CERTIFICATE OF COMPLIANCE
Certificate Number E506155
Report Reference E506155-20220428
Date 2022-April-29
Issued to: S:FLEX GmbH
Reinbeker Weg 9
Hamburg 21029 DE
This is to certify that MOUNTING SYSTEMS, MOUNTING DEVICES,
representative samples of CLAMPING DEVICES AND GROUND LUGS FOR USE
WITH PHOTOVOLTAIC MODULES AND PANELS -
COMPONENT
See Addendum Page for Product Designation(s).
Have been investigated by UL in accordance with the
component requirements in the Standard(s) indicated on
this Certificate. UL Recognized components are incomplete
in certain constructional features or restricted in
performance capabilities and are intended for installation in
complete equipment submitted for investigation to UL LLC.
Standard(s) for Safety: UL 2703, Mounting Systems, Mounting Devices,
Clamping/Retention Devices, and Ground Lugs for Use with
Flat-Plate Photovoltaic Modules and Panels
Additional Information: See the UL Online Certifications Directory at
[Link] for additional information
This Certificate of Compliance does not provide authorization to apply the UL Recognized Component Mark.
Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified
and covered under UL’s Follow-Up Services.
Look for the UL Recognized Component Mark on the product.
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at [Link]
CERTIFICATE OF COMPLIANCE
Certificate Number E506155
Report Reference E506155-20220428
Date 2022-April-29
This is to certify that representative samples of the product as specified on this certificate were tested according
to the current UL requirements
Models:
End clamp Hawk HK25-45 l=40 E, Part. No. 710-300-132,
Mid clamp Hawk HK25-45 l=40 E, Part. No. 710-300-112.
Accessories:
Rail Hawk ST-HK 9/50 l=3150, Part No. 710-100-101,
Rail Hawk ST-HK 9/50 l=3300, Part No. 710-100-102,
Rail Hawk ST-HK 9/50 l=6200, Part No. 710-100-105,
Rail Hawk ST-HK 5/40 l=3150, Part No. 710-100-201,
Rail Hawk ST-HK 5/40 l=3300, Part No. 710-100-202,
Rail Hawk ST-HK 5/40 l=6200, Part No. 710-100-205,
Base rail Delta Concrete l=4600, Part No. 710-500-001,
Base rail Delta Concrete l=4400, Part No. 710-500-003,
Base rail Delta Concrete l=4730, Part No. 710-500-004,
Trap. sheet metal rail HK compl. l=375 26, Part No. 710-400-101,
HS rail HK 125 complete, Part No. 710-400-105,
HS rail HK 125 XL 50 complete Part, No. 710-400-110,
HS rail HK 125 XL 100 complete Part, No. 710-400-108,
Clamp for standing seam 2.1 complete, Part No. 720-200-502,
Clamp for standing seam CL complete, Part No. 720-200-520,
Clamp for standing seam DCO complete, Part No. 720-200-530,
Lift Adapter Multi front part, Part No. 720-200-610,
Lift Adapter Multi back part, Part No. 720-200-611,
Lift Trap sheet metal Rail 375, Part No. 720-200-612,
Dynobond 8” Bonding kit, Part No. 720-800-040.
Recognized for Bonding to the following PV Modules:
PV Manufacturer Models UL Standard Certified by
CSA,
CSI Solar Co., Ltd. CS3K-xxxP (xxx = 290 to 340 W) UL 61730-1 / -2
80016357
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at [Link]
