personality” upload
- Internal diplexing of the 700MHz and 850MHz
bands allows for single ANT and BTS ports - Fail safe bypass mode with lightning protection
- Rejection of digital TV broadcast channels - High linearity and low noise performance
TECHNICAL SPECIFICATIONS |
| 700MHz DOWNLINK (TX) PATH
Passband 758 - 793MHz
Bandwidth 35MHz
Insertion loss 0.4dB typ
Return loss 18dB min
Group delay variation across band 40ns max
Absolute group delay 80ns max
Nominal propagation delay 52ns
Maximum input power 1x20MHz + 1x15MHz, max AVG Power 120W, Peak Power 1.5kW
Intermodulation @ antenna ports -150dBc max with 2 x 20W carriers (in RX band)
| 700MHz UPLINK (RX) PATH
Passband 703 - 738MHz
Bandwidth 35MHz
Nominal gain 17dB
Minimum gain 16dB
Maximum gain 18dB
Gain variation over frequency, temperature ±1dB max
|1|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
TECHNICAL SPECIFICATIONS CONTINUED |
| 700MHz UPLINK (RX) PATH CONTINUED
Noise figure 1.2dB typ, 1.6dB max
Return loss 18dB min operating, 12dB min in bypass
Bypass loss 2.6dB typ, 3.6dB max
Group delay variation across passband 150ns max
Absolute group delay 250ns max
Nominal propagation delay 139ns
Output IP3 +32dBm typ
P1dB +16dBm min
Maximum input power with no damage +27dBm max
RX in filter rejection 48dBmin, 60dB typ @ 50 – 690MHz (DTV)
RX in filter rejection 50dB @ 813-819MHz (Land Mobile Radio)
RX in filter rejection 25dB @ 843.5-866MHz (STL)
RX out filter rejection 20dB @ 50 – 690MHz (DTV)
| 850MHz DOWNLINK (TX) PATH
Passband 870 - 885MHz
Bandwidth 15MHz
Insertion loss 0.45dB typ
Return loss 18dB min
Group delay variation across band 30ns max
Absolute group delay 80ns max
Nominal propagation delay 50ns
Maximum input power 2x80W 5MHz WCDMA 32 DPCH Carriers. Peak Power 3.2kW
Intermodulation @ antenna ports -150dBc max with 2 x 20W carriers (in RX band)
| 850MHz UPLINK (RX) PATH
Passband 825 - 840MHz
Bandwidth 15MHz
Nominal gain 15.5dB min
Minimum gain 14.5dB
Maximum gain 16.5dB
Gain variation over frequency, temperature ±1dB max
Return loss 18dB min operating, 12dB min in bypass
Noise figure 1.5dB typ, 2.0dB max
Bypass loss 3.1dB typ, 3.6dB max
Group delay variation across passband 200ns max
Absolute group delay 350ns max
|2|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
TECHNICAL SPECIFICATIONS CONTINUED |
| 850MHz UPLINK (RX) PATH CONTINUED
Nominal propagation delay 216ns
Output IP3 +32dBm typ
P1dB +16dBm min
Maximum input power with no damage +27dBm max
RX in filter rejection 48dBmin, 60dB typ @ 50 – 690MHz (DTV)
RX in filter rejection 50dB @ 813-819MHz (Land Mobile Radio)
RX in filter rejection 25dB @ 843.5-866MHz (STL)
RX out filter rejection 20dB @ 50 – 690MHz (DTV)
| ELECTRICAL GENERAL
Impedance 50ohm
System attenuation 45dBmin, 70dB typ @ 50 – 690MHz (DTV)
| POWER SUPPLY AND ALARM (CURRENT ALARM MODE, DEFAULT)
Current window alarm mode (CWA) is the default operating mode and can be configured to specific customer
requirements. The F12V1 personality is configured so that both channels are independently powered and monitored
via the respective BTS port. The BTS port sinks additional current to indicate an alarm state in its uplink path.
Normal operating and alarm current values are configured independently via a field-loadable personality file. Please
contact Kaelus for more information.
DC supply voltage 8.5V to 30V DC, case is DC ground
DC supply voltage via BTS-RF cable Through BTS connectors
150 ± 20mA per port
DC supply current, normal mode
1.3W @ 8.5V, 4.5W @ 30V typ
220 ± 20mA per port (programmable)
DC supply current, alarm mode
3.3W @ 15V per port typ
| AISG MODE OF OPERATION (AUTO SELECTED ON VALID AISG 2.0 FRAMES)
AISG signals can be applied to either BTS1 or BTS2 ports. The TMA2105F12V1-1 unit switches to AISG mode when
valid frames are detected on one of the BTS ports. Both LNAs take DC power from the port with AISG frames or, if
DC is present on both ports, both channels supply equal power to the TMA2105F12V1-1.
DC supply voltage +8.5V to +30V DC
AISG version 2.0 (1.1 optional)
Supply current, AISG mode 220mA @ 8.5V, 70mA @ 30V typ
Voltage drop, BTS to AISG port 1.5V max at 2A
Power consumption, AISG mode 1.9W @ 8.5V, 2.1W @ 30V typ
AISG connector current rating < 4A peak, 2A continuous, pin 6
Field firmware upgradable Yes
|3|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
TECHNICAL SPECIFICATIONS CONTINUED |
| AUTOSENSING FUNCTION ON ANT 1 PORT (AISG MODE ONLY)
When a valid AISG signal is applied to either of the BTS ports, the TMA2105F12V1-1 communicates in AISG mode
and applies DC/AISG to the ANT1 port. If a low resistance is detected on ANT1 port, DC/AISG is subsequently
disconnected from the ANT1 port. In CWA mode, the autosensing switch is open and no DC will be passed ANT1.
Current “Autosense +
Mode of
Draw on Assumption Protection” Comment
Operation
ANT1 Port Switch Status
CWA No DC will be passed on to
ANY Unit in CWA mode Open
Mode ANT1
Device present or open
AISG AISG signal (sub-carrier) will
Current<4A circuit on ANT1 Close
Mode be supplied thru to ANT1
Unit in AISG Mode
Attempts are made
DC short circuit or low
AISG Current periodically to re-connect.
DC resistance present Open
Mode >4A TMA2105FxxVx-1 will
on ANT1 port
operate in AISG mode.
| ENVIRONMENTAL
For further details of environmental compliance, please contact Kaelus.
Operating temperature range -10ºC to +55ºC | 14°F to +131°F
Ingress protection IP67
Altitude 2,600m | 8,530ft
RF port: ±5kA max (8/20us), AISG port: ±2kA max (8/20us)
Lightning protection
IEC61312-1
MTBF >1,000,000 hours
Compliance EMC:EN301 489, ETSI EN 300 019 class 4.1, RoHS
| MECHANICAL
355 x 275 x 180mm | 13.98 x 10.83 x 7.09in
Dimensions H x D x W
(without connectors & brackets)
Weight, (kg | lb) 21kg | 46lbs
Finish Powder coated, light grey (RAL7035)
Connectors DIN 7-16 (F) x 4 long neck, AISG (F) x 1
Pole/wall bracket supplied with two metal clamps 55-178mm
Mounting
diameter poles
ORDERING INFORMATION |
Kaelus Part Number Kaelus Description
TMA2105F12V1-1 Dual Band 700/850 MHz Twin TMA, AISG 2.0
|4|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
ELECTRICAL BLOCK DIAGRAM |
ANT1 ANT2
AUTOSENSE &
PROTECTION
850MHz 850MHz
700 MHz 800 MHz 700 MHz 800 MHz
AISG
AISG
CONTROL
DC
AISG +
RS485
BTS1 AISG BTS2
|5|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
MECHANICAL BLOCK DIAGRAM |
275 [10.8]
170 [6.7]
412 [16.2]
457 [18.0]
355 [14.0]
EARTH AISG
THIRD ANGLE
PROJECTION
180 [7.1]
208 [8.2]
DIN 7-16(F)x4
BREATHER
Information contained within this datasheet is valid at the time of release and may be reviewed by Kaelus at any time.
|6|
© 2014 Kaelus. All Rights Reserved.
www.kaelus.com
TMA2105F12V1-1 ISSUE 2.DOCX
