conditions, by doing the kernel drying process at the beginning or at the end of the processing, it will
speed up the cooked kernel. Before doing the factory processing, the boiler has produced steam, the
steam produced from the boiler can be used to process kernel heating on the silo drier. It is
expected that from the drying process at the beginning or end of the kernel process it can cook
faster. Kernels that have met the standard holding time (14-16 hours) will be cooked and ready to be
shipped. If the achievement of factory capacity is according to the above calculation, which is 52
tons/hour, with a kernel percentage of 8.7% and a holding time of 16 hours, then the flow of
material can be calculated to be accommodated in the silo kernel, as used this equation.
Total kernel = 52 tons/hour x 8.7 % x 16 hours = 72.4 tons
conditions, by doing the kernel drying process at the beginning or at the end of the processing, it
will speed up the cooked kernel. Before doing the factory processing, the boiler has produced steam,
the steam produced from the boiler can be used to process kernel heating on the silo drier. It is
expected that from the drying process at the beginning or end of the kernel process it can cook
faster. Kernels that have met the standard holding time (14-16 hours) will be cooked and ready to be
shipped. If the achievement of factory capacity is according to the above calculation, which is 52
tons/hour, with a kernel percentage of 8.7% and a holding time of 16 hours, then the flow of
material can be calculated to be accommodated in the silo kernel, as used this equation.
Total kernel = 52 tons/hour x 8.7 % x 16 hours = 72.4 tons
conditions, by doing the kernel drying process at the beginning or at the end of the processing, it
will speed up the cooked kernel. Before doing the factory processing, the boiler has produced steam,
the steam produced from the boiler can be used to process kernel heating on the silo drier. It is
expected that from the drying process at the beginning or end of the kernel process it can cook
faster. Kernels that have met the standard holding time (14-16 hours) will be cooked and ready to be
shipped. If the achievement of factory capacity is according to the above calculation, which is 52
tons/hour, with a kernel percentage of 8.7% and a holding time of 16 hours, then the flow of
material can be calculated to be accommodated in the silo kernel, as used this equation.
Total kernel = 52 tons/hour x 8.7 % x 16 hours = 72.4 tons
Kernel Drying Beginning or End of Process This treatment can be done in normal fruit conditions, by
doing the kernel drying RESULTS AND DISCUSSION Cycle Time/Sequencing Time Settings Achieving
factory capacity in the range of 50-52 tons/hour can be done by setting the sequencing time. In the
boiling time boiling process greatly affects the achievement of the cooking capacity itself. The actual
squaring time achieved tends to be above 55 minutes, without changing the steam time by reducing
the sequencing time from doing the kernel drying The success of the quantity and quality of
production results can be indicated from the performance of the palm oil mill through the
achievement of production, if it is associated with productivity it will not be separated from the
capacity of the mill. Achievement of
