BASIC TECHNOLOGY EXAM
QUESTIONS FOR JSS2 SECOND TERM
4 minutes read
JSS2 SECOND TERM BASIC
TECHNOLOGY EXAMINATION
QUESTIONS – [Link]
Examination malpractices may lead to a repeat of the subject or
suspensions don’t be involved.
Subject: BASIC TECHNOLOGY
Duration: 2HRS
Class: JSS 2
OBJECTIVE
1. ___________ are basically four sided plane figure (a) Quadrilaterals (b)
Polygons (c) Board practice (d) Drawing boards
2. __________ all sides and angles are equal (a) Square (b) Rectangle (c)
Trapezium (d) Kite
3. __________ are plane figures bounded by more than four straight lines .
(a) Trapezium (b) Square (c) Polygons (d) Kite
4. Pentagon has _______ Sides (a) 6 (b) 5 (c) 8 (d) 10
5. Polygon with 8 sides is Called ________ (a) Heptagon (b) pentagon (c)
Octagon (d) Decagon
6. Polygon with Six Sides is Called _______ (a)Octagon (b) Hexagon (c)
Decagon (d) Heptagon
7. __________ is a Straight line which touches the circumference at a Point
(a) Tangent (b) Arcs (c) Rectangle (d) Square
8. ________ is a Plane figure bounded by three straight lines (a) Rectangle
(b) Triangle (c) Square (d) Trapezium
9. _________ is a triangle that has three equal sides and three angles (a)
Equilateral Triangle (b) Isosceles Triangle (c) Scalene Triangle (d) Right
angle Triangle
10. __________ Can be defined as an operation organized to free from
danger (a) First aid operation (b) Rescue operation (c) Responsive
operation (d) Caring operation
11. Which of the following cannot be regarded as a rescue operation (a)
Vehicle-extrication rescue operation (b) Surface water rescue
operation (c) Air – Sea rescue operation (d) First aiding
12. Workshop accident includes the following except (a) Fracture (b)
Bleeding (c) voltaging (d) Wound
13. ________ is a table on which wood workers perform his operation (a)
Workbench (b) Imperial board (c) Dove Tail table (d) Tenon Table
14. Mixture of Sand, gravel, cement with water is Called (a) Plastering (b)
rendering (c) Concrete (d) Plastics
15. ________ is the name of buildings that contains many rooms on two
floors (a) Duplex (b) Bungalow (c) hut (d) High – Rise
16. Angles can be measured using ____ (a) French Curve (b) Compass (c)
Protractor
17. The instrument used for drawing irregular curve is called (a) divider
(b) Compass (c) Scale Rule (d) French Curve
18. The following methods can prevent accident while working in the
workshop, except (a) always use the right tools for each job (b) Always
keeps to instructor (c) Avoid using worn out tools (d) Always do more
than two jobs at the same time
19. ________ are equipment used in order to achieve safety? (a) Safely
devices (b) Fire extinguishers (c) Fire alarm (d) Fire buckets
20. Metals can be classified into _______ (a) Six (b) Five (c) Four (d) two
21. Papers are manufactured from _______ ceramics (b) Ferrous (c) alloy
(d) wood
22. The major purpose of maintenance in engineering is to ________ (a)
Keep it in good working condition (b) Prevent from making loud noise
(c) Stop it from working too long (d)Enable it to last forever
23. Workshop accident includes the following except (a) Fracture (b)
Bleeding (c) Plastering (d) Wound
24. One of the following is not among the rescue safely measures (a) Face
cap (b) Safely boot (c) hand gloves (d) helmets
25. First – aid can be used to care for the following except (a) Accident (b)
Injury (c) Headache (d) Blood Donation
26. __________ is used for transferring measurement (a) Divider (b)
punches (c) Micrometer (d) Try square
27. _________ is drawn at the bottom right hand corner of the drawing
paper (a) Boarder lines (b) Title block (c) Lettering (d) Figures
28. _______ are poor conductors of heat and electricity (a) Plastics (b) Metal
(c) Copper wire (d) Conductors
29. ___________ Plastic can be softened into liquid form and remoulded (a)
Thermosetting (b) Electric Plastic (c) Ceramic (d) Synthetic rubber
30. Any material that allows free flow of electrons and electricity is Called
_________ (a) Insulator (b) Conductors (c) Ceramics (d) Synthetic
31. The brown material between electric poles and the electric wire is
Called (a) Insulators (ceramic) (b) Thermoplastic (c) Synthetic (d)
Vulcanization
32. Glass belong to _________ family (a) Plastics (b) Synthetic rubber (c)
Thermo set Plastics (d) Ceramics.
33. Which of the following can be used for drawing vertical and inclined
lines ? (a) Protectors (b) Scale rule (c) Compass (d) Set square
34. Scale rules are used to produce (a) Reduced or enlarged sizes (b)
Equal and normal size of drawing (c) Enlarged sizes of drawing (d) A
good Linear drawing
35. Which of the procedures comes first in Constructing a building (a)
Excavation (b) concreting (c) Level (d) Site preparation
36. Which of the following is not a Quadilateral (a) Prism (b) Rhomboid (c)
Rhombus (d) Parallelogram
37. __________ are used to reduce wear and tear (a) Lubricant (b)
Vulcanization (c) Synthetic (d) Abrasives
38. Oil and Grease are used as_______ (a) Vulcanization (b) Lubricants (c)
Synthetics (d) abrasives
39. Polygon with (10) Ten sides is Called (a) Pentagon (b) Heptagon (c)
Nonagon (d) Decagon
40. We have types of technology (a) 5 (b) 4 (c) 3 (d) 2
JSS2 SECOND TERM BASIC TECHNOLOGY EXAMINATION QUESTIONS –
[Link]
THEORY: Answer only three Question
1a Define Polygon b Construct the following polygon
i Pentagon AB 50mm ii Hexagon AB 70mm iii Octagon
AB 70mm
2a Define Friction b State two advantages and two disadvantages of
friction
c Differentiate between Lubrication and Lubricants
d Mention two Lubricant used in reducing friction
3a Explain five care and maintenance that must be given to wood work
machines
b Explain two function of lathe machine
4 Sketch five workshop hard tools and Explain their uses
5a Explain the uses of the following technical drawing instrument
i Tee Square
ii Protractor
iii Set Square
iv Compass
v Divider
b Sketch tee square and label the parts
JSS2 SECOND TERM BASIC TECHNOLOGY EXAMINATION QUESTIONS –
[Link]
2 Comments
Zakka
March 17, 2022 at 9:34 pm
Good
Reply
Binta
September 18, 2024 at 2:43 pm
This is helpful.
Reply
/** * cleverwebserver * */
