STEP5 PLC Timers
STEP7 PLC Step5 Timers
English German
Timer Name Diagram
Step7 mnenonics mnenonics
S7 Adapters SD SE S_ODT On-Delay Timer
Timers
SF SA S_OFFDT Off-Delay Timer
Other
SP SI S_PULSE Pulse Timer
Step5
SE SV S_PEXT Extended Pulse Timer
Timers
Other SS SS S_ODTS Retentive On-Delay Timer
Sinumerik
FR FR Enable Timer (Free)
Cables
R R Reset Timer
L L Load Current Timer Value
into ACCU 1 as Integer
LC LC Load Current Timer Value
into ACCU 1 as BCD
Step5 Timer example for STL (AWL)
// Example STL Timer - English syntax // German syntax
A I 0.0 // Test input bit 0.0 U E 0.0
L KT 010.2 // Preset 10 seconds into ACCU 1. L KT 010.2
SD T1 // Start On-Delay Timer SE T1
A T1 // Check signal state of timer T1. U T1
= Q 4.0 // Make output bit 4.0 = A 4.0
Time Value Constants
KT <BCD>.<resolution>
• <BCD> integer (3 decimal digits)
Integer from 001 to 999.
• <Resolution> (1 decimal code number)
Resolution or Range of Time value
Code
Time Base min max
0 0.01 s (10 ms) 10 ms 9s 990ms
1 0.1 s (100 ms) 100 ms 1m 39s 900ms
2 1s 1s 16m 39 s
3 10 s 10 s 2h 46m 30s
// Step 5 Example
// Resolution = 10 ms, range = [10ms; 9s990ms]
L KT 001.0 // 10 ms
L KT 002.0 // 20 ms
L KT 500.0 // 5 s (5000 ms)
L KT 999.0 // 9 s, 990 ms
// Resolution = 100 ms, range = [100ms; 1m39s900ms]
L KT 001.1 // 100 ms
L KT 002.1 // 200 ms
L KT 010.1 // 1 s (1000 ms)
L KT 050.1 // 5 s (5000 ms)
L KT 999.1 // 1 m, 39 s, 900 ms (99900 ms)
// Resolution = 1 s, range = [1s; 16m39s]
L KT 001.2 // 1 s
L KT 002.2 // 2 s
L KT 005.2 // 5 s
L KT 060.2 // 1 m (60 s)
L KT 999.2 // 16 m, 39 s (999 s)
// Resolution = 10 s, range = [10s; 2h46m30s]
L KT 001.3 // 10 s
L KT 002.3 // 20 s
L KT 006.3 // 1 m (60 s)
L KT 030.3 // 5 m (300 s)
L KT 360.3 // 1 h (3600 s)
This site uses cookies to deliver our services and to show you relevant ads
L KT 999.3 // 2 h, 46 m, 30 s (9990 s)
and job listings. By using our site, you acknowledge that you have read and
understand
© 2005–2019 our Cookie Policy, Privacy Policy, and our Terms of Service.
[Link]
