MDL bushings_1 6/16/11 2:05 PM Page 1
GRAPHITE
IMPREGNATED
BUSHINGS
Impregnated Bushings
Graphite
NOTE: MDL Self Lubricating Bushings, (Graphite Impregnated Bronze Alloy Bushings),
are interchangeable with self lubricating bushings from Danly IEM* and are designed to
be used with Plain Bearing Guide Pins from either MDL or Danly IEM*.
*Danly IEM is a registered trademark of Danly IEM L.L.C.
MDL Mold & Die Components, Inc. is not connected, in any way, to Danly IEM, or Danly IEM L.L.C.
MDL bushings_1 6/16/11 2:05 PM Page 2
Inch Guide Pin Bushings
Material: Aluminum Bronze Alloy
Supplied with (3) toe clamps and screws.
O.D. Finished to nominal +.0000/-.0005
Catalog Nominal Mount. Bolt
Number I.D. D A B C L L1 Screw Circle
G65.008.015 1 1.0006 1.75 1.56 1.500 1.875 1.375 1/4-20 2.125
G65.008.023 1.0010 2.875 2.375
G65.010.019 1 1/4 1.2506 2.12 1.94 1.750 2.375 1.875 5/16-18 2.625
G65.010.027 1.2510 3.375 2.875
G65.012.019 1 1/2 1.5006 2.38 2.18 2.000 2.375 1.875 5/16-18 2.875
G65.012.027 1.5010 3.375 2.875
G65.014.023 1 3/4 1.7507 2.62 2.44 2.250 2.875 2.375 5/16-18 3.156
G65.014.031 1.7512 3.875 3.375
G65.016.023 2 2.0007 2.94 2.75 2.500 2.875 2.375 5/16-18 3.469
G65.016.031 2.0012 3.875 3.375
G65.020.024 2.5012 3.000 2.625 06/11 Pentzer
G65.020.032 2 1/2 2.5018 3.38 3.18 3.000 4.000 3.625 5/16-18 3.906
G65.020.040 5.000 4.625
G65.024.024 3.0014 3.000 2.625
G65.024.032 3 3.0023 3.88 3.68 3.500 4.000 3.625 5/16-18 4.406
G65.024.040 5.000 4.625
G65.024.048 6.000 5.625
c MDL Mold & Die Components, Inc. • 4572 N. Long Road, Columbus, IN 47203
(800) 574-0059 or (812) 373-0021 • fax: (812) 373-0042 • [Link]
