VISVESVARAYA TECHNOLOGICAL UNIVERSITY
JNANASANGAMA, BELAGAVI -590018
A Project Synopsis On
“ SPEED SENSOR USING AUDINO ”
A Synopsis Submitted in Partial Fulfillment of the B.E
Submitted by
Rajeshwari G : 2KA23EE038
Sahana A : 2KA23EE041
Shreedevi H : 2KA23EE046
Srushti T : 2KA23EE052
Under the guidance of
Mr. Shivalingappa D R
DEPARTMENT OF ELECTRICAL & ELECTRONICS
ENGINEERING
SMT. KAMALA AND SRI VENKAPPA M. AGADI COLLEGE
OF ENGINEERING AND TECHNOLOGY, LAKSHMESHWAR
2024-25
Abstract:
From the advent of increased transportation, over speeding of vehicles has become one
of the major causes for accidents and killing many lives. This paper presents a system,
developed for over-speed detection of the vehicle or human beings and alert
corresponding persons by giving buzzer automatically and also sends messages to their
mobiles. Presently, RADAR gun or LIDARS are extensively used for over speed
detection but it requires a person to pull the trigger for detecting the speed. In this work
it has been proved that automation provides better performance than a human handled
system
Introduction:
We all know that over speed is the major cause for road accidents. In this busy life
schedule, people always prefer to drive at very speed rather than low speed to reach their
respective places in time. Thus, it is necessary to understand the need of a technology
which would be used as a speed limit enforcement system. A system which helps to
limit the speed of the vehicles and the owner would be punished under the law due to
over speed and this is the best method for making people to drive at normal designated
speeds. In some places, traffic policemen are there to monitor to proper functioning of
traffic on roads and at some places, traffic places RADAR system is used and this is a
technology which is based on the Doppler Effect and with just one trigger it can
determines the speed of the vehicles. Every system whether it is a RADAR or any other
it manually requires a human to take for watching the vehicles passing by and to report
if any vehicle breaks the law or over speeds. Every system uses advancements in
technology to prioritize the automation over human handled machines. So, the traffic
monitoring system should also be made as automatic which is possible in many ways.
This paper is an idea of one of such system. The project is developed by keeping in view
all the disadvantages mentioned above and is named as Speed Check and over speed
detector. This system mainly focuses on calculating the speed of approaching vehicle
that over speeds.
Literature survey:
Vishal Pande, Malhar Malhar Mohite, Supriya Mhatre, Siddhesh Desai, Anjali
kumari, “Autonomous Speed Control of Over Speeding Vechicles Using Radio
Frequency”, International Journal of advanced Research in Electronics,
Electronics and Instrumentation Engineering Vol.4,Issue 4, April 2015
Design And Implementation of Pc Based Over Speed Violation Management For
Vehicles On Highway” by Ni Hlain, Zaw Min Htun, Hla Myo Tun International
Journal Of Scientific & Technology Research Volume 4, Issue 07, July 2015 .
Nehal Kassem, Ahmed E. Kosba and Moustafa You sef, IEEE 75th VTC
(Vehicular Technology Conference). RF-based vehicle detection and speed
estimation
“Vehicle Speed Measurement using camera as sensor” by A. Nurhadiyatna , B.
Hardjono
List of Components:
Arduino UNO R3 development board
Two IR Sensors
16*2 LCD Display with 12C module
Breadboard
Connecting wires
Methodology:
The proposed speed control system aims to monitor the speed of vehicles
precisely. When the vehicle reaches 95% of the allowable specified speed of road, the
system warns the driver. If the vehicle exceeds the deliberate speed, the system takes a
digital image of the vehicle and the license plate. The image was taken from the
discarded vehicle was placed with time, date, speed and location, through the code in the
MATLAB. The ambulances (or fire engines) are excluded because the speed is
necessary in this case to save lives. Finally, the system sends the photographs to the
competent authority.
Block diagram
Expected outcome
