How to delete a waypoint ?
Via the context menu of the waypoint or via the context menu in the waypoint table.
Which statement about the Safety contour is correct?
If the current safety contour value entered in Anti-Grounding section does not match the planned leg
safety contour, it will be displayed in orange in the info Label.
What has to be connected to ECDIS to enable ECHO REFERENCE MODE?
RADAR
The watch handover checklist can be opened via…
The Nav menu in Toolbar
What is the purpose of AIO?
To present T&P where are located. *NOT AS USER CHART
How do you open wind display?
Context menu of own ship symbol.
Where you can check the chart update status?
Chart loader
Manual correction on the chart – Chart loader
Go to position – Context menu of the chart
FTP function – satellite system
How do you ensure that ECDIS system is accurate and up to date?
All statements – by using multiple sources of data, test and checks and updating database
Is the IMO category base intended to be sufficient for safe navigation?
None of the answers is correct
What happen when the MOB button is activated?
The ship’s position is highlighted, a mark is set and an info label is open.
What are antigrounding values used for, in Planning mode?
For the chart display and route check.
How the split screen is activated?
None – not settings in taskbar, not chart settings button, not via integrator
Pick report?
All answers – always available, enables position and details of an object
Which statement about AIO is correct?
All of them – do not rely on them alone, create user chart for your route separately, check against T/P.
How is the overscale status indicated?
By a pattern of thin black vertical lines.
Which attributes related to user chart objects can be detected by look-ahead option?
Depth and dangerous
Which statement about discrepancy setting for the main and secondary position input is correct?
If the secondary position is ER, the value can be higher.
What purpose does the additional coverage check have?
To detect weather all charts for the route are available and up-to-date.
Which sensors are mandatory for ECDIS?
GNSS, speed log, gyro compass.
When will additional “Overscale” message appear in the top info box.
When the overscale factor reaches 2.
Under display you can:
All answers are correct – split screen, change orientation for north up to head up, change from true to
relative motion
Immediate actions if jamming and spoofing are detected.
If unable to ascertain vessel’s position relative to navigational hazard, stop the vessel
How is the distance line function activated
Via the context menu of the own ship symbol in S-mode/Sailing mode
How do you open waypoint properties window?
Via the context menu of the waypoint or via the context menu in the waypoint table.
Which statement about replay mode is correct?
All – must access through integrator, R letter will be displayed, must be used only when ship is not
underway
If I load a route with incomplete and/or outdated ENC coverage, how is this indicated in the
Navigation Route Menu?
The properties button will be highlighted yellow.
What is the purpose of ENC standard category?
It displays the ENC content which is the minimum required for planning and navigation.
The NAVTEX messages are accessible via
Chart loader
What is important to know about Isolated dangers mark?
All the answers are correct.
What might be significant ARPA targets for using Echo referencing mode?
Lighthouses, beacons and offshore platforms
Which statement about triggered alarms is correct?
Objects detected will no longer be highlighted after acknowledgement
Which sensors are used for DR calculation?
Gyro compass and Speed log
What is the purpose of symbol filter?
The symbol filter displays only the most important symbol if more than one symbol is available for the
same object.
What is recommended when using chart handling operations?
Always use the same workstation for chart handling operations.
Where do you have access to cross-check weather there are expired cells in your chart inventory?
In the inventory section of Chart loader.
In sailing mode
All answers are correct
Which NAVTEX messages will automatically set the attribute to AREA?
All messages with at least two positions.
Where can you save Profiles?
Under own ship in the Nav menu
Where can I select the Info labels?
In the setting section under info Labels.
Which setting about safety contour is/are true?
All – will be detected by look-ahead sector, if setting does not match any charted ECDIS contour, system
will select the next highest contour, it is boarder line between non-navigable and navigable waters.
Where you can check Presentation library?
In the settings.
Which NAVTEX messages will be automatically set to DANGER?
Messages with at least one position.
Magnetic variation
Is only visible in the Pick report if activated in the Chart settings
Where you can edit the Antigrounding value for your planned voyage in Planning mode?
In the Check menu, located in the toolbar
How do you shut down the ECDIS?
By activating EXIT navigation mode via the Settings section, then pressing System shutdown
What is potentially safety critical issue with the ability of date dependent objects to be shown or not
shown?
You can mistakenly miss objects that are meant to be shown during route creation, checking and
monitoring
Regarding major chart alert options available in presentation library 4.0 which of the following
statements are correct?
The operator decides which chart alerts are considered to be Alarms and Warnings
What are the implications of the SCAMIN filter when applied?
It has potential to hide some potentially dangerous layers.
Which menu would you find the LOP function?
Own ship-Contest menu
Where do you go to change the Safety contour?
Nav-antigrounding
