This set of Artificial Intelligence Multiple Choice Questions &Answers (MCQs) focuses on "Robotics -1".
1. What is the name for information sent from robot sensors to robot controllers?
a) temperature
b) pressure
c) feedback
d) signal
View Answer
Answer:c
Explanation: None.
2. Which of the following terms refers to the rotational motion of a robot arm?
a) swivel
b) axle
c) retrograde
d) roll
View Answer
Answer: d
Explanation: None.
3. What is the name for space inside which a robot unit operates?
a) environment
b) spatial base
c) work envelope
d) exclusion zone
View Answer
Answer: c
Explanation: None.
4. Which of the following terms IS NOT one of the five basic parts of a robot?
a) peripheral tools
b) end effectors
c) controller
d) drive
View Answer
Answer: a
Explanation: None.
5. Decision support programs are designed to help managers make
a) budget projections
b) visual presentations
c) business decisions
d) vacation schedules
View Answer
Answer: c
Explanation: None.
6. PROLOG is an Al programming language which solves problems with a form of symbolic logic known
as predicate calculus. It was developed in 1972 at the University of Marseilles by a team of specialists.
Can you name the person who headed this team?
a) Alain Colmerauer
b) Niklaus Wirth
c) Seymour Papert
d) John McCarthy
View Answer
Answer: a
Explanation: None.
7. The number of moveable joints in the base, the arm, and the end effect ors of the robot
determines
a) degrees of freedom
b) payload capacity
c) operational limits
d) flexibility
View Answer
Answer: a
Explanation: None.
8. Which of the following places would be LEAST likely to include operational robots?
a) warehouse
b) factory
c) hospitals
d) private homes
View Answer
Answer: d
Explanation: None.
9. For a robot unit to be considered a functional industrial robot, typically, how many degrees of
freedom would the robot have?
a) three
b) four
c) six
d) eight
View Answer
Answer: c
Explanation: None.
10. Which of the basic parts of a robot unit would include the computer circuitry that could be
programmed to determine what the robot would do?
a) sensor
b) controller
c) arm
d) end effector
View Answer
Answer: b
Explanation: None.
This set of Artificial Intelligence (AI) MCQs focuses on "Robotics - 2".
1. Which of the following terms refers to the use of compressed gasses to drive (power) the robot
device?
a) pneumatic
b) hydraulic
c) piezoelectric
d) photosensitive
View Answer
Answer: a
Explanation: None.
2. With regard to the physics of power systems used operate robots, which statement or statements are
most correct?
a) hydraulics involves the compression of liquids
b) hydraulics involves the compression of air
c) pneumatics involve the compression of air
d) chemical batteries produce AC power
View Answer
Answer:c
Explanation: None.
3. The original LISP machines produced by both LMI and Symbolics were based on research performed
at
a) CMU
b) MIT
c) Stanford University
d) RAMD
View Answer
Answer:b
Explanation: None.
4. Which of the following statements concerning the implementation of robotic systems is correct?
a) implementation of robots CAN save existing jobs
b) implementation of robots CAN Create new jobs
c) robotics could prevent a business from closing
d) all of the mentioned
View Answer
Answer: d
Explanation: None.
5. Which of the following IS NOT one of the advantages associated with a robotics implementation
program?
a) Low costs for hardware and software
b) Robots work continuously around the clock
c) Quality of manufactured goods can be improved
d) Reduced comparny cost for worker fringe benefits
View Answer
Answer: a
Explanation: None.
6. Which of the following "laws" is Asimov's first and most important law of robotics?
a) robot actions must never result in damage to the robot
b) robots must never take actions harmful to humans
c) robots must follow the directions given by humans
d) robots must mnake business a greater profit
View Answer
Answer: b
Explanation: None.
7. In LISP, the function returnst if <object> is a CONS cell and nil otherwise
a) (cons <object>)
b) (consp <object>)
c) (eq <object>)
d) (cous = <object>)
View Answer
Answer: b
Explanation: None.
8. In a rule-based system, procedural domain knowledge is in the form of
a) production rules
b) rule interpreters
c) meta-rules
d) control rules
View Answer
Answer: a
Explanation: None.
9. If a robot can alter its own trajectory in response to external conditions, it is considered to be
a) intelligent
b) mobile
c) open loop
d) non-servo
View Answer
Answer: a
Explanation: None.
10. One of the leading American robotics centers is the Robotics Institute located at?
a) CMU
b) MIT
c) RAND
d) SRI
View Answer
Answer: a
Explanation: None.
1-Robot is derived from Czech word
(A)Rabota
(B) Robota
(C) Rebota
(D) Ribota
2-A Robot is a
(A) Programmable
(B) Multifunctional manipulator
(C) Both (A) and (B)
(D) None of the above
3-The main objective(s) of Industrial robot is to
(A)To minimise the labour requirement
(B) To increase productivity
(C) To enhance the life of production machines
(D) Allof the above
4-The following is true for a Robot and NC Machine
(A) Similar power drive technologyis used in both
(B) Different feedback systems are used in both
(C) Programming is same for both
(D) All of the above
5-Match the following
Robot part Function
a. Manipulator arm 1. For holding a piece or tool
b. Controllers 2. Move the manipulator arm and end effector
c. Drives 3. Number of degrees of freedom of movement
d. Gripper 4. Delivers commands to the actuators
(A)a-1, b-4, c-2, d-3
(B) a-3, b-4, c-2, d-1
Download
(D) All of the above
10-The Robot designed with Cartesian coordinate systems has
(A) Three linear movements
(B) Three rotational movements
(C) Two linear and one rotational movement
(D) Two rotational and one linear movement
11-The Robot designed with Polar coordinate systems has
(A) Three linear movements
(B) Three rotational movements
(C) Two linear and one rotational movement
(D) TWo rotational and one linear movement
12-The Robot designed with cylindrical coordinate systems has
(A) Three linear movements
(B) Three rotational movements
(C)Two linearand one rotational movement
(D)Two rotational and one linear movement
13-Which of the following work is done by General purpose robot?
(A) Part picking
(B) Welding
(C) Spray painting
(D)All of the above
14-The following drive is used for lighter class of Robot.
(A) Pneumatic drive
(B) Hydraulicdrive
() Electric drive
(D) Allof the above
15-Internal state sensors are used for measuring of the end effector.
(A) Position
(B) Position & Velocity
(C) Velocity & Acceleration
(D) Position, Velocity &Acceleration
16-Which of the following sensors determines the relationship of the robot and its
environment and the objects handled by it
(A)Internal State sensors
(B) External State sensors
(C)Both (A) and (B)
(D) None of the above
17-Which of the following is not a programming language for computer controlled
robot?
(A) AMU
(B) VAL
() RAIL
(D) HELP
18-In which of the following operations Continuous Path System is used
(A) Pick and Place
(B) Loading and Unloading
(C) Continuous welding
(D) Allof the above
ANSWERS:
1-(B), 2-(C), 3-(D), 4-(A), 5-(B), 6-(A), 7-(C), 8-(A), 9-(D), 10-(A), 11-(D), 12-(C), 13-(D),
14-(A), 15-(D), 16-(C), 17-(A), 18-(C)
