JET-LUBE V-2 PLUS TM
MULTI-PURPOSE THREAD SEALANT
DESCRIPTION V-2 PLUS EXCEEDS THE UL LABORATORIES TEST
V-2 PLUS Multi-Purpose Thread Sealant is a soft-setting, PRESSURES FOR THE MEDIA BELOW:
non-petroleum based thread sealant for use with potable GASOLINE & PETROLEUM -1000KPa (145 psi)
water, liquids and gases where immediate pressurisation is OILS
desirable or necessary. V-2 PLUS Multi-Purpose Thread PROPANE, BUTANE -1725kPa (250 psi)
Sealant is a water resistant, nonstaining, low odour sealant NATURAL GAS & METHANE -10,342 kPa (1500 psi)
which includes Aramid fibre, PTFE and unique natural WATER -1200 kPa (175 psi)
fillers for better sealing and a tighter joint make-up due to
increased thread lubrication. V-2 PLUS will provide an How to avoid a leaky connection:
excellent seal for correctly made-up taper thread Do not use hemp or other fibres with V-2.
connections across the whole range of readily available pipe Do not mix NPT, BSP or any other standard in the same
diameters. connection. Make sure the threads are properly cut and
clean. Make sure the pipe is round and not oval. Coat the
V-2 PLUS Multi-Purpose Thread Sealant is non-toxic, sealant onto the male threads. Tighten according to the
environmentally safe, and contains no lead or metals. applicable standard. Beware of re-used fittings as they are
V-2 PLUS is easily applied and is brushable. often deformed and do not seal as effectively.
ADVANTAGES PRODUCT CHARACTERISTICS
• Soft Setting • Allows immediate Fluid Type Vegetable Oil
pressurisation** Colour Appearance Ivory/Beige Semi Fluid
• Nonpetroleum • Contains Aramid Fibre, PTFE & Dropping Point (ASTM D-2265) Not applicable
based natural fillers Specific Gravity 1.32
• Water resistant • Approved for potable water and Oil Separation Not applicable
gas installations Wr. % Loss @ 100°C (212°F)
• Lead and Metal free • Non-flammable, Non staining Flash Point (Seta Closed Cup) 113°C (235°F)
• Low odour • Brushable of -18°C (0°F) Non-volatile Content 84%
Viscosity, Brookfield (ASTM D-2196)
**Certain applications may require a dry time for optimum #7 Spindle, 5 rpm 25°C (77°F) 160,000-300,000 cps
results Brushable to:- -18°C (0°F)
Copper Strip Corrosion 1A
APPLICATIONS (ASTM D-4048)
V-2 PLUS may be used on steel, aluminium brass, copper, Service Rating 260°C (500°F)
iron, polyethylene, reinforced fibreglass, and PVC. Do not Natural Gas Pressure Test:
use V-2 PLUS on ABS and CPVC. For ABS and CPVC 15514kPa (2250psi), 10 days @ 23°C (73°F) PASS
use JET-LUBE TFW Thread Sealant with PTFE. Pressure to 10,000 psi Liquid
V-2 PLUS is recommended for threaded pipe carrying: to 2,000 psi Gases
Air Diesel Fuel LP Gas
Ammonia Heating Oils Natural Gas
Brine H2S Nitrogen, Gaseous
PACKAGING
Butane/Propane Hydraulic Oil Refrigerants Code No. Size Container
CO2 Inert Gases Steam 35603 300g Tub
Dilute Caustics and Kerosene Water
acids LIMITED WARRANTY
Jet-Lube (UK) Limited makes the Limited Express Warranty that
RATINGS at the date of delivery, this product shall be free from defects in
U.S. MILITARY SPECIFICATIONS: Meets or exceeds Jet-Lube (UK) Limited materials and workmanship.
Federal Specification TT-S-1732. This limited Express Warranty is expressly in lieu of any other
BRITISH STANDARDS: This product has satisfied test express or implied warranties, including any implied warranty of
merchantability or fitness for a particular purpose, and of any other
criteria as set forth in British Standard 6920: part 1 and 2:
obligation on the part of Jet-Lube (UK) Limited.
1988 and is UK WRAS Listed for potable water. The sole remedy for breach of the Limited Express Warranty shall
This compound is suitable for use as a Class A, Class Arp be the refund of the purchase price. All other liability is negated
and Class B thread sealant as defined by BSEN751-2: 1997 and disclaimed, and Jet-Lube (UK) Limited shall not be liable for
for gas pipe connections, thus making it suitable for gas incidental or consequential damages.
installation work carried out by CORGI registered
personnel.
NSF rated P-1 (incidental contact, misc products)
