DSR-G Series Roots Blower

Product Introduce

DICHENG DSR-G Series Roots Blowers adopts the advanced technology of Japan, its air
capacity is 0.45m3/min - 172.4m3/min, the pressure is from 63.7Kpa to 98Kpa. The main
characteristic of our air blower is small volume, light weight, flow strong, noise small, steadily
reliable operation. This air blower is mainly applied to such trades as water treatment, air
transport, mine, vacuum packaging, aquaculture and etc. Our products export to Southeast Asia,
Europe, North and South America and etc.

Product Feature

1. Air flow and pressure can be customized

2. Stable air flow and less pressure variation
3. Clean air not with oil moist
4. Construction simple and easy maintenance
5. Bearing are all lubricated by oil moist
6. Long service life
Blower Selection

DSR-G High Pressure Tri-lobe Roots Blower

DSR50G 0.45-2.31m3/min 63.7-98Kpa
DSR65G 0.78-3.09m3/min 63.7-98Kpa
DSR80G 1.82-5.26m3/min 63.7-98Kpa
DSR100G 2.65-8.65m3/min 63.7-98Kpa
DSR125G 4.64-12.23m3/min 63.7-98Kpa
DSR150G 9.53-28.35m3/min 63.7-98Kpa
DSR200DG 19.60-44.49m3/min 63.7-98Kpa
DSR200G 25.34-56.92m3/min 63.7-98Kpa
DSR250G 58.0-93.7m3/min 63.7-98Kpa
DSR300G 83.8-134.1m3/min 63.7-98Kpa
DSR300AG 66.18-144.1m3/min 63.7-98Kpa
DSR350G 97.9-172.4m3/min 63.7-98Kpa
Blower Structure Diagram

No. Name Material Q’ ty No. Name Material Q’ ty

1 Shell HT200 1 14 Z sealing ring Nitrile rubber 1
2 Impeller HT200 2 15 Gear 35CrM 2
3 Drive shaft 45Cr 1 16 Gear lock washer Q235 2
4 Driven shaft 45Cr 1 17 Gear lock nut SS400 2
5 Drive side siding HT200 1 18 Gearbox HT200 1
6 Gear side siding HT200 1 19 Sleeve 45 1
7 Drive bearing NSK 2 20 End cover Q235 2
8 Driven bearing NSK 2 21 Pin 45 1
9 Sealing ring Nitrile rubber 2 22 Plug 35 1
10 Sealing ring Nitrile rubber 2 23 Oil gauge 1
11 Bearing sleeve 45 4 24 Vent 1
12 Bearing cover HT200 1 25 Grease nipple C3605 2
13 Bearing cover HT200 1 26 Gearbox seals Barley paper 2
Outline drawings and foundation installation
DSR Roots blower ( Belt drive)
DSR Roots blower ( Coupling drive)
Pipe installation reference drawing
 Blower Accessorie
Inlet silencer
Weight
Model Dn D1 D L N-Φh
(Kg)
XF-40 Φ40 85 110 220 4-Φ14 4
XF-50 Φ50 85 150 500 4-Φ14 5
XF-65 Φ65 110 155 550 4-Φ14 7
XF-80 Φ80 130 180 800 4-Φ14 15
XF-100 Φ100 145 207 850 8-Φ18 19
XF-125 Φ125 165 260 915 8-Φ18 22
XF-150 Φ150 200 260 1100 8-Φ18 35
XF-200 Φ200 280 320 1450 8-Φ20 60
XF-250 Φ250 350 395 1650 12-Φ20 120
XF-300 Φ300 400 445 1750 12-Φ22 140

Outlet silencer
Weight
Model ΦE A B C D N-Φh
(Kg)
KM-40 Φ40 500 135 110 150 4-Φ19 9
KM-50 Φ50 600 140 125 165 4-Φ19 12
KM-65 Φ65 700 165 145 185 4-Φ19 16
KM-80 Φ80 900 190 160 200 8-Φ19 20
KM-100 Φ100 1200 217 180 220 8-Φ19 38
KM-125 Φ125 1400 261 210 250 8-Φ22 45
KM-150 Φ150 1600 286 240 285 8-Φ22 68
KM-200 Φ200 1800 320 295 310 8-Φ22 85
KM-250 Φ250 2000 450 350 395 12-Φ22 130
KM-300 Φ300 2000 500 400 445 12-Φ22 160

Vertical outlet silencer

Weight
Model ΦF A B C D E F G N-Φh
(Kg)
RKM-40 Φ40 350 90 125 145 125 110 150 4-Φ18 10
RKM-50 Φ50 450 130 140 165 140 125 165 4-Φ19 15
RKM-65 Φ65 500 140 170 190 170 145 185 4-Φ19 20
RKM-80 Φ80 610 150 190 217 190 160 200 8-Φ19 27
RKM-100 Φ100 680 160 220 261 220 180 220 8-Φ19 34
RKM-125 Φ125 820 200 240 286 240 210 250 8-Φ22 58
RKM-150 Φ150 940 220 290 370 290 240 285 8-Φ22 80
RKM-200 Φ200 1060 260 320 420 320 295 340 8-Φ22 97
RKM-250 Φ250 1250 400 350 500 500 350 395 12-Φ22 140
RKM-300 Φ300 1300 430 560 560 560 400 445 12-Φ22 180
Flexible joint
Weight
Model Φ D1 D2 L T N-Φh
(Kg)
KXT-40 Φ40 110 150 90 16 4-Φ18 2
KXT-50 Φ50 125 165 105 18 4-Φ19 3
KXT-65 Φ65 145 185 115 20 4-Φ19 3.5
KXT-80 Φ80 160 200 135 20 8-Φ19 4
KXT-100 Φ100 180 220 150 22 8-Φ19 5
KXT-125 Φ125 210 250 165 24 8-Φ19 6.5
KXT-150 Φ150 240 285 180 24 8-Φ22 9.5
KXT-200 Φ200 295 340 190 24 8-Φ22 16
KXT-250 Φ250 350 395 230 24 12-Φ22 25
KXT-300 Φ300 400 445 245 24 12-Φ22 38

Check valve
Weight
Model Φ A B C J
(Kg)
DCV-40 Φ40 20 16 90 40 1.0
DCV-50 Φ50 25 19 105 50 1.2
DCV-65 Φ65 36 19 125 65 1.5
DCV-80 Φ80 46 19 135 80 1.8
DCV-100 Φ100 67 19 160 100 2.5
DCV-125 Φ125 88 21 190 125 3.6
DCV-150 Φ150 108 24 220 150 5.2
DCV-200 Φ200 138 29 270 200 11.0
DCV-250 Φ250 200 30 330 250 15.0
DCV-300 Φ300 240 40 380 300 22.0

Silencer Shell Siding OPT belt Shaft

Impeller NSK bearing Check valve Flexible joint Package

Noise test results

Note:
1: The noise test result is tested at a distance of 1 meter from the blower.
2: The noise level is affected by the length of the line, the number of turns and the
surrounding environment.
Common malfunctions and Solution

Malfunctions Reason Solution

Repair or replace the
Can rotated by hand The motor is damaged
Can not motor
rotate Can rotated round by The lobes are locked Open to repair
hand The impurity in blower Open to clean
Skid, v-belt is too tight or too
Adjust v-belt tension
loose
Pulley offset Reset pulley
Pulley and belt cover friction Adjust belt cover
Bearing oil lack or aging To replace the oil
Gear oil lack or aging To replace the oil
The safe valve leakage Adjust the safe valve
Abnormal sound or To strengthen the
Foundation insufficient strength
vibration foundation strength
Eliminate by the silencer
Piping resonance
and support
Exhaust pressure rises abruptly See ※annotated
Anchor bolt is too loose Tighten
Rotor interference Open to repair
The impurity in blower Open to clean
Blower Check valve bad Replace
Exhaust pressure rises abruptly See ※annotated
Can
Temperature of working Ventilated working
rotate Overheating
environment exceeds 40 ℃ environment
Inlet silencer obstruction Cleaning/replace filter
Tighten the pipe
Pipeline leaks
connection
Inlet silencer obstruction Cleaning/replace filter
Airflow insufficient
The safe valve leakage Adjust the safe valve
V-belt is too loose Adjust v-belt tension
Exhaust pressure rises abruptly See ※annotated
Shut off the valve Fully open the valve
The water level rises Adjust water level
Inlet/outlet pipe jams Cleaning debris
Exhaust pressure
Valve bad or twist reversed Replace or reverse
rises abruptly
direction direction twist
Reduce round speed or
Airflow overpowered
exhaust
Refuel to the center of oil
Oil leak Lubrication oil overmuch
standard
 FAQ
1. What’s the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period,
replace the damaged parts for free of charge. Out warranty period, to provide timely,
high-quality technical services and price concessions spare parts to ensure continuous safe
and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60,000 hours.
C- Service life of bearing is more than 30,000 hours.
D- Service life of gear is more than 60,000 hours.

Contact Us
Shandong Dacheng Machinery Technology Co., LTD
Address: Zhangqiu Mingshui, Jinan City, Shandong province, China 250200.
Website: [Link]
Tel: +86 0531-83216898
Fax: +86 0531-83216898
Cellphone: +86 013188890202
WhatsApp: +86 013188890202
Skype: live:zqdicheng
Email: zqdicheng@[Link]