0% found this document useful (0 votes)
101 views2 pages

Baby Brezza Instant Warmer Cleaning Guide

The document provides cleaning and maintenance instructions for the Baby Brezza Instant Warmer, emphasizing the importance of unplugging the device before cleaning and avoiding immersion in water. It includes descaling procedures to prevent malfunction and safety precautions for using the appliance. Additionally, it outlines proper usage guidelines and customer service information for troubleshooting issues.

Uploaded by

matkobezkubka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
101 views2 pages

Baby Brezza Instant Warmer Cleaning Guide

The document provides cleaning and maintenance instructions for the Baby Brezza Instant Warmer, emphasizing the importance of unplugging the device before cleaning and avoiding immersion in water. It includes descaling procedures to prevent malfunction and safety precautions for using the appliance. Additionally, it outlines proper usage guidelines and customer service information for troubleshooting issues.

Uploaded by

matkobezkubka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Cleaning Always unplug the Instant Warmer before cleaning.

Before each use, hand wash Water Container and Lid in warm, soapy water, rinse and
dry thoroughly.

CAUTION: The Instant Warmer contains electronics. Exposing the electronics to water can
cause permanent damage not covered by the warranty.

Please take note of the following:


• Do not immerse the Instant Warmer in water or other liquid.
• Hand-Wash Only. Not Dishwasher-Safe. Using a dishwasher may damage the electronics
inside.
• Note: If the Instant Warmer is accidentally immersed and water gets inside, wipe with
a clean dry cloth and allow it to dry completely before next use.
• Base should be wiped with damp cloth only.
• Never use abrasive pads to clean the Instant Warmer parts.

Descaling:
Please descale the heating plate of the Instant Warmer every 2-3 weeks (or as necessary) to
prevent malfunction or product failure. Mineral residue, particularly in hard water areas,
may deposit on the heating plate after prolonged use.
- Empty the water tank before descaling.
- Pour 60ml white vinegar on the heating plate and let it rest for approximately 30 minutes.
- Pour the vinegar out of the water tank and rinse the water tank thoroughly.
- Wipe the heating plate and inside of the water tank with a clean, dry cloth.
Some harmless discoloration spots may remain after cleaning but they have no effect
on performance.
- After completing descaling you can use the product normally.

Customer Service
If you are experiencing problems with your Baby Brezza Instant Warmer, visit:
[Link]/pages/international
to locate your local customer service representative.

Instructions
For set-up, use and cleaning
[Link] Please read fully to ensure your Instant Warmer works properly every time
3 ©2022 Baby Brezza Enterprises LLC EN
IMPORTANT SAFEGUARDS Instant Warmer Parts
When using electrical appliances, basic safety precautions should always be followed, including the Water Container
following: Get to know your Baby Brezza Lid
1. Read all instructions before using. Instant Warmer MAX line
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock do not immerse cord, plug or appliance in water or other liquid.
4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, Water Container
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved. Blue, Yellow, Red LED light MIN line
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision. Power Button Temperature Button
5. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the ! WARNING: Dispensing Lever
appliance in a safe way and understand the hazards involved.
6. Children shall not play with the appliance • Never fill Water Container with formula Base
7. The use of accessory attachments not recommended by the appliance manufacturer may cause • Always use distilled or boiled water
fire, electric shock or injury.
8. Use on level surface and be sure there is no debris under the unit and the rubber pads are cooled to room temperature
touching the surface. • Never pour boiling water into Water Container
9. Household use only. Do not use outdoors. • Always keep water filled above MIN Line Dispensing Spout
10. Do not let cord hang over edge of table or counter, or touch hot surfaces. • Always keep the water tank covered with lid
11. Do not place on or near hot gas or electric burner, or in a heated oven. to avoid contamination
12. Extreme caution must be used when moving an appliance containing hot liquids. Power Cord
13. Do not use appliance for other than intended use. (not shown)
14. If any misuse, such as putting liquid that other than water to the water container. It will create potential
injury from misuse.
How to Use
15. After heating or all the water is removed from the water tank, the heater surface is subject to residual 1 Hand Wash Water Container & Lid before first use. See cleaning instructions on page 3.
heat after use.
16. Except cleaning, any other servicing should be performed by an authorized service representative. 2 Plug in power cord.
17. Make sure machine is turned off before unplugging.
18. A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over a
longer cord. Extension cords are available and may be used if care is exercised in their use. 3 Fill Water Container with as much water as you plan to use for the day. We recommend
19. If using the machine with an extension cord, make sure the cord is the proper electrical rating for refreshing the water every 24-48 hours and rinsing the Water Container every time it’s
the machine. The marked electrical rating of the cord set or extension cord should be at least as refilled.
great as the electrical rating of the appliance. The extension cord should be arranged so that it
does not drape over counter top or tabletop where it can be pulled on by children or tripped over 4 Touch the button to turn on the instant warmer.
unintentionally.
20. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is 4 Touch the button to choose your desired temperature.
dropped or damaged in any manner. Contact Baby Brezza Customer Service using the contact
information on the back cover for assistance. • Blue LED = heater off, room temperature
• Yellow LED = body temperature*
This marking indicates that products should not be disposed of with other • Red LED = warmer than body temperature*
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the The LED will flash while water is warming.
sustainable reuse of material resources. To return your used device, please use The LED will remain solid when water is warmed to selected temperature.
the return and collection systems or Contact the retailer where the product You can leave the Instant Warmer plugged in and set to your desired temperature so
was purchased. They can take this product for environmentally safe recycling. warm water is always ready.
* Warming time may take 10-20 minutes depending on starting temperature of water
ALWAYS use boiled, cooled water or bottled water suitable for infant formula preparation. poured into water container.

TECHNICAL DATA Model: BRZ0057EU Current: 0.69 A 5 Place bottle under Dispensing Spout and press Dispensing Lever to dispense water.
Release lever to stop dispensing.
Supply Voltage: 220-240V ~ 50 - 60Hz Heater Power: 160W
6 Add formula powder to bottle. Always follow formula manufacturer’s mixing ratio and
preparation instructions.
1 2
SAVE THESE INSTRUCTIONS

You might also like