深圳市卓茂科技有限公司

SHENZHEN ZHUOMAO TECHNOLOGY CO., LTD.

BGA Rework Station ZM-R380B Manual

NO.：ZM-SMS-03-02

Address: Building A, 4th Floor, Donghua Industrial Park, Sanwei Section,

Bao'an Road, Bao'an, Shenzhen, China

Telephone 0755-29929955 29929956 Fax 0755-29929953

Http://www.szzhuomao.com E-mail:[email protected]
 Preface

Shenzhen ZhuoMao Technology Co., Ltd. is a high-tech enterprise

involved in research, development, production and marketing. Since its
establishment, with strong technical force, faithful business philosophy, a
sound sales network, comprehensive and thoughtful after-sales service,
through the absorption and the introduction of foreign advanced
technology, we improved ourselves and won customers trust & supports
in the field of BGA rework systems and peripheral auxiliary equipment.
Company's product are sold in most cities in China and exported to
Japan, South Korea, North Africa, Vietnam, Southeast Asia, the Middle
East, Europe and the United States etc. We got a strong vitality and
higher visibility in the same industry. Our company will continue
adhering to the idea of "profession, innovation and integrity", to provide
our customers with more efficient high-quality and convenient services!
Your smile is always Zhuomao’s constant pursuit.

● Thank you so much for choosing BGA rework station ZM-R380C of

Shenzhen ZhuoMao Technology Co., Ltd.
● Before you operate the machine, please read the manual book
carefully to make sure of the safety and Superior performance of the
machine.
● As technology continues to update, Zhuo Mao Technology Co., Ltd.
has the right to modify specifications of the product before notice.
● Please take care of the accessories of the machine.
● If you have any doubt and special requirements of this equipment,
you may contact with our company at any time.
● The Company reserves the final right to interpret the Manual.

-1-
 Contents

1st 、 Introduction Features ………………………………………… 3

2nd 、installation ………………………………………………3

3rd 、Product specifications and technical parameters …………………4

4th 、Introduce of the main structure ………………………………… 5

1 Structure description …………………………………………… 5

2 Features …………………………………………………… 5

5th 、procedures Installation and operation ………………………… 6

(1) Upper temperature settings ………………………………… 6

2 use of an external computer ………………………………… 18

3 operation …………………………………………………… 20

6th 、Reballing process ……………………………………… 21

7th 、Equipment repair and maintenance …………………………… 23

(1) Replacement of the upper heating wire ……………………… 23

(2) Replacement of the lower heating plate ……………………… 24

(3) Maintenance ………………………………………………… 24

8th 、precautions …………………………………………… 25

Normal BGA welding and disordering parameters ………………… 26

-2-
1st、 Features

1. Choose imported high-precision materials (temperature sensor, PLC,

heater) to control the BGA desoldering & soldering procedures

precisely.

2. The Top (hot-air) & bottom (IR) heaters heat independently, and it can

set up 8 rising temperature segments and 8 constant temperature

segments to control. It can save 10 groups of temperature curves at the

same time.

3. This machine can be connected to a computer to be controlled more

conveniently with a built-in PC serial port and proprietary software

attached to it.

4. Choose imported high-precision thermocouple to detect top/bottom

temperature precisely.

5. Top & bottom heating can be controlled independently by the

temperature graphs. A cross-flow fan cools rapidly to protect the PCB

from deformation when welding.

6. After finishing desoldering & soldering, there is an alarming. The

machine is equipped with a vacuum suction pen to facilitate the

removing of BGA after desoldering.

7. Use a V-groove equipped with a flexible fixture for PCB positioning to

protect the PCB.

8. For large thermal capacity of PCB or other high-temperature and

-3-
 lead-free welding requirements, all can be handled easily.

2nd 、Installation

1、Be away from flammable, explosive, corrosive gas or liquid.

2、Avoid damp places, the air humidity is less than 90%.

3、Temperature -10 ℃ ~ 40 ℃, avoid direct sunlight, prolonged sun

exposure.

4 、 No dust, fibers and metal particles floating in the operational

environment.

5、The place of installation needs to be flat, solid, no vibration.

6、Place heavy objects on the body are strictly prohibited.

7、Avoid the affection of direct airflow, such as air-conditioners, heaters

or fans.

8、The back of rework station should be reserved 30CM for heat

dissipation.

9、The placing table (900 × 900 mm) be flat, the relative level of a height

750 ~ 850 mm.

10 、 Distribute wiring must be handled by a qualified professional

technician, the main line is 1.5 square feet. Equipment must be well

grounded.

11、Switch off the power after use, Power must be disabled if a long-term

no need.

-4-
3th 、Specifications

1、Power : 220V±10％ VAC 50/60 Hz;

2、 Total power: 3.25KW Max;

3、Heater power: The upper heater 0.8KW; the bottom IR heater 2.4KW;

4、Temperature control: K-type thermocouple of high closed-loop control:

Upper and lower parts independently measured;

Temperature precision is within ±3 degree.

5、Positioning mode: V-groove PCB positioning.

6、PCB size: 310×300mm Max 42×42 mm Min

7、Dimension: 445×430×600mm

8、Weight: About 25kg

9、Exterior color: Black

4th 、main structure description

1 、structure description

PL

-5-
 2 、function description

NO. NAME FUNCTION USE METHOD

Y-axis adjust Adjust the top heater

1 /
handle right and left
Z-axis adjust Adjust the top heater up
2 /
handle and down
Heating the BGA from Adjust by Z-axis
3 Heating group
top handle
Focus on the BGA
4 nozzle /
surface
Lower Feedback the true
5 /
thermometer information

6 PCB splint Support the PCB board /

Lower heating Heating the BGA from

7 /
plate bottom
Lower heat Assembly, protect the
8 /
box heating plate
Information identifying
9 nameplate /
the machine

10 Power switch Control power on and off /

Cooling Cool the PCB board Auto activated after

11
system after heating heating
Stop the PCB board from Adjust the height of
12 PCB supporter
distorting the screw
Control the top According to the
13 PLC
temperature manual

-6-
 Lower Control the lower According to the
14
Thermostat temperature manual
Top hot-air Turn left and right to
15 Adjust the top air flow
adjust adjust
Press 5 seconds to
16 start To start the machine
start it
Stop the machine during Press 5 seconds to
17 stop
working stop it
Cooling Switch cooling manual
18 /
manual/Auto and automatic

5th 、Program setting and operating instructions

(1)、Top temperature Program setting:

1、Thermostat button interface and Features introduction

PV410
10 11
PV

8
DISP
SELE
EV COM
SV SET

9 PUN
AT
MV MAN
PROG
RUN
PROG
AUTO
HAND
SV AL1
PTN PAR

7 PV410
PTN PRO STEP OUT1 OUT2
SET

BIP

6 5 4 3 2 1

-7-
NO. item explain
PAR
SET parameter setup key
AUTO
HAND Auto / Hand switching button
1
Number increase

Number decrease
PIN
Curve group number increase
PUN
PROG Run/stop button for curve running
2
SET
PROG curves program parameter setting button
DISP
PROG Display select

OUT1 Output 1 indicator

3
OUT2 Output 2 indicator
Curve program segment NO. Display, showing
4 STEP
the running NO. of the curve procedure
curves Procedures monitoring light, when
running up of the slope section, it will display
5 PROFILE "/", when running in the platform section, it will
display "-", when running down of the slope
segment, it will display "\".
Curve program number display, display curve
6 PIN
program number
OP3 3rd Output indicator

7 AT PID self-tuning indicator

RUN Curve Running indicator

8 PV window Show measured values

-8-
 SV/MV/EV Display settings, the output value or run the
9 remainder of section, press DISP SELECT key,
window
it will show display items switch
Setting indicator, lower display shows the set
SV
value, the indicator will be lit
Output indicator, lower display shows the value,
10 MV
the indicator will be lit
Outside test light, lower display shows the set
EV
value, this indicator will light up
AL1 1st alarm indicator
Manual control indicator ----when you use the
11 MAN
manual control, the indicator light
COM when sending data the indicator light

2、Setting process
First turn on the power supply, choose the number for saving the
temperature profile: (set groups) press PTN button (can save 10 groups
temperature profiles), Press PTN groups will be changed (1, 2, 3, 4, 5,
and 0) choose one of them for temperature profiles (We take 1st group for
example)

PV
DISP

EV COM
SV SET
PROG
MV MAN
RUN AUTO
HAND

SV AL1
1 RUN
PIN PAR
SET
PIN PRO STEP OUT1 OUT2
PV410 Bip

-9-
1 、Slope setting (r) (Per second increase in temperature)

Press SET button enter into temperature curve,r1 stands for slope

the temperature will rise at the speed of 3℃ in one second 3.00

stands for 3℃/second, press number increase button to adjust. Press

PAR button enter next step.

PV
r1 DISP

EV COM
SV SET
3.00 PROG
MV MAN
RUN AUTO
HAND

SV AL1
1 RUN PIN PAR
SET
PIN PRO STEP OUT1 OUT2
PV410 Bip

2 、 Temperature setting (L)(as following picture)

Press number increase button to adjust,L1 means that this is the

temperature for segment1(L2 means that the temperature for

segment 2, and so on),160 stands for preheating temperature 160℃.

Press PAR button for confirming and enter to next step.

PV
L1 DISP

EV COM
SV SET
160.00 PROG
MV MAN
RUN AUTO
HAND

SV AL1
1 RUN
PIN PAR
SET
PIN PRO STEP OUT1 OUT2
PV410 Bip

3 、Time setting (d) as pictured

- 10 -
 D1 stands for the time how long the temperature stays at this stage.

(30 means that when the temperature reach 160℃, it will last 30

seconds.) Press number increase button to adjust. Press PAR button

for confirmation and enter to next step.

PV
d1 COM
DISP

EV
SV SET
30 PROG
MV MAN
RUN AUTO
PAR HAND
SET
SV AL1
1 RUN
PIN PAR
SET
PIN PRO STEP OUT1 OUT2
PV410 Bip

Remarks The remaining seven-segment temperature settings are

same as above exactly. If you do not need so many segments, then no

need to set. For example, if you just need 6 segments, then after you

finished segment 6 setting, then you can press PAR

SET
button enter

into segment 7 setting, press button until SV button

show END. Press PAR
SET
button, it will show the picture as following.

(It means that setting finished. This function is the highest temperature

limit, you cannot change Hb 300), press again to confirm.

- 11 -
 PV
Hb DISP

EV COM
SV SET
300 PROG
MV MAN
RUN AUTO
HAND

SV AL1
1 RUN
PIN PAR
SET

PIN PRO STEP OUT1 OUT2

PV410 Bip

REX--C10 temperature controller:

Thermostatic control adopts REX--C10 temperature controller.

s h o w a c t u a l te m p e r a tu r e

PV
s h o w s e t tin g
te m p e r a tu r e
m ove
SV
down
set
up

SET
RKC REX-C10

Hold down the adjustment button for 5-6 seconds, then the

setting of the temperature a bit flash, press numerical increase

(decrease) key to change. And then move button to move the

modified adjusted value of 10, and finally to 100, after finished,

press the SET to confirm.

- 12 -
 PV
ALM

OUT1

OUT2
SV

AT

SET

RKC REX-C10

(2)、 the use of an external computer

The device can connect with an external computer, you can

observe two temperature curves of the head of internal heating wire

and external measurement of galvanic through the computer

interface, and you also can set the temperature, time and other

parameters through the computer, but also can achieve data transfer

between computer and instrument, store many curves and facilitate

to print out. (Note: This feature is limited to the upper heating

control)

Statement: the related temperature parameters of the equipment can

be set-up and stored completely through the instrument age, but in

order to set the temperature more user-friendly, more intuitive, and

easy to store, and print the temperature curve, our company

specially developed this software！

- 13 -
1、 Software Install

1 、 Lowest requirement of computer configuration for software

installment

a. CPU P Ⅲ 800

b. Memory 128M

c. display card: 4M

d. driver: CD ROM

e. Serial Communication Interface

2 、 Software Installation，

a Put the video into the video driver, open CD driver ，

run“V2.08setup” appear language select. Choose” English” and

Click “Next” to enter Picture

- 14 -
Figure1

Figure2

b Click Next to enter Picture 2

c After enter “Picture 2”，click Next button，enter Picture 3

d Click Next ，enter Picture 4

e Click Next ，enter Picture 5

f Click Install ，enter Picture 6，start installing.

g Click Finish ，finish installing process.

- 15 -
Figure3

Figure4
- 16 -
Figure5

Figure6
- 17 -
 Figure7

2、Using of software

1 Connect the computer series port and machine communication port

with the enclosed date cable.

2 Turn on the power of the equipment.

3 、Click Zhuomao reworker.lnk

on the desktop，enter into temperature
curve recorder system interface picture 10

4)、Set the temperature, time, slope parameter for every segment.

a Click Profiles setting ，the interface will enter into (Picture 9)，

according to “welding BGA” and solder ball to set the parameter for

each segment. And for specific date and operating parameters, please

- 18 -
 refer for the construction book.

b Note 1 This software is for showing the temperature curve and

recorder, the software does not have the motion control functions,

for the movement of the machine need manual adjustment.

c Note 2 The related temperature profiles, you can set through the

meter on the machine. However, in order to facilitate the users for

temperature setting, in particular for the temperature curve showing,

save and print, so we develop and expand this software.

5 、Click download Controller” ，so the temperature for just setting

can be down load to the programmable controller.

6 、Fix the nozzle according to the BGA chip, pay attention to the top

heater work normal or not; if not, stop heating, and check what the

problem is. Otherwise it will damage the heating wire easily as the

high temperature.

7 、Fix the PCB board on the PCB pallet, and make the heating part

just below the nozzle.

8 、Adjust Z-axis and Y-axis to make the nozzle on the top of the

heating part, the height between them is 2～5mm.(Figure 8)

9 、Click Run/Stop ，the machine will carry out heating motion.

10 、At this time you can see the temperature curve.(Figure 9)

11 、Curve 1 Green shows The actual measurement of heater

temperature

- 19 -
 12 、After heating, it will automatically run cooling system; It will

reduce the deformation of the PCB board, shorten the work cycle

and improve the work efficiency through cooling.

13 、During the process of heating，Click Run/Stop ，or click Stop

on the control panel，heating process will be stop.

14 、Click "Exit System" button, the computer will quit the application

programmer.

3、Development Features Instruction (figure 9、figure 10)

1 、 Upload from Controller” Click this button can upload the internal

instrument parameter from controller to the computer; it can set a

group of data each click. Note: the programmable controller can

save 10 groups itself

2 、 download Controller” Click this button can download the

parameter from computer to the controller;

3 、Save After using the software for heating，Profile View curve

display page will show the two temperature curve, use this button

can save the curves to any position on the computer hard disk.

4 、 Open Through using this button can pick up the temperature

curve stored in computer.

5 、“Print” Through an external printer can easily print the current

curve.

6 、"X-axis maximum number (minutes) "number setting window: The

- 20 -
 maximum setting of the horizontal of the curve screen

Figure8

Figure9
- 21 -
 Figure10

4th Computer settings (upper heater)

1) Click on the icon, the screen display as (Figure 11), bottom of the

screen for setting the temperature curve parameters, drag the

cursor point 160, with reference parameter set reference value in

the table of parameters to be modified.

2) After the setting of the paragraphs parameter, click on as (Figure 11)

"to download data to the instrument" so that the data can be

stored in the instrument, (Remark: The group number displayed

on the meter number during transmission is the NO. of the data

that transmitted, the original number of the data in the instrument

will be overwritten)

- 22 -
 (3) Operation

1. Turn on the Main Power Switch, then check whether there is cold

air blow out from the top of the hot air nozzle, if not, it is strictly

prohibited to turn on switch, otherwise it will burn the top heater;

2. Set the procedures as the above method, and install the computer

data lines correctly, turn on the power supply.

3. Install the PCB board which is need to weld and the appropriate

nozzle; make the centers of the nozzle are on the center of the

PCB board, turning Y-axis adjustment handle of the heater, so

that the nozzle is at the height of 3-5mm of the top surface of the

PCB board.

4. Presses the “start”, the system will automatically heating and

welding; the temperature trend curve will appear on the screen;

5. After welding, the system will automatically alarm, and stop

heating. And then turn the Y-axis adjustable handle of the heater

upward, check the welding results. Welding process is completed.

6th 、Reballing Process

1、Fix the BGA chip on the base of our universal

reballing station; Adjust the four slipper

blocks to fix the chip to make it on the center

- 23 -
 of the reballing kit.

2、Select the appropriate steel mesh according to chip type. Fix the steel

mesh to the ceiling cover and tighten it with 4

M3 screws, covered with lid. Adjust 4 Jimmy

on the base to meet the suitable height

required.

3、Observe the hole on steel mesh which should be completely coincide

with the solder holes on BGA. If not coincide, we must remove the

cap to reposition to ensure steel mesh holes aligned with the chip,

and then lock the four screws.

4、Locking two no spring fixed slide, remove the BGA chip and coated

with a thin layer of solder flux, card the chip

into the base again, covered with lid(make sure

the right direction).

5、Put into solder ball, clench hands and gently

swaying reballing station to ensure the solder ball completely filled

in the holes and pour out extra solder balls.

6、Place the reballing station on the flat location; Remove the lid,

carefully scored BGA chips. Observe the chip,

if individual solder balls are not in the hole

rightly, please correct it with forceps.

- 24 -
 7、It is convenient to use our different types of repair stations or welding

machine to fix solder ball. Heat solders balls on the BGA to

soldering it on BGA, thus reballing finished.

7th 、repair and maintenance

(1) Replacement of top heating wire (as pictured)

fa n
to p f ix e r
p la s t ic c o n n e c to r
h e a t in g w ir e fix e r
h e a t in g w ir e
h ig h - t e m p e r a tu r e
in s u la t in g p a p e r

t o p n o z z le

cover

1、 First power off, make the top heater completely cool;

2、 The replacement of fan:

Take off the cover, and then you can replace the fan.

3、 And then take them off as following order: Cover, fan, top fixer,

Plastic connector, and heating wire fixer. (As pictured)

Remark: when you change the heating wire, it must be wrapped

by High-temperature insulating paper.

- 25 -
 (2) Replacement of the bottom heating panel (pictured)

heating pad
lock screw
fixed plate

heating panel card

heating box

1、 as pictured remove the tank cover.

2、remove the heating pad，take out heating panel card from the

back，replace the heating plate.

3、demolition the power line as required，and install the new board，

weld the power cord.

(3) Maintenance of the machine

Clean the surface of heat plate, after power off and cool the heating

plate, use fine cotton and oil or alcohol wipe it lightly.

8th 、safety precautions

1 、BGA Rework Station ZM-R380B use AC220V power, working

temperature may up to 400 ℃, Improper operation may cause

- 26 -
 damage to the equipment and even endanger the safety of the

operator. Therefore must strictly abide the following:

1 、No directly fan or other blowing air to the station when working,

otherwise it may cause damage to the equipment or components as

the distortion of heater thermometric;

2 、prohibited flammable gases or liquid around the machine; After

booting, forbidden combustibles touch high temperature district and

peripheral metal parts, otherwise it will easily cause fire or explosion;

3 、To avoid high temperature scald, forbidden touching high temperature

fever zone during working. PCB board still warm when completed,

operation process should take necessary protective measures;

4)、PCB board should be placed on V type support shelves and used slider

pairs to support PCB board in the centre; e. Metal or angular and

sharp objects are avoided on touch screen surface;

5)、upper and lower heater inlet must not be blocked, otherwise heating

wire will be damaged;

6)、After work, please guarantee natural cooling for 5 minutes, then

Switch off;

7)、if metal objects or liquid fall into rework station during working, you

should power off immediately, unplug power plug, until it cooled,

then eradicate litter and dirt; it will be influenced if grease on the

heating panels and accompanied by odor when rebooting. Please

- 27 -
 keep the machine clean and timely maintenance.

8 、 when appears abnormal warming or smoke on the machine,

immediately disconnect power and notify technical service

personnel to repair it; Remove the connections data line between

computer and devices, hold the plug to unplug the data line, to avoid

damaging internal connection.

2 if it belongs to one of the following situations, and other damage

caused by them; It will not be in the Company guarantee scope!

1、Failing uses the method in manual to operate in wrong conditions or

environmental operation;

2、The Company product outside reasons

3、Not the transformation and maintenance of the company

4、not accordance to the method stipulated when using the products

5、unpredictable situation that the company scientific technical level not

reached

6、Natural disasters or man-made destruction of non-responsibility of the

company premises.

- 28 -
 Normal BGA welding and disordering parameters

for reference

The temperature curve of lead welding

41*41 the temperature setting of the BGA welding

preheating insulation heating welding1 welding2 cooling

upper 160 185 210 235 240 225

time 30 30 35 40 20 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 180

38*38 the temperature setting of the BGA welding

preheating insulation heating welding1 welding2 cooling

upper 160 185 210 225 235 215

time 30 30 35 40 20 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 185

31*31 the temperature setting of the BGA welding

- 29 -
 preheating insulation heating welding1 welding2 cooling

upper 160 180 200 215 225 215

time 30 30 35 40 20 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 180
The upper is the reference temperature of the lead BGA

The temperature curve of Lead-free welding

41*41 the temperature setting of the BGA welding

preheating insulation heating welding1 welding2 cooling

upper 165 190 225 245 255 240

time 30 30 35 55 25 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 210

38*38 the temperature setting of the BGA welding

preheating insulation heating welding1 welding2 cooling

upper 165 190 225 245 250 235

time 30 30 35 45 25 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 210

- 30 -
31*31 the temperature setting of the BGA welding

preheating insulation heating welding1 welding2 cooling

upper 165 190 220 240 245 235

time 30 30 35 40 20 15

slope 4．0 3．0 3．0 3．0 3．0 3．0

IR 210

The upper is the reference temperature of the lead-free BGA

Such as set 0 when the demolition of the cooling section of BGA.

- 31 -