EGD Mid Sem-1
30/01/2021
* Required
EGD Mid Sem-1 30/01/2021
If the value of eccentricity is not equal 1 point
to 1 the curve will be *
Ellipse or Circle
Parabola or Ellipse
Hyperbola or Parabola
Ellipse or Hyperbola
If a point is situated behind the V.P., It 1 point
is top view will be *
above xy line
below xy line
on the xy line
none of the above
Which are the two systems of placing 1 point
dimensions? i. Aligned system, ii.
Break system, iii. Unidirectional
system, iv. Directional system *
i, ii
i, iii
ii, iv
i, iv
If a point is kept on the H.P., It is front 1 point
view will be *
above xy line
below xy line
on the xy line
none of the above
If a line is parallel to H.P., It is Top view 1 point
will show *
shortened length
true length
none of the above
point view
If the value of Eccentricity is greater 1 point
than 1 curve will be *
Ellipse
Parabola
Hyperbola
Circle
Which tool can be used to draw a 90 1 point
degree angle? *
30/60 triangle
Protractor
Drafting machine
All of the above
A French curve is used to draw * 1 point
Circles
Ellipses
Smooth curves
Polygon
Which type of line is pa! of a 1 point
dimension? *
Break lines
Hidden lines
Extension lines
Cutting plane lines
If a line AB parallel to both the 1 point
horizontal plane and ve!ical plane
then the line AB is *
Parallel to proGle plane
Lies on proGle plane
Perpendicular to proGle plane
Inclined to proGle plane
When the plane cuts the cone parallel 1 point
to the generator, the curve traced out
is *
Ellipse
Parabola
Hyperbola
Circle
While representing the diameter in 1 point
dimensioning it is represented as *
Dia
A line AB is on the ve!ical plane of 1 point
projection planes, which view from
the following gives the actual length
of the line AB? *
Front view
Top view
Side view
Isometric view
Which one of the following is not a 1 point
reduction scale? *
1:1
1:200
5/320
5:6
A point is in 2nd quadrant 30 units 1 point
away from the horizontal plane and 20
units away from the ve!ical plane.
O!hographic projection is drawn.
What is the distance from point of
front view to reference line, top view
point to reference line? *
30, 20
20, 30
0, 30
20, 0
The size of the drawing drawn to scale 1 point
2:1 will be ________________ the actual
size. *
Same as
Twice of
Half of
None of the above
Representative fraction is ratio of * 1 point
Maximum length/ Minimum length
Actual length of object/ Length of object in
drawing
Length of object in drawing/ Actual length
of object
All of the above
When the diameter of the directing 1 point
circle is twice the diameter of rolling
circle the hypo cycloid obtained is a *
Straight line
Parabola
Hyperbola
Circle
Extension lines should sta! from 1 point
which pa! of the drawing? *
Away from the outlines
From inside the views
No need for extension lines
Outlines of the view
Dashed line is used to draw * 1 point
Outer Edges
Projections
Center and Center axis
Hidden faces
If the 10 m length is represented as 1 1 point
mm on the map then representative
fraction is *
1/100
1/10
1/1000
None of above
When a cone is cut by a plane 1 point
perpendicular to base passing
through the apex “the shape of
section obtained is *
Ellipse
Parabola
Hyperbola
Triangle
If a point is kept infront of the V.P., It is 1 point
top view will be *
above xy line
below xy line
on the xy line
none of the above
What is the next size of 210 mm x 297 1 point
mm in drawing papers? *
148 mm x 210 mm
297 mm x 420 mm
420 mm x 594 mm
105 mm x 148 mm
A line AB is on the horizontal plane 1 point
inclined to a ve!ical plane at 45
degrees, which view from the
following gives the actual length of
the line AB? *
Front view
Top view
Side view
Isometric view
What does dimensioning of a circle 1 point
depend upon? *
Shape
Length
Unit
Size
When the line is parallel to VP and 1 point
perpendicular to HP, we can get its
true length in *
T.V.
F.V.
S.V.
F.V. and S.V
Given Representative factor as 4/50 1 point
and maximum length is 100 cm. Find
the length of scale. *
8 cm
10 cm
9.7 cm
12 cm
Inclination of the line with H.P. is seen 1 point
in the *
F.V.
T.V.
S.V.
none of the above
Which of the following represent full 1 point
scale? *
10:1
20:1
1:1
1:10
Back Submit
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report
Abuse - Terms of Service - Privacy Policy
Forms
