3-in-1 Wireless Microphone

with Onboard Recording

三合一内录无线麦克风
BOYAMIC

User Manual
用户手册
Statement
Please read this manual carefully before using and strictly operate and
store it in accordance with the instructions. Please save the manual for your
future reference. If you need further assistance than the user manual, please
consult your retailer for help or email us: [email protected]

Cautions
1. DO NOT remove the housing yourself.
2. Please keep it away from heat sources such as radiators or spotlights.
3. Do not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from dust and moisture
places.
6. For the best pick-up pattern, do not hold your hand against the
microphone capsule cover.
General Introduction
The BOYAMIC is a portable 2.4GHz wireless microphone system. It
features high-performance noise cancellation, which is available for
improving the recording effect in a noisy environment. It also boasts a
remarkable onboard recording which is available for storing your
recording files in real-time. The BOYAMIC is perfect for live streaming,
vlogging, mobile journalism, and more. What’s more, equipped with a
low-cut filter, the wireless microphone can eliminate unwanted
low-frequency noise (75Hz/150Hz or lower) in your recording.
It is possible to use BOYAMIC in many ways. You can choose to use the
transmitter with the 3.5mm external microphone, your line input devices,
or its built-in microphone as your needs. A 3.5mm TRS output, USB-C,
and iOS Lightning adapters allow the receiver to connect with cameras,
mixers, smartphones, tablets, laptops, and more. The receiver has a USB-C
charging port that supports charging and powering the device while
using it with the adapters.

Features
• Up to 200 meters of wireless transmission
• Separate noise cancellation control - 48kHz/ 24bit HD audio format
retained
• Wide-range 20-20,000Hz frequency response - deliver exceptional
high-quality sound
• 8GB memory - store up to 15 hours of recording
• Transmitter’ USB-C port - connect to a laptop or smartphone to read
recording files
• Up to 10 hours of operating time (about 6 hours when the onboard
recording is enabled)
• Attach the transmitter can be to your clothes with the included magnet.
• Rotating clasp-type fur windshield, not easy to fall off
• Receiver’s 3.5mm headphone output - monitor your audio in real-time or
playback audio
• High-resolution OLED display - see vital information at a glance
• Selectable Mono/ Stereo/ Safety Track output setting
• 3.5mm TRS analog output, USB-C and iOS Lightning digital output –
universal compatibility with cameras, smartphones and computers
• Charging case included - make the kit easy to carry on
Product Structure
Transmitter

1
2
3 8
4 9
5

6 10

11

➀ Built-in Microphone Capsule

➁ 3.5mm TRS Input
For connecting 3.5mm microphones or line-in devices.
➂ Recording Indicator
Status Indicator
Microphone muted Blinking red
Onboard recording enabled Static red

➃ Status Indicator
Status Indicator
Unpaired Blinking blue slowly
Pairing Blinking blue rapidly
Paired successfully Static blue (Mic input)
Static yellow (Line input)
Noise cancellation enabled Static green
Low battery Blinking red
Charging Static red
Fully charged Red light off
NOTE: Please charge the transmitter when TX indicates low battery status,
or it will automatically shut off within 10 minutes.
➄Power Button
• Press and hold for 2 seconds to power on or off.
• Press to mute or unmute the microphone.
• Press and hold for 5 seconds to enter the pairing state in shutdown mode.
➅Noise Cancellation Button
Press to enable or disable the noise cancellation.
➆Record Button
Press to enable or disable the onboard recording.
➇Magnetic Belt Clip
➈Mic/ Line Input Toggle
➉USB-C Charging Port
Used for charging. After connecting a laptop or smartphone, can also be
used to read the recording files.
⑪Charging Contacts

Receiver

3
4 7

5 8
6 9
10
11

12 13
➀ Status Indicator for Channel A
Status Indicator
Unpaired Blinking blue slowly
Paired successfully Static blue

➁ Belt Clip
➂ OLED Screen
➃ Status Indicator for Channel B
Status Indicator
Unpaired Blinking blue slowly
Paired successfully Static blue

➄Power Button
• Press and hold for 2 seconds to power on or off.
• Press to access the options of the gain or volume. Refer to “Receiver’s
Screen Operations” for more details.
➅M Button
For setting values or functions in the receiver’s menu. Refer to “Receiver’s
Screen Operations” for more details.
➆3.5mm TRS Headphones Port
Connect your headphones to monitor the audio output in real-time or
listen to the playback of the audio.
➇3.5mm TRS Output
For analog audio output to a camera, mixer or recorder, etc.
➈Charging Contacts
➉Connecting Contacts
⑪USB-C Charging Port
For charging the receiver. An external device can be powered and
charged through this port while the receiver with a USB-C or iOS
Lightning adapter is plugged into it.
⑫MFi Certified Lightning Adapter
It can be connected to an iOS Lightning device.
⑬USB-C Adapter
It can be connected to Android Smartphones, Tablets, Computers and
other USB-C devices.
Charging Case

1 2 3

➀ Charging Indicator
Status Battery Level Indicator
Low battery ＜��%
＜��%
��%~��%
Charging

��%~��%
��%~���%
Fully charged ���%

➁USB-C Charging Port

➂Wireless Charging Sector

Receiver’s Screen Operations

Home Screen Overview

• From the Home screen, press the power button to access the options of
the A or B channel gain and output volume in turn press the M button
to adjust the value press the power button again to save the setting.
 Indicates that the receiver is in Mono, Stereo, or Safety Track output mode.

Sounds that are 75Hz (150Hz) or lower will be filtered.

Indicates the receiver’s output volume from 00 to 15. Default to 06.

Indicates that channel A/ B is connected.

Indicates the wireless signal strength between transmitter and receiver.

Indicates that the current channel is disconnected.

Microphone is muted.

Indicates the noise cancellation of the transmitter has been enabled.

Indicates the onboard recording of the transmitter has been

enabled while the icon appears and flashes.

Indicates the corresponding transmitter's mic gain from -6 to +9. Default to 0.

Indicates current audio input level.

Upper right corner: Indicates the receiver’s battery level.

Both sides: Indicates the corresponding transmitter’s battery level.

Menu Introduction
• From the Home screen, press the M button to access the menu page.
Continue to press the M button to turn the page until the receiver returns
to the Home screen.
• From the menu page, press and hold the M button to access options
press it to setting values or functionspress and hold it again to save the
settings. Press the power button to exit the settings or menu page.
• If no operation is performed within 20 seconds on the menu page, the
display will automatically return to the Home screen.
Main Menu Sub Menu Description
Signal from the transmitter or both transmitters can be
Output Mode Mono mixed together and recorded identically to the left and
right tracks.
Signals from each transmitter can be recorded to a
Stereo separate track.
Similar to Mono mode, the audio of the right track will be
Safety Track recorded in -12dB in case of distortion in your recordings.
The mute control of the transmitters’ power button
Enable
is activated.
TX Mute Key
The mute control of the transmitters’ power button is
Disable deactivated to prevent inadvertent operation.
When this mode is activated, the transmitter will start
Enable
recording audio as soon as it is switched on.
Auto Recording
The onboard recording is disabled by default when the
Disable transmitter is switched on.
The output gain level of the receiver can be reduced if
00~15 the sound is distorted. The setting is retained even after
Output Volume the power is turned off. (Default to 06)
75Hz Sounds that are 75Hz or lower will be filtered.
150Hz Sounds that are 150Hz or lower will be filtered.
Low Cut Off /
Every time the receiver is turned on, the feature will be
Speaker Enable enabled by default. Sound can be played directly without
unplugging the receiver inserted into an adapter.
Disable /
• Set the date and time so that all recording files will
Set TX Time A&B Enter
include a time-stamp when exported.
• On the page, press and hold the M button twice to
access the setting page. Press to move the cursor press
and hold to access the options press to adjust the value
press and hold to save the settings. Finally, press it to
move the cursor on “SAVE”, and then press and hold to
confirm and exit. To exit directly, press the power button.

Yes? After selecting Yes, the onboard recording files on the

Format TX A&B transmitters will be erased. Please use it with caution.
It is impossible to format the transmitters while it is
No? recording.

On The backlight always stays on. (Default setting)

10s The backlight will turn off if no operation occurs for

Backlight 10 seconds.

30s The backlight will turn off if no operation occurs for

30 seconds.

60s The backlight will turn off if no operation occurs for

60 seconds.
Language Default to English.
English
 Yes? After selecting Yes, the receiver’s relevant parameters
Reset Default will be restored to the default factory values.
No?
(Please use it with caution.)
Pair Yes? After selecting Yes, the receiver will enter the
pairing state.
No?
Version Indicates the receiver’s software version.

How to Use
1. The transmitter comes with a windproof capsule. It can fit an extra fur
windshield when you need to enhance wind protection outdoors or in a
windy environment. When using a 3.5mm microphone or line-in device,
please connect it to the transmitter’s 3.5mm TRS input jack.

C
D
2. Push the selected adapter into the receiver, and then connect the
receiver to your smartphone, tablet, computer, or other mobile devices. Or
connect a camera or a mixer to the 3.5mm TRS audio output of the receiver
with an adapter cable.

iOS Lightning USB-C

 3.5mm TRS - TRS

3. Press and hold the power buttons for 2 seconds to turn on the
transmitter(s) and receiver.
4. Pairing
The transmitter(s) and receiver are paired by default. If they are
disconnected, please follow the below steps:
➀ Press the receiver’s M button until you turn to the "Pair" menu page.
➁ Press and hold the M button to access the options press to select
"Yes?" press and hold again to save the settings.
➂ To make the transmitter(s) enter the pairing state, press and hold its
power button for 5 seconds in shutdown mode until its status indicator
blinks blue rapidly.
➃ Transmitter(s) and receiver will be successfully paired within 10 seconds.
The transmitter's information and status will be shown on the receiver's
screen.
5. Plug your headphones into the receiver’s 3.5mm headphone port for
audio monitoring as your need.
6. Set Mono, Stereo or Safety Track mode on the receiver’s menu as your
need.
7. It is recommended to record a sample and play it back to check if the
audio level is acceptable before recording.
8. In order to improve the recording effect in a noisy environment, it is
recommended that press the NR button on the transmitter(s) to enable
noise cancellation.
9. After recording, put the transmitter(s) and receiver back into the case for
charging.
NOTE:
➀ If a certain transmitter of BOYAMIC failed to pair, please turn off the
paired transmitter, and then reconnect the unpaired transmitter and
receiver.
➁ Due to the 2.4GHz wireless frequency is widely used, the signal may be
easily attenuated or interfered. Please try to avoid obstacles while using,
such as walls and buildings. And keep away from the devices with 2.4GHz
frequency, such as high-power Wi-Fi antennas, radios, etc.

Onboard Recording
• Press the transmitter’s REC button to enable the onboard recording. Or
activate the “Auto Recording” mode so that the transmitter can start
recording audio as soon as it is switched on.
• The memory can store up to 15 hours of recording at the 48kHz/ 24bit
sampling rate.
• The file will be automatically split after 30 minutes of recording, making
it easy to quickly find your desired recording segment.
• By default, the recording files are named in the format "DATE-TIME.-
WAV". Up to 999 recording files can be created.
• If the 8GB memory is full, the original file will be automatically
overwritten with the latest file from the beginning.
HINT:
➀ Note that in this mode, the "mute" function will not affect the onboard
recording.
➁ The recording files cannot be read when the onboard recording is on.
➂The onboard recording will be disabled automatically once the
transmitter is placed in the charging case.
Troubleshooting
If you encounter problems when using the unit, please refer to the
following checklist before contacting technical support. If the problem
cannot be solved, please contact the dealer's after-sales service
department.
• If there is no sound from the unit or no sound when connected to an
external device
➀ Make sure the receiver or the adapter on the receiver is well connected
to your device. Or remove the adapter and wipe the contacts with a clean
cloth.
➁ Make sure the mic gain or output volume is not turned to the minimum.
➂ Make sure the unit is not muted.
• If the sound of the unit is too low or too loud or even distorted
➀ Adjust mic gain and output volume to the suitable level for recording in
the current environment to improve the recording effect.
➁ If you are recording in noisy environment, it is recommended to enable
noise cancellation to improve the recording effect.
• Current noise or other abnormal noise appears during monitoring
Make sure there is no interference near the unit. If the noise still exists
after changing the unit's position, please contact our customer service.
• The operating range of the unit is limited and the sound is frequently
intermittent
Make sure there is no interference between the transmitter(s) and the
receiver. If the intermittent sound still occurs frequently, please contact
our customer service.
• The receiver with an adapter cannot playback output for monitoring
Make sure your phone's speaker is disabled in the receiver's menu.
• Howling noise occurs when using the receiver with an adapter
Make sure your phone's speaker is disabled in the receiver's menu.
Failed to charge the transmitter(s) or receiver via the charging case
➀ Make sure the charging contacts of both are in full contact. Wipe the
charging contacts with a clean cloth and try again.
➁ If you want to check whether the magnetic force is aging or whether
the charging contacts of the two are not in sufficient contact, press the
transmitter(s)/receiver placed in the charging case to check whether it is
in a charging state. If the transmitter(s) or the receiver is still failed to be
charged, please contact our customer service.
In the Box

Transmitter ×2 Receiver ×1 Charging Case ×1

MFi Certified USB-C Adapter Magnet Fur Windshield

Lightning Adapter ×1 ×1 ×2 ×2

3.5mm TRS to 3.5mm USB-A to USB-C USB-A to Carrying

TRS Audio Cable ×1 Cable ×1 USB-C Adapter ×1 Pouch × 1

Lavalier Mic Clip for Lavalier Foam Windscreen

Microphone ×2 Microphone ×2 for Lavalier Microphone ×2
Specifications
Transmitter

Transmission Type 2.4GHz digital frequency

Modulation GFSK

Polar Pattern Omnidirectional

Operating Range Up to 200m (Measured in open environment without

obstacles and interference.)
RF Output Power 10mW
Frequency Response 20Hz-20kHz

Maximum SPL 120dB SPL

Sampling/ Bit Rate 48kHz/ 24bit

Sensitivity -32dB±2dB

Signal-to-Noise Ratio >90dB

Distortion 0.07%

Audio Input Built-in microphone capsule; 3.5mm TRS mic input or line input

Power Requirements Built-in lithium-ion battery/ Charging contacts/

USB-C charging port (DC 5V)

Battery Capacity 220mAh

Approx. 6 hours (onboard recording enabled)
Battery Life Approx. 10 hours (onboard recording disabled)

Charging Time Approx. 1.5 hours

Memory 8GB

Maximum Recording Time Stored Approx. 15 hours

Recording Format WAV

Weight Approx. 24g

Dimensions 47mm×29mm×13.5mm

Operating Temperature 0°C to +50°C

Storage Temperature -10°C to +50°C

Receiver
Display OLED

Transmission Type 2.4GHz digital frequency

Modulation GFSK

Polar Pattern Omnidirectional

Operating Range Up to 200m (Measured in open environment without

obstacles and interference.)
RF Output Power 10mW

Frequency Response 20Hz-20kHz

Sampling/ Bit Rate 48kHz/ 24bit
Signal-to-Noise Ratio >90dB
Distortion 0.07%
Audio Output 3.5mm TRS output/ MFi certified Lightning adapter/ USB-C adapter
Monitor Port 3.5mm TRS headphone port
Built-in lithium-ion battery/ Charging contacts/
Power Requirements
USB-C charging port (DC 5V)
Battery Capacity 300mAh

Battery Life Approx. 11 hours

Charging Time Approx. 1.5 hours

Weight Approx. 29g

Dimensions 46mm×34mm×19mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C

Charging Case
Battery Capacity 1800mAh

Charging Time Approx. 2.5 hours

Charging Connector USB-C charging port (DC 5V)/ Wireless charging

Times for Charging Microphone 1.2 times (2*TX+1*RX)

Weight Approx. 180g

Dimensions 115mm×56.2mm×68.5 mm

Operating Temperature 0°C to +50°C

Storage Temperature -10°C to +50°C

声明
请在使用前仔细阅读本手册，并严格按照说明进行操作和存储。请妥善保存好说明书
以供将来参考。如果用户手册不能帮助您解决某些问题，请向零售商寻求帮助或给我
们发送电子邮件：[email protected]

注意事项
�. 请勿擅自拆开机壳；
�. 请勿将本机靠近热源，如散热器、聚光灯或其他产生热量的设备；
�. 电池不可自行更换；
�. 请使用柔软的干布清洁本设备；
�. 在使用和储存时，请注意防尘和防潮。
�. 为获得最佳拾音效果，请勿将手放在麦克风咪头上。
概述
BOYAMIC是一套便携式�.�GHz无线麦克风系统，不仅具有高性能降噪功能，从容应对
嘈杂的录音环境，还支持板载录音，可以对录音文件实时存档，适用于直播、Vlog拍摄、
移动新闻等应用场景。 另外，此无线麦克风还配置了低频剪切滤波器（��Hz/���Hz）
，
可消除环境中不想要的低频噪音。
使用方式多样，除内置麦克风外，发射器也可搭配�.�mm外接麦克风/线性输入设备使
用。接收器除�.�mm TRS输出孔以外，还附有Type-C、iOS Lightning两种转接头供选
择，广泛兼容相机、混音器、智能手机、平板、电脑等设备。 在与转接头一起使用时，接收
器支持一边录制一边给外接设备充电。

特点
·无线传输距离达���米
·一键降噪，且支持��kHz/��bit高清音频格式
·��-��,���Hz频响范围，高品质还原真实声音
·内置�GB储存芯片，最高支持板载录音时长约为��小时
·发射器Type-C口支持连接电脑/手机等读取录音文件
·��小时超长续航（板载录音功能开启后约为�小时）
·发射器背夹可搭配磁吸片吸附在衣领上使用
·旋转卡扣式防风毛套，安装牢固不易脱落
·接收器支持接入�.�mm耳机实时监听
·高分辨率OLED屏幕，重要信息一目了然
·自由切换单声道/立体声/安全音轨输出模式
·�.�mm TRS模拟输出 & Type-C、iOS Lightning数字输出
⸺广泛兼容相机、手机、电脑等
·配套充电盒，便于出行携带
产品结构
发射器

1
2
3 8
4 9
5

6 10

11

➀内置麦克风 注意：发射器处于低电量时请及时充电，
➁�.�mm TRS输入孔 否则发射器将在��分钟内自动关机。
用于连接其他�.�mm麦克风/线性输入设备。 ➄电源键
➂录音指示灯 长按�秒开/关机；短按开启/关闭静音模式；
状态 指示灯 关机状态下长按�秒进入配对模式。
静音模式开启 红灯闪烁 ➅降噪键
短按开启/关闭降噪功能。
板载录音开启 红灯常亮
➆录制键
➃状态指示灯 短按开启/关闭板载录音功能。
状态 指示灯 ➇磁吸背夹
未联机 蓝灯慢闪 ➈麦克风/线性输入模式切换键
➉Type-C数据接口
对码中 蓝灯快闪
用于充电，也可用于连接至电脑或手机读
联机成功 蓝灯常亮（麦克风输入）
取录音文件。
黄灯常亮（线性输入） ⑪充电触点
降噪开启 绿灯常亮
低电量 红灯闪烁
充电中 红灯常亮
充满电 红灯熄灭
接收器

3
4 7

5 8
6 9
10
11

12 13

➀A通道状态指示灯 收器屏幕介绍” ）。
状态 指示灯 ➆�.�mm TRS耳机孔
未联机 蓝灯慢闪 接入耳机可实时/回放监听音频。
➇�.�mm TRS输出孔
联机成功 蓝灯常亮
输出模拟音频至相机、混音器、录音笔等设备。
➁背夹 ➈充电触点
➂OLED显示屏 ➉连接触点
➃B通道状态指示灯 ⑪Type-C充电接口
状态 指示灯 用于给接收器充电。 当带有Lightning或
未联机 蓝灯慢闪
Type-C转接头的接收器插入外接设备时，
可通过此充电端口为外接设备充电。
联机成功 蓝灯常亮
⑫MFi认证Lightning转接头
➄电源键 适配带Lightning接口的iOS设备。
长按�秒开/关机；短按可进入增益/音量 ⑬Type-C转接头
调节选项 （详情请参考
“接收器屏幕介绍”）。 适配安卓手机、平板或其他带Type-C接口
➅M键 的设备。
可调整接收器菜单设置（详情请参考“接
充电盒

1 2 3

➀充电指示灯
状态 电量 指示灯
低电量提示 ＜��%
充电中 ＜��%
��%~��%
��%~��%
��%~���%
充满电 ���%

➁Type-C充电接口
➂无线充电区域
接收器屏幕介绍

主界面预览

·在主界面，短按电源键可轮流进入A/B通道增益调节和输出音量调节选项→短按M键
可调节数值→再次短按电源键保存设定。

接收器处于单声道/立体声/安全音轨输出模式

发射器将过滤掉��Hz或���Hz以下的低频声音

显示接收器输出音量，范围为��~��，默认设定为��档

表示A/B通道已连接

当前发射器与接收器之间的无线信号强度

表示当前通道未连接

表示发射器已静音

表示发射器降噪功能已开启

该图标闪烁时，表示发射器板载录音功能已开启

显示A/B通道对应的发射器麦克风增益，范围为-�~+�，默认设定为�档

显示当前音频输入电平

界面右上角表示接收器电量

界面两边分别表示A/B通道对应的发射器电量
菜单介绍
·在主界面，短按M键可进入菜单，继续短按可切换不同菜单页，直到退回至主界面。
·在菜单页，长按M键进入选项→短按M键调整各参数值或功能→再次长按M键保存设
定；短按电源键可退出设置或直接退出菜单页。
·如果超过��秒不操作，显示屏将自动跳转回主界面。
主菜单 子菜单 说明
输出模式 单声道 左右声道输出的内容一致
立体声 左右声道输出分别对应发射器A和B两个声源
安全音轨 右声道的输出增益比左声道小��dB，以防声音过爆
TX静音开关 开启 启用发射器电源键的静音功能
关闭 禁用发射器电源键的静音功能，防止误触
自动录音 开启 发射器开机自启动板载录音功能
关闭 发射器开机时板载录音功能默认关闭
输出音量 ��~�� 若声音过爆，优先调小接收器输出音量，参数设定在电源关闭
后仍保留（默认设定为��档）
��Hz 发射器将自动过滤掉��Hz以下的低频声音
低切
���Hz 发射器将自动过滤掉���Hz以下的低频声音
关闭 /
开启 接收器每次开机时，外放功能都默认开启，无需拔掉带有转接
外放
头的接收器即可直接外放手机音频。

关闭 /
TX时间设置 A&B 设置日期和时间可以让所有录音文件在导出时都包含时间戳。
在此菜单页，分别长按两次M键进入设置界面；短按M键移动
进入 光标→长按进入选项→再次短按调整数值→再次长按保存
设定；短按M键移动光标至“确认”→长按M键保存并退出设置
界面。若想直接退出设置，短按电源键即可。
格式化TX A&B 是？ 选择“是”
，发射器板载录音文件将被清除。
（请谨慎使用此功能）
否？ 发射器处于录音状态时无法被格式化。
背光时间 常亮 屏幕背光总是亮起（默认设定）
��秒 屏幕背光将在未进行操作��秒后熄灭
��秒 屏幕背光将在未进行操作��秒后熄灭
��秒 屏幕背光将在未进行操作��秒后熄灭
语言设置 简体中文 默认设置为“English”
English
恢复出厂设置 是？ 恢复出厂设置后，接收器的相关参数将被恢复到默认出厂值。
否？ （请谨慎使用此功能）
对码 是？ 选择“是”
，接收器进入对码状态
否？
版本号 显示接收器的软件版本号
操作指南
�. 发射器支持裸机运动防风。 在户外录音或有风的环境下，若想要更清晰的录音效果，
可将防风毛套安装至发射器内置麦克风上。 使用�.�mm麦克风/线性设备时，需连接至
发射器的�.�mm TRS音频输入孔。

C
D
�.选择对应的转接头安装到接收器的凹槽，然后连接至手机、平板、或电脑等设备。
或使
用�.�mm TRS音频线将相机、混音器等设备连接至接收器的音频输出孔。

iOS Lightning USB-C

NR
 3.5mm TRS - TRS

�.长按电源键�秒，将发射器、接收器开机。
�.配对
发射器和接收器出厂前已配对成功。
若其断开连接，请进行如下配对操作：
➀短按接收器M键，直至翻到“对码”菜单页；
➁长按M键进入选项，短按M键切换至“是？
”，再次长按M键确定选择；

➂在发射机关机状态下长按其电源键�秒进入配对状态，待指示灯呈蓝灯快闪时松手；
➃发射器和接收器将在��秒内完成配对，接收器屏幕会显示发射器的信息状态。
�.根据需求，可将您的耳机连接至接收器的�.�mm耳机孔进行音频监听。
�.根据需求，可在接收器软件菜单里设置单声道/立体声/安全音轨输出模式。
�.建议在正式录音前做个简短的录音测试，检查音频水平是否可以接受。
�.若录音环境嘈杂，还可以短按发射器降噪键 NR 开启降噪模式，提高录制效果。
�.录制结束后，可将发射器/接收器放入充电盒中进行充电。
注意：
➀若BOYAMIC在对码过程中出现某一台发射器配对不成功的情况，则需要将已对
码的发射器关机后，再将未对码的发射器与接收器进行重新配对。
➁由于在�.�GHz频谱下，信号很容易受干扰，请尽量避开墙壁和建筑物等障碍物，避
免接近�.�GHz频率的设备，如大功率Wi-Fi天线、收音机等。

板载录音
·短按发射器侧面的录制键 REC 即可开启板载录音功能；也可提前在接收器菜单中
设置板载录音在发射器开机时自启动。
·在��kHz/��bit采样率下，最高支持板载录音时长约为��小时。
·录音满��分钟后将自动分割文件，便于快速查找想要的录音片段。
·录音文件默认命名格式为”年-月-日-时-分-秒.WAV”
，最高支持���个录音文件。
系统
时间可在接收器菜单中提前设置。
·内置存储芯片可保存约�GB的音频文件，内存录满后将自动循环覆盖。
注意：
➀开启静音模式并不会影响板载录音功能。
➁发射器板载录音功能开启时不可读取文件，其余状态下均可读取文件。
➂发射器放入充电盒充电时会自动关闭板载录音功能。
故障排除
在使用本机的过程中出现任何问题，请参照以下内容加以解决。如果此手册仍然无法
解决您遇到的问题，请与我们当地的经销商售后服务部联系。
·本机无声音
➀检查产品是否连接正常以及转接头是否有松动；或者将转接头取出，用干净的布擦
拭连接触点。
➁检查增益/音量是否被调至最低。
➂请验证本机是否开启了静音模式。
·本机声音过小或过大甚至破音
➀通过调节增益、音量，找到最适合当前环境录制的档位，提高录制效果。
➁若录音环境较为嘈杂，可开启发射器的降噪模式，提高录制效果。
·监听时有不干净的电流声或异常噪音等
请检查本机附近是否有干扰源；若本机更换使用位置后还是有噪音，请联系客服咨询。
·产品的使用距离受限且声音频繁断续
查看发射器、接收器之间是否有干扰源，将产品更换使用位置再次确认，若声音还是频
繁断续，请联系客服咨询。
·使用带有转接头的接收器时无法进行回放监听
检查接收器是否开启了手机外放功能。
外放功能开启时无法通过接收器进行回放监听。
·使用带有转接头的接收器时有啸叫声
检查接收器是否开启了手机外放功能。
外放功能开启时可能会产生啸叫现象。
·充电盒无法给发射器/接收器充电
➀检查充电触点是否接触不到位，可用干净的布擦拭充电触点后再次进行验证。
➁检查磁力是否老化、充电触点是否接触不到位，可通过手按压发射器/接收器验证其
能否进入充电状态。若仍然无法充电，请联系客服咨询。
 包装清单

发射器 ×� 接收器 ×� 充电盒 ×�

MFi认证Lightning Type-C转接头 磁吸片 防风毛套

转接头 ×� ×� ×� ×�

�.�mm TRS转 USB-A转Type-C USB-A转Type C端子

�.�mm TRS音频线 ×� 数据线 ×� ×�

领夹麦 麦克风夹子 领夹麦防风海绵 收纳袋

� � � �
参数

发射器
传输方式 �.�GHz数字频段
信号调制 高斯频移键控
极性模式 全向型
操作范围 最远至���米（在无障碍无干扰空旷环境测得）
射频输出功率 ＜��mW
频率响应 ��Hz-��kHz
最大声压级 ���dB SPL
采样率/位深 ��kHz/ ��bit
灵敏度 -��±�dB
信噪比 ＞��dB
失真 ＜�.��%
音频输入 内置麦克风；�.�mm 外接麦克风/线路设备输入
供电方式 内置锂电池供电/ 充电盒触点充电/ Type-C充电口
（直流电 �V）
电池容量 ���mAh
续航时长 约��小时（板载录音关闭）; 约�小时（板载录音开启）
充电时长 约�.�小时
内存容量 �GB
最高存储录音时长 约��小时
录音格式 WAV
重量 约��g
尺寸 ��mm×��mm×��.�mm
工作温度 �°C to ��°C
贮存温度 ‒��°C to ��°C
接收器
显示屏 OLED
传输方式 �.�GHz数字频段
信号调制 高斯频移键控
操作范围 最远至���米（在无障碍无干扰空旷环境测得）
射频输出功率 ＜��mW
频率响应 ��Hz-��kHz
采样率/位深度 ��kHz/ ��bit
信噪比 ＞��dB
失真 ＜�.��%
音频输出 �.� mm TRS输出孔/ MFi认证Lightning转接头/ Type-C转接头
监听接口 �.�mm TRS耳机孔
供电方式 内置锂电池供电/ 充电盒触点充电/ Type-C充电口（直流电 �V）
电池容量 ���mAh
续航时长 约��小时
充电时长 约�.�小时
重量 约��g
尺寸 ��mm×��mm×��mm
工作温度 �°C to ��°C
贮存温度 ‒��°C to ��°C

充电盒
电池容量 ����mAh
充电时长 约�.�小时
供电方式 Type-C充电口（直流电 �V）/ 无线充电
可供循环充电次数 �.�次（�*TX+�*RX）
重量 约���g
尺寸 ���mm×��.�mm×��.� mm
工作温度 �°C ~ +��°C
贮存温度 -��°C ~+ ��°C
www.boya-mic.com V03

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned
by Shenzhen Jiayz Photo Industrial., Ltd.
深圳市长丰影像器材有限公司
地址:深圳市观澜街道章阁大富路智能终端产业园A��栋
TEL: 400 6131096
Email: [email protected]
www.boya-mic.com / www.jiayz.com