CURRICULUM VITAE
Name: SYED ASIF ALI
Position: Sr. Stress Engineer
Nationality: Indian
Educational Qualification: B.E in Mechanical, M. Tech in Aerospace
Professional Experience
More than 18 years of experience in Oil & Gas environment with functional expertise in EPC Projects.
Demonstrated competencies in Piping Design, Analysis, Engineering, Project, Procurement Support,
Drawing/Document review, Bid Support etc.
CLIENTS: ARAMCO, SABIC, PDO, SATROP, SADARA, PETRORABIGH, PETROKEMYA,
MAADEN, SASREF.
COMPANIES: Jacobs Zate (KSA), Samsung Engineering (Saudi Arabia), Amiantit Fiberglass, Dodsal
Engineering & Construction LLC, Composite pipe Industry, Core Engineering.
Membership and Affiliations: SAUDI COUNCIL OF ENGINEERS: 190786
NACE International-Jubail: NACEJ/13/675
APEGA Member: 231801
ARAMCO ID : 8196302.
COUNTRIES VISITED: Saudi Arabia, UAE, Oman, Canada, Europe, India & Bangladesh.
Overall responsibilities are as follows:
In depth knowledge of industry/regulatory design codes and standards applicable for Pipe Stress
Analysis design work
Identity different stress packages through review of P&ID’s/line designation tables
Full hands-on knowledge of stress analysis software like Caesar II and PIPNET.
Perform Piping Flexibility Analysis Static for critical piping systems during preliminary design
and detailed design phase of project.
Perform analysis for sustain, thermal and multiple operating cases, occasional (winds, seismic,
relief, hammer etc.)
Perform pipe stress analysis for different equipment like steam turbine, compressors, centrifugal
pumps, tanks, exchangers, heaters, columns, air coolers etc. to review of piping forces/moments
Perform stress analysis of pipe rack and produce support load report to structural.
Analysis the system to ensure stress, loads and displacement are within the limit as per project
requirement, recommendations for modification.
Carry out all calculations related to displacement of various equipment, branch reinforcement
calculation etc.
Provide pipe loading information to Civil/structure for design of pipe rack/structures and
foundations.
Resolve high pipe loads on equipment nozzles
Prepare stress critical line list of assigned projects.
Prepare spring support/hanger data sheet
Prepare and issue of piping loads to civil /structure and coordinate with structure for design of
1
support.
Prepare technical part of requisitions for all piping supports components required by stress
Analysis
Prepare stress analysis report, support design and mark upon piping drawings
Preparation and interpretation/review of stress calculations of relatively complex nature in high
seismic zone.
Locate and identify pipe supports on isometrics along with type of supports
Evaluation of local stresses via code cases like WRC107/297
Review and sign off piping isometrics considering flexibility and supporting.
Conversant with requirements like trunnion/ flange leakage calculations, qualification of
allowable nozzle loads
Review of client technical documents and requirements.
Review of vendor drawings and coordinate with other discipline
Prepare complete documentation of the stress analysis and support design.
Participates in reviewing and checking designs, drawings and data from suppliers
Understand the roles played by other disciplines on the projects
Provides technical direction and assigns work to engineers who are assigned on specific
assignments.
Responsible for quality and schedule for assigned piping stress analysis tasks.
Do technical bid evaluation for all piping supports components offers
Issues technical part of requisitions for all piping supports components purchase orders.
Review and approve vendors documents for stress related comments.
Checking of sub-contracted stress and support engineering documents.
Checking of isometrics being issued for construction for stress and support point of view.
Work History:
Galfar Engineering and Contracting W.L.L
Client : ADNOC
Title: Sr .Stress Analysis
Start :10-7-2024-Present
Project: P330335-Call -Out Services agreement for Tie-In at SQM
P330334-Call -Out Services agreement for Tie-In at Asab & Sahil
Responsibilities:
Prepare stress critical line list of assigned projects.
Perform stress analysis for Well head piping and flow lines.
Prepare stress analysis report, support mark upon piping drawings
Prepare and issue of piping loads to civil /structure .
Carry Out Nozzle and Flange Evaluation API-6AF2
JACOBS ENGINEERING (ZAMEL & TURBAG CONSULTING ENGINEERS).
2
Client: ARAMCO, SADARA, SATORP, SABIC, MAADEN GOLD
Title: Sr. Flexibility Engineer / Project Engineering Management-Piping
Start/End Dates: MAY-2015- July-2018
Project(s): SAG15087, SAG15105, SAG-15106, SAG-207101, SAG-15090,
MAADEN Gold, SADARA-SATORP, Kemya, Petro Rabigh, SABIC
Responsibilities: -
Layout, Stress, Material: Involve in preparation & review of engineering documents, Review material
Spec, preparing design details,
Review technical bid evaluations, vendor drawing review & approvals; review Stress Analysis reports
with good knowledge of Codes & standards: Aramco and International Codes & Standards
Prepare & Review Engineering studies, design drawings with the following standards & procedures:
SAES-B-055, SAES-A-202, SAEP-110. ASME B31.3 and ISO14692.
Prepare & review Material & equipment specifications with the following Standards:
ASMEB31.3SAES-L-105, ASMEB16.5 ASME B16.47, SAES, and SAEP & SAMSS, ASTM,
NACEMR0175, 0103, MSS-SP, BS
Resolve engineering issues by applying acceptable Codes and Standards: ASME 31.3, ASME31.4,
ASME31.8, ISO14692, API, AWWA M45, and SAES, Shell.
Familiar with Engineering Practices, calculation methods and international procedures (i.e., SABP,
SAEP, ISO 14692, API, Shell DEP& SP’s)
Preparing & review GRP/GRE, RTR design, Analysis and Technical details with good knowledge of
Aramco Engineering practices, Codes & Standards (ISO 14697
Review of Stress Reports.
Review of Pipe Support Standards and development of Support drawings
Client: SASREF (Saudi Aramco Jubail Refinery project)
Title: Project Management -Piping
Reporting: Program manager
Start/End Dates: Jan-2018-Aug-2018
Responsibility:
Reviewing documents, vendor documents, drawings submitted by Engineering contractors /sub-
contractors and get approvals from Clients.
Attending Clients and contractor’s meetings for scheduling project activities for material procurement
Reviewing as built drawing and material takeoff.
Reviewing project Scope of work
Reviewing QMP and SQP
Reviewing Shutdown scope and scheduling engineering and procurement activities
Reviewing client project Specification and compliance with the project scope
Reviewing engineering deliverables to meet the project schedule.
Reviewing contractors’ scope of work and schedules for documents and procurement to meet client
schedule.
SAMSUNG ENGINEERING, COUNTRY: SAUDI ARABIA (AL-JUBAIL):
Client: ARAMCO
3
Title: Sr. Piping / Flexibility Engineer
Start/End Dates: 2-2012 to 3-2015
Project: Aramco Clean Transportation Fuels at Riyadh Refinery Project (RCTF) – Detail Engineering.
Job Title: Sr. Piping Engineer.
Responsibilities:
Review of documents & drawings.
Site Survey with contractor and vendor representatives.
Review flexibility Design Basis.
Review of Vendor equipment drawings
Develop Piping Stress Isometric Drawings.
Prepare & supervise scope of work, Review of material requisitions, material take-offs; technical bid
evaluations; vendor drawing review & approvals (NMR’s) with the following Standards:
ASMEB31.3, SAES-L-105, ASME B16.5 ASME B16.47, SAES, and SAEP & SAMSS, ASTM,
NACEMR0175, 0103, MSS-SP, BS
Review design instructions for project; technical queries after study of project ITB documents.
Prepare & review & approve of NDT,
Prepare & review Insulation Spec, Painting Spec. (SAES-H-001,002)
Prepare & review of stress packages. Inter discipline Coordination
Review of Stress Reports.
Review of Pipe Support Standards and development of Support drawings
Project: Co2 Injection Facility Project Job Title: Sr. Piping Engineer.
Responsibilities:
Prepare & supervise scope of work, Review of material requisitions, material take-offs; technical bid
evaluations; vendor drawing review & approvals (NMR’s) with the following Standards:
ASMEB31.3, SAES-L-105, ASME B16.5 ASME B16.47, SAES, and SAEP & SAMSS, ASTM,
NACEMR0175,0103, MSS-SP, BS
Review design instructions for project; technical queries after study of project ITB documents.
Prepare & review & approve of NDT,
Prepare & review Insulation Spec, Painting Spec. (SAES-H-001, SAES-H002, PIP)
Prepare & review of stress packages. Inter discipline Coordination
Codes, Standards & Procedures: Applicable: ASME B 31.3, SAES-L-105,132, SAESH-
001,002,310,133, SAMSS, SAEP, PIP
Project: LUBEREF Yanbu Refinery Expansion – PDA Revamp – Proposal/Bidding
Job Title: Sr. Piping Engineer.
Responsibilities: Piping materials scope of work for proposal job.
Project: Clean Transportation Fuels, Riyadh Refinery - Proposal/bidding Job
Job Title: Sr. Piping Engineer.
Responsibilities: piping materials engineering work for proposal job.
COMPOSITE PIPE INDUSTRY, COUNTRY: OMAN (SOHAR).
Client: Petroleum Development of Oman -PDO
Title: Deputy Engineering Manager.
4
Start/End Dates: 8-2009 to 1-2012
Project: Jubal-IV & Yanbu-III Project
Responsibilities:
Manage engineering work & responsible for all client requested drawings & deliverables. Quality
check, Kick of meetings, Project meetings review Stress & surge Analysis packages review.
Codes, Standards & Procedures Applicable: ASME B 31.3, Shall DEP’s & SP’s, ISO 14692
Review all Engineering documents & responsible for deliverables,
Review and approve Stress Analysis report using CAESAR-II, Surge Analysis using PIPENET
Familiar with Engineering Practices, calculation methods and international procedures (i.e., ISO
14692, API, Shell DEP& SP’s)
Review GRP/GRE, RTR design, Analysis and technical details with good knowledge of Shell DEP &
SP’s, Codes & Standards (ISO 14692, API, ASME, ASTM, and BS).
DODSAL ENGINEERING L.L.C COUNTRY: OMAN (MUSCAT).
Client: Petroleum Development of Oman-PDO
Title: Lead piping/pipeline Engineer
Start/End Dates: 08-2007 to 05-2009
Project: Qarn Alam Steam Project
Responsibilities:
Review all Engineering documents & deliverables, Quality check, Kick of meetings.
Codes, Standards & Procedures Applicable: ASME B 31.3, Shall DEP’s & SP’s, ISO 14692
Review all Engineering documents & responsible for deliverables
Review Stress Analysis report using CAESAR-II,
Familiar with Engineering Practices, calculation methods and international procedures (i.e., ISO
14692, API, Shell DEP& SP’s)
Preparing & review GRP/GRE, RTR design, Analysis and technical details with good knowledge
Shell DEP & SP’s practices, codes & standards (ISO 14697, ASME, ASTM API, BS)
CORE ENGINEERING, COUNTRY: SAUDI ARABIA (DAMMAM).
Client: Sub-Contract to: Amiantit Fiberglass Industries, Al BAYRONI
Title: Sr piping/pipeline Engineer-GRE
Start/End Dates: 10-2004 to 08-2007
Responsibilities:
Prepare & review Stress Analysis report using CAESAR II,
Review all Engineering documents & responsible for deliverables, Quality check, Kick of meetings
with client
Codes, Standards & Procedures Applicable: SAES, SAEP, SABIC, ASME B31.3, ASTM, SABIC,
DOW, ISO, API
Technical Skills:
Familiar with Software such as CAESAR II, Navisworks, SPR, AutoCAD & Navisworks
Proficiency in using MS Office Package (Word, Excel, PowerPoint).
Piping Engineering: IIT-Bombay. May 2003.
5
Financial Management and Costing, Tribology and Bearing Design.
Skills:
Vendor Management
Team Management
Risk management
Quality Management
Conflict Management
Membership and Affiliations:
Saudi Council of Engineers: 190786
NACE International-Jubail: NACEJ/13/675
APEGA Member id: 231801
Driving Licenses:
Canada
Oman
Saudi Arabia
India
Languages:
English, Telugu, Hindi, and Urdu
Place:
Date:
(SYED ASIF ALI)
