Scribd
Upload
95 views1 page

Lanyard Inspection Checklist Form

The document outlines an inspection form for lanyards, detailing the necessary checks for hardware, webbing, stitching, and labels/tags in compliance with OSHA regulations. It specifies that personal fall arrest systems must be inspected before each use and by a competent person at least annually. The form includes sections for recording inspection results and identifying any defects that require removal from service.

Uploaded by

Γιωργος Γεωργιου
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views1 page

Lanyard Inspection Checklist Form

The document outlines an inspection form for lanyards, detailing the necessary checks for hardware, webbing, stitching, and labels/tags in compliance with OSHA regulations. It specifies that personal fall arrest systems must be inspected before each use and by a competent person at least annually. The form includes sections for recording inspection results and identifying any defects that require removal from service.

Uploaded by

Γιωργος Γεωργιου
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

INSPECTION FORM: Lanyard

LOOK AT: 1 HARDWARE 2 WEBBING


OSHA 1926.502(d)(21)
Personal fall arrest systems SHALL be inspected prior to each 3 STITCHING 4 LABELS/TAGS
use for wear, damage, and other deterioration, and defective
components SHALL be removed from service. R PASS T FAIL

6.1 Inspection 1 HARDWARE R T


6.1.1 Equipment SHALL be inspected by the user before each
Rust/corrosion
use and, additionally, by a competent person other than the
user at intervals of no more than one year. Deformed/bent

Burrs/cracks
Frequency of inspection in the following categories: Weld spots/slag
General Industry: _______________ Construction:________________ Missing rivets

Your Organization:_______________ Manufacturer:_______________ Springs

Functionality
Manufacturer of equipment:
Other
Name of Manufacturer: _______________________________________

Serial #:________________________ Model #:____________________


2 WEBBING R T
Cuts/burns/holes
Date of Manufacture: ____ /____ /____
Excessive wear

Inspection: Remove from service when: Excessive UV damage

Date: ____ /____ /____ Date: ____ /____ /____ Chemical attack

Writing on the webbing


Name of competent person: Other
____________________________________________________________
3 STITCHING R T
Name of user (authorized person): Missing
____________________________________________________________ Loose

Broken

Other

4 LABELS/TAGS R T
Missing

Illegible

Dates

Other

*See user instruction manual for complete inspection procedures and requirements.

© 2021 FallTech 1306 S. Alameda St. Compton, CA 90221 800-719-4619 [Link]


07/2021

You might also like