MODEL: EJC 210

TECHNICAL SPECIFICATION

SUPERIOR POWER, PERFORMANCE AND PRODUCTIVITY

CAPACITY: 21000 LBS (9525 KG)

Revision Date: 4/10/00 ST

E R ED C OM Tamrock Loaders Inc.
Sandvik-Tamrock reserves the right to change this 4445 Fairview Street, Burlington
PA
I
R EG

NY

specification without notice Ontario, Canada L7L 2A4

Tel.: (905) 632-4940
Fax: (905) 639-0876
 46 EJC 210

Main Dimensions

Note: All vertical dimensions are for an empty unit.

Dimensions are in inches, dimensions in brakets are in
millimeters.
Optional ROPS/FOPS canopy shown.

Revision Date: 4/10/00 ST

E R ED C OM Tamrock Loaders Inc.
Sandvik-Tamrock reserves the right to change this 4445 Fairview Street, Burlington
PA
I
R EG

NY

specification without notice Ontario, Canada L7L 2A4

Tel.: (905) 632-4940
Fax: (905) 639-0876
 EJC 210 47

Specification Sheet
SANDVIK TAMROCK CUSTOMER:
EJC Loaders Division P.O. NBR.
EJC 210 SHIP DATE

4/21/99
STANDARD UNIT

Detroit Diesel Series 50 DDEC engine rated at 250 hp (186kw)

Donaldson dry type air intake
ECS catalytic exhaust purifier with silencers
Clark modulated shift transmission
Clark torque converter
Clark axles with "Posi-Stop" brakes
18:00 x 25 - 28 PLY L5S tires
6.0 yd3 (4.6 m3) bucket with 500 BHN lip
Pilot operated, lever type steering control
Pilot operated, single lever joystick bucket control
Electric transmission controls
Electric gauges
24-volt DC electrical system
Central manual lube
SAE type hose fittings
Four (4) English parts manuals
4 operator and 4 service manuals

BASE UNIT PRICE

A1 = no impact on delivery time; A2 = delivery time on request

OPTIONAL EQUIPMENT

A2 * Deutz F10L-413FW diesel engine, 231 hp (172 kW)

A2 * Deutz F10L-413FW for ________ft/metres,________Temperature
A2 * Deutz BF6M1013 ECP diesel engine, 250 hp (186 kW)
A2 * Caterpillar 3306 PCTA, 250 hp (186 kW)
A2 * Caterpillar 3306 DITA, 250 hp (186 kW)
A2 * Automatic lubrication system (Lincoln Modular)
A2 * Ejector bucket 5.5 yd3(4.2 m3), 107"(2718mm) wide
A2 * Fully enclosed operators compartment with air conditioning

A1 SAE, ROPS/FOPS canopy

A1 Fire suppression system, Ansul 8 nozzle
A1 Auto. fire suppression system, Ansul 8 nozzle (Checkfire II)
A1 Hand held fire extinguisher 20 lb.
A1 Radio remote control (with receiver cover/cable and interface), Tamrock proportional
A1 Radio remote control interface c/w electric shift
A1 Radio remote control fire suppression (requires fire suppression system and RRC)
A1 Back-up alarm, audible
A1 Emergency steering system (SAE J-1511), accumulator
A1 Hydraulic gauge panel option
A1 Hydraulic tow hook/brake release
A1 Spare rim & tire, standard
A1 Spare rim
A1 Additional spare parts manuals
A1 Additional workshop manuals

(*) Replaces the standard equipment

Revision Date: 4/10/00 ST

E R ED C OM Tamrock Loaders Inc.
Sandvik-Tamrock reserves the right to change this 4445 Fairview Street, Burlington
PA
I
R EG

NY

specification without notice Ontario, Canada L7L 2A4

Tel.: (905) 632-4940
Fax: (905) 639-0876
 48 EJC 210

Standard Unit
Main dimensions Standard tires
Total length 9 957 mm (392") Tire size 18.00 x 25, 28 PLY L5S
Width without bucket 2 565 mm (101") Type Bridgestone
Maximum width 2 718 mm (107") Air pressure, front 551 kPa (5.51 bar) (80 psi)
Height with safety canopy 2 311 mm (91") Air pressure, rear 551 kPa (5.51 bar) (80 psi)
Weights Steering hydraulics
Operating weight 25 084 kg (55 300 lb.) Full hydraulic power steering, centre articulated with a
Total loaded weight 34 609 kg (76 300 lb.) double acting steer cylinder, closed centre system with ac-
Axle weights without load cumulator reserve and a pressure compensated piston
front axle 10 070 kg (22 200 lb.) pump. Equipped with pilot operated control lever.
rear axle 15 014 kg (33 100 lb.) Turning radius (with std bucket):
Right inner 3 302 mm (130 ")
Axle weights with load outer 6 553 mm (258 ")
front axle 24 358 kg (53 700 lb.) Turning angle 42.0 °
rear axle 10 251 kg (22 600 lb.) Main components in steering system:
Capacities Hydraulic pump Pressure compensated piston type
Tramming capacity 9 525 kg (21 000 lb.) Control valve Pilot operated
Breakout force, lift 97 kN (9 910 kg) (21 850 lbf) Steering cylinders EJC 6.0" bore x 2.5" rod
Breakout force, tilt 143.5 kN (14 628 kg) (32 250 lb.) Pressure settings:
Tipping load 25 174 kg (55 500 lb.) Main relief 13.8 MPa(138 bar) (2 000 psi)
Buckets 3.8 - 5.3 m³ (5.0 - 7.0 yd³) Port relief valves 15.2 MPa(152 bar) (2 200 psi)
Bucket motion times Bucket hydraulics
Raising time 5.5 sec. Full hydraulic open-centre system with one gear pump.
Lowering time 4.0 sec. Equipped with pilot operated joystick control lever, two lift
Tipping time 5.0 sec cylinders and one dump cylinder.
Driving speeds forward and reverse Main components:
1st gear 4.7 km/h (2.9 m.p.h.) Lift cylinders EJC 6.0" bore x 3.0" rod
2nd gear 8.0 km/h (5.0 m.p.h.) Dump Cylinder EJC 8.0" bore x 4.0" rod
3rd gear 13.5 km/h (8.4 m.p.h.) Hydraulic pump Gear pump
4th gear 23.3 km/h (14.5 m.p.h.) Control valve Pilot operated
Frame Pressure Settings:
Rear and front frame Welded steel box construction Main relief 13.8 MPa (138 bar) (2000 psi)
Material G40.21 - 50WT Cat. #3 Bucket dump 5.5 MPa (55 bar) (800psi)
Central hinge Full plate, clevis type with Bucket roll back 15.2 MPa (152 bar) (2200 psi)
spherical bearings Lift arms raise 18.6 MPa (186 bar) (2700 psi)
Material G40.21 - 50WT Cat. #3 Lift arms lower 15.2 MPa (152 bar) (2200 psi)
Tanks are welded to frame. Pilot control 2.1 MPa (21 bar) (300 psi)
Hydraulic oil tank capacity Appro. 303 l (80 gal)
Standard engine
Diesel engine Detroit Diesel Series 50 DDEC Standard brakes
Output 186 kW (250 Hp) @ 2 100 rpm Service brakes are spring applied / hydraulically released,
Torque 1058 Nm (780 lbf-ft) @ 1 350 rpm liquid cooled multi-disc brakes on all wheels, with two sep-
Number of cylinders In line, 4 arate circuits for the front and rear axles. Service brakes
Displacement 8.5 L (519 in³) also function as an emergency brake, when the emergen-
Cooling system Liquid cooled cy brake button is engaged.
Combustion principle Turbo charged, after cooled, Main components in the brake system:
direct injected, 4 cycle Pressure accumulator Piston type with charging valve
Air filtration Donaldson, dry type Brake pedal valve Modulated
Electric system 24 V
Exhaust system ECS catalytic purifier with Electrical equipment
silencer Alternator 24 V 60 A, Delco-Remy
Batteries 2 x 12 V, 700 CCA
Standard converter Starter 9 kW (12 hp), 24 V, Bosch
Clark C 5502, single stage Stall torque ratio: 3.14:1 Driving and working lights 4 front, 4 rear
Offset Ratio: 1.0:1
Standard manuals (customer)
Transmission 3 Spare parts manuals English
Clark 4421 4-speed forward and reverse 3 Operators manual English
with modulation 3 Service manual English
Standard axles Standard manuals (market area)
Front axle Clark 19D2748, posi-torq 1 Spare parts manual English
differential, fixed 1 Operators manual English
Rear axle Clark 19D2748 no-spin 1 Service manual English
differential, oscillating ± 10°.

Revision Date: 4/10/00 ST

E R ED C OM Tamrock Loaders Inc.
Sandvik-Tamrock reserves the right to change this 4445 Fairview Street, Burlington
PA
I
R EG

NY

specification without notice Ontario, Canada L7L 2A4

Tel.: (905) 632-4940
Fax: (905) 639-0876
 EJC 210

EJC 210 (IMPERIAL UNITS)

Revision Date: 4/10/00

60.00 ENGINE: DET. DIESEL DDEC 50 AXLES: 19D2748

specification without notice

CONVERTER: Clark 4421 TIRES: 18:00R25
55.00 TRANSMISSION: Clark C5402 Payload: 21000 lbs

50.00

Rolling resistance (% )
45.00

Sandvik-Tamrock reserves the right to change this

Empty Loaded
0 2 4 6 8 0 2 4 6 8
40.00

R EG
I
35.00

ST
E R ED C OM
PA
NY
30.00
40
Grade (%)

Tractive Effort (Klbf)

25.00
30
Speeds on Grade

40
20.00

30 20
15.00

15
20
10.00
10

5.00 15

10

0.00
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
Speed (mph)
49

Tamrock Loaders Inc.

Ontario, Canada L7L 2A4

Fax: (905) 639-0876

Tel.: (905) 632-4940
4445 Fairview Street, Burlington
 50

Revision Date: 4/10/00

280
EJC 210 (METRIC UNITS)
AXLES: 19D2748

specification without notice

ENGINE: DET. DIESEL DDEC 50
TIRES: 18:00R25
CONVERTER: Clark 4421
260
TRANSMISSION: Clark C5402 Pa ylo ad : 10 886 kg
Rolling resistance (% )
240
Empty Loa de d
220 0 2 4 6 8 0 2 4 6 8

Sandvik-Tamrock reserves the right to change this

200

180

R EG
I 160

ST
E R ED C OM
PA
NY 140
Grade (%)

40
120

Tractive Effort (kN)

100 30
40

80
30
20
60
20 15
40
15 10
10
20

0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46
Speed (km/h)
EJC 210 - Speeds on Grade

Tamrock Loaders Inc.

Ontario, Canada L7L 2A4

Fax: (905) 639-0876

Tel.: (905) 632-4940
4445 Fairview Street, Burlington