Inductive Sensors
BES 516-133-MO-C-02
Order Code: BES0179
1) Sensing surface
Basic features Electrical data
Approval/Conformity CE Load capacitance max. at Ue 1 µF
UKCA Min. operating current Im 0 mA
WEEE No-load current Io max., damped 32 mA
Basic standard IEC 60947-5-2 No-load current Io max., undamped 20 mA
Operating voltage Ub 10...30 VDC
Display/Operation Output resistance Ra 2.2 kOhm + D + LED/4.7 kOhm +
D
Function indicator yes
Rated insulation voltage Ui 75 V DC
Power indicator no
Rated operating current Ie 200 mA
Rated operating voltage Ue DC 24 V
Electrical connection Rated short circuit current 100 A
Cable diameter D 4.60 mm Ready delay tv max. 10 ms
Cable length L 2m Residual current Ir max. 80 µA
Conductor cross-section 0.25 mm² Ripple max. (% of Ue) 15 %
Connection type Cable, 2.00 m, PVC Switching frequency 500 Hz
Number of conductors 4 Utilization category DC -13
Polarity reversal protected yes Voltage drop static max. 2.5 V
Protection against device mix-ups yes
Short-circuit protection yes
1/2
Internet [Link] eCl@ss 9.1: 27-27-01-01
Subject to change without notice: 270418 ETIM 6.0: EC002714
BES0179_0.79_2023-06-27
Inductive Sensors
BES 516-133-MO-C-02
Order Code: BES0179
Environmental conditions Material
Ambient temperature -25...70 °C Housing material Aluminium
Contamination scale 3 Material jacket PVC
EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms Material sensing surface PBT
EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min
IP rating IP67 Mechanical data
Dimension 50 x 25 x 10 mm
Functional safety Installation for flush mounting
MTTF (40 °C) 1015 a Size 50x25x10
Interface Range/Distance
Switching output PNP normally open/normally Assured operating distance Sa 4 mm
closed (NO/NC) Hysteresis H max. (% of Sr) 15.0 %
Rated operating distance Sn 5 mm
Real switching distance sr 5 mm
Repeat accuracy max. (% of Sr) 5.0 %
Temperature drift max. (% of Sr) 10 %
Tolerance Sr ±10 %
Remarks
The sensor is functional again after the overload has been eliminated.
For more information about MTTF and B10d see MTTF / B10d Certificate
Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with
no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.
Wiring Diagrams
2/2
Internet [Link] eCl@ss 9.1: 27-27-01-01
Subject to change without notice: 270418 ETIM 6.0: EC002714
BES0179_0.79_2023-06-27
