S5750X Series

L3 10G Copper Routing Switch

Product Overview
DCN S5750X copper series switch is full stackable routing switches with fixed,
built-in 10GbE uplink ports. These fully managed switches provide high availability,
scalability, security, energy efficiency, and easy operation with rich L3 features. It is
ideal for aggregation or access layer for campus, enterprise, government and service
provider networks.

The following models are available in the S5750X copper series.

Appearance Description
 24*10/100/1000Base-T + 6*10GbE(SFP+)
 1 console, 1 USB, 1 RJ45 management port
 AC power supply
S5750X-24T6X-SI  Switching capacity: 168Gbps
 Forwarding rate: 125Mpps
 24*10/100/1000Base-T PoE + 6*10GbE(SFP+)
 1 console, 1 USB, 1 RJ45 management port
 PoE/PoE+ up to 370w
 AC power supply
S5750X-24T6X-P-SI  Switching capacity: 168Gbps
 Forwarding rate: 125Mpps
 48*10/100/1000Base-T + 6*10GbE(SFP+)
 1 console, 1 USB, 1 RJ45 management port
 AC power supply
S5750X-48T6X-SI  Switching capacity: 216Gbps
 Forwarding rate: 161Mpps
 48*10/100/1000Base-T PoE + 6*10GbE(SFP+)
 1 console, 1 USB, 1 RJ45 management port
 PoE/PoE+ up to 740w
 AC power supply
S5750X-48T6X-P-SI  Switching capacity: 216Gbps
 Forwarding rate: 161Mpps

Email: sales@[Link] Website: [Link]

1
Key Features and Highlights
Performance and Scalability leave. L3 multicast protocols such as IGMPv1/v2/v3.
With high switching capacity, S5750X series support With Multicast VLAN Register (MVR), multicast re-
wire-speed L2/L3 forwarding and high routing per- ceiver/sender control and illegal multicast source de-
formance for IPv4 and IPv6 protocols. tect functions; S5750X series provides a great applica-
The 10 Gigabit Ethernet connectivity of S5750X is tion experience for the customer.
accomplished via a hot-pluggable 10 Gigabit SFP+
transceiver which supports distance up to 300 meters High-Reliability network
over multimode fiber and 10 to 40km over sin- MRPP is a Multi-layer Ring Protection Protocol, which
gle-mode fiber (The distance depends on the optical is DCN’s private fast Ethernet ring protocol. Compar-
module chosen). ing to spanning tree protocol, it has the advantages of
fast convergence, simple protocol calculation, fewer
VSF (Virtual Switch Framework) system resources cost, and so on, which can improve
Virtual Switch Framework can virtualize multiple the reliability of Ethernet network operation.
DCN switches into one logical device, achieving the
sharing of information and data tables between differ- Comprehensive QoS
ent switches. The performance and ports density of the With 8 queues per port, S5750X series enable differen-
virtualized device is greatly enlarged by times under tiated management of up to 8 traffic types. The traffic
VSF. VSF also simplifies management work for the is prioritized according to IEEE802.1p, DSCP, IP
network administrator and provides more reliability. precedence, and TCP/UDP port number, giving opti-
mal performance to real-time applications such as
Rich L3 Features voice and video.
S5750X series delivers high-performance, hard- S5750X series also supports Bi-directional rate-limiting,
ware-based IP routing. RIP, OSPF, ISIS and BGP pro- per port or traffic class preserves network bandwidth,
vide dynamic routing by exchanging routing infor- and allows full control of network resources.
mation with other Layer 3 switches and routers. With
S5750X series, customers could easily achieve Poli- Abundant IPv6 Support
cy-based Route (PBR), which is important when they S5750X series supports IPv6 switching and routing
need a multi exit application. based on hardware for maximum performance. With
increased network devices growing the need for larger
Strong Multicast addressing and higher security become critical,
S5750X series supports abundant multicast features. In S5750X series will be the right product to meet this
Layer 2, such as IGMPv1/v2/v3 snooping and fast requirement.

Specifications
Item S5750X-24T6X-SI S5750X-48T6X-SI S5750X-24T6X-P-SI S5750X-48T6X-P-SI
24*10/100/1000Base-T 48*10/100/1000Base-T 24*10/100/1000Base-T 48*10/100/1000Base-T
+ 6*10GbE(SFP+) + 6*10GbE(SFP+) PoE + PoE +
Physical port
Auto-MIDX Auto-MIDX 6*10GbE(SFP+) 6*10GbE(SFP+)
Auto-MIDX Auto-MIDX
1 x RJ45 Ethernet Management port
Management
1x Console port
port
1x USB2.0 interface
Performance
Switching Ca-
168Gbps 216Gbps 168Gbps 216Gbps
pacity
Forwarding rate 125Mpps 161Mpps 125Mpps 161Mpps
Jumbo Frame 12K 12K 12K 12K
MAC Address 32K 32K 32K 32K
ARP Table 1K 1K 1K 1K
Routing Table 1K 1K 1K 1K

Email: sales@[Link] Website: [Link]

1
ACL Table 3K 3K 3K 3K
Physical
Dimension 440mm x 44mm x 440mm x 44mm x 440mm x 44mm x 440mm x 44mm x
(W*H*D) 380mm 380mm 380mm 380mm
Relative 5%~95%, non-condensing
Humidity
Temperature Working 0°C~50°C, storage -40°C~70°C
Power Supply AC:100~240VAC, 50~60Hz
Power <40W <55W <450W <840W
Consumption
PoE NA NA IEEE 802.3af IEEE 802.3af
IEEE 802.3at IEEE 802.3at
Total PoE power: Total PoE power:
370W 740W
Main Features
IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X),
IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x,
IEEE802.3ak(10GBASE-CX4)
Port loopback detection
LLDP and LLDP-MED
UDLD
802.3ad LACP, max 128 group trunks with max 8 ports for each trunk
LACP load balance
ERPS (G.8032)
N:1 Port Mirroring
RSPAN
IEEEE802.1d(STP)
IEEEE802.1w(RSTP)
IEEEE802.1s(MSTP)
L1, L2 Features Root Guard
BPDU Guard
BPDU Tunnel
802.1Q, 4K VLAN
MAC VLAN, Voice VLAN, PVLAN, Protocol VLAN, Multicast VLAN
QinQ, Flexible QinQ
GVRP
N:1 VLAN Translation
Broadcast / Multicast / Unicast Storm Control
IGMP v1/v2/v3 Snooping and L2 Query
ND Snooping
MLDv1/v2 Snooping
Port Security
Flow Control: HOL, IEEE802.3x
Bandwidth Control
Static Routing, RIPv1/v2, ISIS, OSPFv2, BGP4
OSPFv3, BGP4+
OSPF multiple processes
VRF-Lite
LPM Routing
L3 Features
Policy-based routing (PBR) for IPv4 and IPv6
VRRP
URPF,
ECMP
BFD

Email: sales@[Link] Website: [Link]

2
 IGMP v1/v2/v3, IGMP Proxy,
Static Multicast Route
Multicast Receive Control
Illegal Multicast Source Detect
ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP Limit
Anti ARP Cheat, Anti ARP Scan
DNS Client, DNS Relay
GRE Tunnel
6to4 Tunnel, Configured Tunnel, ISATAP Tunnel, GRE Tunnel
ICMPv6, ND, DNSv6
IPv6 LPM Routing, IPv6 Policy-based Routing (PBR)
IPv6 IPv6 VRRPv3, IPv6 URPF, IPv6 RA
RIPng, OSPFv3, BGP4+
MLD Snooping, IPv6 Multicast VLAN
MLDv1/v2, IPv6 Anycast RP, IPv6 ACL, IPv6 QoS
8 Queues
SP, WRR, SP+WRR
QoS WRED
Traffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port number
Traffic Policing
PRI Mark/Remark
IP ACL, MAC ACL, IP-MAC ACL
Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP
port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS
ACL Redirect and statistics
Rules can be configured to port, VLAN, VLAN routing interfaces
Time Ranged ACL
ACL rules can be configured to port, VLAN
802.1x AAA
Port, MAC-based authentication
Accounting based on time length and traffic
Security Guest VLAN and auto VLAN
RADIUS for IPv4 and IPv6
TACACS+ for IPv4 and IPv6
MAB
DHCP Server/Client for IPv4/IPv6
DHCPv4/v6
DHCP Relay/Option 82
Traffic Monitor
DHCP Snooping/Option 82
Traffic Monitor sFlow Traffic Analysis
CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6
Syslog and external Syslog Server
HTTP SSL
SNMP MIB, SNMP TRAP
Security Net- FTP/TFTP
work Manage- SNTP/NTP
ment RMON 1,2,3,9
Authentication by Radius/TACACS
SSH v1/v2
Dual firmware images/ Configuration files
802.3ah OAM, 802.1ag OAM
Data Center VSF (Virtual Switch Framework)
Features
The contents marked with “*” need a future upgrade or are under development

Email: sales@[Link] Website: [Link]

3
 Application
S5750X series switches are deployed as Gigabit access with 10G uplink in a campus, enterprise or ISP network

Order Information
Product Description
S5750X-24T6X-SI 10G L3 Switch (24*10/100/1000Base-T + 6*10GbE(SFP+)) , 1 fixed AC

S5750X-48T6X-SI 10G L3 Switch (48*10/100/1000Base-T + 6*10GbE(SFP+)) , 1 fixed AC

S5750X-24T6X-P-SI 10G L3 Switch (24*10/100/1000Base-T PoE + 6*10GbE(SFP+)) , PoE/PoE+, PoE

Power output 370W, 1 fixed AC
S5750X-48T6X-P-SI 10G L3 Switch (48*10/100/1000Base-T PoE + 6*10GbE(SFP+)) , PoE/PoE+, PoE
Power output 740W, 1 fixed AC

Email: sales@[Link] Website: [Link]