HP System Board Replacement &
System Diagnostic Tool
Overview
8/7/22/2017
HP has combined the primary DMIFIT tools needed
to replace a system board on to a single USB key.
Dos WINPE 32 WINPE 64 Dos
WINPE 32
WINPE 64
The new tool utilizes a menu system to
select which environment to boot to.
Legacy Boot / Main Menu DMIFIT Submenu
HP Field Service &
Key Schematic Diagnostic Tool
F2 (UEFI Diagnostics)
DOS Environment UEFI Environment
• HP Memory Test
Utility
Main Menu
• HP Hardware 1. Intel ME Firmware Update Utility (UEFI)
Vision Diagnostics 2. ME Configuration Utility
DMIFIT Utilities
Submenu 3. TPM Configuration Utility
4. Dedicated UEFI Tools / Platforms
DOS NBDMIFIT WNDMIFIT (WINPE) 5. Lock System Board Utility
• Intel ME Firmware WNDMIFIT Sub-Menu
Update Utility (DOS)
• Run WNDMIFIT
• NBDMIFIT
• Reset MPM Counter
• Lock MPM
• Set Sure Start Bit
• Get BIOS Configuration.
The overall DMI process has
not changed, all the tools
are now simply on one key.
The consolidated USB key will not support
the following platforms as they cannot
boot to the legacy environment.
HP ProBook x360 11 G1 Pro Tablet 608 G1 ElitePad 1000 HP Pro Tablet 10 EE G1 ElitePad 900
Technicians will need to carry the WINPE 32 / 64 USB
standalone keys for these platforms.
