Beam Design:Project Settings Page 1 of 2
PROJECT SETTINGS
Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/7/2024 6:11:52 PM
General and Reinforcement Settings
Material Properties
Concrete Grade : C21 N/sqmm
Steel Grade (Main) : Fy227 N/sqmm
Steel Grade (Shear) : Fy227 N/sqmm
Top / Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Max Aggregate 2 Size : 25 mm
Analysis Materials used : No
Design Settings
Ignore Torsion : No
Flange Beam Considered : None
Rebar Selected
Rebar Used : 10,12,16,20,25,32,40
Main Rebar
Minimum : 16
Maximum : 25
Shear diameter
Minimum : 10
Maximum : 12
SFR Rebar
Minimum : 10
Maximum : 16
Stirrup Spacing
Minimum : 75 mm
Maximum : 150 mm
Spacing RoundOff : 5 mm
Percentage Reinforcement
Minimum : 0.13 %
Maximum : 4 %
Nominal Reinforcement : 0.13 %
file:///C:/Users/user/AppData/Local/Temp/tmp9A04.tmp 2/8/2024
Beam Design:Project Settings Page 2 of 2
Detail Settings
Top Detailing Style : Best Fit
Bottom Detailing Style : Best Fit
Crack Width Settings:
Crack Width ACI 224R-01 Check : No
Curtailment Settings
Top Reinforcement Curtailment Location
End Support : L/4
Clear Cover : 40 mm
Continuous Support : L/4
Bottom Reinforcement Curtailment Location
Mid Span : L/6
End Support : L/4
Continuous Support : L/4
Ductile Beam
Factor of Depth : Dx2
Non Ductile Beam
Factor of Length : L/3
Bending And Axial Force Design Settings : Not Consider
Beam Bar Spacing
Skip maximum spacing criteria between rebar for zero
bending moment : No
Beam Rebar Rebar
Spacing Spacing
Width Nos<=16 Nos>=20
300 4 52 3 80
file:///C:/Users/user/AppData/Local/Temp/tmp9A04.tmp 2/8/2024
