Instruction Manual
1. Description:
The equipment is used as a termination point for the feeder cable to connect with
drop cable in FTTx communication network system. The fiber splicing, splitting, and
distribution can be done in this box, and meanwhile it provides solid protection and
management for the FTTx network building.
2. Features:
1. Total enclosed structure.
2. Material:PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up
to IP65.
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage,
distribution...etc all in one.
4. Cable, pigtails, and patch cords are running through their own paths without
disturbing each other, micro type PLC splitter installation, easy maintenance.
5. Distribution panel can be flipped up, feeder cable can be placed by expression port,
easy for maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both
indoor and outdoor use.
3. Specification:
1. Environmental requirement
Working temperature: -40℃～+85℃
Relative humidity: ≤85% (+30℃)
Atmospheric pressure: 70KPa~106Kpa
2. Main technical datasheet
Insertion loss: ≤0.15dB
UPC return loss: ≥50dB
APC return loss: ≥60dB
3. Thunder-proof technical datasheet
The insulation resistance between the grounding device and the metal parts of the box
is no less than 2 104 MΩ/500V (DC); IR≥2 10 4 MΩ/500V.
The voltage resistance between the grounding device, and the box and its metal parts is
no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V
4. Configuration table:
Table 1 Model and configuration
Installation Size Into the largest Maximum size
Size (Pic 1) Max Waterproof SC/AP
Model (Pic 2) cable diameter of branch hole
A*B*C (mm) Capacity C adapter
D*E*F(mm) (mm) (mm)
16 CORE 319.3*214*133 48 52*166*166 ᴓ8~14 ᴓ16 16
Pic 1 Box Size Pic 2 Installation Size
Instruction Manual
5. Product cable ways:
5.1 Product cable ways:
5.2 Fast Plug
Fast installation, fastening, and sealing of straight-through optical cable with the Fast
Plug.
Instruction Manual
5.3 Fiber optic cable bifurcation
5.4 Product cable ways:
Pic 3 Cable Ways
5.5 Splicing tray
Item Splicing tray A Splicing tray B
Dimensions(H x W x D; unit: mm) 134*104*8 134*104*4
Net weight (unit: kg) 0.021 0.015
Picture
Color Customizable Customizable
Material PC+ABS PC+ABS
Splicing capacity of a tray(cores) 12, 1 slot for 1/8 PLC 8
6. Installation:
1. Wall-mounted installation
Drill 3 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40,
place the box to match up the holes and use bolt to fasten(Pic 4).
2. Pole-mounted installation
Instruction Manual
Fix 1 set of the pole ring to the telecom pole (Pic 5).
3. The overhead structure
Tie the two installed on the chassis of the overhead hung on the wire, and then bolted,
prevent the case fall off.(Pic 6)
Pic 4 Wall mounted installation
Pic 5 Pole mounted installation
Pic 6 The overhead structure
7. Fiber connector installation:
Instruction Manual
Pic 7 Rotate the arrow part of fiber connector counterclockwise and take out the
dust cap.
Pic 8 The arrow part of fiber connector is above, insert fiber connector into the
socket and then rotate the arrow part clockwise.
8. Accessories:
1. Users' Manual*1
2. Accessories Bag*1
3. Pole Ring*2 (Option)
