DATA SHEET FOR
TRIPLE OFFSET BUTTERFLY VALVE
VENDOR
STANDARD FIELDS DESCRIPTION ACCEPTANCE /
DEVIATIONS
SERVICE / SERVICE CODE LPG Service 1
DESIGN TEMPERATURE (oC) -27 / 65 2
DESIGN PRESSURE (kg/cm2g) 14.5 3
CLASS / PRESSURE RATING 300# 4
SIZE RANGE 2" & ABOVE 5
END CONNECTION FLANGED, RAISED FACE, SERRATED FINISH 6
GENERAL
FLANGE FACE FINISH 125 µIn AARH 7
TRIPLE OFFSET HIGH PERFORMANCE,
BIDIRECTIONAL TIGHT SHUT OFF, ECCENTRIC,
METAL TO METAL SEATED, NON-RUBBING,
VALVE TYPE TORQUE SEATED, DOUBLE FLANGE END, LONG 8
PATTERN, QUARTER TURN, ANTI-STATIC, ANTI
BLOW-OUT, STEM ARRANGEMENT BUTTERFLY
VALVE
BODY ASTM A 216 GR.WCB CASTING 9
STEM ANTI BLOWOUT 10
CONSTRUCTION
DISC TRIPLE OFFSET, 11
PORT FULL BORE FOR TOB VALVES 12
DETAILS
SHAFT ANTI STATIC 13
OPEN / CLOSE POSITION FOR
SPRING RETURN CLOSE ON ABSENSE OF AIR 14
GLAND BOLTED 15
MODE OF OPERATION Pneumatic actuator operated 16
ASTM A 216 GR.WCB/WCC, ASTM A 351 GR.CF8M
BODY 17
/ A 351 GR.CF8 / 13% CR. STEEL
COVER CAST CARBON STEEL ASTM A216 WCB/WCC 18
MATERIAL OF CONSTRUCTION
BODY SEAT HARD FACED STELLITE 21 INTEGRAL 19
UNS S31803 (DUPLEX) + GRAPHITE / INCOLOY 825
SEAL RING 20
HARD CHROME
DISC SS ASTM A 351 GR CF8M (SOLID) / SS316 21
17-4PH / 13% CR. STEEL/ A 479 XM19 / SS316 /
STEM / SHAFT 22
SS304(NO CASTING)/ASTM A479 UNS S41000
GRAFOIL / VITON / SPIRAL WOUND SS 316 PLUS
BODY GASKET SEAL 23
GRAPHITE
DISC SEAL SS316 / SS316+GRAPHITE 24
ALLOY STEEL, ASTM A193 Gr. B7 / A194 2H/ASTM
BODY STUD & NUT 25
F738 GR A4
STEM / GLAND PACKING PTFE / GRAFOIL /GRAPHITE 26
THRUST BEARING SS 316 HARD FACED 27
LEVER GEAR OPERATION/ACTUATED 28
DUST EXCLUDER / BEARING
REQUIRED 29
PROTECTOR
REQTS
SPECIAL
QUICK EXHAUST VALVE YES AS PER TIMING REQUIRED 30
FIRE SAFE BOX NOT REQUIRED 31
API MONOGRAM ON VALVE REQUIRED 32
DESIGN STANDARD API 609 33
DIMENSIONAL STANDARD API 609, CATEGORY B 34
APPLICABLE
STANDARDS
END CONNECTION
ASME B16.5 35
STANDARD
INSPECTION & TESTING
API 598 TESTING PROCEDURE 36
STANDARD
FIRE SAFE TEST API 607, API 6FA 37
CERTIFICATION API 609 WITH MONOGRAM 38
ADDITIONAL REQUIREMENTS / NOTES : 39
1) HYDROSTATIC TEST PRESSURE: BODY: 450PSIG; SEAT 325 PSIG; AIR TEST: 80PSIG 40
41
ATTACHMENTS FOR REFERENCE : CERTIFICATES TO BE FURNISHED BY VENDOR 42
1) MATERIAL TEST REQUIRED 43
2) PRESSURE TEST REQUIRED 44
3) RADIOGRAPHY 100% REQUIRED 45
4) FIRE SAFE TEST REQUIRED 46
5) IBR APPROVAL NA 47
6) NACE REQT. NA 48
NOTES
1. THIS VALVE SPEC SHEET SHOULD BE READ IN CONJUNCTION WITH TECHNICAL NOTES
FOR VALVES.
2. BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL
OF VALVE IN THE
3. SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH THESE
SPECIFICATIONS, BIDDER SHALLINDICATE, "AGREED".
4. NO CUTTING/ OVERWRITING BY BIDDER ON THIS SPEC IS ALLOWED.
5. VALVE TESTING SHALL BE AS PER API 598. HOWEVER LEAKAGE RATE SHALL BE
ISO5208 RATE A IN BOTH DIRECTION(PREFFERED & NON PREFFERED) AT FULL
RATED PRESSURE.
6. VALVES SHALL BE HIGH PERFORMANCE TYPE, TIGHT SHUT-OFF AND BI-DIRECTIONAL.
7. VALVES SHALL BE DOUBLE FLANGED TYPE TO ASME B16.47B, RF/125AARH.
8. FACE-TO FACE DIMENSIONS SHALL BE AS PER CATEGORY-B VALVES FOR API-609
VALVES.
9. VALVES SHALL BE SUITABLE FOR BOTH 'ON-OFF' AS WELL AS 'THROTTLING
SERVICE' UNDER MAXIMUMDIFFERENTIAL PRESSURE FOR THE RATING.
10. 100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
11. BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR
IN MATERIAL ASTM A193 GR. B7/A 194 GR.2H
12. VALVES SHALL BE PROVIDED WITH POSITION INDICATOR AND LOCKING DEVICE AT ANY
POSITION.
13. CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT SHALL BE
SUBMITTED ALONG WITH THEOFFER.
14. VENDOR SHALL SUBMIT VALVE DRAWING FOR APPROVAL.
15. VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE
CONDITIONS SPECIFIED IN THEDATA SHEET FOR BUTTERFLY VALVES
16. ALL VALVES SHALL BE FIRE SAFE DESIGN. FIRE SAFE TEST SHALL BE AS PER
API 607 / API RP 6FA, ASAPPLICABLE.
17. SHAFT SEAL MATERIAL (GRAFOIL) SHALL BE PROVIDED WITH CORROSION INHIBITOR.
DATA SHEET FOR
PNEUMATIC ACTUATOR FOR ROVs
VENDOR
STANDARD FIELDS DESCRIPTION ACCEPTANCE /
DEVIATIONS
TYPE ELECTRO PNEUMATIC OPERATION 1
PNEUMATIC SPRING RETURN PISTON
OPERATOR TYPE 2
TYPE, QUARTER TURN
MAKE & MODEL VTS 3
SHUT OFF DIFFERENTIAL /
kg/cm2 4
DESIGN PR.
STROKE CLOSE TIME CLOSE TIME; MAX 3 SECONDS 5
STROKE OPENING TIME 2SEC PER INCH DIA 6
SPRING ACTION (OPEN/CLOSE) FAIL SAFE TO CLOSE 7
ACTUATOR
MAX ALLOWABLE PRESSURE 7.5 kg/cm2 8
MIN REQUIRED PRESSURE 4 Kg/cm2 9
AVAILABLE AIR SUPPLY 4 - 6.5 kg/cm2 10
PNEUMATIC CONNECTION 15NB NPT-F 11
ACTUATOR ORIENTATION ALONG PIPE AXIS 12
TORQUE 130% OF VALVE BREAK TORQUE 13
NOISE LEVEL < 80dB 14
MANUAL OVERRIDE DE-CLUTCHABLE TYPE REQUIRED. 15
ALUMINIUM /DUCTILE IRON /CARBON
HOUSING 16
STEEL
HAND WHEEL REQUIRED YES 17
SPECIAL FEATURE MIN SIL2 FOR ACTUATOR 18
TYPE 3/2 WAY 19
MAKE & MODEL VTS 20
AREA CLASSIFICATION HAZARDOUS ZONE 1, GROUP IIA / IIB, T3, 21
MATERIAL BODY BRASS / ALUMINIMUM / SS304 22
SOLENOID VALVE
ACTION DIRECT 23
MANUAL RESET REQUIRED 24
INSULATION CLASS F 25
ENCLOSURE EX. PROOF 26
VOLTAGE 230V AC 27
PROCESS AIR CONNECTION 15NB NPT-F 28
CABLE ENTRY 19MM NPT-F 29
CERTIFICATION PESO APPROVAL REQUIRED 30
SPECIAL FEATURE MIN SIL2 FOR SOLENOID VALVE 31
TYPE LIMIT SWITCH 32
LIMIT SWITCH
MANUFACTURER & MODEL VTS 33
AREA CLASSIFICATION HAZARDOUS ZONE 1, GROUP IIA / IIB, T3, 34
MATERIAL BODY DIE-CAST ALUMINIMUM 35
VOLTAGE 230V AC 36
ENCLOSURE EX. PROOF 37
CABLE ENTRY & SIZE Min 2 NOS & NPT (F), 19mm dia 38
DOUBLE COMPR WITH SHROUD EExd,
CABLE GLANDS 39
NICKEL PLATED BRASS TO BE SUPPLIED
REQUIRED FOR VALVE MONITOR /
INDICATION 40
POSITION INDICATOR
TERMINALS ANTI VIBRATION CLIP ON TYPE 41
MOUNTING BRACKET SS ENCLOSURE REQUIRED 42
SPECIAL FEATURE MIN SIL2 FOR SOLENOID VALVE 43
TYPE AIR FILTER REGULATOR 44
MAKE & MODEL VTS 45
OTHERS
MESH SIZE 5 MICRONS 46
AIR TUBING SS TUBING REQD 47
PRESSURE GAUGE REQUIRED, RANGE 0-10KG/SQCM 48
PRE.GAUGE TYPE SS BOURDON PRESSURE GAUGE 49
ATTACHMENTS FOR
CERTIFICATES TO BE FURNISHED BY VENDOR
REFERENCE
1) MATERIAL TEST REQUIRED 50
2) PRESSURE TEST REQUIRED 51
3) RADIOGRAPHY NOT REQD FOR ACTUATORS 52
4) FIRE SAFE TEST REQUIRED 53
5) IBR APPROVAL NA 54
6) NACE REQT. NA 55
DATA SHEETS FOR TORQUE VALUES
ITEM VALVE VALVE TORQUE DATA MIN. ACTUATOR TORQUE ACTUATOR GENERATED ACTUATOR
NO DESCRIPTION ( TO BE FURNISHED BY VALVE REQUIRED TORQUES (NOTE 1) MODEL
MANUFACTURER) (WITH SAFETY (FOR SELECTED MODEL)
FACTOR OF 1.5)
Break Running MAX Break Running Running Stall Torque
Torque (N- torque (N- ALLOWABLE Torque (N- torque (N- torque (N- (N-m)
m) m) TORQUE m) m) m)
FOR
VALVE
STEM (N-m)
