User manual EN

This manual contains important information on the safe operation of the device. Read
and follow the safety advices and instructions given. Retain the manual for future refer-
ence. If you pass the device on to others please include this manual.
Tour Guide Mini Transmitter

Safety instructions
Intended use • in extremely dusty or dirty areas
This device is used to transform acoustic signals into radio signals and transmit • at locations where the unit can become wet
them. Any other use or use under other operating conditions is considered to be • near magnetic fields
improper and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Interference with other electrical equipment
Danger for children Using the device near radios or TV sets may cause interference. Then increase the
Ensure that plastic bags, packaging, etc. are disposed of properly and distance between the devices.
are not within reach of babies and young children. Choking hazard! General handling
Ensure that children do not detach any small parts (e.g. knobs or the • To prevent damage, never use force when operating the switches and controls.
like) from the unit. They could swallow the pieces and choke! Never let unat- • Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use
tended children use electrical devices. liquid cleaners such as benzene, thinners or flammable cleaning agents.
Where to use the product Keep foreign substances from the unit!
Never use the product Keep the device away from containers with liquids. Should any liquid get into the unit,
• in direct sunlight this could lead to its destruction or fire. Be sure not to let any metal objects into the
• in conditions of extreme temperature or humidity unit.

Features
• 16 transmission channels selectable • Micro USB charging connector
• 3.5 mm mini phone input socket • 11 hours operating time per battery charge
• Fixed built-in rechargeable lithium polymer battery (3.7 V • 1300 mA)

Operating elements

1. Antenna
2. LCD
3. Channel selection / volume down
4. On / off switch | calling up setting parameters
5. Channel selection / volume up
6. Head set connection
7. Eyelet for lanyard
8. Micro USB charging connector

Using the device

1. Use an appropriate USB charging station to charge the device. A full charge of 7. To change the input sensitivity from ‘Mic’ (default) to ‘Line’ keep the – button (3)
the built-in battery takes about 6 hours. pressed for five seconds until the symbol flashes.
2. Connect the cable from a microphone or line level source to the 3.5 mm mini 8. When the battery is fully charged, the display shows . When this icon is
phone socket (6). flashing, only 10 % battery power are remaining and you need to charge the
3. Keep the on / off button (4) pressed for two seconds to turn the unit on. The battery. During charging, this icon appears:
display (2) lights up and indicates the current transmission channel.
4. To select another channel keep the + / – buttons (5, 3) simultaneously pressed
for two seconds. The CH indicator flashes on the display and the icon 9. The unit turns off during charging. To use it during charging, keep the on / off
disappears. Use the + / – buttons to select the desired channel. button (4) pressed for two seconds to turn the unit on.
5. To confirm the selection, briefly press the on / off button (4) or wait five 10. The unit automatically turns off after 20 minutes without input signal. To turn
seconds for the unit to save the new channel automatically. The CH indicator the device off manually, keep the on / off button (4) pressed for two seconds.
stops flashing and the icon appears again. Make sure that transmitter 11. The minimum distance between receiver and transmitter is 30 cm.
and receiver are always set to the same transmission channel.
6. The volume level is set to 4 by default. 4 levels between
(4) and (full) can be adjusted. To increase the volume press the
+ button (5), to reduce it press the – button (3). Briefly press button 4 to mute
the device.

Technical specifications
NF transmission range: 40 Hz – 18 kHz Charging source: 5 V micro USB
Dynamic range: > 80 dB Charging time: < 6 hours
Modulation: PLL, wideband FM Dimensions (W × H × D): 40 × 82.6 12.1 mm
Carrier frequency range: UHF 500 – 960 MHz Weight: 47 g
Transmitting power 10 mW

For the transport and protective packaging, environmentally friendly materials This product is subject to the European Waste Electrical and Electronic Equip-
have been chosen that can be supplied to normal recycling. Ensure that plastic ment Directive (WEEE) in its currently valid version. Do not dispose of your old
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma- device with your normal household waste. Dispose of this product through an
terials with your normal household waste, but make sure that they are collected for recy- approved waste disposal firm or through your local waste facility. Comply with
cling. Please follow the notes and markings on the packaging. the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 386331_22.06.2016