V2-W RF CCT
Dual Color LED Mini RF Controller
● 2 channel constant voltage dual color LED mini RF controller.
● 1.5A per channel, output connect with 5 meters dual color LED strip, max output power 75W.
+
● Match with RF 2.4G single zone or multiple zone dual color remote control. r
W
W
C
W
o lle
ntr
Co
● One RF controller accept up to 10 remote control. V
W L
2- CTC
ED
DC o
4V , T
tal
Max
.3A
RF -2 /CH
:12 .5A
Uin t: 1
tch Iou
● 4096 levels 0-100% dimming smoothly without any ash. V+
Ma
utt
IInnp
● Auto-transmitting function: Controller automatically transmit signal to another controller V-
with 30m control distance.
● Synchronize on multiple number of controllers.
RED 2 channel constant voltage / Max 75W / Step-less dimming / Wireless remote control
Technical Parameters
Input and Output Dimming data Safety and EMC
Input voltage 12-24VDC Input signal RF 2.4GHz ETSI EN 301 489-1 V2.2.3
EMC standard (EMC)
Output voltage 12-24VDC Control distance 30m(Barrier-free space) ETSI EN 301 489-17 V3.2.4
Output power Max. 75W Dimming gray scale 4096 (2^12) levels Safety standard EN 62368-1:2020+A11:2020
Output type Constant voltage Dimming range 0 -100% Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Environment Dimming cur ve Linear Certi cation CE,EMC,RED
Operation temperature O O
Ta: -30 C ~ +55 C PWM Frequency 1000Hz (default) Package
O
Case temperature (Max.) Tc: +85 C Warranty Size L90x H130mm
IP rating IP20 Warranty 5 years Gross weight 0.013kg
Dimension
60.00 mm
14.00 mm
Wiring Diagram
AC100-240V
V+ +
Power Supply +
12-24VDC Input
V2-W WW WW
CW 5m dual color LED strip
Constant Voltage V- CW
CCT remote
Match Remote Control
End user can choose the suitable match/delete ways. Three options are offered for selection:
Use the controller’s Match key Use Power Restart
Match: Match:
Short press match key, immediately press on/off key (single zone remote) Switch off the power of the receiver, then switch on power.
or zone key (multiple zone remote) on the remote. Immediately short press on/off key (single zone remote)
The light blinks 3 times means match is successful. or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete: Delete:
Press and hold match key for 5s to delete all match, Switch off the power of the receiver, then switch on power.
The light blinks 5 times means all matched remotes were deleted. Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Another way to match:
The receiver is power on for five consecutive times,
the LED strip light start blinking slowly for 10s,
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) on the remote.
The light blinks 3 times means match is successful.
User Manual Ver 2.0.3 Page 1
2023.9
Application notes
1. All the receivers in the same zone.
V+ + V+ + V+ +
Input WW Input WW Input WW
V- CW V- CW V- CW
30m 30m 30m
RF remote
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m,
the remote control distance can be limitless.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Zone 1 Zone 2 Zone 3 Zone 4
30m 30m
V+ + V+ + V+ + V+ +
Input WW Input WW Input WW Input WW
V- CW V- CW V- CW V- CW
RF remote
Dual color control
WW=Warm white LED
CW=Cool white LED
Each channel can supply up to 120W(@24V) and white balance can be controlled as such:
Color temperature Cool white Neutral white Warm white
Power distribution WW=0W,CW=120W WW=60W,CW=60W WW=120W,CW=0W
Linear dual color tuning Dimming curve
100
100
Gamma=1.0
90
90
80
80
Warm white(Min. 2700K)
70
70
PWM duty(%)
duty(%)
60
60
50
50
Neutral white(4000K)
PWM
40
40
Cool white(Max. 6500K) 30
30
20
20
10
10
10 20 30 40 50 60 70 80 90 100
Recommended CCT range Brightness(%)
Malfunctions analysis & troubleshooting
Malfunctions Causes Troubleshooting
1. No power. 1. Check the power.
No light
2. Wrong connection or insecure. 2. Check the connection.
Wrong color 1. Wrong connection of WW/CW wires. 1. Reconnect WW/CW wires.
1. The battery has no power. 1. Replace battery.
No response
2. Beyond controllable distance. 2. Reduce remote distance.
from the remote
3. The controller did not match the remote. 3. Re-match the remote.
InstallationPrecautions
1. The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect lifespan of the products due to poor heat dissipation.
2. The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid radiation interference of the switching power supply.
3. The installation height shall be ≥ 1m from the oor to avoid shortening the remote control distance due to too weak reception signal.
4. The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remotedistance.
5. Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.
User Manual Ver 2.0.3 Page 2
2023.9
