Conforms to Regulation (EC) No.
1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
SAFETY DATA SHEET
Stopaq Basecoat
SECTION 1: Identification of the substance/mixture and of the company/
undertaking
1.1 Product identifier
Product name : Stopaq Basecoat
UFI : T660-1050-J00W-A4P0
Product code : Not available.
Product description : Coating.
Other means of : Not available.
identification
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Not applicable.
Uses advised against
Not applicable.
1.3 Details of the supplier of the safety data sheet
Seal For Life Industries - Stopaq B.V., Gasselterstraat 20, 9503JB Stadskanaal, the Netherlands, Tel.: +31 599 696 170
e-mail address of person : info@[Link]
responsible for this SDS
1.4 Emergency telephone number
National advisory body/Poison Centre
Telephone number : Not available.
Supplier
Telephone number : +31 599 696 170 (NL: 08:00 - 17:00)
For emergencies only, call CHEMTREC (24 hours): In USA / Canada 1-800-424-9300; Outside USA +1 703-741-5970
CHEMTREC Europe: +(44) 20 3885 0382
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Not classified.
The product is not classified as hazardous according to Regulation (EC) 1272/2008 as amended.
See Section 11 for more detailed information on health effects and symptoms.
2.2 Label elements
Signal word : No signal word.
Hazard statements : No known significant effects or critical hazards.
Precautionary statements
Prevention : Not applicable.
Response : Not applicable.
Storage : Not applicable.
Disposal : Not applicable.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 1/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 2: Hazards identification
Supplemental label : Not applicable.
elements
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.
2.3 Other hazards
Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a
for PBT or vPvB according vPvB.
to Regulation (EC) No.
1907/2006, Annex XIII
Other hazards which do : None known.
not result in classification
SECTION 3: Composition/information on ingredients
3.2 Mixtures : Mixture
There are no ingredients present which, within the current knowledge of the supplier and in the concentrations
applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of equivalent
concern, or have been assigned a workplace exposure limit and hence require reporting in this section.
SECTION 4: First aid measures
4.1 Description of first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical attention if symptoms occur.
Skin contact : Wash contaminated skin with soap and water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur.
Ingestion : Wash out mouth with water. If material has been swallowed and the exposed person
is conscious, give small quantities of water to drink. Do not induce vomiting unless
directed to do so by medical personnel. Get medical attention if symptoms occur.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.
4.2 Most important symptoms and effects, both acute and delayed
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 2/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media
5.2 Special hazards arising from the substance or mixture
Hazards from the : No specific fire or explosion hazard.
substance or mixture
Hazardous combustion : Decomposition products may include the following materials:
products carbon dioxide
carbon monoxide
metal oxide/oxides
5.3 Advice for firefighters
Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Clothing for fire-fighters (including helmets, protective boots and gloves) conforming
to European standard EN 469 will provide a basic level of protection for chemical
incidents.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Put on appropriate personal
protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
precautions and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
6.3 Methods and material for containment and cleaning up
Small spill : Move containers from spill area. Pick up solids and put in an appropriate sealable
container for later disposal. Dispose of via a licensed waste disposal contractor.
Large spill : Move containers from spill area. Pick up solids and put in an appropriate sealable
container for later disposal. Dispose of via a licensed waste disposal contractor.
6.4 Reference to other : See Section 1 for emergency contact information.
sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 3/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 7: Handling and storage
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Protective measures : See Section 8 for information on appropriate personal protective equipment.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Wash hands before breaks and after work. Remove
contaminated clothing and protective equipment before entering eating areas.
7.2 Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. Store in a dry, cool and well-ventilated area. Keep away from food, drink
and animal feeding stuffs. Do not store in unlabelled containers.
7.3 Specific end use(s)
Recommendations : Coating.
Industrial sector specific : Not available.
solutions
SECTION 8: Exposure controls/personal protection
The information in this section contains generic advice and guidance. Information is provided based on typical
anticipated uses of the product. Additional measures might be required for bulk handling or other uses that could
significantly increase worker exposure or environmental releases.
8.1 Control parameters
Occupational exposure limits
No exposure limit value known.
Biological exposure indices
No exposure indices known.
Recommended monitoring : Reference should be made to monitoring standards, such as the following:
procedures European Standard EN 689 (Workplace atmospheres - Guidance for the assessment
of exposure by inhalation to chemical agents for comparison with limit values and
measurement strategy) European Standard EN 14042 (Workplace atmospheres -
Guide for the application and use of procedures for the assessment of exposure to
chemical and biological agents) European Standard EN 482 (Workplace
atmospheres - General requirements for the performance of procedures for the
measurement of chemical agents) Reference to national guidance documents for
methods for the determination of hazardous substances will also be required.
DNELs/DMELs
No DNELs/DMELs available.
PNECs
No PNECs available
8.2 Exposure controls
Appropriate engineering : No measures required.
controls
Individual protection measures
Hygiene measures : Wash hands before breaks and after work. Appropriate techniques should be used
to remove potentially contaminated clothing. Wash contaminated clothing before
reusing.
Eye/face protection : No special protection is required.
Skin protection
Hand protection : No special protection is required.
Body protection : No special protection is required.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 4/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 8: Exposure controls/personal protection
Other skin protection : No special protection is required.
Respiratory protection : No special protection is required.
Environmental exposure : No measures required.
controls
SECTION 9: Physical and chemical properties
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
9.1 Information on basic physical and chemical properties
Appearance
Physical state : Liquid.
Colour : Green. [Light]
Odour : Odourless.
Odour threshold : Not available.
Melting point/freezing point : Not applicable.
Initial boiling point and boiling : Decomposes
range
Flammability : Not available.
Lower and upper explosion : Not available.
limit
Flash point : Closed cup: Not applicable.
Auto-ignition temperature : Not applicable.
Decomposition temperature : >300°C
pH : Not applicable.
Viscosity : Not available.
Solubility(ies) :
Media Result
cold water Not soluble
hot water Not soluble
Solubility in water : Not applicable.
Partition coefficient: n-octanol/ : Not applicable.
water
Vapour pressure : Not applicable.
Relative density : Not available.
Density : 1.5 g/cm³ [23°C (73.4°F)]
Vapour density : Not available.
Particle characteristics
Median particle size : Not applicable.
9.2.1 Information with regard to physical hazard classes
Explosive properties : Not available.
Oxidising properties : Not available.
9.2.2 Other safety characteristics
Miscible with water : No.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 5/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 10: Stability and reactivity
10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
10.2 Chemical stability : The product is stable.
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : No specific data.
10.5 Incompatible materials : No specific data.
10.6 Hazardous : Under normal conditions of storage and use, hazardous decomposition products
decomposition products should not be produced.
SECTION 11: Toxicological information
11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008
Acute toxicity
Conclusion/Summary : Not available.
Acute toxicity estimates
N/A
Irritation/Corrosion
Conclusion/Summary : Not available.
Sensitisation
Conclusion/Summary : Not available.
Mutagenicity
Conclusion/Summary : Not available.
Carcinogenicity
Conclusion/Summary : Not available.
Reproductive toxicity
Conclusion/Summary : Not available.
Teratogenicity
Conclusion/Summary : Not available.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on likely routes : Not available.
of exposure
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 6/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 11: Toxicological information
Eye contact : No specific data.
Inhalation : No specific data.
Skin contact : No specific data.
Ingestion : No specific data.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
Conclusion/Summary : Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.
11.2 Information on other hazards
11.2.1 Endocrine disrupting properties
Not available.
11.2.2 Other information
Not available.
SECTION 12: Ecological information
12.1 Toxicity
Conclusion/Summary : Not available.
12.2 Persistence and degradability
Conclusion/Summary : Not available.
12.3 Bioaccumulative potential
Not available.
12.4 Mobility in soil
Soil/water partition : Not available.
coefficient (KOC )
Mobility : Not available.
12.5 Results of PBT and vPvB assessment
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
12.6 Endocrine disrupting properties
Not available.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 7/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 12: Ecological information
12.7 Other adverse effects
No known significant effects or critical hazards.
SECTION 13: Disposal considerations
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction.
Hazardous waste : Within the present knowledge of the supplier, this product is not regarded as
hazardous waste, as defined by EU Directive 2008/98/EC.
European waste catalogue (EWC)
Waste code Waste designation
08 04 10 waste adhesives and sealants other than those mentioned in 08 04 09
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Type of packaging European waste catalogue (EWC)
Box 15 01 01 paper and cardboard packaging
Plastic film 15 01 02 plastic packaging
Special precautions : This material and its container must be disposed of in a safe way. Empty containers
or liners may retain some product residues. Avoid dispersal of spilt material and
runoff and contact with soil, waterways, drains and sewers.
SECTION 14: Transport information
ADR/RID ADN IMDG IATA
14.1 UN number or Not regulated. Not regulated. Not regulated. Not regulated.
ID number
14.2 UN proper - - - -
shipping name
14.3 Transport - - - -
hazard class(es)
14.4 Packing group - - - -
14.5 No. No. No. No.
Environmental
hazards
14.6 Special precautions for : No special measures are required.
user
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 8/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 14: Transport information
14.7 Maritime transport in : Not available.
bulk according to IMO
instruments
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances,
mixtures and articles
No listed substance
Other EU regulations
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Air
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Water
Explosive precursors : Not applicable.
Ozone depleting substances (1005/2009/EU)
Not listed.
Prior Informed Consent (PIC) (649/2012/EU)
Not listed.
Persistent Organic Pollutants
Not listed.
Seveso Directive
This product is not controlled under the Seveso Directive.
National regulations
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Inventory list
Australia : All components are listed or exempted.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 9/10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
Stopaq Basecoat
SECTION 15: Regulatory information
Canada : At least one component is not listed in DSL but all such components are listed in
NDSL.
China : All components are listed or exempted.
Eurasian Economic Union : Russian Federation inventory: All components are listed or exempted.
Japan : Japan inventory (CSCL): Not determined.
Japan inventory (ISHL): Not determined.
New Zealand : All components are listed or exempted.
Philippines : All components are listed or exempted.
Republic of Korea : All components are listed or exempted.
Taiwan : All components are listed or exempted.
Thailand : Not determined.
Turkey : Not determined.
United States : All components are listed or exempted.
Viet Nam : All components are listed or exempted.
15.2 Chemical safety : This product contains substances for which Chemical Safety Assessments are still
assessment required.
SECTION 16: Other information
Indicates information that has changed from previously issued version.
Abbreviations and acronyms : ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
1272/2008]
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
N/A = Not available
PBT = Persistent, Bioaccumulative and Toxic
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
SGG = Segregation Group
vPvB = Very Persistent and Very Bioaccumulative
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Not classified.
Full text of abbreviated H statements
Not applicable.
Full text of classifications [CLP/GHS]
Not applicable.
Date of printing : 9/3/2024
Date of issue/ Date of : 9/3/2024
revision
Date of previous issue : 4/2/2019
Version : 4
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Date of issue/Date of revision : 9/3/2024 Date of previous issue : 4/2/2019 Version :4 10/10
