Scribd
Upload
557 views1 page

Weekly Fire Pump Test Checklist

The document is a Weekly Fire Pump Test Form designed to ensure that all fire pumps are tested and inspected according to specified guidelines. It includes a checklist for various components and conditions that need to be verified, along with space for remarks. Immediate repairs are required if any issues are identified during the inspection.

Uploaded by

majidbutt107
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
557 views1 page

Weekly Fire Pump Test Checklist

The document is a Weekly Fire Pump Test Form designed to ensure that all fire pumps are tested and inspected according to specified guidelines. It includes a checklist for various components and conditions that need to be verified, along with space for remarks. Immediate repairs are required if any issues are identified during the inspection.

Uploaded by

majidbutt107
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ALSAEDAN-BT Powered By AIZAWA ALS-SMS-CL-13

Weekly Fire Pump Test Form Rev Date: 0.00

Parcel: Time:
Inspected by: Date:
Test all fire pumps. Enter correct settings in the shaded column. Make sure all test results are within
normal limits. If you find that repairs are needed, make them immediately and fellow manufacturer’s
instructions.
Driver Type, Make and Model: ___________________________

Pump Manufacture: _ NMC_____________________________ Year Installed: _____________________________

Manufacturer’s Model No: ____________________________

Description Yes No N/A


1 Materials are approved in accordance with received drawings and
project documents
2 Inspected name plate.
Date on equipment in accordance with specification and approval.
3 Check anchor bolt grouting and be sure that the location suits the
pump bed plate holes
4 check the pump base plate alignment
5 Check the grouting of the bed plate pump
6 Check the alignment of the motor and pump with dial gauge and
feeler gauge etc.
7 Check the electrical connections
8 Check the motor overloading
9 Check the piping connection with all accessories such as gate valve,
flexible connection and proper reducer at suction line and also check
globe, valve check valve, flexible connection and proper reducer etc.,
at discharge line as per specification and approval.
10 Check that the pressure gauges in suction and discharge line as per
specification and approval
11 Check for sufficient support of pipe lines connection to pump, since
pump flanges shall be free from stress and strain and free from load
of pipes
12 Hydrostatically test the pump casing along with pipelines.
13 Check water in upstream, isolating valve opened
14 Inspection of drive belts/hose, replace per manufacturer’s
recommended frequency.

Remarks:_____________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________

You might also like