User Manual (3) Phone Port (4) LAN Port 1.
(3) Phone Port (4) LAN Port 1.4 Picture and guide for installation of external antenna, LAN, adaptor
and PC.
(5) USB port (6) DC Power
Thanks for choosing this wireless router, please read the user manual
carefully so that it will be more convenient for you to use the router. (7) Power Switch (8) Reset Button
(9) SIM Card (10) External ANT Interface
1. Product Manual
(11) Power LED (12) WIFI/WPS LED
1.1 Product diagram
(13) LTE LED (14) Signal Strength LED
1.3 Indicator
Type Status Description
Power Blue On Power normal, the router power on
Blue Off Power abnormal, the router power off • Turn off the router and unplug the power adapter before installing any
Blue On WIFI is opened and has data transmission external panel antenna.
WLAN
• Do not use external antenna during thunderstorms.
1.2 Product interface Blue blink WPS
• Only use external antennas provided by your carrier.
Blue Off WIFI closed
Internet Blue Connected the internet
2. Quick Configuration Guide
Red Not connected
The router supports standard RJ45 cable or WLAN wireless way to connect
One The Signal is poor computer, Supports Windows XP/Windows 7/Windows 8/Window 10/MAC
OS/Linux/Android, and so on.
Two Signal is moderate
Signal
Three Signal is good
（1） Insert the SIM Card according to the given instructions.
Four Signal is good Connect the LAN cable to the LAN port and then check the power
Five Signal is very good adapter label and device sticker if matched, before plug it to the power
outlet.
(1) WPS Button (2) WLAN ON/OFF Switch
（2） Set your computer network to obtain IP address automatically. Once the （3）1 x LAN Port Cable (RJ45) （4）1 x User Manual Long press the reset button for more
computer get the 1P address, open your web browser and type the （5）2 x External Antenna Change user page login password or than 5 seconds to restore the factory
default gateway IP address “192.168.0.1. SSID password, but forget the settings, and then check the
（3） Click the “Login” in the upper right corner to access the user page using 4. Precautions
password username and password in the back
the username and password indicated at the device sticker at the bottom （1） When you remove and insert the SIM card, please ensure the device is label information.
of the router. powered off.
（2） Do not use the equipment in case of lightning and unplug the external
antenna and power adapter.
（3） If the device is working fine, do not change the parameter or other
functions, if changed and cannot access Internet, please try to reboot,
press and hold the reset button for more than 5 seconds to restore the
factory settings.
5. Common faults and treatment methods
Common faults Treatment methods
Check the power adapter if properly
The device is powered on but the front plug in the power outlet and the device
panel power light is off. power port. Check the cable for any
damaged
（4）Wi-Fi configuration Check if the computer’s LAN network
Wi-Fi is enabled by default, and the default Wi-Fi name and password are status obtained automatically IP
Computer local connection is not
provided on the device sticker label. address from the device DHCP pool,
displayed, cannot successfully PING
You are advised to keep the default Wi-Fi name and password unchanged. reboot your computer and your
IP address of the device, cannot open
If you need to modify them, login first to the device website, click Device modem. Clear your browsing history /
the WEB page.
Settings > Wi-Fi-2.4GHz settings or Wi-Fi-5GHz setting and then follow the CACHE. Check your LAN cable if
instruction to set your own Wi-Fi password. properly plug in the LAN port.
Set the computer to automatically
3. Package Contents The device is working but cannot
obtain the IP address and DNS server
（1）1 x Router （2）1 x Power Adaptor access the internet through the web
address.
