Control & Monitoring Relays
Digital Control Realy MCU-10...P/N/T
MCP-10 INTRO...
MCU-10
DV/AV
MCU-10
DC/AC
DESCRIPTION OPERATION
Digital control relay with 3½-digit LCD display. The display shows the actual input signal when the supply voltage
MCU-10
The control relay is used for control and measurement of Tempera- is connected.
P/N/T
ture with Pt-100, Ni-100, and thermistors The setpoint is displayed by pressing the S button and the setpoint
The actual input signal type and measuring range must be specified is adjusted on the front mounted potentiometer.
when the control relay is ordered. The output mode switch for selecting whether the output relay
MCU-10
J/K/S/R
3½ digit LCD display with selectable read-out of actual input and should be energized above or below the adjusted setpoint, see the
setpoint. diagrams below.
Output relay with LED indication of energized output relay. The red LED indicator will light up when the output relay is energized.
Built-in power supply for direct mains supply. Galvanic isolation
between input and supply.
MCU-10
Standardized housing for 11-pole plug-in or DIN rail mounting. Mode 1: Output relay energized below setpoint
Bases for DIN rail,surface and chassis mounting are listed under hysteresis
Accessories for MCP-10, see page 128.
U
Input setpoint
MXV-10
MXV-20
Mode 2: Output relay energized above setpoint
hysteresis
Input setpoint
MXC-10
VERSION/ORDERING CODES
Type: MCU-10 S 1 230 P1
FRONT
MXC-20
Digital control relay. MCU-10
Front Front label
Mounting:
11-pole plug-in. S
DIN rail. D
MXC-30
1 2
Output relay:
SPDT 1 A1
1 2
+1 +2 -0
Supply voltage: 6
MXV-30
12-48VDC/10-30V AC G24 MCU
12V AC/DC 912 1)
24V AC/DC 924 1) 5
24V AC 024
RPM
MXP-10
110/120VAC 115
220/240V AC 230 3
380/415V AC 400
Input:
4
MXP-20
RTDs: 15 16 18 A2
Pt-100:
-50.0-199.9°C. P1
-50-850°C. P3
MXL-10
Ni-100:
-50.0-199.9°C. N1 1 Output mode selector. 2 LED indication of energized output relay.
3 Button for setpoint read-out. 4 Setpoint adjustment. 5 Unit label
Thermistor (KTY): position. 6 Display field.
MXT-10
-30.0-100.0°C. T1
47.98
Export: United Kingdom: Germany:
Tel: +45 46 74 00 00 Tel: +44 020 8546 4283 Tel: +49 208 46954-0
Fax: +45 46 75 73 36 Fax: +44 020 8547 3628 Fax: +49 208 46954-50
E-mail: bc@[Link] E-mail: bcs@[Link] E-mail: ba@[Link]
45
MCU-10PNT_00.p65 9 26-10-01, 12:29
Control & Monitoring Relays
Digital Control Relay MCU-10...P/N/T
TECHNICAL DATA WIRING DIAGRAMS
RTD/Thermistor (2-wire) RTD/Thermistor (3-wire)
Measuring ranges:
RTDs/Thermistors
Pt-100 Ni-100 Thermistor (KTY) A1 +1 +2 -0 6 A1 +1 +2 -0 6
-50.0-199.9°C -50.0-199.9°C -30.0-100.0°C 5 7 5 7
4 8 4 8
-50-850°C
3 9 3 9
2 10 2 10
Measuring accuracy: 1% of full scale ± 1 digit. 15 16 18 A2
1 11
15 16 18 A2
1 11
Supply Supply Supply Supply
Hysteresis: 1% of full range. +/L -/N +/L -/N +/L -/N +/L -/N
Temperature drift: Max. 0.01% per °C.
Display: 3½-digit LCD-type (-1999 to 1999). The MCU-10 temperature controller is supported by a wide range of
Digit height: 6.5 mm. temperature sensors, see the temperature sensor data sheet for
Display update time: Typically 0.4 sec. detailed technical information and ordering codes.
Scale: The scale is adjusted to the actual measur
ing range listed in the ordering key, except
U1 version with user adjustable scale
(-1999 to 1999, max. 2000 steps).
Output relay: SPDT (single changeover contact).
Load (cosϕ=1): D1/S1: Max. 8A/240V AC
Min. 10mA/24VDC
Frequency: Max. 1000 operations per hour at max. load.
Mechanical life time: Min. 10 x 106 operations.
Electrical life time: Min. 100.000 operations at max. load.
Time delay: Typically 1s.
Mounting: S1: 11-pole plug-in.
D1: Directly on 35 mm DIN-rail (EN50022).
Terminals: Max. conductor size 4 mm2.
Screw type terminals with self-lifting clamps shrouded in accord-
ance with VDE0106 (finger and back of hand protection).
Supply voltage: 12-48V DC (10.5-60V)/12-30V AC(10.5-35V).
12V AC/DC (10-18V) 1) .
24V AC/DC (18-35V) 1) .
24V AC (22-26V).
110/120V AC (95-135V).
220/240V AC (195-265V).
380/415V AC (342-418V).
Mains frequency: 45-66Hz.
Consumption: 1-3VA.
Protection: S1: IP40.
D1: IP20.
EMC: Conforming to EN 50081-2/EN 50082-1.
Ambient temperature:-25-55°C.
Isolation:
AC versions: 4kV AC according to EN 60950 class II.
G24 version: 1kV AC
Dimensions: Identical to MCP-10, see page 38.
Housing: Black Noryl SE-1.
Weight: Typically 170 g.
NOTES/REMARKS
1) There is no galvanic isolation between input and supply. External
isolation should be provided to prevent damage to the controller
when measuring voltage/current or a G- or other version with in-
ternal isolation should be used.
47.98
Export: United Kingdom: Germany:
Tel: +45 46 74 00 00 Tel: +44 020 8546 4283 Tel: +49 208 46954-0
Fax: +45 46 75 73 36 Fax: +44 020 8547 3628 Fax: +49 208 46954-50
E-mail: bc@[Link] E-mail: bcs@[Link] E-mail: ba@[Link]
44
MCU-10PNT_00.p65 10 26-10-01, 12:29
