Scribd
Upload
37 views8 pages

Electrical Circuit Analysis Problems

The document contains a series of electrical engineering numerical problems focused on circuit analysis, including calculations of voltage, current, resistance, and power using various theorems such as nodal analysis, KVL, KCL, Thevenin’s theorem, and Superposition theorem. It requires solving for specific values in different circuit configurations. The problems are aimed at enhancing understanding of basic electrical principles and circuit behavior.

Uploaded by

ashokkumarjha086
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
37 views8 pages

Electrical Circuit Analysis Problems

The document contains a series of electrical engineering numerical problems focused on circuit analysis, including calculations of voltage, current, resistance, and power using various theorems such as nodal analysis, KVL, KCL, Thevenin’s theorem, and Superposition theorem. It requires solving for specific values in different circuit configurations. The problems are aimed at enhancing understanding of basic electrical principles and circuit behavior.

Uploaded by

ashokkumarjha086
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Basic Electrical Numerical

1. Calculate the value of V1 and V2.

2. Calculate the voltage across the 10 ohm resistor.

3. Find the value of the currents I1 and I2.

4. What is the voltage across the 5-ohm resistor if current source has current of 17/3 A?
5. Calculate VAB.

6. Calculate the current across the 20-ohm resistor.

7. Calculate the total resistance between the points A and B.


Answer: c
8. Calculate the equivalent resistance between A and B.

9. Use nodal analysis to determine the voltage across 5 ohm resistance and the current
in the 12 V source.

10. Determine the voltages 1 and 2 of the network in Fig. by nodal analysis.
11. For the circuit shown in Fig, find VCE and VAG.

12. Find the current across 4 ohm.

13. Find the current across 10 ohm resistor using KVL.

14. Find the current across 3 ohm resistor using KCL.


15. Find the equivalent resistance for the circuit shown below.

16. Find the value of current across 50 ohm using KCL.

17. Determine the current in branch A-B by using KVL.

18. Find the value of Current across 12 ohm resistor using KCL.
19. Apply this theorem to calculate the current through the 4  resistor

20. calculate the current in the 10 ohm resistance. Use Thevenin’s theorem only.

21. Obtain the condition from maximum power transfer to the load RL. Hence
determine the maximum power transferred.

22. In the circuit shown, find the current through 4Ω resistor using Superposition
theorem.
23. Consider the circuit shown below. Find the voltage across 2Ω resistor due to the 10V
voltage source using Superposition theorem.

24. In the circuit shown below, find the value of load impedance for which source
delivers maximum power

25. Determine the maximum power delivered by the source in the below circuit shown

29. Calculate the maximum power transferred.


30. Calculate the value of RL across A and B.

You might also like